Round Water-resistant Connectors (M8/S8) XS3 CSMXS3DSE76 Small Round Water-resistive Connectors * Water-resistive, compact connector meets IP67 requirements. * Conventional M8 screw-on models are available along with S8 snap-in models that connect and disconnect with one touch. * Ideal for a wide variety of FA and OA applications. * Connectors on both cable ends require no harness work. * Some new M8 models with 3 or 5 poles. * Oil-resistant Polyurethane Robot Cables added. * M8-M12 conversion cables are also available. Refer to Safety Precautions on page 24. Model Number Legend Connectors with Cables Model Number Legend Connector Cable specifications Robot cable Connectors on both cable ends Oil-resistant (PUR) robot cable Standard cable Connector on one cable end (Socket) Robot cable Oil-resistant (PUR) robot cable PUR (low-temperature use) cable Connector on one cable end (Plug) Robot cable Oil-resistant (PUR) robot cable XS3: M8 screw connection Cable length (m) 1 2 5 1 2 5 2 5 10 1 2 5 10 2 5 2 5 0.3 1 2 5 Model XS3W-M421-401-R XS3W-M421-402-R XS3W-M421-405-R XS3W-M421-401-PR XS3W-M421-402-PR XS3W-M421-405-PR XS3F-M421-402-A XS3F-M421-405-A XS3F-M421-410-A XS3F-M421-401-R XS3F-M421-402-R XS3F-M421-405-R XS3F-M421-410-R XS3F-M421-402-PR XS3F-M421-405-PR XS3F-M421-402-L XS3F-M421-405-L XS3H-M421-4C3-R XS3H-M421-401-R XS3H-M421-402-PR XS3H-M421-405-PR Reference page 4 9 14 Note: Only DC, straight, and 4-core types are shown in this table. Refer to the relevant pages for other products. 1 XS3 Ratings and Specifications Item Model Rated current Rated voltage Contact resistance (connector) Insulation resistance Dielectric strength (connector) Degree of protection Insertion tolerance Cable tensile strength *1 Ambient operating temperature range Ambient humidity range XS3F-M52@-5@@-A 3 ADC 30 VDC XS3F/H/W/P/M 1 ADC 125 VDC *2 XS3M-M524-1@ 40 m max. (20 mV max., 100mA max.) XS3R 1 ADC 125 VDC 60 m max. (20 mV max., 100 mA max.) 1,000 M min. (at 500 VDC) 1,000 VAC for 1 min (leakage current: 1 mA max.) 650 VAC for 1 min (leakage current: 1 mA max.) 1,000 VAC for 1 min (leakage current: 1 mA max.) -25 to 85C -25 to 70C IP67 (IEC60529) 200 times 49 N/15 s -25 to 70C *3 20 to 85%RH *1. Models with cable only *2. Except 5 poles *3. Use the robot cable within a temperature range between 0C and 70C to prevent the wires inside the cable from being broken when bending it. Materials and Finish Connector Type M8 S8 Item Model XS3F/H/W/R XS3P/M * XS3M-M524-1@ XS3F/W (Socket side) XS3H/W (Plug side) XS3P Contact block PBT resin (UL94 V-0) light gray or black Phosphor bronze/nickel Brass/nickel base, Phosphor bronze/nickel Brass/nickel base, Contacts base, 0.4-m gold plating 0.4-m gold plating base, 0.4-m gold plating 0.4-m gold plating Fixture Brass/nickel plating or SUS316L -- Brass/nickel plating -- Brass/ Nickel-plated zinc Body -- -- nickel plating alloy Shell -- TPEE Phosphor bronze/ C-Ring -- -- tin plating Phosphor bronze/ Grounding fixture -- -- tin plating Nut -- Brass/nickel plating -- Brass/nickel plating Soft PBT resin Cover -- TPEE -- (UL94V-0) O-ring Rubber *Except 5 poles Note: The XS3M is for both M8 and S8. Cables Item Poles 3 poles 4 mm dia, AWG24 (0.2 mm2) Structure: 0.12 mm/18 4 mm dia, AWG24 (0.2 mm2) Structure: 0.08 mm/40 Standard cable Robot Cable Oil-resistant polyurethane robot cable 4 poles 5 poles 4.7 mm dia, AWG24 (0.2 mm2) Structure: 0.16 mm/11 -- 4.7 mm dia, AWG22 (0.3 mm2) Structure: 0.08 mm/60 -- -- Note: Only the XS3F (socket) is available with 5 poles. Pin Arrangement (Engaged Side) Item Poles Male (plug) contacts 3 poles 4 1 3 4 poles 2 4 1 3 5 poles 2 4 1 3 5 DC Female (socket) contacts 4 3 1 4 2 3 1 4 2 3 1 5 2 XS3 XS3W Connectors with Cables, Connectors on Both Cable Ends (Socket/Plug) Model Number Legend Use this model number legend to identify products from their model number. Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS3W-@@2@-@@@-@ 1 1. Fastening Method M: M8 S: S8 2. Connector Poles 3: 3 poles 4: 4 poles 2 3 4 5 6 3. Cable Connection Direction 1: Straight/Straight 2: Right-angle/Right-angle 3: Straight (socket)/ Right-angle (plug) 4: Right-angle (socket)/ Straight (plug) 4. Connections Pin No. 3: Brown Blue Black Pin No. 4: Brown White Blue Black 5. Cable Length 01: 1 m 02: 2 m 05: 5 m 6. Cable Specifications R: Vibration-proof robot cable PR: Oil-resistant polyurethane robot cable Ordering Information M8 Screw-on Connectors Cable specifications No. of cable cores 3 Cable connection direction Straight/Straight Straight/Straight Vibration-proof robot cable 4 Right-angle/Right-angle Straight (Socket)/Right-angled (Plug) Right-angle (socket)/Straight (plug) Straight/Straight Right-angle/Right-angle Oil-resistant polyurethane robot cable 4 Straight (Socket)/Right-angled (Plug) Right-angle (socket)/Straight (plug) Cable length L (m) Model 1 XS3W-M321-301-R 2 XS3W-M321-302-R 5 XS3W-M321-305-R 1 XS3W-M421-401-R 2 XS3W-M421-402-R 5 XS3W-M421-405-R 2 XS3W-M422-402-R 5 XS3W-M422-405-R 2 XS3W-M423-402-R 5 XS3W-M423-405-R 2 XS3W-M424-402-R 5 XS3W-M424-405-R 1 XS3W-M421-401-PR 2 XS3W-M421-402-PR 5 XS3W-M421-405-PR 1 XS3W-M422-401-PR 2 XS3W-M422-402-PR 5 XS3W-M422-405-PR 1 XS3W-M423-401-PR 2 XS3W-M423-402-PR 5 XS3W-M423-405-PR 1 XS3W-M424-401-PR 2 XS3W-M424-402-PR 5 XS3W-M424-405-PR 3 XS3 S8 Snap-in Connectors Cable specifications No. of cable cores Cable connection direction Straight/Straight Vibration-proof robot cable Right-angle/Right-angle 4 Straight (Socket)/Right-angled (Plug) Right-angle (socket)/Straight (plug) Cable length L (m) Model 1 XS3W-S421-401-R 2 XS3W-S421-402-R 5 XS3W-S421-405-R 2 XS3W-S422-402-R 5 XS3W-S422-405-R 2 XS3W-S423-402-R 5 XS3W-S423-405-R 2 XS3W-S424-402-R 5 XS3W-S424-405-R Note: Ask your OMRON representative about other cable lengths. Wiring Diagram/Engaged Side 3 poles 4 3 1 Cable lead colors Pin No. 1 1 Brown 3 4 3 4 Blue Black Socket 4 poles 4 2 3 1 4 1 3 Plug Cable lead colors Pin No. 1 2 3 4 1 2 3 4 Socket Brown White Blue Black 2 4 1 3 Plug Mating Connectors Model Socket side XS3W (M8) XS3M (M8/S8) XS3H (M8) XS3W (S8) XS3M (M8/S8) XS3H (S8) Plug side XS3F (M8) XS3W (M8) XS3P (M8) XS3F (S8) XS3W (S8) XS3P (S8) Note 1. Cables can be extended with more than one XS3W. 2. M8 screw models and S8 snap-in models cannot be connected to each other. 4 XS3 Dimensions (Unit: mm) M8 Screw-on Connectors with Vibration-proof Robot Cable Straight/Straight Connectors XS3W-M321-3@@-R (3-core) XS3W-M421-4@@-R (4-core) Socket Straight (Socket)/Right-angle (Plug) Connectors XS3W-M423-4@@-R (4-core) M8 x 1.0 10 dia. 4 dia. M8 x 1.0 4 dia. Plug 21.1 9 dia. 10 dia. 9 dia. 31.4 32 31.4 23.1 L L Right-angle (Socket)/Straight (Plug) Connectors XS3W-M424-4@@-R (4-core) Right-angle/Right-angle Connectors XS3W-M422-4@@-R (4-core) 9 dia. M8 x 1.0 9 dia. 10 dia. 4 dia. M8 x 1.0 4 dia. 21.1 20.5 20.5 10 dia. 23.1 23.1 23.1 32 L L M8 Screw-on Connectors with Oil-resistant Polyurethane Robot Cable Straight/Straight Connectors XS3W-M421-4@@-PR (4-core) Straight (Socket)/Right-angle (Plug) Connectors XS3W-M423-4@@-PR (4-core) Molded part (black) Molded