Technical Data 1157 Effective March 2018 Supersedes March 2017 BUSSMANN SERIES Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuseTM), midget and IEC 10x38mm DIN-Rail fused disconnect switches 2011/65/EU Contents Description Page Description Page 1-, 2- and 3-pole -- Class CC, Midget, 10x38mm Auxiliary contacts Description and specifications. . . . . . . . . . . . . . . 2-3 Description and specifications. . . . . . . . . . . . . . . . . 8 Available fuses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Recommended lockout devices. . . . . . . . . . . . . . . . 3 PLC fuse monitor Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Description and specifications. . . . . . . . . . . . . . . . . 9 Motor sizing table. . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Wiring schematic. . . . . . . . . . . . . . . . . . . . . . . . . . . 10 1-, 2- and 3-pole -- Class CF Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Description and specifications. . . . . . . . . . . . . . . 5-6 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Available fuses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Recommended lockout devices. . . . . . . . . . . . . . . . 6 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Motor sizing tables . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Technical Data 1157 Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches Effective March 2018 1-, 2- and 3-pole -- Class CC, midget, 10x38mm * Description: Flammability rating * * * Volts 35mm DIN-Rail Local open fuse indication minimum voltage** * 600 Vac (Class CC) * 240 Vac (midget UL(R)) * 90 Vac for AC versions * 400 Vac (midget International Electrotechnical Commission (IEC) * 12Vdc for DC versions * 80Vdc (DC Class CC/UL, DC midget/IEC) Amps ** Open fuse indication requires an open fuse to be in the CCP and the switch in the ON position. Accessories * 30A (UL) * Auxiliary contacts * 32A (IEC) * PLC wired remote fuse indication SCCR * 200 kA (Class CC) * 10 kA (midget UL) * 120 kA (midget IEC max) * 20 kA (DC Class CC/UL) * 10 kA (DC midget/IEC) Shipping weight * 1-Pole DC CCP Poles * 4mm shank lock or Brady pin-out device part number 90850 Mounting Ratings * UL 94V0 Lockout/tagout provisions Specifications: * -20C to 75C* * For fuse performance under or above 25C, consult fuse performance derating charts in the Bussmann Division publication titled Selecting Protective Devices (SPD), data sheet No. 3002. The revolutionary Bussmann series Compact Circuit Protector (CCP) fused disconnect switch is 2/3 the footprint of a traditional fusible switch and can provide up to a high 200 kA SCCR that can help improve assembly SCCR. * Storage and operating temperature 1-, 2- and 3-pole versions Agency information 2.84 lbs (1.29 kg) per carton Carton quantity * 12 poles Features: * Extremely compact design at 17.5mm wide per pole * High Short-Circuit Current Ratings (SCCR) up to 200 kA (UL) and 120 kA (IEC) * CE * Disconnect rated to provide means for load isolation * RoHS compliant * Full voltage rated up to 600 Vac or 80Vdc * For Class CC fuse versions * UL 98 Listed, File E302370, Guide WHTY * Class CC version is UL 98 Listed and horsepower rated, and suitable for branch circuit