CAP-100 Series - Non-Contact, Capacitive Level Sensor LEVEL SWITCHES - SINGLE POINT For non-metallic containers Easy external mounting Compact - 30x45 mm (1.18 x 1.77) Potentiometer for sensitivity adjustment Power on and signal LED indicators The CAP-100 series offers a unique level sensing solution for a wide variety of bottle types including plastic, glass and fiberglass. The non-contact sensor is ideally suited for medical applications such as waste, reagent or diluent liquids as well as dark, sticky or viscous fluids. The easy-to-calibrate sensor is available in both aqueous and non-aqueous versions and can be delivered with factory preset sensitivity for quick installation for OEM orders. The CAP-100 may also be used as a proximity sensor to detect the presence of solids such as paper or pulp. Specifications Performance Nominal Sensing Distance, Sn Sensing Range Repeat Accuracy - (% of Sn) Hysteresis - (% of Sn) Mechanical Enclosure Ratings Operating Temperature Range LED Signal Indicator Power On LED Indicator Potentiometer Sensor Type Unshielded Shielded Sensor Material Cable Shock Vibration Electrical Supply Voltage Continuous Switching Current Voltage Drop Current Consumption Switching Frequency Transient Protection Overload Protection Short Circuit Reverse Polarity Protection Approvals Typical Applications 0.39 (10mm) 0-0.39 (0-10mm) <10% <20% Fluid Monitoring: * Waste * Reagents * Diluent IP67, NEMA 1,3,4,6,13 -13F to +158F (-25C to +70C) Yellow Green Yes Dimensions 0.5910 (15 mm) 0.2364 (6 mm) L-Type, Non-Embeddable D-Type, Embeddable Glass Filled Nylon 78.74 (2 meter), 3 Wire PVC 30g, 11ms 55Hz, 1mm amplitude in all planes LEDs Pot 1.1820 (30 mm) Normally Open A-42 Water Based, Conductive (unshielded sensor) 5/8 Non-Water Based, Not Conductive (shielded sensor) 3/8 Normally Closed 10-48VDC 10-48VDC BRN 300mA max LOAD BLK Select a Part Number based on Fluid Properties and Sink State. Wet/Dry Sink 0.7880 (20 mm) Wiring Diagram How To Order Max. Container Wall Thickness 0.1182 (3 mm) R0.1182 (R3 mm) 2.2458 (57 mm) 1.7730 (45 mm) 10-48 VDC 300 mA <2 VDC <10 mA 100 Hz 2kV, 1ms, 1 kOhm Yes Yes Yes CE Fluid Properties * Detergent/Wash * Coolant * Printing Ink Part Number N.O. Wet 230079 N.C. Dry 230081 N.O. Wet 228830 N.C. Dry 229855 Visit www.GemsSensors.com for most current information. BRN BLU 300mA max LOAD BLK BLU