GU (General Use) Type
SOP Series
2-Channel (Form A) Type PhotoMOS
RELAYS
FEATURES
1. 2 channels in super miniature
design
The device comes in a super-miniature
SO package measuring (W) 4.4×(L)
9.37×(H) 2.1 mm (W) .173×(L) .369×(H)
.083 inch—approx. 38% of the volume
and 66% of the footprint size of DIP type
PhotoMOS Relays.
mm inch TYPICAL APPLICATIONS
• Telephones
• Measuring instruments
• Computer
• Industrial robots
• High-speed inspection machines
UL File No.: E43149
CSA File No.: LR26550
TYPES
RATING
1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)
9.37±0.2
.369±.008
4.4±0.2
.173±.008
2.1±0.2
.083±.008
Volume
(SOP)(DIP) Approx. 38%
Footprint Approx. 66%
2. Tape and reel
The device comes standard in a tape
and reel (1,000 pcs./reel) to facilitate
automatic insertion machines.
3. Controls low-level analog signals
PhotoMOS relays feature extremely low
closed-circuit offset voltage to enable
control of low-level analog signals with-
out distortion.
4. Low-level off state leakage current
In contrast to the SSR with an off state
leakage current of several milliamps, the
PhotoMOS relay features a very small off
state leakage current of only 100 pA
even with the rated load voltage of 400 V
(AQW214S).
AC/DC type
Output rating*
Load voltage
350 V
400 V
Load current
100 mA
80 mA
Part No.
Picked from the 1/2/3/4-pin side
AQW210SX
AQW214SX
Picked from the 5/6/7/8-pin side
AQW210SZ
AQW214SZ
Packing quantity
in tape and reel
1,000 pcs.
* Indicate the peak AC and DC values.
Notes: Tape package is the standard packing style. Also available in tube. (Part No. suffix “X” or “Z” is not needed when ordering; Tube: 50 pcs.;
Case: 1,000 pcs.)
For space reasons, the package type indicator “X” and “Z” are omitted from the seal.
(1)
(2)
Item
Input
Out-
put
Total power dissipation
I/O isolation voltage
Temperature
limits Operating
Storage
LED forward current
LED reverse voltage
Peak forward current
Power dissipation
Load voltage (peak AC)
Continuous load current
Peak load current
Power dissipation
Symbol
IF
VR
IFP
Pin
VL
IL
Ipeak
Pout
PT
Viso
Topr
Tstg
AQW210S AQW214S
50 mA
3 V
1 A
75 mW
350 V
0.1 A
(0.13 A) 0.08 A
(0.1 A)
400 V
0.3 A 0.24 A
600 mW
650 mW
1,500 V AC
–20°C to +80°C –4°F to +176°F
–40°C to +100°C –40°F to +212°F
Remarks
f = 100 HZ, Duty factor = 0.1%
( ): in case of using only 1 channel
A connection: 100ms (1 shot), VL = DC
Non-condensing at low temperatures
2. Electrical characteristics (Ambient temperature: 25°C 77°F)
Item
Input
Output
Transfer
characteristics
LED operate
current
LED turn off
current
LED dropout
voltage
On resistance
Off state
leakage current
Turn on time*
Turn off time*
I/O capacitance
Initial I/O isola-
tion resistance
Minimum
Typical
Maximum
Minimum
Typical
Maximum
Minimum
Typical
Maximum
Minimum
Typical
Maximum
Minimum
Typical
Maximum
Minimum
Typical
Maximum
Minimum
Typical
Maximum
Minimum
Typical
Maximum
Minimum
Typical
Maximum
Sym-
bol
IFon
IFoff
VF
Ron
ILeak
Ton
Toff
Ciso
Riso
AQW210S AQW214S
0.9 mA
3 mA
0.4 mA
0.8 mA
1.14 V (1.25 V at IF = 50 mA)
1.5 V
16 Ω
35 Ω30 Ω
50 Ω
1 µA
0.23 ms
0.5 ms
0.04 ms
0.2 ms
0.8 pF
1.5 pF
0.21 ms
0.5 ms
1,000 MΩ
Condition
IL = Max.
