MS MS Series MS Series MS Series MS Series MS Series MS Series MS1007 MS Series MS Series MS Series MS Series The Power Behind Your MS Series Mass Spectrometer MS Series The MS Series are our custom high voltage power MS Series designed supplies for mass spectrometry (MS). MS Series model MS1007 is specifically MS Series The designed for electrospray applications. MS Series MS Series MS Series Features MS Series * Solid state polarity switching MS Series * Aluminum rectangular package voltage & current controlled by MS Series * Output external voltages MS Series* Output voltage & current monitors MS Series* TTL enable/ shutdown (high or open for HV off) MS Series* TTL polarity select (high or open for MS Series POS) voltage/current control mode MS Series* TTL indicator (high for I mode) MS Series* Short circuit & arc protection MS Series* LV RTN to HV RTN isolation: internally shorted MS Series* Case is electrically connect to LV RTN MS Serie*s LV connector: Burndy SMS24P-1 with MS Series SM20ML-1S6 contact pins connector: Alden F303D12 MS Serie**s Output Manufactured using surface mount MS Series technology MS Series MS Series MS Series es Power Supplies +8KV Polarity Switching Constant Voltage/Current Source Custom Applications The model MS1007 can be quickly and cost effectively modified for custom applications. Other output voltage and current ratings, custom control and programming features as well as special mechanical configurations are some of the many requirements that can be satisfied. Call K and M for a prompt review of your application. PIN No. 1 2 3 4 5 8 9 12 21 24 Signal 24VDC chassis & 24VDC ground Enable/Inhibit 8KV voltage readback remote output voltage control output current readback remote output current control polarity control analog ground current/voltage mode indicator SPECIFICATIONS Parameter Unit MIN Input Voltage ........................................ VDC Input Current .....................................mADC Output Current Compliance .............. -uADC Current Control Input ........................ +VDC Output Voltage Compliance ............. +kVDC Voltage Control Imput ....................... +VDC V & I Control Input Zin ...................... k-Ohm V & I Output Monitors ....................... +VDC V & I Monitor Impedence .................. k-Ohm Output ripple ........................................ vp-p Line Regulation ........................................ % Load Regulation ....................................... % Temperature Regulation ................... ppm/oC Operating Temperature ............................ o C Storage Temperature ................................ o C Operating altitude .................................. kft Storage altitude ...................................... kft 21.6 --1 0 1 0 9.5 0 9.5 --------20 -40 0 0 NOM 24 ----------10 --10 ----------------- MAX 26.4 500 100 11.3 8 8.2 10.5 10 10.5 8 0.1 0.1 250 +60 +70 +15 +50 Notes 1,3 1,3 2 Dimensions ....................................... 9.45" x 2.25" x 5" NOTES: 1. The Output Current ratio is 10uA/V +(1.5% +250nA). The Output Voltage ratio is 1kV/V + (0.75% +25V). 2. The Voltage Monitor Output is |Vout/1000| +100mV. The Current Monitor Output is |Iout x 100k| +200mV. 3. Control Inputs are internally clamped at max limits. (c)2000 by K and M Electronics, Inc. All rights reserved. Form 613B-1000 The information appearing here is believed to be reliable; however, it is not to be construed as a warranty of performance, and no express or implied warranty is made with respect to same. Any information contained herein is subject to change without notice. 11 Interstate Drive West Springfield, MA 01089-4531 USA (413) 263-6200 * 800-442-4334 * fax: (413) 737-0608 http://www.kandm.com K and M Electronics