part (black) 4.7 dia. M8 x 1 M8 x 1 9 dia. 10 dia. 9 dia. 4.7 dia. 10 dia. 20.5 21.5 32 31.4 32 L 24.9 L Right-angle (Socket)/Straight (Plug) Connectors XS3W-M424-4@@-PR (4-core) Right-angle/Right-angle Connectors XS3W-M422-4@@-PR (4-core) Molded part (black) 10 dia. Molded part (black) 9 dia. 4.7 dia. 10 dia. M8 x 1 4.7 dia. 9 dia. 20.5 21.1 M8 x 1 21.1 21.5 31.4 24.9 24.9 L 24.9 L 5 XS3 S8 4 pin Snap-in Connectors with Vibration-proof Robot Cable Straight (Socket)/Right-angle (Plug) Connectors XS3W-S423-4@@-R Straight/Straight Connectors XS3W-S421-4@@-R 4 dia. Socket 8.2 dia. 4 dia. Plug 19.8 8.2 dia. 8.2 dia. 8.2 dia. 30.7 30.7 23.1 30.7 L L Right-angle/Straight Connectors XS3W-S424-4@@-R Right-angle/Right-angle Connectors XS3W-S422-4@@-R 8.2 dia. 8.2 dia. 8.2 dia. 4 dia. 4 dia. 19.8 19.8 19.8 8.2 dia. 23.1 23.1 L 23.1 30.7 L 6 XS3 XS3W Connectors with Cables, Connectors on Both Cable Ends (M8 Socket/M12 Plug or M8 Plug/M12 Socket) Model Number Legend Use this model number legend to identify products from their model number. Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS3W-M@2@-@C2-A 1 1. Fastening Method M: M8 2. Connector Poles 3: 3 poles 4: 4 poles 2 3 4 5 6 4. Connections 3. Cable Connection Pin No. Direction C: M8 (screw-on) socket: 3: Brown Blue Black Straight, M12 (Smartclick) Pin No. plug: Straight D: M8 (screw-on) plug: 4: Brown White Blue Black Straight, M12 (Smartclick) socket: Straight 5. Cable Length C2: 20 cm 6. Cable Specifications A: Standard cable Ordering Information Cable specifications No. of cable cores Connectors Cable length L (m) M8 socket/M12 plug 3 M8 plug/M12 socket Standard cable 0.2 M8 socket/M12 plug 4 Model XS3W-M32C-3C2-A M8 plug/M12 socket XS3W-M32D-3C2-A XS3W-M42C-4C2-A XS3W-M42D-4C2-A Wiring Diagram 3 poles 4 poles Pin No. Cable lead colors 1 1 Brown 3 4 3 4 Blue Black Pin No. 1 2 3 4 Cable lead colors 1 2 3 4 Brown White Blue Black 7 XS3 Dimensions (Unit: mm) Screw-on Connectors (M8 to M12) XS3W-M32C-3C2-A XS3W-M42C-4C2-A 200 44.7 2 31.4 14.9 dia. 3 (3 cores) 1 9 dia. 4 4 dia. Plug 1 3 4 Socket M8 x 1.0 M12 x 1.0 (4 cores) 1 3 2 4 M8 x 1.0 Smartclick Connectors (M8-M12) XS3W-M32D-3C2-A XS3W-M42D-4C2-A 200 40.7 1 32 (3 cores) 2 14.9 dia. 4 3 M12 x 1.0 10 dia. 4 dia. Socket 3 1 4 Plug M8 x 1.0 (4 cores) 3 1 4 2 M8 x 1.0 Note: For 3-core, M12 connectors, pin 2 is not connected internally. For the M12 connectors, one-touch (Smartclick) connectors that are compatible with previous screw-on M12 connectors are used. Refer to your OMRON website for details. XS5 Series Clic k! Insert fully. Rotate 1/8 turn. One-touch Connection 8 XS3 XS3F Connectors with Cables, Sockets on One Cable End Model Number Legend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS3F-@@2@-@@@-@ 1 2 1. Fastening Method M: M8 S: S8 E: M8 SUS316L Lock 2. Connector Poles 3: 3 poles 4: 4 poles 5: 5 poles 3 4 5 6 3. Cable Connection Direction 1: Straight 2: Right-angle 4. Connections Pin No. 3: Brown Blue Black Pin No. 4: Brown White Blue Black Pin No. 5: Brown White Blue Black Gray 5. Cable Length 01: 1 m 02: 2 m 05: 5 m 10: 10 m 6. Cable Specifications A: Standard cable L: PUR cable (low-temperature use) R: Vibration-proof robot cable PR: Oil-resistant polyurethane robot cable 9 XS3 Ordering Information M8 Screw-on Connectors Cable specifications No. of cable cores Cable connection direction Straight Standard cable Right-angle 3 Straight Vibration-proof robot cable Right-angle Straight Standard cable Right-angle Straight Standard SUS316L cable lock Right-angle Straight