www.lumberg.com 09/2015
Rundsteckverbinder mit Schraubverschluss nach IEC 61076-2-106 und AISG-Spezifikation, IP68
Circular connectors with threaded joint acc. to IEC 61076-2-106 and AISG specification, IP68
Connecteurs circulaires avec verrouillage à vis suivant CEI 61076-2-106 et spécification AISG, IP68
Plug acc. to IEC 61076-2-106, IP68, with threaded joint and
solder terminals, shielded at 360°
0332-1: also complies with AISG specifications
1. Temperature range -40 °C/+85 °C
2. Materials
Insulating body PA GF, V0 according to UL 94
Contact pin 3 to 8 poles CuZn, silver and flash gold-plated
Contact pin 12 to 14 poles CuZn, pre-nickel and gold-plated
Housing CuZn, nickel-plated
Knurled screw CuZn, nickel-plated
Gasket NBR
3. Mechanical data
Mating with sockets 030..., 0321, 0322..., 036...
sockets according to IEC 61076-2-106
and IEC 60130-9
Protection1IP68
For further information see table
4. Electrical data (at Tamb 20 °C)
Attenuation see graph on page 3.64
For further information see table
1according to DIN EN 60529, only in locked position with a proper counter
part, IP X8 requirements under agreement between user and manufac-
turer
2acc. to IEC 60664/DIN EN 60664, CTI UL classification acc. to ANSI/UL 746A
0332 0332
Connecteur mâle suivant CEI 61076-2-106, IP68, avec ver-
rouillage à vis et connexion par soudure, blindé à 360°
0332-1: aussi conforme aux spécifications AISG
1. Température d’utilisation -40 °C/+85 °C
2. Matériaux
Corps isobody PA GF, V0 suivant UL 94
Contact à broche 3 à 8 pôles CuZn, argenté et doré flash
Contact à broche 12 à 14 pôles CuZn, sous-nickelé et doré
Boîtier CuZn, nickelé
Vis moletée CuZn, nickelé
Joint d’étanchéité NBR
3. Caractéristiques mécaniques
Raccordement avec connecteurs femelles 030..., 0321,
0322..., 036...
connecteurs femelles suivant
CEI 61076-2-106 et CEI 60130-9
Protection1IP68
Pour plus de détails, voir tableau
4. Caractéristiques électriques (à Tamb 20 °C)
Atténuation voir graphique à la page 3.64
Pour plus de détails, voir tableau
1suivant DIN EN 60529, uniquement à l’état verrouillé avec un propre
pendant, exigences IP X8 après entente entre utilisateur et fabricant
2suivant CEI 60664/DIN EN 60664, classification CTI UL suivant ANSI/UL 746A
Verpackung: Einzelteilesätze in Kunststoffbeuteln, im Karton
Packaging: sets of individual parts in plastic bags, in a cardboard box
Emballage: kits de pièces détachées dans sachets en plastique, dans un carton
Bestellbezeichnung
Designation
Désignation
0332 03 3 50 0,75 4–8 5 250 2 > 10 ~ 2
0332 04 4 50 0,75 4–8 5 250 2 > 10 ~ 2
0332 05 5 50 0,75 4–8 5 60 1 > 10 ~ 3
0332 05-1 5 50 0,75 4–8 5 250 2 > 10 ~ 2
0332 06 6 50 0,75 4–8 5 250 2 > 10 ~ 2
0332 07 7 50 0,75 4–8 5 250 2 > 10 ~ 2
0332 07-1 7 50 0,75 4–8 5 60 1 > 10 ~ 3
0332 08 8 50 0,75 4–8 5 60 1 > 10 ~ 3
0332 08-1 8 50 0,75 4–8 5 60 1 > 10 ~ 3
0332 12 12 50 0,25 4–8 3 60 1 > 10 ~ 3
0332 14 14 50 0,25 4–8 3 60 1 > 10 ~ 3
0332-1 05-3 5 50 0,75 4–8 5 60 1 > 10 ~ 3
0332-1 08-1 8 50 0,75 4–8 5 60 1 > 10 ~ 3
Polzahl
Poles
Pôles
Verpackungseinheit (VE)
Package unit (PU)
Unité d’emballage (UE)
Anschlussquerschnitt
Wire section
Section de racc. de fil
Kabeldurchmesser
Cable diameter
Diamètre de cable
Bemessungsstrom
Rated current
Courant assigné
Bemessungsspannung2
Rated voltage2
Tension assignée2
Prüfspannung
Test voltage
Tension d’éssai
Isolationswiderstand
Insulation resistance
Résistance d’isolement
Kontaktkapazität
Contact capacitance
Capacité de
contact
mm2mm A V AC kV AC eff. GΩpF
0332-1 0332-1