IL = Max.
IF = 5 mA
IF = 5 mA
IL = Max.
Within 1 s on time
IF = 0 mA
IL = Max.
IF = 5 mA
IL = Max.
IF = 5 mA
IL = Max.
f = 1 MHZ
VB = 0
500 V DC
Note: Recommendable LED forward current IF = 5 mA.
MFor Dimensions
MFor Schematic and Wiring Diagrams
MFor Cautions for Use
REFERENCE DATA
1. Load current vs. ambient temperature char-
acteristics
Allowable ambient temperature: –20°C to +80°C
–4°F to +176°F
2. On resistance vs. ambient temperature char-
acteristics
Measured portion: between terminals 5 and 6, 7 and 8;
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
3. Turn on time vs. ambient temperature
characteristics
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
0
10
20
30
40
–20
50
020406080
AQW210S
AQW214S
Ambient temperature, °C
On resistance, Ω
0
40
60
020406080–20
20
AQW210S
AQW214S
80
100
120
Ambient temperature, °C
Load current, A
0
0.4
0.6
–20
1.0
020406080
0.2
0.8
AQW210S
AQW214S
Ambient temperature, °C
Turn on time, ms
Ton
Input
Output 10%
90%
*Turn on/Turn off time
Toff
5. LED operate current vs. ambient tempera-
ture characteristics
Sample: All types; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
6. LED turn off current vs. ambient
temperature characteristics
Sample: All types; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
4. Turn off time vs. ambient temperature char-
acteristics
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
7. LED dropout voltage vs. ambient
temperature characteristics
Sample: All types; LED current: 5 to 50 mA
0
0.1
0.2
0.3
0.4
–20 020406080
AQW214S
AQW210S
Ambient temperature, °C
Turn off time, ms
0
1.0
1.1
1.2
1.3
–20 020406080
1.4
50mA
30mA
20mA
10mA
5mA
1.5
Ambient temperature, °C
LED dropout voltage, V
8. Voltage vs. current characteristics of
output at MOS portion
Measured portion: between terminals 5 and 6, 7 and 8;
Ambient temperature: 25°C 77°F
531
–5 –3 –1
–100
–60
–20
60
20
40
100
–40
–80
–2–4 24
80
AQW210S
AQW214S
Voltage, V
Current, mA
0
0.02
0.04
0.08
0.06
10 20 30 40
0.10
50
AQW210S
AQW214S
LED forward current, mA
Turn off time, ms
0
0.2
0.4
0.6
0.8
1.4
1.0
10 20 30 40 50 60
AQW214S
AQW210S
1.2
LED forward current, mA
Turn on time, ms
0
10
20
50
10 20 30 40 50
30
40
0Applied voltage, V
Output capacitance, pF
9. Off state leakage current
Measured portion: between terminals 5 and 6, 7 and 8;
Ambient temperature: 25°C 77°F
060 100
10–3
10–6
10–9
10–12
AQW214S
20 40 80
AQW210S
Load voltage, V
Off state leakage current, A
0
1
2
3
4
–20
5
020406080
Ambient temperature, °C
LED turn off current, mA
10. LED forward current vs. turn on time charac-
teristics
Measured portion: between terminals 5 and 6, 7 and 8;
Load voltage: Max. (DC); Continuous load current:
Max. (DC); Ambient temperature: 25°C 77°F
11. LED forward current vs. turn off time charac-
teristics
Measured portion: between terminals 5 and 6, 7 and 8;
Load voltage: Max. (DC); Continuous load current:
Max. (DC); Ambient temperature: 25°C 77°F
12. Applied voltage vs. output capacitance char-
acteristics
Measured portion: between terminals 5 and 6, 7 and 8;
Frequency: 1 MHz; Ambient temperature: 25°C 77°F
Go To Online Catalog
6/1/1999 All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.