Vibration-proof robot cable 4 Right-angle Straight Oil-resistant polyurethane robot cable Right-angle Straight PUR cable (low-temperature use) Right-angle Straight Standard cable 5 Right-angle Cable length L (m) Model 2 XS3F-M321-302-A 5 XS3F-M321-305-A 2 XS3F-M322-302-A 5 XS3F-M322-305-A 1 XS3F-M321-301-R 2 XS3F-M321-302-R 5 XS3F-M321-305-R 10 XS3F-M321-310-R 2 XS3F-M322-302-R 5 XS3F-M322-305-R 2 XS3F-M421-402-A 5 XS3F-M421-405-A 10 XS3F-M421-410-A 2 XS3F-M422-402-A 5 XS3F-M422-405-A 10 XS3F-M422-410-A 2 XS3F-E421-402-A 5 XS3F-E421-405-A 2 XS3F-E422-402-A 5 XS3F-E422-405-A 1 XS3F-M421-401-R 2 XS3F-M421-402-R 5 XS3F-M421-405-R 10 XS3F-M421-410-R 1 XS3F-M422-401-R 2 XS3F-M422-402-R 5 XS3F-M422-405-R 10 XS3F-M422-410-R 2 XS3F-M421-402-PR 5 XS3F-M421-405-PR 1 XS3F-M422-401-PR 2 XS3F-M422-402-PR 5 XS3F-M422-405-PR 2 XS3F-M421-402-L 5 XS3F-M421-405-L 2 XS3F-M422-402-L 5 XS3F-M422-405-L 2 XS3F-M521-502-A 5 XS3F-M521-505-A 10 XS3F-M521-510-A 2 XS3F-M522-502-A 5 XS3F-M522-505-A 10 XS3F-M522-510-A S8 Snap-in Connectors Cable specifications No. of cable cores Cable connection direction Straight Vibration-proof robot cable 4 Right-angle Cable length L (m) Model 1 XS3F-S421-401-R 2 XS3F-S421-402-R 5 XS3F-S421-405-R 1 XS3F-S422-401-R 2 XS3F-S422-402-R 5 XS3F-S422-405-R Note: Ask your OMRON representative about other cable lengths. 10 XS3 Mating Connectors Model Mating Connectors XS3F (M8) XS3M (M8/S8), XS3H (M8), XS3W (M8) XS3F (S8) XS3M (M8/S8), XS3H (S8), XS3W (S8) Note: M8 screw models and S8 snap-in models cannot be connected to each other. Dimensions (Unit: mm) M8 Screw-on Connectors (3-core) Straight Connectors XS3F-M321-3@@-A Vibration-proof robot cable XS3F-M321-3@@-R Standard cable M8 x 1.0 4 dia. 4 3 1 9 dia. 1.75 21.5 3.5 30 5 50 31.4 L Right-angle Connectors XS3F-M322-3@@-A Vibration-proof robot cable XS3F-M322-3@@-R Standard cable 50 L 4 dia. 23.1 30 5 20.5 Wiring Diagram 9 dia. 1 Pin No. 4 Cable lead colors 3.5 3 1.75 M8 x 1.0 1 Brown 3 4 Blue Black M8 Screw-on Connectors (4-core) Straight Connectors XS3F-M421-4@@-A Vibration-proof robot cable XS3F-M421-4@@-R Standard cable 2.15 M8 x 1.0 4 dia. 12.9 4 2 3 1 9 dia. 1.95 0.5 21.5 3.4 30 5 50 31.4 L Right-angle Connectors XS3F-M422-4@@-A Vibration-proof robot cable XS3F-M422-4@@-R Standard cable 50 L 23.1 20.5 30 4 dia. 9 dia. 2 Wiring Diagram 1 Pin No. 3.4 4 2.15 M8 x 1.0 5 3 0.5 1.95 1 2 3 4 Cable lead colors Brown White Blue Black 11 XS3 M8 SUS316L Lock (4-core) Straight Connectors XS3F-E421-402-A XS3F-E421-405-A 2.15 M8 x 1.0 12.9 4 2 3 1 4 dia. 9 dia. 1.95 0.5 21.5 3.4 30 5 50 31.4 L Right-angle Connectors XS3F-E422-402-A XS3F-E422-405-A 50 L 23.1 30 20.5 5 4 dia. 9 dia. 1 2 Wiring Diagram 3.4 Pin No. 4 Cable lead colors 3 2.15 0.5 1.95 M8 x 1.0 1 2 3 4 Brown White Blue Black M8 Screw-on Connectors (4-core) Straight Connectors Oil-resistant polyurethane robot cable XS3F-M421-4@@-PR PUR cable XS3F-M421-4@@-L L 31.4 4.7 dia. 4 2 3 1 9 dia. M8 x 1 5 50 Right-angle Connectors Oil-resistant polyurethane robot cable XS3F-M422-4@@-PR PUR cable XS3F-M422-4@@-L L 24.9 4.7 dia. 20.5 5 Molded part (black) 50 9 dia. M8 x 1 2 1 3.4 2.15 4 3 0.5 Wiring Diagram Pin No. 1 2 3 4 Cable lead colors Brown White Blue Black 1.95 12 XS3 M8 Screw-on Connectors (5-core) Oil-resistant Standard Cable Straight Connectors XS3F-M521-5@@-A 1.95 M8 x 1.0 4.7 dia. 2 1.45 4 1.35 1 3 5 9 dia. 0.35 21.5 3.4 30 5 50 L 31.4 L 4.7 dia. 24.9 Right-angle Connectors XS3F-M522-5@@-A 20.5 5 30 50 9 dia. M8 x 1.0 0.35 2 Wiring Diagram 1 Pin No. 5 Cable lead colors 3.4 1.95 4 3 2 