Oscillator Specification Part No. + Packaging: LFSPXO020599CUTT Description Standard 7 x 5mm crystal oscillator Ceramic package with a seam sealed metal lid, hermetically sealed Model CFPS-73 Model Issue number 12 Frequency Parameters Frequency 8.1920MHz Frequency Tolerance @ 25C INCLUSIVE Frequency Stability 50.00ppm Operating Temperature Range 0.00 to 70.00C Ageing 3ppm per year max Electrical Parameters Supply Voltage 3.3V Supply Voltage Tolerance 10% Current Draw 7mA max Output Details Output Compatability HCMOS Output Load 50pF max Rise and Fall time 10ns max Duty Cycle 45/55% Outline (mm) Output Control Logic `1' (>70% VS) to pad 1 enables oscillator output Logic `0' (<30% VS) to pad 1 disables oscillator output; the oscillator output goes to the high impedance state No connection to pad 1 enables oscillator output Standby Current: 10A max Noise Parameters Phase Noise @125MHz (typical): 10Hz -54dBc 100Hz -92dBc 1kHz -130dBc 10kHz -149dBc 100kHz -159dBc 1MHz -163dBc RMS Phase Jitter @125MHz: 52fs typical Test Circuit Environmental Parameters Shock: MIL-STD-202, Method 213, Condition E Vibration: MIL-STD-883, Method 2007, Condition A Storage Temperature Range: -55 to 125C Compliance RoHS Status REACh Status MSL Rating (JDEC-STD-033): Compliant Compliant Not Applicable Packaging Pack Type: Cutt Pack Size In tape, cut from a reel 10 Alternative packing option available This document is correct at the time of printing; please contact your local office for the latest version. Sales Office Contact Details: UK: +44 (0)1460 270200 France: +33 (0)5 34 50 91 18 Email: info@iqdfrequencyproducts.com Germany: +49 (0) 30 408 192 300 USA: +1 408.273.4530 Web: www.iqdfrequencyproducts.com Printed on 2 Oct 14 14:52 Page 1 of 2 Oscillator Specification Part No. + Packaging: LFSPXO020599CUTT Wave Form Phase Noise / Jitter Sales Office Contact Details: UK: +44 (0)1460 270200 France: +33 (0)5 34 50 91 18 Email: info@iqdfrequencyproducts.com Germany: +49 (0) 30 408 192 300 USA: +1 408.273.4530 Web: www.iqdfrequencyproducts.com Printed on 2 Oct 14 14:52 Page 2 of 2