LCA.... Vishay Draloric Standard Carbon Film Leaded Resistors FEATURES * Securely bonded carbon film * Good moisture resistance (Rmax. 1.5 % R) * Good long term stability (Rmax. 1.5 % R, for 1000 h) * Low noise (refer to graph) * Suitable for general purpose commercial electronics and pulse load applications * Lead (Pb)-free solder contacts * Pure tin plating provides compatibility with lead (Pb)-free and lead containing soldering processes * Compliant to RoHS directive 2002/95/EC STANDARD ELECTRICAL SPECIFICATIONS MODEL SIZE RATED DISSIPATION P70 W LIMITING ELEMENT VOLTAGE Umax. V TOLERANCE % RESISTANCE RANGE E-SERIES LCA0207 0207 0.35 300 2 5 1 to 1 M 0.22 to 5.1 M E24 E24 LCA0414 0414 0.6 500 2 5 1 to 1 M 0.22 to 10 M E24 E24 Notes * Coating: Light blue * Marking: Color coded. Additional blue color marking after second band TECHNICAL SPECIFICATIONS PARAMETER UNIT LCA0207 LCA0414 Rated Dissipation, P70 W 0.35 0.6 Limiting Element Voltage, Umax. (1) V 300 500 Limiting Voltage, Short-Time V 500 1000 Insulation Voltage, Uins (1 Min) V > 700 > 700 Thermal Resistance K/W 220 140 Insulation Resistance 1011 Category Temperature Range C - 55 to + 155 10-9/h < 10 Failure Rate Weight Note (1) Rated voltage www.vishay.com 220 g 0.21 0.68 P x R For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 20135 Revision: 17-Dec-09 LCA.... Standard Carbon Film Leaded Resistors Vishay Draloric PART NUMBER AND PRODUCT DESCRIPTION LCA-SERIES PART NUMBER: LCA0207002401J2500 L C A 0 2 0 7 0 0 2 4 0 1 J 2 5 0 0 MODEL/SIZE VARIANT TCR VALUE TOLERANCE PACKAGING (1) SPECIAL LCA0207 LCA0414 0 = Neutral 0 = Neutral See diagram 3 digit value 1 digit multiplier MULTIPLIER G=2% J=5% 25 = A5 22 = A2 (G53) 21 = A1 D5 = R5 D2 = R2 Up to 2 digits 00 = Standard 7 = *10-3 8 = *10-2 9 = *10-1 0 = *100 1 = *101 2 = *102 3 = *103 4 = *104 5 = *105 6 = *106 PRODUCT DESCRIPTION: LCA0207 2K4 5 % A5 LCA0207 2K4 5% A5 MODEL RESISTANCE VALUE TOLERANCE PACKAGING (1) LCA0207 LCA0414 220K = 220 k 10R = 10 2% 5% A5 A1 A2 R5 R2 Notes (1) Please refer to table PACKAGING * The PART NUMBER shown above is to facilitate the unified part numbering system for ordering products PACKAGING REEL MODEL BOX PIECES/REEL CODE MIN. ORDER QTY PACKAGING UNITS PIECES/BOX CODE MIN. ORDER QTY PACKAGING UNITS LCA0207 5000 R5 1 5000 2000 A5 A2 1 1 LCA0414 2000 R2 1 1000 A1 1 DIMENSIONS 6 mm L1 L DIMENSIONS in millimeters D MODEL d e B Dmax. L L1 B d e LCA0207 2.4 - 0.3 6.1 - 0.5 8.1 53 1 0.6 7.5 LCA0414 4.2 - 0.5 12.2 - 0.7 14.2 53 1 0.8 15.0 120 TEMPERATURE RISE IN C % RATED POWER Notes * Taping in acc. with IEC 60286-1 * D and L measured in acc. with IEC 60294 * d according to IEC 60301 100 80 60 40 300 200 0414 0207 100 20 0 - 55 - 25 0 25 DERATING Document Number: 20135 Revision: 17-Dec-09 50 75 70 100 125 150 175 200 0 0 0.5 1.0 1.5 2.0 2.5 POWER IN W AMBIENT TEMP. IN C TEMPERATURE RISE For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com 221 LCA.... Standard Carbon Film Leaded Resistors 120 CURRENT URRENT N NOISE OI (V/V) NON-LINEARITY A3 in dB Vishay Draloric 110 0414 0207 100 90 80 1 0.5 60 100 1K 10K 100K NON-LINEARITY 1M 10M RESISTANCE CHANGE R /R [%] 0 - 200 - 400 - 600 0414 0207 - 1000 1K 10K 1M 100K CURRENT NOISE RESISTANCE VALUE [] - 800 0207 0414 