1.35 1.45 4 Brown White Blue Black Gray 1 3 5 S8 4 pin Snap-in Connectors with Vibration-proof Robot Cable Straight Connectors XS3F-S421-4@@-R 2.15 4 dia. 13.9 4 2 3 1 8.2 dia. 1.95 0.5 21.1 3.4 30 5 50 30.7 L Right-angle Connectors XS3F-S422-4@@-R 50 L 23.1 30 5 19.8 4 dia. 8.2 dia. 2 Wiring Diagram 1 Pin No. 3.4 4 2.15 3 0.5 1.95 1 2 3 4 Cable lead colors Brown White Blue Black 13 XS3 XS3H Plugs on One Cable End Model Number Legend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS3H-@@2@-@@@-@ 1 2 3 1. Fastening Method 4 5 6 3. Cable Connection Direction 2. Connector Poles 4. Connections Pin No. 3: Brown Blue Black Pin No. 4: Brown White Blue Black 3: 3 poles 4: 4 poles 5. Cable Length C3: 0.3 m 01: 1 m 02: 2 m 05: 5 m 1: Straight 2: Right-angle M: M8 S: S8 6. Cable Specifications R: Vibration-proof robot cable PR: Oil-resistant polyurethane robot cable Ordering Information M8 Screw-on Connectors Cable specifications No. of cable cores Cable connection direction 3 Straight Vibration-proof robot cable Straight 4 Right-angle Straight Oil-resistant polyurethane robot cable 4 Right-angle Cable length L (m) Model 0.3 XS3H-M321-3C3-R 1 XS3H-M321-301-R 0.3 XS3H-M421-4C3-R 1 XS3H-M421-401-R 0.3 XS3H-M422-4C3-R 1 XS3H-M422-401-R 2 XS3H-M421-402-PR 5 XS3H-M421-405-PR 1 XS3H-M422-401-PR 2 XS3H-M422-402-PR 5 XS3H-M422-405-PR Note: Ask your OMRON representative about other cable lengths. S8 Snap-in Connectors Cable specifications No. of cable cores Cable connection direction Straight Vibration-proof robot cable 4 Right-angle Cable length L (m) 0.3 Model XS3H-S421-4C3-R 1 XS3H-S421-401-R 0.3 XS3H-S422-4C3-R 1 XS3H-S422-401-R Mating Connectors Model Mating Connectors XS3H (M8) XS3F (M8), XS3W (M8), XS3P (M8) XS3H (S8) XS3F (S8), XS3W (S8), XS3P (S8) Note: M8 screw models and S8 snap-in models cannot be connected to each other. 14 XS3 Dimensions (Unit: mm) M8 3 pin Screw-on Connectors with Vibration-proof Robot Cable Straight Connectors XS3H-M321-3@@-R M8 x 1.0 4 dia. 4 3 1 10 dia. 1.75 21.5 3.5 30 5 50 32 L Wiring Diagram Pin No. Cable lead colors 1 Brown 3 4 Blue Black M8 4 pin Screw-on Connectors with Vibration-proof Robot Cable Straight Connectors XS3H-M421-4@@-R Four, 1 dia. 2.15 M8 x 1.0 2 4 1 3 4 dia. 12.9 10 dia. 1.95 0.5 21.5 3.4 30 5 50 32 L 50 L Right-angle Connectors XS3H-M422-4@@-R 23.1 30 20.1 5 4 dia. M8 x 1.0 10 dia. Wiring Diagram Four, 1 dia. 4 3 2 1 Pin No. 3.4 2.15 0.5 1.95 1 2 3 4 Cable lead colors Brown White Blue Black 15 XS3 M8 4 pin Screw-on Connectors with Oil-resistant Polyurethane Robot Cable Straight Connectors XS3H-M421-4@@-PR 2.15 Four, 1 dia. 2 1.95 4.7 dia. 4 3 10 dia. 1 0.5 M8 x 1.0 3.4 5 32 L Right-angle Connectors XS3H-M422-4@@-PR 50 L 24.9 4.7 dia. 21.1 5 Molded part (black) 50 M8 x 1 10 dia. Four, 1 dia. 4 Wiring Diagram 3 Pin No. 3.4 2.15 2 1 Cable lead colors 1 2 3 4 0.5 1.95 Brown White Blue Black S8 4 pin Snap-in Connectors with Vibration-proof Robot Cable Straight Connectors XS3H-S421-4@@-R Four, 1 dia. 2.15 4 dia. 13.9 2 4 1 3 8.2 dia. 1.95 0.5 21.1 3.4 30 5 50 30.7 L 50 L Right-angle Connectors XS3H-S422-4@@-R 23.1 30 5 19.8 4 dia. 8.2 dia. Wiring Diagram Four, 1 dia. 4 3 Pin No. 3.4 2.15 2 1 0.5 1.95 1 2 3 4 Cable lead colors Brown White Blue Black 16 XS3 XS3P Panel-mounting Sockets for Terminal Boxes Ordering Information Connection method Panel mounting Front lock or rear lock M8 screw-on Rear lock S8 snap-in Front lock or rear lock Pin shape DIP pins Solder cup pins Solder cup pins DIP pins Solder cup pins Applicable wires -- AWG24 max. AWG24 max. -- AWG24 