132 Siemens Matsushita Components
/u/MacEater/data1/frame/SMC/FOLIEN-KOND/FMAS5-ENGLISCH/FK.B32660
MKP
7,5
Capacitance tolerance: ±10 % =ˆ K ( ±5 % =ˆ J upon request)
Special dimensions available upon request. For corresponding design rules, refer to page 238.
Ordering codes and packing units
V
R
(
V
rms ,
f
≤ 1 kHz)
C
RMaximum
dimensions
b
×
h
×
l
(mm)
Ordering code1) Packing units (pcs)
Ammo
pack Reel Untaped
1000 Vdc
(450 Vac) 0,15 nF2) 3,1 × 6,9 × 9,0 B32660-A8151-K*** 2800 2200 1200
0,22 nF 3,9 × 7,3 × 9,0 B32660-A8221-+*** 2200 1700 900
0,33 nF 4,4 × 9,1 × 9,0 B32660-A8331-+*** 2000 1600 600
1000 Vdc
(600 Vac) 0,47 nF 3,2 × 6,5 × 9,0 B32660-A8471-+*** 2700 2200 1250
0,68 nF 4,0 × 7,2 × 9,0 B32660-A8681-+*** 2100 1700 850
1,0 nF 4,9 × 8,1 × 9,0 B32660-A8102-+*** 1800 1400 600
1,5 nF 5,5 × 10,3 × 9,0 B32660-A8152-+*** 1600 1300 400
2,2 nF 5,4 × 7,6 × 9,0 B32660-A8222-+*** 1700 1300 600
3,3 nF 5,4 × 10,0 × 9,0 B32660-A8332-+*** 1600 1300 400
4,7 nF 5,4 × 14,8 × 9,0 B32660-A8472-+*** 1600 1300 300
5,6 nF 8,2 × 10,9 × 9,0 B32660-A8562-+*** −− 200
6,8 nF 9,2 × 11,2 × 9,0 B32660-A8682-+*** −− 200
1) Replace the + by the code letter for the required capacitance tolerance.
Replace the *** by the code number for the required packing form:
– For crimped leads (0,15 to 1,5 nF): Ammo pack = 249, reel = 149, untaped = 010
– For straight leads (2,2 to 6,8 nF): Ammo pack = 289, reel = 189
– The ordering code for untaped components ends after the tolerance code letter.
2) Capacitance tolerance: ±10 % =ˆ K
Capacitors with
C
R≤ 1,5 nF are only available with crimped leads.
Crimping increases the mounting height by approx. 4 mm
(also refer to “Taping and Packing”, page 279).
B 32 660