PhotoMOS RELAYS GU (General Use) Type SOP Series 2-Channel (Form A) Type UL File No.: E43149 CSA File No.: LR26550 FEATURES 4.40.2 .173.008 2.10.2 .083.008 9.370.2 .369.008 1. 2 channels in super miniature design The device comes in a super-miniature SO package measuring (W) 4.4x(L) 9.37x(H) 2.1 mm (W) .173x(L) .369x(H) .083 inch--approx. 38% of the volume and 66% of the footprint size of DIP type PhotoMOS Relays. (DIP) (SOP) Approx. 38% Volume 3. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 4. Low-level off state leakage current In contrast to the SSR with an off state leakage current of several milliamps, the PhotoMOS relay features a very small off state leakage current of only 100 pA even with the rated load voltage of 400 V (AQW214S). Approx. 66% mm inch TYPICAL APPLICATIONS Footprint 2. Tape and reel The device comes standard in a tape and reel (1,000 pcs./reel) to facilitate automatic insertion machines. * Telephones * Measuring instruments * Computer * Industrial robots * High-speed inspection machines TYPES Output rating* Load voltage Part No. Load current Picked from the 5/6/7/8-pin side AQW210SZ AQW214SZ Picked from the 1/2/3/4-pin side AQW210SX AQW214SX Packing quantity in tape and reel 350 V 100 mA 1,000 pcs. 400 V 80 mA * Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suffix "X" or "Z" is not needed when ordering; Tube: 50 pcs.; Case: 1,000 pcs.) (2) For space reasons, the package type indicator "X" and "Z" are omitted from the seal. AC/DC type RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Item Input Output Symbol AQW210S AQW214S Remarks LED forward current IF 50 mA LED reverse voltage VR 3V Peak forward current IFP 1A Power dissipation Pin Load voltage (peak AC) VL 350 V 400 V Continuous load current IL 0.1 A (0.13 A) 0.08 A (0.1 A) ( Peak load current Ipeak 0.3 A 0.24 A A connection: 100ms (1 shot), VL = DC Power dissipation Pout 75 mW ): in case of using only 1 channel 600 mW Total power dissipation PT 650 mW I/O isolation voltage Viso 1,500 V AC Temperature limits f = 100 HZ, Duty factor = 0.1% Operating Topr -20C to +80C -4F to +176F Storage Tstg -40C to +100C -40F to +212F Non-condensing at low temperatures 2. Electrical characteristics (Ambient temperature: 25C 77F) Symbol Item Input AQW214S LED operate current Minimum Typical Maximum IFon LED turn off current Minimum Typical Maximum IFoff LED dropout voltage Minimum Typical Maximum VF On resistance Minimum Typical Maximum Ron Minimum Off state Typical leakage current Maximum ILeak Turn on time* Minimum Typical Maximum Ton Turn off time* Minimum Typical Maximum Toff 0.04 ms 0.2 ms Minimum I/O capacitance Typical Maximum Ciso 0.8 pF 1.5 pF Minimum Initial I/O isolaTypical tion resistance Maximum Riso Output Transfer characteristics AQW210S Condition IL = Max. 0.9 mA 3 mA 0.4 mA 0.8 mA IL = Max. 1.14 V (1.25 V at IF = 50 mA) 1.5 V 16 35 IF = 5 mA IF = 5 mA IL = Max. Within 1 s on time 30 50 IF = 0 mA IL = Max. 1 A 0.23 ms 0.5 ms IF = 5 mA IL = Max. 0.21 ms 0.5 ms IF = 5 mA IL = Max. f = 1 MHZ VB = 0 1,000 M 500 V DC Note: Recommendable LED forward current IF = 5 mA. *Turn on/Turn off time Input 90% Output 10% Ton M For Dimensions M For Schematic and Wiring Diagrams M For Cautions for Use Toff REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Turn on time vs. ambient temperature characteristics Allowable ambient temperature: -20C to +80C -4F to +176F Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 50 1.0 AQW210S 100 AQW214S 80 60 AQW214S 40 30 AQW210S 20 0.8 Turn on time, ms On resistance, Load current, A 120 AQW210S 0.6 AQW214S 0.4 40 10 0.2 20 0 -20 0 20 40 60 80 Ambient temperature, C 0 -20 0 20 40 60 Ambient temperature, C 80 0 -20 0 20 40 60 Ambient temperature, C 80 4. Turn off time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics 6. LED turn off current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: All types; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: All types; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED operate current, mA Turn off time, ms 0.3 0.2 0.1 AQW214S 5 LED turn off current, mA 5 0.4 4 3 2 1 4 3 2 1 AQW210S 0 -20 0 20 40 60 0 80 -20 0 Ambient temperature, C 20 40 60 0 80 -20 0 7. LED dropout voltage vs. ambient temperature characteristics 8. Voltage vs. current characteristics of output at MOS portion Sample: All types; LED current: 5 to 50 mA Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F 20 40 60 80 Ambient temperature, C Ambient temperature, C 9. Off state leakage current Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F 1.4 1.3 1.1 AQW214S 60 40 30mA 20mA 1 2 3 4 5 -20 Voltage, V -40 10mA 5mA -60 0 10-6 10-9 AQW214S AQW210S 10-12 -100 -20 10-3 -80 1.0 0 80 20 -5 -4 -3 -2 -1 50mA 1.2 AQW210S 100 Off state leakage current, A Current, mA LED dropout voltage, V 1.5 0 20 40 60 80 Ambient temperature, C 20 60 40 80 Load voltage, V 100 10. LED forward current vs. turn on time characteristics 11. LED forward current vs. turn off time characteristics 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz; Ambient temperature: 25C 77F 1.4 Output capacitance, pF 1.2 50 0.10 AQW210S Turn off time, ms Turn on time, ms 0.08 1.0 0.8 0.6 AQW214S 0.06 AQW214S 0.04 AQW210S 40 30 20 0.4 10 0.02 0.2 0 0 10 20 30 40 50 LED forward current, mA 6/1/1999 60 10 20 30 40 50 LED forward current, mA 0 0 10 20 30 40 50 Applied voltage, V All Rights Reserved, (c) Copyright Matsushita Electric Works, Ltd. Go To Online Catalog