Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Model C2327J5003A00
Rev E
Ultra Low Profile 0805
3 dB, 90° Hybrid Coupler
Description
The C2327J5003A00 is a low cost, low profile sub-miniature high
performance 3 dB coupler in an easy to use surface mount package. It is designed
for WiMax, WiBro, WiFi, ISM, and EUMTS applications. The C2327J5003A00 is
ideal for balanced power and low noise amplifiers, plus signal distribution and other
applications where low insertion loss and tight amplitude and phase balance are
required. The C2327J5003A00 is available on tape and reel for pick and place high
volume manufacturing.
All of the Xinger components are constructed from ceramic filled PTFE
composites which possess excellent electrical and mechanical stability having X and
Y thermal coefficient of expansion (CTE) of 17 ppm/°C.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Parameter Min. Typ. Max Unit
Frequency 2300 2700 MHz
Port Impedance 50 Ω
Return Loss 15 18 dB
Isolation 18 22 dB
Insertion Loss* 0.3 0.4 dB
Amplitude Balance 0.1 0.9 dB
Phase Balance (relative to 90°) 4 8 Degrees
Power Handling 4 Watts
Features:
• 2300 – 2700 MHz
• 0.7mm Height Profile
• WiMax, WiBro, WiFi, ISM &
EUMTS
• Low Insertion Loss
• High Isolation
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
Operating Temperature -55 +85 ºC
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Mechanical Outline
Dimensions are in Inches [Millimeters]
Tolerances are Non-Cumulative
.049±.004
[1.25±0.10]
.079±.004
[2.00±0.10]
1 2 3
6 5 4
Bottom View (Far-side)Side ViewTop View (Near-side)
.027±.002
[0.68±0.05]
6X .009
[0.22]
6X .012
[0.30]
Pin
3
6
1
2
4
5
Designation
Input
GND
Isolated
Direct
GND
Coupled
Orientation
Marker Denotes
Pin Location
Orientation
Marker Denotes
Pin Location
4X .026 [0.65]
.039 [0.98]
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Available on Tape and
Reel for Pick and Place
Manufacturing.
Model C2327J5003A00
Rev E
Typical Broadband Performance: 500 MHz. to 6000 MHz.
Return Loss - Input
-36
-33
-30
-27
-24
-21
-18
-15
-12
-9
-6
-3
0
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
Frequency [MHz]
[dB]
Insertion Loss
-3.600
-3.300
-3.000
-2.700
-2.400
-2.100
-1.800
-1.500
-1.200
-0.900
-0.600
-0.300
0.000
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
Frequency [MHz]
[dB]
Amp litude Balance
-2
-1.5
-1
-0.5
0
0.5
1
1.5
2
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
Frequency [MHz]
[dB]
Phase Balance
-20
-15
-10
-5
0
5
10
15
20
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
Frequency [MHz]
deg
Isolation
-36
-33
-30
-27
-24
-21
-18
-15
-12
-9
-6
-3
0
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
Frequency [MHz]
[dB]
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Model C2327J5003A00
Rev E
Typical Performance: 2200 MHz. to 2800 MHz.
Return Loss - Input
-36
-33
-30
-27
-24
-21
-18
-15
-12
-9
-6
-3
0
2200
2300
2400
2500
2600
2700
2800
Frequency [MHz]
[dB]
Insertion Loss
-3.6
-3.3
-3.0
-2.7
-2.4
-2.1
-1.8
-1.5
-1.2
-0.9
-0.6
-0.3
0.0
2200
2300
2400
2500
2600
2700
2800
Frequency [MHz]
[dB]
Amplitude Balance
-2
-1.5
-1
-0.5
0
0.5
1
1.5
2
2200
2300
2400
2500
2600
2700
2800
Frequency [MHz]
[dB]
Phase Balance
-20
-15
-10
-5
0
5
10
15
20
2200
2300
2400
2500
2600
2700
2800
Frequency [MHz]
deg
Isolation
-36
-33
-30
-27
-24
-21
-18
-15
-12
-9
-6
-3
0
2200
2300
2400
2500
2600
2700
2800
Frequency [MHz]
[dB]
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Available on Tape and
Reel for Pick and Place
Manufacturing.
Model C2327J5003A00
Rev E
Mounting Configuration:
In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be
used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet
published specifications.
All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical
and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/oC.
An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the
transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying
pick and place equipment tolerances.
Mounting Footprint
Dimensions are in Inches [Millimeters]
.026
[0.66]
6X .013
[0.33]
4X .012
[0.30]
Plated thru
holes to
ground
Circuit Pattern
Footprint Pad (s)
Solder Resist
6X .014
[0.35]
6X .002
[0.05]
4X Transmission
Line
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Model C2327J5003A00
Rev E
Packaging and Ordering Information
Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order
quantities are 4000 per reel. See Model Numbers below for further ordering information.
B
ØA ØC
REEL DIMENSIONS (inches [mm])
ØA
B
ØC
0.32 [8.0]
2.0 [50.8]
7.00 [177.8]
4000
QUANTITY/REEL
TABLE 1
ØD
0.512 [13.0]
ØD
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Available on Tape and
Reel for Pick and Place
Manufacturing.
Model C2327J5003A00
Rev E
