CSD161610 - PENTAIR - Datasheet.Live

Home News Distributors Literature Contact Us
¶PRODUCT RESOURCES
Specification Sheet
Print Page
Contact Us
Part Details
SHARE THIS PRODUCT
    
English | Français
Type 4X Diecast Aluminum Enclosures R100 Series
Watertight, Thick Wall
Home / Small Enclosures / Diecast Enclosures / Rolec Diecast Enclosures
Key Features
Material ‐ Aluminum die‐cast: G AI SI 12 / DIN 1775
Shallow lid, deep body
Captive stainless steel lid screws
Neoprene oil and petrol resistant gasket standard. ﴾‐40ºC up to +80ºC﴿
Degree of protection NEMA 4X, IP66, DIN 40050
Temperature Range ﴾‐40ºC up to +80ºC﴿
Single‐channel Fastening System
Special developed external mounting feet made from zinc‐die‐cast. Can be
turned through 90º. The fastening holes have engagement lugs for this
purpose. ﴾See accessories﴿
All sizes have inner blind holes.
An inner mounting panel ‐ made of zinc‐plated steel is also available ﴾See accessories﴿
Textured polyester powder coat, light grey RAL7032. ﴾can be supplied unpainted on special order﴿
CSA certified, UL Listed, Type 4, for use with industrial control equipment.
Features
1.  Lid screws and mounting holes outside of the gasket seal.
2.  Space saving single channel mounting ﴾ie...same hole used for mounting enclosure through rear and also for the
lid﴿, provides larger interior space than dual channel enclosures.
3.  Captive stainless steel lid screws.
4.  Enclosure holes threaded for easy installation and repetitive assembly & disassembly.
5.  Internal mounting shelves placed along both sides of enclosure include blind holes and grounding screws.
Patented Single Channel System
Provides larger interior space than dual channel enclosures.
Uses the same enclosure hole for mounting the enclosure and fastening the lid.
Quality Products. Service Excellence.
Advanced Part Search
Resources  Corporate 
Quick Search

External Mounting Feet Inner Panel Hinge Kit
Accessories ﴾see table below for compatibility﴿
Part Details
Click part number for details (e.g., CAD files, assembly instructions, ship weight)
Shallow Lid, Deep Body ﴾R100 Series﴿
Units shown: mm. Switch units to: inch
Part No. Width Length Depth ﴾Including Lid﴿
R100‐060‐000 65 50 40
R100‐062‐000 65 65 40
R100‐064‐000 65 100 40
R100‐066‐000 65 150 40
R100‐080‐000 80 80 60
R100‐082‐000 80 120 60
R100‐084‐000 80 160 60
R100‐100‐000 100 100 80
R100‐102‐000 100 150 80
R100‐104‐000 100 200 80
R100‐120‐000 120 120 100
R100‐122‐000 120 180 100
R100‐124‐000 120 240 100
R100‐160‐000 160 160 100
R100‐162‐000 160 240 100
R100‐164‐000 160 320 100
R100‐166‐000 160 480 100
R100‐200‐000 200 200 120
R100‐202‐000 200 300 120
R100‐204‐000 200 400 120
R100‐240‐000 240 240 120
R100‐242‐000 240 360 120
R100‐244‐000 240 480 120
R100‐320‐000 320 320 120
R100‐322‐000 320 480 120
R100‐324‐000 320 640 120
Deep Lid, Shallow Body ﴾R101 Series﴿
Units shown: mm. Switch units to: inch
Part No. Width Length Depth ﴾Including Lid﴿
R101‐080‐000 80 80 60
R101‐082‐000 80 120 60
R101‐084‐000 80 160 60
R101‐100‐000 100 100 80
R101‐102‐000 100 150 80
R101‐104‐000 100 200 80
R101‐120‐000 120 120 100
R101‐122‐000 120 180 100
R101‐124‐000 120 240 100
R101‐160‐000 160 160 100

