A
P09N20BGP-HF
Advanced Power N-CHANNEL ENHANCEMENT MODE
Electronics Corp. POWER MOSFET
▼ Simple Drive Requirement BVDSS 200V
▼ Lower Gate Charge RDS(ON) 460mΩ
▼ Fast Switching Characteristics ID7.8A
▼ RoHS Compliant & Halogen-Free
Description
Absolute Maximum Ratings
Symbol Units
VDS Drain-Source Voltage V
VGS Gate-Source Voltage V
ID@TC=25℃Continuous Drain Current, VGS @ 10V A
ID@TC=100℃Continuous Drain Current, VGS @ 10V A
IDM Pulsed Drain Current1A
PD@TC=25℃Total Power Dissipation W
TSTG ℃
TJOperating Junction Temperature Range ℃
Thermal Data
Symbol Value Unit
Rthj-c Maximum Thermal Resistance, Junction-case 1.8 ℃/W
Rthj-a 62 ℃/W
Data & specifications subject to change without notice
-55 to 150
Parameter
+20
Storage Temperature Range
20
69
Halogen-Free Product
201005131
1
Maximum Thermal Resistance, Junction-ambient
Parameter Rating
200
7.8
5
-55 to 150
A
dvanced Power MOSFETs from APEC provide the
designer with the best combination of fast switching,
ruggedized device design, low on-resistance and cost-effectiveness.
The TO-220 package is widely preferred for commercial-industrial
through-hole applications.
G
D
S
GDSTO-220(P)
Electrical Characteristics@Tj=25oC(unless otherwise specified)
Symbol Parameter Test Conditions Min. Typ. Max. Units
BVDSS Drain-Source Breakdown Voltage VGS=0V, ID=250uA 200 - - V
VGS=10V, ID=5A - - 460 mΩ
VGS=4.5V, ID=3A - - 500 mΩ
VGS(th) Gate Threshold Voltage VDS=VGS, ID=250uA 1 - 3 V
gfs Forward Transconductance VDS=10V, ID=5A - 9 - S
IDSS Drain-Source Leakage Current VDS=160V, VGS=0V - - 25 uA
IGSS Gate-Source Leakage VGS= +20V, VDS=0V - - +100 nA
QgTotal Gate Charge2ID=5A - 21 33.6 nC
Qgs Gate-Source Charge VDS=160V - 2 - nC
Qgd Gate-Drain ("Miller") Charge VGS=4.5V - 14 - nC
td(on) Turn-on Delay Time2VDD=100V - 6 - ns
trRise Time ID=5A - 9 - ns
td(off) Turn-off Delay Time RG=3.3Ω-39 -ns
tfFall Time VGS=10V - 10 - ns
Ciss Input Capacitance VGS=0V - 630 1000 pF
Coss Output Capacitance VDS=25V - 90 - pF
Crss Reverse Transfer Capacitance f=1.0MHz - 45 - pF
Source-Drain Diode
Symbol Parameter Test Conditions Min. Typ. Max. Units
VSD Forward On Voltage2IS=5A, VGS=0V - - 1.3 V
trr Reverse Recovery Time2IS=5A, VGS=0V, - 190 - ns
Qrr Reverse Recovery Charge dI/dt=100A/µs - 1.7 - uC
Notes:
1.Pulse width limited by Max. junction temperature.
2.Pulse test
THIS PRODUCT IS SENSITIVE TO ELECTROSTATIC DISCHARGE, PLEASE HANDLE WITH CAUTION.
USE OF THIS PRODUCT AS A CRITICAL COMPONENT IN LIFE SUPPORT OR OTHER SIMILAR SYSTEMS IS NOT AUTHORIZED.
APEC DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED
HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
APEC RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN.
2
AP09N20BGP-HF
RDS(ON) Static Drain-Source On-Resistance2
AP09N20BGP-H
F
Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics
Fig 3. Normalized BVDSS v.s. Junction Fig 4. Normalized On-Resistance
Temperature v.s. Junction Temperature
Fi
g
5. Forward Characteristic o
f
Fig 6. Gate Threshold Voltage v.s.
Reverse Diode Junction Temperature
3
0.6
0.8
1
1.2
1.4
1.6
-50 0 50 100 150
Tj , Junction Temperature ( oC)
Normalized BVDSS (V)
0
0.4
0.8
1.2
1.6
2
2.4
2.8
-50 0 50 100 150
Tj , Junction Temperature ( oC )
Normalized RDS(ON)
I
D=5A
VGS =10V
0
4
8
12
16
0 8 16 24 32
VDS , Drain-to-Source Voltage (V)
ID , Drain Current (A)
TC=150oC10V
7.0V
6.0V
5.0V
VGS =4.5V
0
2
4
6
8
0 0.2 0.4 0.6 0.8 1 1.2 1.4
VSD , Source-to-Drain Voltage (V)
IS(A)
Tj=25oCTj=150oC
0.4
0.6
0.8
1
1.2
1.4
-50 0 50 100 150
Tj , Junction Temperature ( o C )
Normalized VGS(th) (V)
0
4
8
12
16
20
0 8 16 24 32
VDS , Drain-to-Source Voltage (V)
ID , Drain Current (A)
TC=25oC10V
7.0V
6.0V
5.0V
VG=4.5V
AP09N20BGP-HF
Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics
Fig 9. Maximum Safe Operating Area Fig10. Effective Transient Thermal Impedance
Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform
4
td(on) trtd(off) tf
VDS
VGS
10%
90%
Q
VG
4.5V
QGS QGD
QG
Charge
0
200
400
600
800
1000
1 5 9 1317212529
VDS , Drain-to-Source Voltage (V)
C (pF)
f
=1.0MHz
Ciss
Coss
Crss
0
2
4
6
8
10
0 1020304050
QG , Total Gate Charge (nC)
VGS , Gate to Sourc e Voltage ( V)
I
D=5A
VDS =160V
0.01
0.1
1
0.00001 0.0001 0.001 0.01 0.1 1 10
t , Pulse Width (s)
Normalized Th e rmal Re sponse (Rthjc)
PDM
Duty factor = t/T
Peak Tj = PDM x Rthjc + TC
t
T
0.02
0.01
0.05
0.1
0.2
Duty factor=0.5
Single Pulse
0
1
10
100
0.1 1 10 100 1000
VDS , Drain-to-Source Voltage (V)
ID (A)
Tc=25oC
Single Pulse
100us
1ms
10ms
100ms
1s
DC
Operation in this area
limited by RDS(ON)