max. Model XS3P-M421-1 XS3P-M421-2 XS3P-M422-2 XS3P-S421-1 XS3P-S421-2 Note: Orders are accepted in multiples of the minimum order. Mating Connectors Model XS3P (M8) XS3P (S8) Mating Connectors XS3H (M8), XS3W (M8) XS3H (S8), XS3W (S8) Note: M8 screw models and S8 snap-in models cannot be connected to each other. Dimensions (Unit: mm) M8 Screw-on Connectors XS3P-M421-1 (DIP Pins) Front lock or rear lock 1.8 Four, 1 dia. 1.95 XS3P-M421-2 (Solder Cup Pins) Front lock or rear lock 16 7.2 2.15 24.9 12.5 7.2 1.8 16 2.15 2.15 0.5 0.5 18 dia. 3.4 M12 x 1.0 2.5 9.4 M12 x 1.0 1.5 M12 x 1.0 nut 3.4 M8 x 1.0 1.95 1.95 24.3 12.5 7.2 2.15 1.2 dia. 0.5 0.5 Solder cup hole 0.8 dia. x 2.5 18 dia. 3.4 9.4 9.7 Rubber bushing 7.2 M12 x 1.0 M12 x 1.0 nut M12 x 1.0 1.5 2.5 Rubber bushing 3.4 1.95 M8 x 1.0 9.7 XS3P-M422-2 (Solder Cup Pins), Rear Lock Slim Models 10 7 13.2 2 (0.3) 2.15 6 1.95 11.5 dia. M8 x 0.5 M8 x 0.5 nut 2 M8 x 1.0 Rubber bushing 3.4 10 17 XS3 S8 Snap-in Connectors XS3P-S421-1 (DIP Pins) Front lock or rear lock Four, 1 dia. XS3P-S421-2 (Solder Cup Pins) Front lock or rear lock 1.8 16 7.2 2.15 1.95 24.9 12.5 7.2 1.8 16 2.15 0.5 0.5 18 dia. M12 x 1.0 2.5 3.4 9.4 M12 x 1.0 nut M12 x 1.0 1.5 1.95 1.95 Rubber bushing 2.15 24.3 12.5 7.2 2.15 1.2 dia. 0.5 0.5 Solder cap hole 0.8 dia. x 2.5 18 dia. 3.4 3.4 7.2 9.5 9.4 M12 x 1.0 2.5 M12 x 1.0 nut M12 x 1.0 1.5 Rubber bushing 3.4 9.5 Mounting Dimensions for XS3P Screw-on Models and Snap-in Models Panel Cutout XS3P-@421-@ PCB-mounting Dimensions XS3P-M422-2 +0.2 0 9.8 24 min. Land 2.15 +0.2 8.2 0 +0.2 0 dia. 12 Panel-mounting Dimensions Rear lock 1.95 (Unit: mm) Front Lock Panel Panel 0.5 1.95 Four, 1.2 dia. 24 min. 3.4 +0.2 0 7.2 Note: The panel thickness is 1 to 3 mm. Note: The panel thickness is 2.4 mm maximum. Nut Rubber bushing Rubber bushing Nut Safety Precautions Refer to Safety Precautions on page 24. Precautions for Correct Use Panel-Mounting When mounting XS3P Panel-mounting Connectors to panels, refer to Panel-mounting Dimensions and provide rubber bushings and nuts for the Connectors. Apply a tightening torque of between 0.4 and 0.6 N*m to mount the Connectors. 18 XS3 XS3M Sensor-Embedded Plugs Ordering Information Mounting method Pin shape DIP pins Solder cup pins Embedded model Applicable wires -- AWG26 max. Model XS3M-K421-1 XS3M-K421-2 Mating Connectors Model XS3M Mating Connectors XS3F (M8/S8), XS3W (M8/S8) Note: The plug can be connected to both M8 screw and S8 snap-in models. Dimensions (Unit: mm) Embedded Plug with Screw Threads DIP Pins XS3M-K421-1 M8 x 1.0 1 dia. Four, 1 dia. 4 2 2 4 5.8 dia. 6.5 dia. 6.9 dia. 6.5 dia. 5.80.2 dia. 3 Mounting 2.15 Four, 1 dia. 0.4 1 5.8 1 5.6 dia. 2 Resin filled 3.4 3 3 6.75 3.6 3 +0.05 dia. 0 0.5 1.95 7.2 (min) 10.3 Solder Cup Pins XS3M-K421-2 Four, 1 dia. 4 M8 x 1.0 1 dia. 2 2 6.5 dia. 5.80.2 dia. 3 2.15 0.4 Mounting Four, 1 dia. 4 5.8 dia. 6.5 dia. 6.9 dia. 1 5.8 1 5.6 dia. Solder cup hole 0.7 dia. x 1.7 1.7 3 2 3 3 6.75 3.4 +0.05 dia. 0 0.5 1.95 Resin filled 5.2 (min) 10.3 19 XS3 XS3M Panel-mounting Plugs Ordering Information Mounting method Front Lock Pin shape Shield pin DIP pins 4.5 mm (for either round holes or solder cups) Yes No Applicable wires Model XS3M-M524-10 AWG26 max. XS3M-M524-11 Mating Connectors Model Mating Connectors XS3M-M524-1@ XS3F-M52@-5@@-A Dimensions (Unit: mm) Front lock (5 pins) DIP Pins 4.5 mm (for Either Round Holes or Solder Cups), Without Shield Pin XS3M-M524-10 Panel Cutout 8.2 mm +0.1 dia. 0 PCB-mounting Dimensions 3.4 1.95 +0.1 7.1 0 Five, 1.7 dia. lands Five, 1.2 dia. O-ring on panel side* 2-1.45 2 1.35 1 3.4 M8 x 1.0 1.35 3.4 12 1.95 11.9 dia. 1.45 1.45 5-1 dia. 0.35 *The O-ring on the panel side maintains a waterproof structure (IP67) between the panel and Connector. 