Part No. Width Length Depth ﴾Including Lid﴿
R101‐162‐000 160 240 100
R101‐164‐000 160 320 100
R101‐166‐000 160 480 100
R101‐200‐000 200 200 120
R101‐202‐000 200 300 120
R101‐204‐000 200 400 120
R101‐240‐000 240 240 120
R101‐242‐000 240 360 120
R101‐244‐000 240 480 120
R101‐320‐000 320 320 120
R101‐322‐000 320 480 120
R101‐324‐000 320 640 120
Matching Lid & Body ﴾R102 Series﴿
Units shown: mm. Switch units to: inch
Part No. Width Length Depth ﴾Including Lid﴿
R102‐080‐000 80 80 40
R102‐082‐000 80 120 40
R102‐084‐000 80 160 40
R102‐100‐000 100 100 54
R102‐102‐000 100 150 54
R102‐104‐000 100 200 54
R102‐120‐000 120 120 66
R102‐122‐000 120 180 66
R102‐124‐000 120 240 66
R102‐160‐000 160 160 66
R102‐162‐000 160 240 66
R102‐164‐000 160 320 66
R102‐166‐000 160 480 66
R102‐200‐000 200 200 80
R102‐202‐000 200 300 80
R102‐204‐000 200 400 80
R102‐240‐000 240 240 80
R102‐242‐000 240 360 80
R102‐244‐000 240 480 80
R102‐320‐000 320 320 80
R102‐322‐000 320 480 80
R102‐324‐000 320 640 80
aluNORM Accessories
External Feet Inner Panel 2mm, Hinge
For Use With ﴾Set of 2 or 4﴿ Galvanized Steel ﴾Set of 2﴿
Enclosure Types Part No. Part No. Part No.
R100, R101 & R102‐060 N/A N/A N/A
R100, R101 & R102‐062 N/A R507‐062‐000 N/A
R100, R101 & R102‐064 N/A R507‐064‐000 N/A
R100, R101 & R102‐066 N/A R507‐066‐000 N/A
R100, R101 & R102‐080 R501‐002‐080 R507‐080‐000 N/A
R100, R101 & R102‐082 R501‐002‐080 R507‐082‐000 N/A
R100, R101 & R102‐084 R501‐002‐080 R507‐084‐000 N/A
R100, R101 & R102‐100 R501‐002‐100 R507‐100‐000 N/A
R100, R101 & R102‐102 R501‐002‐100 R507‐102‐000 R510‐000‐000
R100, R101 & R102‐104 R501‐002‐100 R507‐104‐000 R510‐000‐000
R100, R101 & R102‐120 R501‐000‐011 R507‐120‐000 R510‐000‐000
R100, R101 & R102‐122 R501‐000‐011 R507‐122‐000 R510‐000‐000
R100, R101 & R102‐124 R501‐000‐011 R507‐124‐000 R510‐000‐000
R100, R101 & R102‐160 R501‐000‐012 R507‐160‐000 R510‐000‐000
R100, R101 & R102‐162 R501‐000‐012 R507‐162‐000 R510‐000‐000
R100, R101 & R102‐164 R501‐000‐012 R507‐164‐000 R510‐000‐000
R100, R101 & R102‐166 R501‐000‐012 R507‐166‐000 R510‐000‐000
R100, R101 & R102‐200 N/A R507‐200‐000 R510‐000‐000
R100, R101 & R102‐202 N/A R507‐202‐000 R510‐000‐000
R100, R101 & R102‐204 N/A R507‐204‐000 R510‐000‐000
R100, R101 & R102‐240 N/A R507‐240‐000 R510‐000‐000

External Feet Inner Panel 2mm, Hinge

For Use With ﴾Set of 2 or 4﴿ Galvanized Steel ﴾Set of 2﴿

Enclosure Types Part No. Part No. Part No.

Data subject to change without notice.

Home Back to Top Contact Us Hammond Direct Login

R100, R101 & R102‐242 N/A R507‐242‐000 R510‐000‐000

R100, R101 & R102‐244 N/A R507‐244‐000 R510‐000‐000

R100, R101 & R102‐320 N/A R507‐320‐000 R510‐000‐000

R100, R101 & R102‐322 N/A R507‐322‐000 R510‐000‐000

R100, R101 & R102‐324 N/A R507‐324‐000 R510‐000‐000

Need Assistance? Contact Us.