ca_D1-D102:Layout 1 2/10/11 11:51 AM Page 1
D
Microminiature
MDM Power
The same insulator that is used with coaxial contacts is
available with power contacts. This offers the versatility
of combining power and signal lines in the same connec-
tor.
MDM Coaxial/Power
Power and coaxial contacts can be interchanged as
desired. Power contacts are rated at 13 amps, 24V rms,
AWG #16 stranded.
MDM Coaxial
The MDM Metal Shell Connectors have been
tooled in several coaxial layouts and offer the
versatility of combining coaxial and signal lines
in the same connector. Any modifications to
these layouts or new requirements, please con-
sult the factory. Standard coax is RG178 white.
+ +
+ + + +
+ +
7C2/7P2
Plug
308 (7.82)
MAX
1.185 (30.10) MAX.
1.435 (36.45) MAX.
1.215 ± .005
(30.86 ± 0.13)
1.435 (36.45) MAX.
1.215 ± .005
(30.86 ± 0.13)
.351 (8.92)
MAX. .351 (8.92)
MAX.
.091 ± .003
(2.31 ± 0.08)DIA. .091 ± .003
(2.31 ± 0.08)DIA.
.091 ± .003
(2.31 ± 0.08)
.965 ± .005
(24.51 ± 0.13) .416 (10.57)
MAX.
.416 (10.51)
MAX.
.186 (4.92) MAX.
.186 (4.92)
MAX.
.100
(2.54)
MAX.
.100
(2.54)
MAX.
.800
(20.32)
MAX.
1.050
(26.67)
MAX.
.308 (7.82) MAX.
1.185 (30.10) MAX. .199 (5.05) MAX.
.199 (5.05)
MAX.
.429 (10.90)
MAX.
.429 (10.90)
MAX.
.100
(2.54)
MAX.
.100
(2.54)
MAX. 1.050
(26.67)
MAX.
.800
(20.32)
MAX.
.965 ± .005
(24.51 ± 0.13)
.091 ± .003
(2.31 ± 0.08)DIA.
DIA.
Plug
Receptacle
Receptacle
24C4/24P4
For MIL-DTL-83513 ordering information see pages 16 and 17
SERIES
RoHS COMPLIANCE
MDM 51 P H 001 P XXX- -
SERIES
CONTACT ARRANGEMENTS
CONTACT TYPE
TERMINATION TYPE
CONTACT ARRANGEMENTS
CONTACT TYPE
TERMINATION TYPE
TERMINATION CODE
TERMINATION CODE*
HARDWARE
MDM: (Size 9-100) Liquid Crystal Polymer (LCP)
MDM: (Combo Layout) Diallyl Phthalate (DAP)
(H) 001 - 18",7/34 strand,#26 AWG,
MIL-W-16878/4, Type E Teflon, yellow.
(H) 003 - 18", 7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon,
color coded to MIL-STD-681 System I.
M - Military specification hardware, see
page 11 for military hardware codes.
P - Jackpost
K - Jackscrew-standard profile
L - Jackscrew-low profile
F - Float mount
B - No hardware standard
.091 (2.31) dia. hole for sizes 9-51;
.120 (3.05) dia. hole for size 100.
A - .125 (3.18) dia. mounting holes for sizes 9-51;
.166 (4.22) dia. hole for size 100.
B1 - .1475 (3.75) dia. hole for size 100
(Per MIL-DTL-83513)
No Number - (Standard cadmium/yellow
chromate over nickel
A174 - Electroless nickel
A172 - Gold over nickel
A141 - Irridite/alodine
A30 - Black anodize
*See pages D-98 to D-102 for additional Termination codes.
9-15-21-25-31-37-51-100 (standard)
16C5, 10C10, 7C2, 24C4 (coaxial)
16P5, 10P10, 7P2, 24P4 (power)
P - Pin S - Socket
H - Harness-insulated wire.
L - Solid-uninsulated wire.
S - Solder pot to accept #26 AWG MAX.
harness wire. (Not available with power
contact arrangements.)
or combination of
coax and power
SHELL FINISH MOD CODES
HARDWARE
SHELL FINISH MOD CODES
}
(L) 1 - 1/2" uninsulated solid #25
AWG gold plated copper.
(L) 2 - 1" uninsulated solid #25 AWG
gold plated copper.
R
Plug Receptacle
BACK POTTING
REQUIRED
.350 (8.89)
MAX.
Plug
Receptacle
D-24
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
Micro-D Coaxial/Power - .050" Contact Spacing
MDM C/P
Power Contacts Coaxial Contacts
www.ittcannon.com
ca_D1-D102:Layout 1 2/10/11 11:51 AM Page 24
