14
Couplers with Connectors (H Type)
HDH Series ■Features
1.High Performance
The high frequency characteristics feature
extremely low loss, a high degree of matching, and
high isolation.
2.Power Uniform Distribution and
90˚Phase Difference Type
This is a one input, two output (or two input, one
output) power uniform distribution type having a
90˚phase difference between the two outputs (or
two inputs).
3.Miniature and Lightweight
Corrosion-resistant aluminum is used for the case
and the Hirose Electric original pattern design,
which uses a stripline triplate method, enables the
couplers to be miniature and lightweight.
4.Couplers with SMA Connectors
Use of SMA connectors (Hirose Electric HRM
Series) which feature stainless steel for the exterior
cladding make these couplers durable.
■Product Specifications
Note: The frequency range and the maximum input power will differ depending on the products.
●The test method conforms to MIL-STD-202.
■Materials
Ratings
Frequency range (Note)
Characteristic impedance
Maximum Input Power (Note)
0.5 to 14.5 GHz
50 ohm
2 to 50 W
Operating temperature range
Operating relative humidity
-10çto +65ç
95% Max.
Item Standard Conditions
1.Vibration
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s
2
for 2 hours in each of 3 directions
2.Shock Acceleration of 490 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
3.Temperature cycle No damage, cracks, or parts dislocation
Connector Body Stainless steel Passivated
Connector female contacts
Beryllium copper Gold plating
Connector Insulator PTFE ---------
Case Aluminum Coating
Board Dielectric Gold plating
Part Material Finish
HDH-00803GHD(40) HDH-01503GHD(40)
HDH-01503GH(40) HDH-03003GHD(40)
HDH-06003GHD(40) HDH-09003GHD(40) HDH-12803CHD(40)
Temperature :
_55ç→+15çto +35ç→+85ç→+15çto +35ç
Time : 30 →15 max. →30 →15 max. (Minutes)
5 cycles
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
15
HDH Series●Couplers with Connectors (H Type)
Series Name: HD (Directional Couplers)
Type of Connector
H: Indicates the HRM (SMA) Series
Center Frequency
008: 0.75GHz
015: 1.5GHz
017: 1.7GHz
020: 2.0GHz
030: 3.0GHz
040: 4.0GHz
060: 6.0GHz
090: 9.0GHz
128:12.8GHz
■Ordering Information
■Specifications
HD H - 008 03 G H D (40)
1 2 3 4 5 6 78
1
2
3
Coupling
03:3dB
Frequency Relative Bandwidth
B:From 5% to below 10%
C:From 10% to below 15%
D:From 15% to below 20%
G:From 30% to below 35%
Form
H:H Type
D:With Termination
(40):RoHS Compliant
4
5
6
7
8
●Directivity have had the coupling (nominal value of 3 dB) subtracted.
●There is a phase difference of 90°between the output and the coupling.
Frequency
Range
(GHz)
Coupling
(dB) Frequency
Sensitivity Directivity
(dB Min)
Primary Line
V.S.W.R.
(Max)
Secondary Line
V.S.W.R.
(Max)
Weight
(g) Power
(W) RoHS
HDH-00803GHD(40)
HDH-01503GH(40)
HDH-01503GHD(40)
HDH-01703CH(40)
HDH-01703CHD(40)
HDH-02003DHD(40)
HDH-03003GHD(40)
HDH-04003BH(40)
HDH-06003GHD(40)
HDH-09003GHD(40)
HDH-12803CHD(40)
0.5~1.0
1.0~2.0
1.0~2.0
1.5~1.9
1.5~1.9
1.7~2.3
2.0~4.0
3.7~4.2
4.0~7.8
8.0~11.0
10.5~14.5
3+0.2
3+0.2
3+0.2
3+0.2
3+0.2
3+0.2
3+0.2
3+0.2
3+0.3
3+0.3
3+0.6
±0.5
±0.5
±0.5
±0.3
±0.3
±0.3
±0.5
±0.3
±0.5
±0.5
±0.5
20
20
20
20
20
18
18
20
17
15
12
1.15
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.25
1.30
1.40
1.15
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.25
1.30
1.40
49
34
34
34
34
34
25
23
23
31
31
2
50
2
50
2
2
2
50
2
2
2
YES
0
0
0
0
0
0
0
0
0
0
0
Part Number
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
16
HDH Series●Couplers with Connectors (H Type)
■External Dimensions
(40)(40)
(40)
(40)
(40)
(40)
(40)
(40)(40)
(40)(40)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
17
HDH Series●Couplers with Connectors (H Type)
■Typical Data
(40) (40)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
1.Vibration
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s
2
for 2 hours in each of 3 directions
2.Shock Acceleration of 980 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature :
_55ç
→
+15çto +35ç
→
+85ç
→
+15çto +35ç
3.Temperature cycle No damage, cracks, or parts dislocation Time : 30 →15 max. →30 →15 max. (Minutes)
5 cycles
18
Couplers with Connectors (I Type)
HDH Series ■Features
1.High Performance
The high frequency characteristics feature.
Extremely high degree of matching, and high
isolation.
2.Miniature and Lightweight
Corrosion-resistant aluminum is used for the case
and the Hirose Electric original pattern design,
which uses a stripline triplate method, enables the
couplers to be miniature and lightweight.
3.Couplers with SMA Connectors
Use of SMA connectors (Hirose Electric HRM
Series) which feature stainless steel for the exterior
cladding make these couplers durable.
4.Full Coupling Variations
Full variations of coupling over 6 dB are available.