1.35 0.35 SW7 6 min. SW10 7.05 Pin Numbers Note: The panel thickness is 2.4 mm maximum. O-ring on panel side* 1.95 3 5 2-0.35 Note: The panel thickness is 0.8 to 2 mm. 4 SW11 5-4.5 (2.5) Panel location (example for t = 2.0) DIP Pins 4.5 mm (for Either Round Holes or Solder Cups), With Shield Pin XS3M-M524-11 Panel Cutout PCB-mounting Dimensions 10.4 3.4 1.95 +0.1 0 +0.1 0 8.2 mm dia. Two, 1.2 lands 2-0.7 4-R0.6 4-R0.35 Five, 1.7 dia. lands 7.1 Five, 1.2 dia. 2-1.45 2 4 Two, 3.8 lands 1 1.35 O-ring on panel side* Two, 3.3 lands 2-0.35 Note: The panel thickness is 2.4 mm maximum. Note: The panel thickness is 0.8 to 2 mm. 3.4 1.95 M8 x 1.0 1.95 11.9 dia. 5-1 dia. 1.45 2-2.6 1.35 0.35 1.35 0.35 SW7 SW10 6 min. 7.05 Pin Numbers 10.4 3.4 O-ring on panel side* 5-4.5 12 1.45 3 5 2-4.5 SW11 *The O-ring on the panel side maintains a waterproof structure (IP67) between the panel and Connector. (2.5) Panel location (example for t = 2.0) 20 XS3 Safety Precautions Refer to Safety Precautions on page 24. Precautions for Correct Use XS3M-M524-@@ Connection To mate the Connectors, align the mating marks on the Plug and Socket (see following figure), insert the Connectors completely, and tighten the lock nut, being careful not to damage the threads. XS3M-M524-@@ Panel Mounting After you mount the Connector to the panel, attach the nut and tighten it to a suitable torque (0.4 N*m). Plug Mating marks Socket 21 XS3 XS3R Y-Joint Plug/Socket Connectors Ordering Information Mating Connectors For M8 Connectors Cable Model Connector Connectors on both cable ends With cable Connector on one cable end Without cable Cable length L (m) 0.5 1 2 3 2 5 Connectors on both cable ends Mating Connectors XS3F (M8) XS3H (M8) XS3W (M8) XS3P (M8) Model XS3R (M8) XS3R-M426-1C51-A XS3R-M426-1011-A XS3R-M426-1021-A XS3R-M426-1031-A XS3R-M426-1020-A XS3R-M426-1050-A XS3R-M426-1 XS3R-M426-5 --- Dimensions (Unit: mm) M8 Screw-on Connectors Connectors on Both Cable Ends (Y-Joint Plug/Socket) XS3R-M426-1@@1-A 4 3 9 dia. . dia Plug 4 dia. 10 dia. 3 1 12.5 4 5.6 dia. 23 9 dia. 4 2 16.4 Socket CN2 3.5 1 M8 x 1.0 2 10.5 1 2 CN1 3 1 4 2 CN0 32 M8 x 1.0 L Connector on One Cable End (Y-Joint Plug/Socket) XS3R-M426-1@@0-A 3 1 12.5 4 3 . 9 dia. 9 dia. dia 4 4 dia. 5.6 dia. 4 2 16.4 Socket CN2 3.5 1 M8 x 1.0 2 10.5 1 23 2 CN1 30 5 50 L Connector on Both Ends (Y-Joint Plug/Socket) without Cable XS3R-M426-@ 9 dia. 23 16.4 4 dia . Socket CN2 3.5 1 M8 x 1.0 Plug 3 1 12.5 4 2 3 2 3 4 10 dia. CN0 9 dia. 4 1 2 10.5 CN1 1 2 M8 x 1.0 37.2 Wiring Diagram XS3R-M426-1@@1-A CN2 CN1 1 2 3 4 1 2 3 4 XS3R-M426-1@@0-A CN2 4 3 2 1 1 2 3 4 CN0 CN1 1 2 3 4 XS3R-M426-1 CN2 Black Blue White Brown Lead color CN1 1 2 3 4 1 2 3 4 XS3R-M426-5 CN2 4 3 2 1 1 2 3 4 CN0 CN1 1 2 3 4 4 3 2 1 CN0 22 XS3 XS3 M8/S8 Connector Cover Dust Covers XS3Z-13 XS3Z-13 M8 Plug XS3Z-15 XS3Z-15 M8 Socket S8 Socket S8 Plug Model XS3Z-13 XS3Z-15 Material PVC resin/red The Dust Cover is for dust prevention and does not ensure IP67 degree of protection. When mounting the Dust Cover to a Connector, be sure to press the Dust Cover onto the Connector until the Connector is fully inserted into the Dust Cover. Suitable connector Model Mounting portion XS3H/XS3W/XS3R M8 plug XS3F/XS3W S8 socket XS3H/XS3W S8 plug XS3M M8/S8 plug XS3F/XS3W/XS3R M8 socket 23 XS3 Safety Precautions Precautions