MCH6202-TL-E - ON Semiconductor

MCH6102 / MCH6202

No.6480-1/5

Applications

•Relay drivers, lamp drivers, motor drivers, flash.

Features

•Adoption of MBIT processes.

•High current capacitance.

•Low collector-to-emitter saturation voltage.

•High-speed switching.

•Ultrasmall package facilitates miniaturization in end products (mounting height : 0.85mm).

•High allowable power dissipation.

Specifications ( ) : MCH6102

Absolute Maximum Ratings at Ta=25°C

Parameter Symbol Conditions Ratings Unit

Collector-to-Base Voltage VCBO (--30)40 V

Collector-to-Emitter Voltage VCEO (--)30 V

Emitter-to-Base Voltage VEBO (--)5 V

Collector Current IC(--)1.5 A

Collector Current (Pulse) ICP (--)3 A

Base Current IB(--)300 mA

Collector Dissipation PCMounted on a ceramic board (600mm2✕0.8mm) 1.0 W

Junction Temperature Tj 150 °C

Storage Temperature Tstg --55 to +150 °C

Electrical Characteristics at Ta=25°C

Ratings

Parameter Symbol Conditions min typ max Unit

Collector Cutoff Current ICBO VCB=(--)30V, IE=0A (--)0.1 µA

Emitter Cutoff Current IEBO VEB=(--)4V, IC=0A (--)0.1 µA

DC Current Gain hFE VCE=(--)2V, IC=(--)100mA 200 560

Gain-Bandwidth Product fTVCE=(--)10V, IC=(--)300mA (450)500 MHz

Output Capacitance Cob VCB=(--)10V, f=1MHz (9)8 pF

Marking: MCH6102: AB, MCH6202: CB Continued on next page.

SANYO Electric Co.,Ltd. Semiconductor Company

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

Ordering number : EN6480B

D2005EA MS IM TB-00001962 / D1004 TS IM TB-00000347 / 83100TS (KOTO) TA-2843

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft's

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

MCH6102 / MCH6202

PNP / NPN Epitaxial Planar Silicon Transistors

DC / DC Converter Applications

MCH6102 / MCH6202

No.6480-2/5

Continued from preceding page. Ratings

Parameter Symbol Conditions min typ max Unit

Collector-to-Emitter Saturation Voltage VCE(sat) IC=(--)750mA, IB=(--)15mA

(--250)150 (--375)225

Base-to-Emitter Saturation Voltage VBE(sat) IC=(--)750mA, IB=(--)15mA (--)0.85 (--)1.2 V

Collector-to-Base Breakdown Voltage V(BR)CBO IC=(--)10µA, IE=0A (--30)40 V

Collector-to-Emitter Breakdown Voltage V(BR)CEO IC=(--)1mA, RBE=∞(--)30 V

Emitter-to-Base Breakdown Voltage V(BR)EBO IE=(--)10µA, IC=0A (--)5 V

Turn-ON Time ton See specified Test Circuit. (37)35 ns

Storage Time tstg See specified Test Circuit. (115)205 ns

Fall T ime tfSee specified Test Circuit. (26)32 ns

Package Dimensions Switching Time Test Circuit

unit : mm

7022-007

0.250.25

0.07

2.1

1.6

2.0

0.65

0.3

0.85

0.15

123

654

546

Top View

Bottom View

1 : Collector

2 : Collector

3 : Base

4 : Emitter

5 : Collector

6 : Collector

SANYO : MCPH6

RL=16Ω

VCC=12VVBE= --5V

20IB1= --20IB2= IC=750mA

For PNP, the polarity is reversed.

