2W005G thru 2W10G Vishay General Semiconductor Glass Passivated Single-Phase Bridge Rectifier FEATURES * UL recognition, file number E54214 * Ideal for printed circuit boards ~ ~ + - + ~ ~ - e4 * Typical IR less than 0.5 A * High case dielectric strength * High surge current capability * Solder dip 260 C, 40 s Case Style WOG * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS General purpose use in ac-to-dc bridge full wave rectification for power supply, adapter, charger, lighting ballaster on consumers and home appliances applications. PRIMARY CHARACTERISTICS IF(AV) 2.0 A VRRM 50 V to 1000 V IFSM 60 A IR 5.0 A VF 1.1 V TJ max. 150 C MECHANICAL DATA Case: WOG Epoxy meets UL 94V-0 flammability rating Terminals: Silver plated leads, solderable per J-STD-002 and JESD22-B102 E4 suffix for consumer grade Polarity: As marked on body MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL 2W005G Maximum repetitive peak reverse voltage VRRM 50 Maximum RMS voltage 2W01G 2W02G 2W04G 2W06G 2W08G 2W10G UNIT 100 200 400 600 800 1000 V VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current at 0.375" (9.5 mm) lead length (Fig. 1) IF(AV) 2.0 A Peak forward surge current single sine-wave superimposed on rated load IFSM 60 A I2t 15 A 2s TJ, TSTG - 55 to + 150 C Rating for fusing (t < 8.3 ms) Operating junction and storage temperature range Document Number: 88528 Revision: 15-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 2W005G thru 2W10G Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage drop per diode 2.0 A VF 1.1 V Maximum DC reverse current at rated DC blocking voltage per diode TA = 25 C TA = 125 C IR 5.0 500 A Typical junction capacitance per diode 4.0 V, 1 MHz CJ SYMBOL 2W005G 2W01G 2W02G 2W04G 2W06G 40 2W08G 2W10G 20 UNIT pF THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL 2W005G 2W01G 2W02G RJA RJL Typical thermal resistance (1) 2W04G 2W06G 2W08G 2W10G 40 15 UNIT C/W Note: (1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5 mm) lead length P.C.B. mounting ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 1.12 51 100 Plastic bag 2W06G-E4/51 RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 60 60 Hz Resistive or Inductive Load 2.0 P.C.B. 0.375" (9.5 mm) 1.6 Copper Pads 0.22 x 0.22" (5.5 x 5.5 mm) 1.2 0.8 Capacitive Load I(pk) 5.0 = 10 I(AV) (per Leg) 20 0.4 Peak Forward Surge Current (A) Average Forward Output Current (A) 2.4 TA = 25 C Single Sine-Wave 50 40 30 20 10 1.0 Cycle 0 0 0 25 50 75 100 125 150 1 100 10 Ambient Temperature (C) Number of Cycles at 60 Hz Figure 1. Derating Curve Output Rectified Current Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88528 Revision: 15-Apr-08 2W005G thru 2W10G Vishay General Semiconductor 100 TJ = 25 C Pulse Width = 300 s 1 % Duty Cycle Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 1 0.1 0.01 0.4 0.6 0.8 1.2 1.0 1.4 10 1 0.1 1.6 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Forward Characteristics Per Diode Figure 5. Typical Junction Capacitance Per Diode 100 Transient Thermal Impedance (C/W) 100 Instantaneous Reverse Current (A) TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p TJ = 125 C 10 TJ = 100 C 1 0.1 TJ = 25 C 20 40 60 80 1 0.1 0.01 0.01 0 10 100 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Heating Time (s) Figure 4. Typical Reverse Leakage Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Case Style WOG 0.388 (9.86) 0.348 (8.84) 0.220 (5.6) 0.160 (4.1) 1.0 (25.4) MIN. 0.032 (0.81) 0.028 (0.71) 0.348 (8.84) 0.308 (7.82) 0.060 (1.52) 0.020 (0.51) 0.220 (5.6) 0.180 (4.6) 0.220 (5.6) 0.180 (4.6) Document Number: 88528 Revision: 15-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1