140
NOTE
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
CAT.No.2004/2005E(2004.10.1)
ELECTRIC DOUBLE LAYER CAPACITORS “DYNACAP”
DX
Marking color : White print on an indigo sleeve
Series DX
5.5V Miniaturized Standard Capacitors
• Smaller and lighter than Series DB.
• 5mm tall. Max. thin profile(H-shaped).
• Miniaturized but can encase up to 0.33F in 11.5x5mm case.
DX
Outline Drawing
Standard Ratings
Unit: mm
(4.5)
(0.6)
5.0±0.5
15.0 Min.5.0 Min.
L±0.5
D±0.3
Laser welded
Solder plated
lead steel wire
Sleeve
Terminal shaped: L
D±0.3
Terminal shaped: V
Terminal shaped: H
(4.5)
D±0.3
4.0±0.3
5.0±0.3
5.0±0.5
L±0.5
5±0.3 L±0.5
(4.5)
12.4±0.5
10.0±0.5 (0.8)
( 11.5:0.8, 19.0:1.0)
Laser welded
Laser welded
Sleeve
Sleeve
Solder clad stainless steel
Solder clad stainless steel
Specifications
Item Performance
Category temperature range (˚C)
Tolerance at rated capacitance (%)
Internal resistance
at 1 kHz
Characteristics at high
and low temperature
Endurance (70˚C)
Shelf life (70˚C) Test time :
1000 hours ; Same as endurance.
−25 to +70
−20 to +80
Max. operating voltage(V) Rated capacitance(F) ø DxL(mm)ELNA Parts No.
5.5
5.5
5.5
5.5
5.5
DX-5R5V473
DX-5R5H473
DX-5R5L473
DX-5R5V104
DX-5R5H104
DX-5R5L104
DX-5R5V224
DX-5R5H224
DX-5R5L224
DX-5R5V334
DX-5R5H334
DX-5R5L334
DX-5R5V105
11.5x13.0
11.5x 5.0
11.5x12.4
11.5x13.0
11.5x 5.0
11.5x12.4
11.5x13.0
11.5x 5.0
11.5x12.4
11.5x13.0
11.5x 5.0
11.5x12.4
19.0x20.5
0.047
0.1
0.22
0.33
1.0
DB
Miniaturized
Rated Capacitance (F) 0.047 0.1 0.22 0.33 1.0
120 75 75 75 30
Internal resistance (Ω)
Percentage of capacitance change
Internal resistance
Within ±30% of the value at 20
˚C
Less than five times of the value at 20
˚C
Test time
Percentage of capacitance change
Internal resistance
1000 hours
Within ±30% of the initial measured value
Within four times of the initial specified value
Note
Do not apply external force to products or terminals as stress such as twisting,
bending, pushing, or falling of such products or terminals may remove the terminals,
resulting in an open/short circuit or liquid leakage.
Avoid applying excessive heat to capacitors during heating of an adhesive curing oven.
For details, refer to the precautions in use of DYNACAP.
Part numbering system (example: 5.5V0.1F)
Environmental
item
Former item
DX — U or T
Series code
5R5 104
Rated voltage
symbol
Rated capacitance
symbol
Terminal
shaped
DX —
Series code
5R5 104
Rated voltage
symbol
Rated capacitance
symbol
Terminal
shaped
