5130 Power Entry Modules with Line Filter https://www.schurter.com /PG06 IEC Appliance Inlet C20 with Filter, ECO design, front or rear side Mounting Screw-on or rivet mounting from front or rear side Screw-on Version Screw-on mounting from rear side, integrated thread Screw-on Version C20 Snap-in mounting from front side Snap-in version Approvals and Compliances 70 C Description - Panel Mount : Screw-on version from front or rear side, snap-in version from front side - 2 Functions : Appliance Inlet Protection class I , Line filter in standard and medical version - Quick connect terminals Unique Selling Proposition - ECO design Metal flange for optimal shielding Compact design V-Lock cord retaining Characteristics - Optimal shielding due to completely closed filter case, unpotted Suitable for assembly in metal plated plastic housings - Version with class X1 and X2 (standard version) capacitors - Universal line filter for standard applications - Suitable for use in equipment according to IEC/UL 60950 Suitable for use in medical equipment according to IEC/UL 60601-1 Other versions on request - Solder terminals - Medical version M80 - Capacity CX 330 nF References Fits to type: 4790;47950104;0104U;1651;1652;1654;4790;4 795;VAC19KS Alternative: version without line filter 4793;4798 Weblinks pdf datasheet, html-datasheet, General Product Information, DistributorStock-Check, Accessories, Detailed request for product, Microsite Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Impulse Withstand Voltage Allowable Operation Temperature Climatic Category IP-Protection Protection Class Terminal Panel Thickness S Material: Housing 16 A @ Ta 40 C / 250 VAC; 50 Hz 20 A @ Ta 40 C / 250 VAC; 60 Hz standard < 0.5 mA (250 V / 60 Hz) medical < 5 A (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) > 2.5 kV between L-N (CX2) > 4 kV between L-N (CX1) > 5 kV between L/N-PE (Cy2) voltage (1.2/50 s) -25 C to 85 C appliance inlet/-outlet Line Filter MTBF C20 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 C, 16 A, Protection Class I Standard and Medical Version, IEC 60939, UL 1283, CSA C22.2 no. 8 Technical Details > 3'000'000 h acc. to MIL-HB-217 F 25/085/21 acc. to IEC 60068-1 from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Quick connect terminal 6.3 x 0.8 mm Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 0.8 mm to 3 mm (all steps with one variant) Themoplast / steel tin-plated, black / metallic, UL 94V-0 Approvals and Compliances EMC Products 1 5130 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 5130 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 104884 UL Approvals UL UL File Number: E72928 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification 2 EMC Products 5130 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Dimension [mm] Front or rear side mounting for screws with nuts or blind rivets 79.5 12 64 3.5 35 0.10 12 3.6 max.R3 25.9 10.5 30.6 28 4.4 36 27 0.10 50.6 M3 33.9 42 0.15 42 Rear side mounting with pre-formed, threaded holes for M3 screws 79.5 12 64 3.5 36.5 0.1 12 M3 max.R3 25.9 10.5 30.6 28 4.4 36 28.5 0.1 50.6 3.6 33.9 42 0.15 42 Snap-in mounting from front side 79.5 12 64 3.5 35 0.10 12 25.9 10.5 30.6 28 4.4 36 max.R3 27 0.10 39 33.9 EMC Products 3 5130 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Technical Data of Filter-Components Rated Current [A] Filter-Type Inductances L [mH] Capacitance CX [nF] Capacitance CY [nF] R [M] 16 Standard Version 2 x 0.6 100 2.2 1 20 Standard Version 2 x 0.3 100 2.2 1 16 Medical Version (M5) 2 x 0.6 100 - 1 20 Medical Version (M5) 2 x 0.3 100 - 1 Diagrams Standard or medical version (M80) Medical version (M5) L L' L L' L1 1) PE Cx L1 Cy R L2 N Cy PE' 2) 1) PE N' 1) Line 2) Load Cx PE' 2) R L2 N N' 1) Line 2) Load Attenuation Loss - - - - 50 differential mode _____ 50 common mode Standard version 16 A 20 A Medical version (M5) 16 A 20 A All Variants Rated Current IEC [A] Rated Current Filter-Type UL [A] Panel mounting Mounting side Terminal Capacitor V-Lock Order Number 16 16 Standard Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm X2 100nF 