disconnect and branch circuit protection * IEC 10x38 version complies with IEC 60947-3 and suitable for branch circuit disconnect and branch circuit protection * Suitable for global installations, the units comply with UL, cULus, and IEC standards accepting UL Class CC, midget or IEC aM and gG/gL fuses * Open fuse indication: * * cULus to CSA Standard 22.2 No. 4-04, File 302370, Guide WHTY7 For UL midget and 10X38 IEC fuse versions * UL 508 Listed, File E320230, Guide NRNT * cULus Certified 22.2 No. 14-05 * IEC 60947-3 AC23A * IEC 60947-3 DC23A Conductors 75C Cu or higher * Single/dual 18-6AWG solid or stranded * Single 4AWG solid or stranded Terminals * Single/dual conductor box lug or fork terminal suitable for line, load or accessory connection Torque * 18-10AWG 20 Lb-In * 8-4AWG 35 Lb-In 2 Eaton.com/bussmannseries * Local fuse indication lights are standard * Optional wired remote open fuse indication can be utilized to signal a PLC and open a contactor to de-energize all phases, if required * IP20 finger-safe with 10AWG (6mm2) or larger wire * Built-in switch interlock prohibits removing the fuse under load * Padlockable handle for lockout/tagout procedures recommend using Brady pin-out device part number 90850 Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches Technical Data 1157 Effective March 2018 Catalog numbers: Amp rating Max horsepower rating ( Vac) No. of poles Volts SCCR Catalog no. Agency information 30 CC 1 600 Vac 200 kA 0.5 -- -- -- CCP-1-30CC UL 98 Listed, cULus 22.2, No. 4-04 30 CC 2 600 Vac 200 kA -- 2 -- -- CCP-2-30CC UL 98 Listed, cULus 22.2, No. 4-04 30 CC 3 600 Vac 200 kA -- 3 5 7.5 CCP-3-30CC UL 98 Listed, cULus 22.2, No. 4-04 -- -- -- Single/Dual -- 18-6AWG Sol/Str CCP-1-30M -- -- -- -- -- -- -- -- Fuse class 30 UL Midget 32** 10x38 IEC 1 400 Vac 30 CC 30 UL Midget 32** 10x38 IEC 120 kA 240 Vac 10 kA 400 Vac 120 kA 2 30 UL Midget 32** 10x38 IEC 240 480 600 240 Vac 10 kA 30 UL Midget 32** 10x38 IEC 120 Wire size/ (torque*) Single 4AWG Sol/Str Wire type UL 508 Listed, cULus 22.2, No. 14-05 75C Cu or higher UL 508 Listed, cULus 22.2, No. 14-05 CCP-2-30M 240 Vac 10 kA 3 400 Vac 120 kA 1 80Vdc 20 kA -- -- -- -- CCP-1-DCC 1 80Vdc 10 kA -- -- -- -- CCP-1-DCM Spade Terminal IEC 60947-3, AC-23A IEC 60947-3, AC-23A UL 508 Listed, cULus 22.2, No. 14-05 CCP-3-30M IEC 60947-3, AC-23A UL 98 Listed, CSA 22.2, No. 4-04 UL 508 Listed, cULus 22.2, No. 14-05 IEC 60947-3, DC-23A * 18-10AWG; 20 Lb-In, 8-4AWG; 35 Lb-In. ** 32A Class aM, 25A Class gG. SCCR May be lower, refer to installed fuse data sheets. Fork terminal with a 4.3mm gap for a #8-32 stud, 30A max, insulated flange, wire size 12-10AWG. Available Bussmann series fuses: Fuse class Type/description Volts Data sheet no. CC LP-CC time-delay, current limiting 600 Vac/300Vdc 1023 CC FNQ-R time-delay 600 Vac/300Vdc 1014 CC KTK-R fast-acting 600 Vac 1015 M FNM time-delay 250 Vac 2028 M FNQ time-delay 500 Vac 1012 M KTK fast-acting 600 Vac 1011 M BAF fast-acting 250 Vac 2011 M KLM fast-acting 600 Vac/dc 2020 gG/gL C10G 500V (400V@32A) 720115 aM 500V (400V@20@25A) 720115 C10M Open fuse indicating light Fuse access door Circuit marking area Fork terminal Box lug terminal Recommended lockout device: CCP