REVISIONS PART NO. 2261(5561) - Series 2261(5561)S ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE - A RELEASED Veena 09/9/08 Suresh 09/9/08 Farnell 23/9/08 Specifications: Current rating Voltage rating Maximum contact resistance Minimum insulation resistance Withstanding voltage Operating temperature range Material and Finish: Wafer insulator Contact pin : : : : : : 5.0A ac/dc. 250V ac/dc. 10m. 1000M. 1500V ac for one minute. -25C to +105C. : Nylon 46. : Copper alloy tin plated. Recommended PCB Layout Dimensions : Millimetres This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC MULTICOMP is the registered trademark of the Group. (c) Premier Farnell plc 2008. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. DRAWING TITLE: DRAWN BY: Veena DATE: 09/09/08 CHECKED BY: DATE: 09/09/08 SIZE DATE: 23/09/08 SCALE: NTS Suresh APPROVED BY: Farnell Header - Vertical and Right Angle A DWG NO. M10001663 ELECTRONIC FILE 1578584-1578605_DWG U.O.M.: mm SHEET: 1 OF REV A 4 REVISIONS PART NO. 2261(5561) - Series ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE - A RELEASED Veena 09/9/08 Suresh 09/9/08 Farnell 23/9/08 2261(5561)R Recommended PCB Layout 2 Pin 4 Pin 6 Pin Dimensions : Millimetres This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC MULTICOMP is the registered trademark of the Group. (c) Premier Farnell plc 2008. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. DRAWING TITLE: DRAWN BY: Veena DATE: 09/09/08 CHECKED BY: DATE: 09/09/08 SIZE DATE: 23/09/08 SCALE: NTS Suresh APPROVED BY: Farnell Header - Vertical and Right Angle A DWG NO. M10001663 ELECTRONIC FILE 1578584-1578605_DWG U.O.M.: mm SHEET: 2 OF REV A 4 REVISIONS PART NO. 2261(5561) - Series ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE - A RELEASED Veena 09/9/08 Suresh 09/9/08 Farnell 23/9/08 Engineering Dimension Number of Position A B Part Number 2 6.70 - 2261(5561)S-02 4 9.70 3.00 2261(5561)S-04 6 12.70 6.00 2261(5561)S-06 8 15.70 9.00 2261(5561)S-08 10 18.70 12.00 2261(5561)S-10 12 21.70 15.00 2261(5561)S-12 14 24.70 18.00 2261(5561)S-14 16 27.70 21.00 2261(5561)S-16 18 30.70 24.00 2261(5561)S-18 20 33.70 27.00 2261(5561)S-20 2 6.70 - 2261(5561)R-02 4 9.70 3.00 2261(5561)R-04 6 12.70 6.00 2261(5561)R-06 8 15.70 9.00 2261(5561)R-08 10 18.70 12.00 2261(5561)R-10 12 21.70 15.00 2261(5561)R-12 14 24.70 18.00 2261(5561)R-14 16 27.70 21.00 2261(5561)R-16 18 30.70 24.00 2261(5561)R-18 20 33.70 27.00 2261(5561)R-20 Dimensions : Millimetres This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC MULTICOMP is the registered trademark of the Group. (c) Premier Farnell plc 2008. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. DRAWING TITLE: DRAWN BY: Veena DATE: 09/09/08 CHECKED BY: DATE: 09/09/08 SIZE DATE: 23/09/08 SCALE: NTS Suresh APPROVED BY: Farnell Header - Vertical and Right Angle A DWG NO. M10001663 ELECTRONIC FILE 1578584-1578605_DWG U.O.M.: mm SHEET: 3 OF REV A 4 REVISIONS PART NO. 2261(5561) - Series ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE - A RELEASED Veena 09/9/08 Suresh 09/9/08 Farnell 23/9/08 Part Number Explanation: 2261(5561) S - Type Number of Positions Type 02 Number of Positions : 02 = 2, 04 = 4, 06 = 6, 08 = 8, 10, 12, 14, 16, 18 and 20 Positions. : S = Straight type, R = Right Angle Type. http://www.farnell.com http://www.newark.com http://www.cpc.co.uk This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC MULTICOMP is the registered trademark of the Group. (c) Premier Farnell plc 2008. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. DRAWING TITLE: DRAWN BY: Veena DATE: 09/09/08 CHECKED BY: DATE: 09/09/08 SIZE DATE: 23/09/08 SCALE: NTS Suresh APPROVED BY: Farnell Header - Vertical and Right Angle A DWG NO. M10001663 ELECTRONIC FILE 1578584-1578605_DWG U.O.M.: mm SHEET: 4 OF REV A 4