■Product Specifications
Note: The frequency range and the maximum input power will differ depending on the products.
●The test method conforms to MIL-STD-202.
■Materials
Ratings
Frequency range (Note)
Characteristic impedance
Maximum Input Power (Note)
0.5 to 14.5 GHz
50 ohm
4 to 50 W
Operating temperature range
Operating relative humidity
-10çto +65ç
95% Max.
Item Standard Conditions
Connector Body Stainless steel Passivated
Connector female contacts
Beryllium copper Gold plating
Connector Insulator PTFE ---------
Case Aluminum Coating
Board Dielectric Gold plating
Part Material Finish
HDH-01510GID(40)
HDH-02249AI(40) HDH-03020GID(40)
HDH-12806CID(40)
HDH-09010GID(40)HDH-06020GID(40)
HDH-00810GID(40)
No electrical discontinuity of 1µs or more
No damage, cracks, or parts dislocation
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
19
HDH Series●Couplers with Connectors (I Type)
■Ordering Information
■Specifications
Series Name: HD (Directional Couplers)
Type of Connector
H: Indicates the HRM (SMA) Series
Center Frequency
008 : 0.8GHz
009 : 0.9GHz
015 : 1.5GHz
017 : 1.7GHz
022 : 2.2GHz
030 : 3.0GHz
060 : 6.0GHz
090 : 9.0GHz
128 : 12.8GHz
Coupling
06 : 6dB
10 : 10dB
20 : 20dB
30 : 30dB
37 : 37dB
49 : 49dB
Frequency Relative Bandwidth
C: From 10% to below 15%
G: From 30% to below 35%
Form
I: I Type, H: H Type
D: With Termination
Isolation port with termination is designated
as D at the end of each part No.
(40): RoHS Compliant
HD H - 008 10 G I D (40)
1 2 3 4 5 678
1
2
3
4
5
6
7
8
HDH-0810GID(40)
HDH-00820GID(40)
HDH-00937CI(41)
HDH-01510GID(40)
HDH-01520GID(40)
HDH-01530CI(40)
HDH-01537CI(40)
HDH-01706CID(40)
HDH-01710CID(40)
HDH-01720CID(40)
HDH-01730CID(40)
HDH-02210AI(40)
HDH-02220AID(40)
HDH-02249AI(40)
HDH-03010GID(40)
HDH-03020GID(40)
HDH-06010GID(40)
HDH-06020GID(40)
HDH-09006GID(40)
HDH-09010GID(40)
HDH-09020GID(40)
HDH-12806CID(40)
HDH-12810CID(40)
HDH-12820CID(40)
0.5~1.0
0.5~1.0
0.8~1.0
1.0~2.0
1.0~2.0
1.4~1.6
1.4~1.6
1.5~1.9
1.5~1.9
1.5~1.9
1.5~1.9
2.11~2.2
2.11~2.2
2.11~2.2
2.0~4.0
2.0~4.0
4.0~7.8
4.0~7.8
8.0~11.0
8.0~11.0
8.0~11.0
10.5~14.5
10.5~14.5
10.5~14.5
10±1.0
20±1.0
37±1.0
10±1.2
20±1.2
30+1.0
37+1.0
6±1.0
10±1.2
20±1.2
30±1.5
10±1.0
20±1.0
49±1.0
10±1.2
20±1.2
10±1.2
20±1.2
6±1.2
10±1.2
20±2.0
6±1.0
10±1.25
20±1.25
±0.75
±0.75
±0.50
±0.75
±0.75
±0.25
±0.30
±0.30
±0.30
±0.40
±0.40
±0.25
±0.25
±0.25
±0.75
±0.75
±0.75
±0.75
±0.75
±0.75
±0.75
±0.50
±0.50
±0.50
0.3
0.3
0.3
0.4
0.4
0.5
0.5
0.4
0.4
0.4
0.4
0.8π
0.3
0.3
0.5
0.5
0.5
0.5
0.5
0.5
0.5
2.1π
1.1π
0.6
20
18
20
20
18
20
20
18
20
20
18
18
16
15
18
18
17
17
15
15
13
15
15
15
1.15
1.15
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.25
1.25
1.30
1.30
1.30
1.30
1.30
1.30
1.15
1.15
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.25
1.25
1.30
1.30
1.30
1.35
1.35
1.35
49
50
50
34
34
34
34
34
34
34
34
42
42
42
25
25
23
23
24
24
24
28
28
28
10
50
50
10
50
50
50
05
10
50
50
50
50
50
10
50
10
50
04
10
10
04
10
50
YES
Frequency
Range
(GHz)
Coupling
(dB)
Frequency
Sensitivity
(dB)
Insertion
Loss
(dB MAX)
Directivity
(dB MIN)
Primary Line
V.S.W.R.
(MAX)
Secondary
Line
V.S.W.R.
(MAX)
Weight
(g) Power
(W) RoHS
●The coupling loss component is not included in the insertion loss (unless the item is marked with an πsymbol)
_2.0
_1.5
Part Number
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
20
HDH Series●Couplers with Connectors (I Type)
■External Dimensions
(40)
(40)
(40)
(40)
(40)
(41)
(40) (40) (40)
(40)
(40)
(40)
(40) (40)
(40) (40)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
21
HDH Series●Couplers with Connectors (I Type)
■Typical Data
HDH-01510GID(40)
HDH-03020GID(40)
HDH-01530CI(40)
HDH-09010GID(40)
HDH-01537CI(40)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