50Ω

INPUT OUTPUT

100µF 470µF

PW=20µs

IB1

IB2

D.C.≤1%

--2.0

--1.6

--1.2

--0.8

--0.4

00 --200 --400 --600 --800 --1000

IC -- VCE

--4mA

--2mA

--6mA

--8mA

--10mA

--15mA

--20mA

--30mA

--40mA

--50mA

IB=0mA

MCH6102

IT01872

--1.4

--1.6

--1.2

--1.0

--0.8

--0.6

--0.4

--0.2

00 --0.2 --0.4 --0.6 --0.8 --1.0

IC -- VBE

IT01874

Ta=75°C

25°C

--25°C

MCH6102

VCE= --2V

1.4

1.6

1.2

1.0

0.8

0.6

0.4

0.2

00 0.2 0.4 0.6 0.8 1.0

Ta=75°C

25°C

--25°C

MCH6202

VCE=2V

0.8

1.2

1.6

2.0

0.4

00 200 400 600 800 1000

IC -- VCE

2mA

4mA

8mA

6mA

10mA

15mA

20mA

30mA

50mA

40mA

IB=0mA

IT01873

IC -- VBE

IT01875

MCH6202

Collector Current, IC -- A

Base-to-Emitter Voltage, VBE -- V

Collector-to-Emitter Voltage, VCE -- mV

Collector Current, IC -- A

Collector-to-Emitter Voltage, VCE -- mV

Collector Current, IC -- A

Base-to-Emitter Voltage, VBE -- V

MCH6102 / MCH6202

No.6480-3/5

1000

100

VCE(sat) -- IC

IT01881

VBE(sat) -- IC

10000

1000

100

IT01883

1000

100

VCE(sat) -- IC

IT01879

--1000

--100

--10

VCE(sat) -- IC

IT01878

--1000

--100

--10

VCE(sat) -- IC

IT01880

VBE(sat) -- IC

--10000

--1000

--100

IT01882

1000

100

--0.01 --0.1 32573257 32

--1.0

--0.01 --0.1 32573257 32

--1.0

--0.01 --0.1 32573257 32

--1.0

--0.01 --0.1 32573257 32

--1.0

hFE -- IC

IT01876

1000

100

0.01 325

0.1

7323257

1.0

0.01 325

0.1

7323257

1.0

0.01 325

0.1

7323257

1.0

0.01 325

0.1

7323257

1.0

hFE -- IC

IT01877

DC Current Gain, hFE

Collector Current, IC -- A

DC Current Gain, hFE

Collector Current, IC -- A

Ta=75°C

25°C

--25°C

MCH6102

VCE= --2V

Ta=75°C

25°C

--25°C

MCH6202

VCE=2V

Ta=75°C

25°C

--25

°C

MCH6202

IC / IB=20

Ta=75°C

25°C

--25°C

MCH6102

IC / IB=20

Ta=75°C

25°C

--25°C

MCH6102

IC / IB=50

Ta=75°C

25°C

--25

°C

MCH6202

IC / IB=50

25°C

75°C

MCH6202

IC / IB=50

Ta= --25°C

25°C

75°C

MCH6102

IC / IB=50

Collector Current, IC -- A

Collector-to-Emitter

Saturation Voltage, VCE(sat) -- mV

Collector Current, IC -- A

Collector-to-Emitter

Saturation Voltage, VCE(sat) -- mV

Collector Current, IC -- A

Base-to-Emitter

Saturation Voltage, VBE(sat) -- mV

Collector Current, IC -- A

Base-to-Emitter

Saturation Voltage, VBE(sat) -- mV

Collector Current, IC -- A

Collector-to-Emitter

Saturation Voltage, VCE(sat) -- mV

Collector Current, IC -- A

Collector-to-Emitter

Saturation Voltage, VCE(sat) -- mV

MCH6102 / MCH6202

No.6480-4/5

A S O

ICP=3A

IC=1.5A

100ms

DC operation

10ms

1ms

500µs

100µs

1.4

1.0

0.8

0.6

0.4

0.2

1.2

2006040 80 100 140120 160

PC -- Ta

MCH6102 / MCH6202

IT01889

1.0

0.1

0.01 1.00.1 2537 10

2537 100

2537

IT01888

fT -- IC

100

1000

IT01887

MCH6202

VCE=10V

fT -- IC

100

1000

--0.01 25732573

--0.1 --1.0 0.01 0.1

25732573

1.0

IT01886

MCH6102

VCE= --10V

Cob -- VCB

100

--1.0

23 57 23 5 23 57

--0.1 --10 IT01884

MCH6102

f=1MHz

100

0.1 1.0

23 57 23 57

10 23 5

IT01885

MCH6202

f=1MHz

Cob -- VCB

Collector-to-Emitter Voltage, VCE -- V

Collector Current, IC -- A

Ambient Temperature, Ta -- °C

Collector Dissipation, PC -- W

MCH6102 / MCH6202

Ta=25°C

Single pulse

For PNP, minus sign is omitted.

Mounted on a ceramic board (600mm

✕0.8mm)

Mounted on a ceramic board (600mm

✕0.8mm)

Collector-to-Base Voltage, VCB -- V

Output Capacitance, Cob -- pF

Collector-to-Base Voltage, VCB -- V

Output Capacitance, Cob -- pF

Collector Current, IC -- A

Gain-Bandwidth Product, fT -- MHz

Collector Current, IC -- A

Gain-Bandwidth Product, fT -- MHz

MCH6102 / MCH6202

No.6480-5/5

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer’s

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer’s products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or

contained herein are controlled under any of applicable local export control laws and regulations,

such products must not be exported without obtaining the export license from the authorities

concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of December, 2005. Specifications and information herein are subject

to change without notice.