for Correct Use Do not use the product in atmospheres or environments that exceed product ratings. Connections The XS3 and XS2 Sensor I/O Connectors cannot be connected to each other. You cannot mate Connectors that have a different number of poles. When using Sensors with Connectors or Limit Switches, use the Sensor I/O Connectors specified in the catalog. Do not connect M8 screw-on models and S8 snap-in models together, otherwise the proper degree of protection of the Connectors will not be maintained. Connector Connection and Disconnection Before connecting or disconnecting Connectors, make sure that no power is being supplied to the Connectors. When connecting or disconnecting Connectors, be sure to hold the Connectors by hand. Do not disconnect the Connectors by pulling the cable. Do not touch the mating surface of the connectors with wet hands. If there is any water on the Connector or near the Connector, be sure to wipe off the water before connecting or disconnecting the Connector, otherwise the Connector may short-circuit internally or not ensure good insulation. Make sure that mating section of any Connector is free of metal dust or power. Do not use pliers to tighten mounting the thread bracket, otherwise the thread bracket may be damaged. Be sure to tighten each thread bracket by hand within a torque of 0.2 N*m. If the thread bracket is not tightened securely, the Connector may not maintain its proper degree of protection or the thread bracket may fall off due to vibration. When you tighten or loosen a thread bracket, hold onto only the thread bracket. If you hold onto the cover or cable, excessive rotational force will be applied to the Connector and may damage it. Fully insert S8 snap-in models until the Connectors are hidden by the metal casing of the opposite parts, otherwise the Connectors will not maintain their proper degree of protection or the thread brackets may become loose due to vibration. Degree of Protection Do not impose external force continuously on the joints of pin blocks and covers, otherwise the Connectors may not keep its proper degree of protection (i.e., IP67). Connectors are not fully watertight. Do not use them underwater. The Connectors are not oil-resistant. Do not use them where they would be subject to oil. If Connectors are used in places with vibration or shock, secure the mating section of each Connector, otherwise the Connectors may be disconnected or fail to maintain their proper degree of protection. Connectors are of resin mold construction. Do not impose excessive force on them. Storage Do not store Connectors for long periods of time in the following locations Locations subject to dust or high humidity Locations subject to ammonia gas or sulfide gas Setup Do not make any cable bends near the base of the Unit. Any bends made must have a minimum radius of 36 mm. 24 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron's sole obligation hereunder shall be, at Omron's election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron's analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer's application or use of the Product. At Buyer's request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user's programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron's test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron's Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron's representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2018.6 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2018 All Right Reserved.