PART NO.
ECN # REV
-A
REVISIONS
DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD
Veena 09/9/08 09/9/08 23/9/08Suresh Farnell
RELEASED
2261(5561) - Series
This data sheet and its contents (the "Information") belong to the Premier Farnell Group
(the "Group") or are licensed to it. No licence is granted for the use of it other than for
information purposes in connection with the products to which it relates. No licence
of any intellectual property rights is granted. The Information is subject to change with-
out notice and replaces all data sheets previously supplied. The Information supplied is
believed to be accurate but the Group assumes no responsibility for its accuracy or
completeness, any error in or omission from it or for any use made of it. Users of this
data sheet should check for themselves the Information and the suitability of the prod-
ucts for their purpose and not make any assumptions based on information included or
omitted. Liability for loss or damage resulting from any reliance on the Information or
use of it (including liability resulting from negligence or where the Group was aware of
the possibility of such loss or damage arising) is excluded. This will not operate to limit
or restrict the Group's liability for death or personal injury resulting from its negligence.
SPC MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2008.
TOLERANCES: DRAWN BY:
Veena
Suresh
Farnell
CHECKED BY:
APPROVED BY:
DATE: DRAWING TITLE:
Header - Vertical and Right Angle
1578584-1578605_DWG
M10001663
09/09/08
DATE: SIZE
SCALE: NTS U.O.M.: mm SHEET: 1 OF 4
DWG NO. ELECTRONIC FILE REV
A
09/09/08 A
DATE:
23/09/08
UNLESS OTHERWISE
SPECIFIED,
DIMENSIONS ARE
FOR REFERENCE
PURPOSES ONLY.
Specifications:
Current rating : 5.0A ac/dc.
Voltage rating : 250V ac/dc.
Maximum contact resistance : 10m.
Minimum insulation resistance : 1000M.
Withstanding voltage : 1500V ac for one minute.
Operating temperature range : -25°C to +105°C.
Material and Finish:
Wafer insulator : Nylon 46.
Contact pin : Copper alloy tin plated.
Recommended PCB Layout
Dimensions : Millimetres
2261(5561)S
PART NO.
ECN # REV
-A
REVISIONS
DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD
Veena 09/9/08 09/9/08 23/9/08Suresh Farnell
RELEASED
2261(5561) - Series
This data sheet and its contents (the "Information") belong to the Premier Farnell Group
(the "Group") or are licensed to it. No licence is granted for the use of it other than for
information purposes in connection with the products to which it relates. No licence
of any intellectual property rights is granted. The Information is subject to change with-
out notice and replaces all data sheets previously supplied. The Information supplied is
believed to be accurate but the Group assumes no responsibility for its accuracy or
completeness, any error in or omission from it or for any use made of it. Users of this
data sheet should check for themselves the Information and the suitability of the prod-
ucts for their purpose and not make any assumptions based on information included or
omitted. Liability for loss or damage resulting from any reliance on the Information or
use of it (including liability resulting from negligence or where the Group was aware of
the possibility of such loss or damage arising) is excluded. This will not operate to limit
or restrict the Group's liability for death or personal injury resulting from its negligence.
SPC MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2008.
TOLERANCES: DRAWN BY:
Veena
Suresh
Farnell
CHECKED BY:
APPROVED BY:
DATE: DRAWING TITLE:
Header - Vertical and Right Angle
1578584-1578605_DWG
M10001663
09/09/08
DATE: SIZE
SCALE: NTS U.O.M.: mm SHEET: 2 OF 4
DWG NO. ELECTRONIC FILE REV
A
09/09/08 A
DATE:
23/09/08
UNLESS OTHERWISE
SPECIFIED,
DIMENSIONS ARE
FOR REFERENCE
PURPOSES ONLY.
Recommended PCB Layout
Dimensions : Millimetres
2 Pin 4 Pin 6 Pin
2261(5561)R
PART NO.