version Class CC, midget, IEC 10x38 Switch handle (ganged on 2- and 3-pole versions) Lockout/ tagout provision Brady pin-out device P/N 90850 Dimensions - mm (in) Class CC, UL midget and I0x38 IEC 45 (1.8) 35 (1.4) 49.2 (1.9) 79.8 (3.1) 17.5 (0.7) 52.5 (2.1) 92.7 (3.7) Eaton.com/bussmannseries 3 Technical Data 1157 Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches Effective March 2018 Motor sizing table: LP-CC time-delay Class CC fuses Voltage 115 Vac, 1-phase 230 Vac, 1-phase 200 Vac, 3-phase 208 Vac, 3-phase 230 Vac, 3-phase 460 Vac, 3-phase 575 Vac, 3-phase Motor size (Hp) 0.167 0.25 0.33 0.50 0.17 0.25 0.33 0.50 0.75 1 1.5 0.50 0.75 1 1.5 2 0.50 0.75 1 1.5 2 0.50 0.75 1 1.5 2 3 0.50 0.75 1 1.5 2 3.00 5.00 0.50 0.75 1 1.5 2 3.00 5.00 7.50 Motor FLA (amps) 4.4 5.8 7.2 9.8 2.2 2.9 3.6 4.9 6.9 8 10 2.5 3.7 4.8 6.9 7.8 2.4 3.5 4.6 6.6 7.5 2.2 3.2 4.2 6 6.8 9.6 1.1 1.6 2.1 3 3.4 4.8 7.6 0.9 1.3 1.7 2.4 2.7 3.9 6.1 9 Min (amps) 9 12 15 30 4.5 6 7 10 15 25 30 5 7.5 10 15 25 5 7 10 15 15 4.5 7 9 12 15 30 2.25 3.2 4.5 6 7 10 25 1.8 2.8 3.5 5 5.6 8 15 30 Code max (amps) 15 20 25 30 10 10 15 15 25 25 30 10 15 15 25 25 10 15 15 20 25 10 10 15 20 25 30 6 6 10 10 15 15 25 3 6 6 10 10 15 20 30 Heavy start (amps) 15 20 25 30 10 10 15 15 25 30 30 10 15 15 25 30 10 15 15 25 30 10 12 15 20 25 30 6 6.25 10 12 15 15 30 3.5 6 6.25 10 10 15 20 30 Note: NEMA motors only (no IEC or design B energy efficient). Minimum size if no more than 1 start/hour. Code max if low to moderate reverse/jog/plug applications. Heavy start permitted only if code max does not allow motor start-up. For high reverse/jog/plug applications or larger horsepower motors, Bussmann series Class CF (Class J electrical performance) fuses are recommended. See CCP_CF with CUBEFuseTM. 4 Eaton.com/bussmannseries Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches 1-, 2- and 3-Pole -- Class CF The revolutionary Bussmann series Compact Circuit Protector (CCP) fused disconnect switch with CUBEFuseTMis 2/3 the footprint of a traditional fusible switch and provides a high 200 kA SCCR that can help increase assembly SCCR. * 600 Vac * 125Vdc (up to 80A max) Amps 30, 60, 100A 35mm DIN-Rail * 90V Open fuse indication requires an open fuse to be in the CCP and the switch in the ON position. Accessories SCCR * 200 kA AC * 100 kA DC (up to 80A max) Poles 1-, 2-, 3-pole * Auxiliary contacts * PLC wired remote fuse indication * Bussmann series CUBEFuse fuse pullers (P/Ns: CFP-30, CFP-60, CFP-100) Shipping weight * Agency information * UL 98 Listed, File E302370, Guide WHTY * cULus to CSA Standard 22.2 No. 4-04, File 302370, Guide WHTY7 * CE * RoHS compliant Conductors 75C Cu or higher * 30 to 60A CCPs: - Single/dual 18-6AWG solid or stranded - Single 4AWG solid or stranded * 100A CCPs - Single 10-8AWG solid - Single 8-1AWG stranded - Dual 6AWG stranded Terminals * Single/dual conductor box lug or fork terminal suitable for line, load or accessory connection * Torque: 0-60A: 70-100A: - 18-10AWG 20 Lb-In 8-6AWG 35Lb-In 4AWG 35 Lb-In 18-10AWG single 25 Lb-In 8-1AWG single 40 Lb-In 6AWG dual 45 Lb-In * Uses finger-safe Class CF Bussmann series CUBEFuse with Class J performance * Bussmann series Low-PeakTM dual-element, time-delay* * Non-indicating 