5130.2000 16 20 Standard Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm X2 100nF 5130.2001 16 16 Standard Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm X1 100nF 5130.2100 16 20 Standard Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm X1 100nF 5130.2101 16 16 Standard Version Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 mm X2 100nF 5130.0000 16 16 Standard Version Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 mm X2 100nF 4 EMC Products l 5130.0000.21 5130 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Rated Current IEC [A] Rated Current Filter-Type UL [A] Panel mounting Mounting side Terminal Capacitor V-Lock Order Number 16 20 Standard Version Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 mm X2 100nF 5130.0001 16 16 Standard Version Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 mm X1 100nF 5130.0100 16 20 Standard Version Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 mm X1 100nF 5130.0101 16 16 Standard Version Screw Rear Side Quick connect terminals 6.3 x 0.8 mm X2 100nF 5130.1000 16 20 Standard Version Screw Rear Side Quick connect terminals 6.3 x 0.8 mm X2 100nF 5130.1001 16 16 Standard Version Screw Rear Side Quick connect terminals 6.3 x 0.8 mm X1 100nF 5130.1100 16 20 Standard Version Screw Rear Side Quick connect terminals 6.3 x 0.8 mm X1 100nF 5130.1101 16 20 Medical Version (M5) Snap-in Front Side Quick connect terminals X1 100nF 5130.2301 16 16 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm X2 100nF 5130.2200 16 20 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm X2 100nF 5130.2201 16 16 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm X1 100nF 5130.2300 16 16 Medical Version (M5) Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 mm X2 100nF 5130.0200 16 20 Medical Version (M5) Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 mm X2 100nF 5130.0201 16 16 Medical Version (M5) Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 mm X1 100nF 5130.0300 16 16 Medical Version (M5) Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 mm X1 100nF 16 20 Medical Version (M5) Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 mm X1 100nF 5130.0301 16 16 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 mm X2 100nF 5130.1200 16 20 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 mm X2 100nF 5130.1201 16 16 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 mm X1 100nF 5130.1300 16 20 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 mm X1 100nF 5130.1301 l 5130.0300.21 Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Type for screw on mounting from rear side has pre-threaded holes for M3 screws Packaging unit 20 Pcs EMC Products 5 5130 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Accessories Description Wire Harness Wire harness for SCHURTER products Assorted Covers Rear Cover 0859.0047 Cord retaining kits Cord retaining strain relief Flat head, L 4700.0011 Mating Inlets/Plugs Category / Description Connector Overview complete IEC Connector C19, Rewireable, Straight 4795 IEC Connector C19, Rewireable, Angled 4790 Connector further types to 5130 Mating Outlets/Connectors Connector Overview complete IEC Connector C19, Rewireable, Straight 4795 IEC Connector C19, Rewireable, Angled 4790 IEC Connector C19, Rewireable, Straight 0104U Connector further types to 5130 6 EMC Products 5130 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Mating Outlets/Connectors shuttered Power Cord Overview complete Overview Power Cord with IEC Appliance Connector C19, V-Lock, straight VAC19KS 02.12.2017 Power Cord further types to 5130 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. EMC Products 7 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Schurter: 5130.0301 5130.1201 5130.2100 5130.2001 5130.0001 5130.1001 5130.0000 5130.1101 5130.0201 5130.2201 5130.2000 5130.0300 5130.2101 5130.1200 5130.0101 5130.1301 5130.1000 5130.0200 5130.2200 5130.1100 5130.1300 5130.2300 5130.2301 5130.0100 5130.0401 5130.0501 5130.0601 5130.1601 5130.2601 5130.04 5130.05 5130.06 5130.16 5130.26 5130.0400 5130.0500 5130.1600 5130.0600 5130.2600