ECN # REV
-A
REVISIONS
DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD
Veena 09/9/08 09/9/08 23/9/08Suresh Farnell
RELEASED
2261(5561) - Series
This data sheet and its contents (the "Information") belong to the Premier Farnell Group
(the "Group") or are licensed to it. No licence is granted for the use of it other than for
information purposes in connection with the products to which it relates. No licence
of any intellectual property rights is granted. The Information is subject to change with-
out notice and replaces all data sheets previously supplied. The Information supplied is
believed to be accurate but the Group assumes no responsibility for its accuracy or
completeness, any error in or omission from it or for any use made of it. Users of this
data sheet should check for themselves the Information and the suitability of the prod-
ucts for their purpose and not make any assumptions based on information included or
omitted. Liability for loss or damage resulting from any reliance on the Information or
use of it (including liability resulting from negligence or where the Group was aware of
the possibility of such loss or damage arising) is excluded. This will not operate to limit
or restrict the Group's liability for death or personal injury resulting from its negligence.
SPC MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2008.
TOLERANCES: DRAWN BY:
Veena
Suresh
Farnell
CHECKED BY:
APPROVED BY:
DATE: DRAWING TITLE:
Header - Vertical and Right Angle
1578584-1578605_DWG
M10001663
09/09/08
DATE: SIZE
SCALE: NTS U.O.M.: mm SHEET: 3 OF 4
DWG NO. ELECTRONIC FILE REV
A
09/09/08 A
DATE:
23/09/08
UNLESS OTHERWISE
SPECIFIED,
DIMENSIONS ARE
FOR REFERENCE
PURPOSES ONLY.
Engineering Dimension
Number of Position A B Part Number
2 6.70 - 2261(5561)S-02
4 9.70 3.00 2261(5561)S-04
6 12.70 6.00 2261(5561)S-06
8 15.70 9.00 2261(5561)S-08
10 18.70 12.00 2261(5561)S-10
12 21.70 15.00 2261(5561)S-12
14 24.70 18.00 2261(5561)S-14
16 27.70 21.00 2261(5561)S-16
18 30.70 24.00 2261(5561)S-18
20 33.70 27.00 2261(5561)S-20
2 6.70 - 2261(5561)R-02
4 9.70 3.00 2261(5561)R-04
6 12.70 6.00 2261(5561)R-06
8 15.70 9.00 2261(5561)R-08
10 18.70 12.00 2261(5561)R-10
12 21.70 15.00 2261(5561)R-12
14 24.70 18.00 2261(5561)R-14
16 27.70 21.00 2261(5561)R-16
18 30.70 24.00 2261(5561)R-18
20 33.70 27.00 2261(5561)R-20
Dimensions : Millimetres
PART NO.
ECN # REV
-A
REVISIONS
DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD
Veena 09/9/08 09/9/08 23/9/08Suresh Farnell
RELEASED
2261(5561) - Series
This data sheet and its contents (the "Information") belong to the Premier Farnell Group
(the "Group") or are licensed to it. No licence is granted for the use of it other than for
information purposes in connection with the products to which it relates. No licence
of any intellectual property rights is granted. The Information is subject to change with-
out notice and replaces all data sheets previously supplied. The Information supplied is
believed to be accurate but the Group assumes no responsibility for its accuracy or
completeness, any error in or omission from it or for any use made of it. Users of this
data sheet should check for themselves the Information and the suitability of the prod-
ucts for their purpose and not make any assumptions based on information included or
omitted. Liability for loss or damage resulting from any reliance on the Information or
use of it (including liability resulting from negligence or where the Group was aware of
the possibility of such loss or damage arising) is excluded. This will not operate to limit
or restrict the Group's liability for death or personal injury resulting from its negligence.
SPC MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2008.
TOLERANCES: DRAWN BY:
Veena
Suresh
Farnell
CHECKED BY:
APPROVED BY:
DATE: DRAWING TITLE:
Header - Vertical and Right Angle
1578584-1578605_DWG
M10001663
09/09/08
DATE: SIZE
SCALE: NTS U.O.M.: mm SHEET: 4 OF 4
DWG NO. ELECTRONIC FILE REV
A
09/09/08 A
DATE:
23/09/08
UNLESS OTHERWISE
SPECIFIED,
DIMENSIONS ARE
FOR REFERENCE
PURPOSES ONLY.
Number of Positions : 02 = 2, 04 = 4, 06 = 6, 08 = 8, 10, 12, 14, 16, 18 and 20 Positions.
Type : S = Straight type, R = Right Angle Type.
Number of Positions
02
Type
S-
2261(5561)
Part Number Explanation:
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk