NLP40-7627 - ARTESYN EMBEDDED TECHNOLOGIES

LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 40-50 W AC/DC Universal Input Switch Mode Power Supplies 1

2 YEAR WARRANTY

NLP40 Series

Single, dual and triple output

•4.25 x 2.5 x 1.15 inch package (1U applications)

•Smallest industry package

•Overvoltage and short circuit protection

•40 W with free air convection

•EN55022, EN55011 conducted emission level B

•EN61000-4-2, -3, -4, -5, -6 immunity compliant

•UL, VDE and CSA safety approvals

•Available RoHS compliant

The NLP40 series is a 40 W universal input ac-dc power supply on a 4.25 x 2.5 inch card

with a maximum component height of 1.15 inches for use in 1U applications. This product is

the smallest standard 40 W package in the industry making the series ideal for

communication applications with space constraints where a standard 5 x 3 inch card

solution is not suitable. The NLP40 provides 40 W of output power with free air convection

cooling which can be boosted to 50 W with 20 CFM of air. Standard features include

overvoltage and short circuit protection. The series, with full international safety approval and

the CE mark, meets conducted noise EN55022 level B and has immunity compliance to

EN61000-4-2,-3,-4, -5, -6. The NLP40 series is designed for use in low power data

networking, computer and telecom applications such as hubs, routers, POS terminals, LCD

projectors, cable modems and PABX’s. This list is not exclusive as the generic feature set of

the NLP40 series with industry standard output configurations provides a solution for most

low power applications including many industrial applications.

All specifications are typical at nominal input, full load at 25 °C unless otherwise stated

GENERAL SPECIFICATIONS

Hold-up time 120 Vac 12 ms @ 40 W

230 Vac 20 ms @ 40 W

Efficiency 75% typical

Isolation voltage Input/output 3000 Vac

Input/chassis 1500 Vac

Switching frequency Fixed 65 kHz, ±5 kHz

Approvals and EN60950, IEC950, UL1950

standards (See Note 8) VDE0805, CSA C22.2 No. 950

Weight 200 g (7.06 oz)

MTBF MIL-HDBK-217F 150,000 hours min.

ENVIRONMENTAL SPECIFICATIONS

Thermal performance Operating ambient, 0 °C to +70 °C

(See Notes 6, 7, 9) (see derating curve)

Non-operating -40 °C to +70 °C

50 °C to 70 °C ambient, Derate to

convection cooled 50% load

0 °C to 50 °C, ambient, 40 W

convection cooled

0 °C to 50 °C ambient, 50 W

20 CFM forced air

Peak (0 °C to +50 °C, 60 s) (See Note 2)

Relative humidity Non-condensing 5% to 95% RH

Altitude Operating 10,000 feet max.

Non-operating 30,000 feet max.

Vibration (See Note 4) 5-500 Hz 2.4 G rms peak

Shock per MIL-STD-810E 516.4 Part IV

OUTPUT SPECIFICATIONS

Total regulation Main output ±2.0%

(Line and load) Auxiliary outputs ±5.0%

Rise time At turn-on 1.0 s, max.

Transient response Main output 5.0% max. dev.,

25% step at 0.1 A/µs 1 ms rec. to 1.0%

Temperature coefficient ±0.02%/°C

Overvoltage protection Main outputs 135%, ±15%

Short circuit protection Cyclic operation Continuous

Minimum output current Single 0 A

Multiple (See Note 5)

INPUT SPECIFICATIONS

Input voltage range Universal input 90-264 Vac

(See Note 9) 120-370 Vdc

Input frequency range 47-440 Hz

Input surge current 120 Vac, cold start 15 A max.

230 Vac, cold start 30 A max.

Safety ground 120 Vac, 60 Hz 0.2 mA

leakage current 230 Vac, 50 Hz 0.4 mA

Input current 120 Vac 1.4 A rms

230 Vac 0.7 A rms

Input fuse UL/IEC127 250 Vac H 3.15 A

EMC CHARACTERISTICS (10)

Conducted emissions EN55022, FCC part 15 level B

Radiated emissions EN55022, FCC part 15 level A

ESD air EN61000-4-2, level 3 Perf. criteria 1

ESD contact EN61000-4-2, level 3 Perf. criteria 1

Surge EN61000-4-5, level 3 Perf. criteria 1

Fast transients EN61000-4-4, level 3 Perf. criteria 1

Radiated immunity EN61000-4-3, level 3 Perf. criteria 1

Conducted immunity EN61000-4-6, level 3 Perf. criteria 1

SPECIFICATIONS

File Name: nlp40.pdf Rev (03): 08 Nov 2005

For the most current data and application support visit www.artesyn.com/powergroup/products.htm

NLP40 Series

Single, dual and triple output

LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 40-50 W AC/DC Universal Input Switch Mode Power Supplies 2

File Name: nlp40.pdf Rev (03): 08 Nov 2005

OUTPUT OUTPUT CURRENT

RIPPLE (3) TOTAL MODEL NUMBER (11,12)

VOLTAGE MAX (1) PEAK (2) FAN (1) REGULATION

+3.3 V (IA)4 A5 A4.5 A 50 mV ±2.0% NLP40-76T366J (5)

+12 V (IB)2 A3 A3 A120 mV ±5.0%

–12 V (IC)0.2 A 1 A 0.5 A 120 mV ±5.0%

+5 V (IA)4 A5 A4.5 A 50 mV ±2.0% NLP40-7608J (5)

+12 V (IB)2 A3 A3 A120 mV ±5.0%

–12 V (IC)0.2 A 1 A 0.5 A 120 mV ±5.0%

+5 V (IA)4 A5 A4.5 A 50 mV ±2.0% NLP40-7610J (5)

+15 V (IB)1.6 A 2 A 2 A 150 mV ±5.0%

–15 V (IC)0.2 A 1 A 0.5 A 150 mV ±5.0%

+12 V (IA)1.8 A 2.2 A 2.1 A 120 mV ±2.0% NLP40-7627J (5)

-12 V (IB)1.8 A 2.2 A 2.1 A 120 mV ±5.0%

+5 V (IA)4 A5 A4.5 A 50 mV ±2.0% NLP40-7629J (5)

+12 V (IB)2 A3 A3 A120 mV ±5.0%

3.3 V (IA)8 A 10 A 9 A 50 mV ±2.0% NLP40-76S3J

5 V 8 A 10 A 9 A 50 mV ±2.0% NLP40-7605J

12 V 3.3 A 4.5 A 4 A 120 mV ±2.0% NLP40-7612J

15 V 2.6 A 3.6 A 3.3 A 150 mV ±2.0% NLP40-7615J

24 V 1.6 A 2.5 A 2 A 240 mV ±2.0% NLP40-7624J

48 V 0.8 A 1.1 A 1 A 300 mV ±2.0% NLP40-7617J

Notes

1Maximum output power is 40 W for natural convection cooling. With

20 CFM fan cooling, the maximum output power is 50 W.

2Peak output current lasting less than 60 seconds with duty cycle less than

5%. During peak loading, output voltage may exceed total reg. limits.

3Figure is peak-to-peak. Output noise measurements are made across a

50 MHz bandwidth using a 12 inch twisted pair, terminated with a 47 µF

capacitor.

4Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G

rms 5 Hz to 500 Hz.

5For multiple output units (except -7627J, 76T366J) to maintain stated

regulation then:

0.25 ≤ IA/ IB≤5, for IB> 0.3 A

0.50 ≤ IA/ IB≤5, for IB< 0.3 A

For maximum output current I(C) on triple output models, i.e. for

IC = IMax., I Amin. ≥ 0.5 A and IA≥I

For NLP40-7627J only, to maintain stated regulation then:

0.5 ≤ IA/ IB≤2.

For NLP40-76T366J only, to maintain stated regulation then:

0.25 ≤ IA/ IB≤4.

6For optimum reliability, no part of the heatsink should exceed 120 °C, and

no semiconductor case temperature should exceed 130 °C.

7CAUTION: Allow a minimum of 1 second after disconnecting line power

when making thermal measurements.

8This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product.

9When the input voltage is <90 Vac the operating range is 0 °C to +40 °C.

10 For system EMI compliance, a ground choke may be required before

connecting the ground wire to the chassis. It is recommended that this

ground choke be placed as close as possible to the systems ac inlet to

eliminate noise pick-up in the system.

11 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.

TSE RoHS 5/6 (non Pb-free) compliant versions may be available on

special request, please contact your local sales representative for details.

12 NOTICE: Some models do not support all options. Please contact your

local Artesyn representative or use the on-line model number search tool at

http://www.artesyn.com/powergroup/products.htm to find a suitable

alternative.

DERATING CURVE

Output Power (Watts)

0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C

20W

40W

50W

20 CFM FORCED AIR COOLING

25W

NATURAL

CONVECTION

COOLING

2005

The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising

from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent

accompany the sale of any such product(s) or information contained herein.

For the most current data and application support visit www.artesyn.com/powergroup/products.htm

NLP40 Series

Single, dual and triple output

LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 40-50 W AC/DC Universal Input Switch Mode Power Supplies 3

www.artesyn.com

File Name: nlp40.pdf Rev (03): 08 Nov 2005

International Safety Standard Approvals

VDE0805/EN60950/IEC950 File 10401-3336-0093

Licence No. 93662

UL1950 File No. E136005

CSA C22.2 No. 950 File No. LR41062C

MAXIMUM COMPONENT

HEIGHT 1.15 (29.21)

TOLERANCE: .xxx ± 0.005"

.xx ± 0.02"

ALL DIMENSIONS IN INCHES (mm)

4.25

(107.95)

4.00

(101.60)

2.25

(57.15)

2.50

(63.50)

Mounting

Hole Diameter

0.138 (3.50) Typical

0.125

(3.175)

Input and output connectors

AC (J1) connector type

Molex 26-60-4030 type.

DC (J2) connector type

Molex 26-60-4060 type.

Mating connectors

AC (J1) mating connector type

Molex 09-50-3031 or equivalent with Molex 08-50-0105 or equivalent crimp

terminals.

DC (J2) mating connector type

Molex 09-50-3061 with Triurcon 6838 or equivalent crimp terminals.

Note: The input and output connectors are the same as

those used on NFS40, NFN40, NAL40 and NAN40.

INPUT

PIN CONNECTIONS

Pin 1 AC Line

Pin 2 No Pin

Pin 3 AC Neutral

Pin 1 Safety Ground

OUTPUT PIN CONNECTIONS

J2 SINGLE DUAL TRIPLE

Pin 1 +Vout V (B) V (B)

Pin 2 +Vout V (A) V (A)

Pin 3 +Vout V (A) V (A)

Pin 4 Return Return Return

Pin 5 Return Return Return

Pin 6 Return Return V (C)