1-100A * * See data sheet No. 9000. **See data sheet No. 2147. Six (6) poles Features: * Uses Class CF finger-safe fast-acting and time-delay CUBEFuse with Class J electrical performance * Extremely compact design at 25.4mm (1 inch) wide per pole * Ampacity rejecting disconnects will not accept Bussmann series CUBEFuse amp ratings greater than switch rating * High Short-Circuit Current Ratings at 200 kA * Disconnect rated to provide means for load isolation * Full voltage rated at 600 Vac * 125Vdc rated up to 80A max * UL 98 Listed and suitable for branch circuit disconnect and branch circuit protection * 1-, 2- and 3-pole versions are horsepower rated * Complies with UL and CSA * Open fuse indication: * Local fuse indication lights are standard * Optional wired remote open fuse indication can be utilized to signal a PLC and open a contactor to de-energize all phases, if required * Additional open fuse indication can be provided by the Bussmann series CUBEFuse * IP20 finger-safe construction with 10AWG (6mm2) wire or larger * Built-in switch interlock capability prohibits removing the fuse under load * Padlockable handle for lockout/tagout procedures Indicating 6-100A Fast-acting, non-indicating 1-100A** 2.03 lbs (0.92kg) per carton Carton quantity Fuses * 4mm shank lock Local open fuse indication minimum voltage * * UL 94V0 Lockout/tagout provisions * Volts * Flammability rating Mounting Ratings * -20C to 75C*** *** For fuse performance under or above 25C, consult fuse performance derating charts in the Bussmann Division publication titled Selecting Protective Devices (SPD) No. 3002. * Specifications: Effective March 2018 Storage and operating temperature * Description: Technical Data 1157 Eaton.com/bussmannseries 5 Technical Data 1157 Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches Effective March 2018 Catalog numbers: UL Amp fuse rating class Max horsepower rating ( Vac)* No. of poles Volts 30 CF 1 30 CF 2 30 CF 3 60 CF 1 60 CF 2 60 CF 3 100 CF 1 100 CF 2 100 CF 3 SCCR 600 Vac 200 kA 125Vdc 100 kA 600 Vac 200 kA 125Vdc 100 kA 600 Vac 200 kA 600 Vac 200 kA 125Vdc 100 kA 600 Vac 200 kA 125Vdc 100 kA 600 Vac 200 kA 600 Vac 200 kA 240 480 600 1.5 -- -- -- -- 3 -- -- -- 5 15 10 3 -- -- -- Single 4AWG Sol/Str -- 7.5 -- -- Spade Terminal -- 7.5 20 15 5 -- -- -- -- 10 -- -- -- 20 50 40 125Vdc 100 kA 600 Vac 200 kA 125Vdc 100 kA 600 Vac 200 kA Wire size/ torque** 120 Wire type Single/Dual 18-6AWG Sol/Str 75C Cu or higher Single 8-10AWG Sol/Str 8-1AWG Str Dual 6AWG Str Spade Terminal Catalog number Agency information CCP-1-30CF UL 98 Listed, cULus 22.2, No. 4-04 CCP-2-30CF UL 98 Listed, cULus 22.2, No. 4-04 CCP-3-30CF UL 98 Listed, cULus 22.2, No. 4-04 CCP-1-60CF UL 98 Listed, cULus 22.2, No. 4-04 CCP-2-60CF UL 98 Listed, cULus 22.2, No. 4-04 CCP-3-60CF UL 98 Listed, cULus 22.2, No. 4-04 CCP-1-100CF UL 98 Listed, cULus 22.2, No. 4-04 CCP-2-100CF UL 98 Listed, cULus 22.2, No. 4-04 CCP-3-100CF UL 98 Listed, cULus 22.2, No. 4-04 * With time-delay Bussmann series Low-Peak CUBEFuse. ** 30-60A: 18-10AWG 20 Lb-In, 8-6AWG 35 Lb-In, 4AWG 35 Lb-In, 70-100A: 18-10AWG Single 25 Lb-In, 8-1AWG Single 35 Lb-In, 6AWG Dual 45 Lb-In Fork terminal with a 4.3mm gap for a #8-32 stud, 30A max, insulated flange, wire size 12-10AWG. Up to 40A max. Up to 80A max. Switch handle (ganged on 2- and 3-pole versions) Available Bussmann series fuses: Fuse class CF CF Type/description Low-Peak time-delay, current limiting 600 Vac/300Vdc Data sheet No. UPS/fast-acting 600 Vac/dc 2147 9000 Open fuse indicating light Circuit marking area Fuse holder Fork terminal Lockout/ tagout provision Box lug terminal Dimensions - mm (in) 100A CUBEFuse CCP 30 and 60A CUBEFuse CCP 113.9 (4.5) 75.7 (3.0) 25.15 (1.0) 67.7 (2.7) 91.2 (3.6) 56.6 (2.2) 9.1 (0.4) 100.0 (3.9) 60A CUBEFuse 89.1 (3.5) 30A CUBEFuse 83.3 (3.3) 49.2 (1.9) 60.3 (2.4) 75.1 (3.0) 25.1 (1.0) 50.4 (2.0) 7.6 (0.3) 147.1 (5.8) 6 Eaton.com/bussmannseries 50.5 (2.0) 79.5 (3.0) Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches Technical Data 1157 Effective March 2018 Motor sizing table: Bussmann series TCF Low-PeakTM time-delay Class CF fuses Voltage 115 Vac, 1-phase 230 Vac,1-phase 200 Vac, 3-phase 208 Vac, 3-phase Motor size (Hp) Motor FLA (amps) Optimal protection (amps) Code max (amps) Heavy start (amps) 10 0.5 2.2 6 6 6 15 15 0.75 3.2 6 6 6 15 15 15 1 4.2 10 10 10 15 Motor size (Hp) Motor FLA (amps) Optimal protection (amps) Code max (amps) Heavy start (amps) 0.167 4.4 10 10 0.25 5.8 10 0.333 7.2 Voltage 1.5 6 10 15 2 6.8 15 15 15 3 9.6 15 20 20 45 5 15.2 25 30 30 50 7.5 22 35 40 45 60 N/A 20** 54 90 100 N/A 90 100 N/A 2.2 6 6 6 2.9 6 6 6 0.333 3.6 6 10 10 0.5 4.9 10 10 10 0.75 6.9 15 15 15 1 8 15 15 17.5 1.5 10 15 20 20 2 12 20 25 25 3 17 25 30 35 0.5 9.8 15 20 20 0.75 13.8 25 25 30 1 16 25 30 35 1.5 20 30 35 2 24 40 45 3 34 50 5** 56 0.167 0.25 5 28 45 50 60 7.5 40 60 N/A N/A 10** 50 80 90 N/A 0.5 2.5 6 6 6 0.75 3.7 6 10 10 1 4.8 10 10 10 1.5 6.9 15 15 15 2 7.8 15 15 17.5 3 11 17.5 20 20 35 5 17.5 30 35 7.5 25.3 40 45 50 20** 62.1 100 N/A N/A 0.5 2.4 6 6 6 0.75 3.5 6 10 10 1 4.6 10 10 10 1.5 6.6 10 15 15 2 7.5 15 15 15 3 10.6 17.5 20 20 35 5 16.7 25 30 7.5 24.2 40 45 50 20** 59.4 90 N/A N/A 230 Vac, 3-phase 460 Vac, 3-phase 575 Vac, 3-phase 0.5 1.1 3 3 3 0.75 1.6 3 3 3 1 2.1 6 6 6 1.5 3 6 6 6 2 3.4 6 6 6 3 4.8 10 10 10 5 7.6 15 15 15 7.5 11 17.5 20 20 10 14 25 25 30 15 21 35 40 45 20 27 40 50 60 50** 65 100 N/A N/A 0.5 0.9 3 3 3 0.75 1.3 3 3 3 1 1.7 3 3 3 1.5 2.4 6 6 6 2 2.7 6 6 6 3 3.9 6 10 10 5 6.1 10 15 15 7.5 9 15 20 20 10 11 17.5 20 20 40** 41 70 80 80 Note: Use Code Max column for low to moderate reverse/jog/plug applications. *Heavy Start permitted only if Code Max does not allow motor start-up. Based on motor FLA from NEC(R) tables 430.248 and 430.250. Eaton.com/bussmannseries 7 Technical Data 1157 Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches Effective March 2018 Installed on a CCP-3-xx Auxiliary Contacts: Up to 60A CCP Description: 70 to 100A CCP NO+NC contact output to indicate the status of the switching mechanism on the CCP. Specifications: * Rated ampacity 5 A * Rated voltage 240 Vac * NC/NO contacts are closed/open when the CCP switch is in the "ON" position (closed) * Flammability rating UL 94V0 Agency information * UL 98 Recognized, File E155130, Guide WHTY2 * cULus to CSA, Standard 22.2 No. 4-04 * IEC 60947-5-1 Dimensions - mm (in) Wiring * 20-16AWG (0.5 to 1.5mm2) wire * Torque 5 Lb-In (0.68N*m) * For use with only 75C Cu wire Up to 60A CCP 1.8 Packaging * The CCP-AUX and CCP-AUX-100 are packaged individually * A single unit is capable of mounting to a 1-, 2-, or 3-pole CCP Installation technique 2.6 Mounts on the right side ONLY of the CCP, and mechanically interlocks with the CCP switch handle with hardware provided * IP20 rating -- yes STRIP 33 NO 34 NO 41 NC 42 NC 1.9 Environmental data Storage and operating temperature: -20C to 75C * .190 3.7 .3 Catalog numbers * 1-60 A, CCP-AUX * 70-100 A, CCP-AUX-100 70 to 100A CCP 1.8 Signal output Agency information Auxiliary Contacts 1 per CCP NO+NC for (1-, 2- or Switch Status 3-pole) up to 60A 5A/240 Vac UL 98 Recognized, cURus 22.2 No. 4-04, IEC 60947-51 AC-15 Auxiliary Contacts 1 per CCP NO+NC for (1-, 2- or Switch Status 3-pole) 70 to 100A 5A/240 Vac UL 98 Recognized, CSA C22.2 No. 4-04 Description Max per CCP Catalog no. CCP-AUX 2.9 33 NO STRIP 34 NO 2.2 CCP-AUX-100 42 NC 41 NC De-energize all circuits before installing or removing any CCP-AUX devices and follow all prescribed safety procedures. .190 3.7 8 Eaton.com/bussmannseries .3 Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches PLC fuse monitor: Description: Technical Data 1157 Effective March 2018 Installed on a CCP-3-xx Up to 60A CCP 70 to 100A CCP A resettable threephase fuse monitor that integrates with the I/O card in a Programmable Logic Controller (PLC). Specifications: * Signal output to PLC: * +24Vdc, 10mA max * Output signals: * Digital 0Vdc (low), 24Vdc max (high) * 0Vdc Low - fuse is good * 24Vdc High - fuse has opened When the fuse opens, the output signal is sent high and will remain high until the unit is reset. Storage and operating temperature -20C to 75C * PLC programming The CCP-PLC-IND signal line is designed to provide a digital input to a PLC I/O card. In this case, a Programmable Logic Control program must be written to properly interpret the input signal to the PLC. The PLC program should check for consecutive high signals before taking action on a critical process. * Agency information * UL 98 Recognized, File E155130, Guide WHTY2 * cULus to CSA, Standard 22.2 No. 4-04 Emissions and immunity testing * Electrostatic discharge, IEC 61000-4-2 * Electrical fast transient/burst, IEC 6100-4-4 * Surge immunity, IEC 61000-4-5 Rated impulse voltage * 8kV Local indication * Two distinct LEDs indicate unit power (green) and open fuse (red). Open fuse LED is resettable upon the replacement of the fuse and the actuation of the reset switch Flammability rating * UL 94V0 Wiring * For power, signal and ground connections use shielded twisted pair 22-24AWG (0.34-0.25mm2) 300V rated wire Catalog numbers * 1-60 A, CCP-PLC-IND * 70-100 A, CCP-PLC-100 Description Wired remote fuse indication for PLC applications up to 60A Wired remote fuse indication for PLC applications 70 to 100A Max per CCP Signal output to PLC Min. circuit Volts Agency information Catalog no. CCP-PLC-IND 1 per CCP (1, 2- or 3-pole) 24Vdc/ 10mA 100 Vac UL 98 Recognized, cURus 22.2 No. 4-04 CCP-PLC-100 De-energize all circuits before installing or removing any CCP-PLC-IND devices and follow all prescribed safety procedures. Packaging * The CCP-PLC-IND is packaged individually * A single unit monitors up to three phases. Package includes 0.110" (2.8mm) quick connects for power, signal and ground connections Minimum circuit voltage * Minimum circuit voltage required across the CCP is 100 Vac/dc for the remote indication device to operate Installation technique * Mounts on the left side ONLY of the CCP and mechanically interlocks with the CCP switch handle with hardware provided IP20 rating -- yes Eaton.com/bussmannseries 9 Technical Data 1157 Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches Effective March 2018 PLC wiring schematic: PLC power supply CCP-PLC-IND +24 Vdc +24 Vdc Connections for CCP-PLC-IND from a CCP-3-XX to a remote monitoring device Circuit monitoring leads from CCP-PLC-IND to CCP (100 Vac - 600 Vac) 0 Vdc/Gnd 0 Vdc/Gnd Signal 10 mA max. The CCP-PLC-IND needs to be powered by the same +24 Vdc and ground (0 Vdc/Gnd return) terminals that feed the PLC input card. If it is not, it may improperly signal. +24 Vdc 0 Vdc/Gnd PLC input card If feeding multiple CCP-PLC-INDs from different power supplies, there must be multiple input cards being powered by those same power supplies as well. Connection from CCP-PLC-IND to CCP Connect leads from CCP-PLC-IND to the terminals as shown. There is a dedicated terminal on the CCP to accept the spade connectors from the CCP-PLC-IND. NOTE: When monitoring a 1-or 2-pole CCP, trim unused leads. 10 Eaton.com/bussmannseries Circuit monitoring leads from PLC or remote monitoring device. Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches Technical Data 1157 Effective March 2018 Dimensions - mm (in) Up to 60A CCP SIG GND +24vDC +24vDC RESET 1.9 6T 5L 3 3 2.6 4T 3L 2 2 2T 1L 1 1 STATUS ON 1.8 .3 3.7 70 to 100A CCP 2 4T 2.2 3 6T 3 5L 2.9 3L 2 2T 1L 1 SIG GND +24vDC +24vDC RESET STATUS 1 ON 2.0 .3 3.7 Eaton.com/bussmannseries 11 Technical Data 1157 Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches Effective March 2018 The only controlled copy of this data sheet is the electronic read-only version located on the Eaton network drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com Bussmann Division 114 Old State Road Ellisville, MO 63021 United States Eaton.com/bussmannseries (c) 2018 Eaton All Rights Reserved Printed in USA Publication No. 1157 - BU-SB15192 March 2018 Eaton, Bussmann, CUBEFuse and Low-Peak are valuable trademarks of Eaton in the US and other countries. You are not permitted to use the Eaton trademarks without prior written consent of Eaton. CSA is a registered trademark of the Canadian Standards Group UL is a registered trademark of the Underwriters Laboratories, Inc. For Eaton's Bussmann series product information, call 1-855-287-7626 or visit: Eaton.com/bussmannseries Follow us on social media to get the latest product and support information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Eaton: 16371-2 16371-1 16371-3 16370-3 16372-1 16372-3 16372-2 16373-3 CCP-PLC-IND CCP-1-60CF CCP-1DCC CCP-2-60CF CCP-AUX CCP-2-100CF CCP-2-30M CCP-3-60CF CCP-3-30CC CCP-1-30CF CCP-2-30CC CCP-2-30CF CCP-1-30M CCP-3-30CF CCP-1-100CF CCP-3-30M CCP-1-30CC CCP-1-DCM 16373-2 16373-1 CCP2-1-DCM CCP2-1-DCC CCP-PLC-100 CCP-AUX-100