0.3 0.2 0.1 0.05 0.03 0.02 0.01 70 TEMPERATURE COEFFICIENT [10-6/C] 5 3 2 10M RESISTANCE VALUE [] 3 2 1 0 -1 -2 - 1200 10 100 1K 10K 100K 1M 100 10M 1K 10K 100K 1M 10M RESISTANCE VALUE [] TEMPERATURE COEFFICIENT ENDURANCE (mean value) between - 25 C to + 125 C deviation 25 % at upper category temperature, 155 C 1000 h STABILITY NOMOGRAM, TYPICAL VALUES (For handling see General Information) 140 120 0207 0414 100 80 60 40 u = f [P ] PARAMETER: SIZE 1.8 1.6 20 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 0 t= 10 00 0.1 h 0.5 0 10 00 h h 10 5 100 10 3 30 RESISTANCE CHANGE R /R [%] www.vishay.com 222 1 00 h 00 h 50 00 20 1 0.3 100 10 0.1 u = f [s] PARAMETER: u = u 20 C C 40 60 80 C C 80 60 C 0 40 10 20 12 C 0 C 0 14 20 LOAD P [W] R /R (t) = f [ R/R (t = 1000 h)] PARAMETER: TIME 120 0 0 RESISTANCE CHANGE R /R [%] after 1000 h 2.2 2.0 TEMPERATURE RISE u [C] 140 40 60 80 100 120 140 160 180 FILM TEMPERATURE s [C] 0.1 100 R10K 1K 100 K 1M 0.5 1 R/R [t = 1000 h] = f [s] PARAMETER: RESISTANCE VALUE 5 10 20 40 60 For technical questions, contact: filmresistorsleaded@vishay.com 80 100 120 140 160 180 FILM TEMPERATURE s [C] Document Number: 20135 Revision: 17-Dec-09 LCA.... 1000 100 041 4 020 7 10 1 10-4 10-2 10-3 PULSE RATING P 0 041 4 10 020 7 Secondary conditions: a) P P70 (permissible constant power at u = 70 C) b) u 70 C c) R 10 d) U max. see diagram below 10-4 10-3 10-2 PULSE RATING P P 70 IMPEDANCE 2000 100 0.1 -5 10 10 10-1 100 SQUARE PULSE t i (s) Vishay Draloric 1000 1 Secondary conditions: a) P b) u 70 C c) R 10 d) U max. see diagram below 0.1 10-5 PULSE VOLTAGE UMAX. [V] POWER RATING P [W] POWER RATING P [W] Standard Carbon Film Leaded Resistors 10-1 100 10 SQUARE PULSE t i (s) 10K 10K 1K 0414 1K 100 0207 1000 100 Secondary conditions: a) P max. see diagram below b) u 70 C 0 10 -5 10 -4 10 -3 10 10 -2 -1 MAXIMUM PULSE VOLTAGE 0 10 10 10 10 SQUARE PULSE t i (s) 1 10 100 1000 FREQUENCY IN MHz HF CHARACTERISTICS LCA0207 PERFORMANCE CHARACTERISTICS CONDITIONS OF TEST REQUIREMENTS (R/R) (1) 1000 h at 70 C, 1.5 h ON, 0.5 h OFF 8000 h at 70 C, 1.5. h ON, 0.5 h OFF 1.5 % 4.0 % 1000 h at 155 C without load 8000 h at 155 C without load 3.0 % 8.0 % Overload Test IEC 60115-1, 4.13 2.5 x rated power or twice the limiting element voltage, 2 s for size 0207; 5 s for size 0414 0.5 % Thermal Shock IEC 60115-1, 4.19 Rapid change between upper and lower category temperature 0.25 % Climatic Sequence IEC 60115-1, 4.23 Dry heat, damp heat cyclic, cold, low air pressure 1.5 % 56 days; 40 C; 90 % to 95 % RH; loaded with 0.01 P70 1.5 % 10 s at 260 C solder bath temperature 0.25 % Tensile, bending and torsion 0.25 % Frequency 10 Hz to 500 Hz; displacement 1.5 mm or acceleration 10 g; three directions; 6 h 0.25 % TEST Endurance Test at 70 C IEC 60115-1, 4.25.1 Endurance at UCT IEC 60115-1, 4.25.3 Damp Heat Steady State IEC 60115, 4.24 Resistance to Soldering Heat IEC 60115-1, 4.18 Robustness of Terminations IEC 60115-1, 4.16 Vibration IEC 60115-1, 4.22 Note (1) For ohmic values between 10 and 1 M APPLICABLE SPECIFICATIONS * CECC 40101-806 * EN 140100; EN 60115-1 Document Number: 20135 Revision: 17-Dec-09 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com 223 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1