External Iridium Antenna AEARBD040038-S1621 Pb Features Applications * Iridium 1616 - 1626.5 MHz * Low VSWR of 1.5 * RHCP polarization * Easy to install * Magnetic mounting ** Iridium applications ** IoT ** Handheld devices ** Satellite telephony ** Tracking ** Fleet and asset monitoring 40.5 x 38.0 x 12.3 mm RoHS/RoHS II Compliant MSL = N/A Electrical Specifications Parameters Min. Typ. Max. Units Frequency Range 1616 ~ 1626.5 MHz Center Frequency Bandwidth 1621.25 5.25 MHz MHz 15 VSWR 1.5 Polarization @ CF Right Hand Circular Polarization RHCP Impedance Gain Cable Length and Connector 50 0.46 Note dBi @ 1621 MHZ RG174/ 1.2M/ SMA Environmental Characteristics Parameters Termination Operating Temperature Storage Temperature Feed Pin Temperature Relative Humidity LLC Description Ag (Pb free) -30C to +80C -40C to +105C +290C for 3 sec 40 ~ 95 % 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 01.25.2019 ISO9001-2015 CERTIFIED External Iridium Antenna AEARBD040038-S1621 Pb 40.5 x 38.0 x 12.3 mm RoHS/RoHS II Compliant MSL = N/A Dimensions Unit: mm Return Loss LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 01.25.2019 ISO9001-2015 CERTIFIED External Iridium Antenna AEARBD040038-S1621 Pb 40.5 x 38.0 x 12.3 mm RoHS/RoHS II Compliant MSL = N/A SWR LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 01.25.2019 ISO9001-2015 CERTIFIED External Iridium Antenna AEARBD040038-S1621 Pb 40.5 x 38.0 x 12.3 mm RoHS/RoHS II Compliant MSL = N/A Impedance Characteristics LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 01.25.2019 ISO9001-2015 CERTIFIED External Iridium Antenna AEARBD040038-S1621 Pb 40.5 x 38.0 x 12.3 mm RoHS/RoHS II Compliant MSL = N/A Return Loss and Impedance Characteristics (as measured on the test fixture) LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 01.25.2019 ISO9001-2015 CERTIFIED External Iridium Antenna AEARBD040038-S1621 Pb 40.5 x 38.0 x 12.3 mm RoHS/RoHS II Compliant MSL = N/A Radiation Pattern: 2D- Pattern 1621 MHz XZ YZ Peak Gain 0.46 0.39 Zenith Gain (dBi) -1.17 -1.16 Packaging The casing is of dimension 370.0 x 370.0 x 300.0 mm and contains 100 units in each. LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 01.25.2019 ISO9001-2015 CERTIFIED External Iridium Antenna AEARBD040038-S1621 Pb 40.5 x 38.0 x 12.3 mm RoHS/RoHS II Compliant MSL = N/A Reliability Tests i. Low-temperature test: Expose the specimen to -40C for 400 hours and then to normal temperature/ humidity for 24 hours or more. After this test, examine its appearance and functions. ii. High-temperature test: Expose the specimen to +105C for 400 hours and then to normal temperature/humidity for 24 hours or more. After this test, examine its appearance and functions. iii. High-temperature/ High-humidity test: Subject the object to the environmental conditions of +60C and 90 - 95 % R.H. for 96 hours, then expose to normal temperature/ humidity for 24 hours or more. After this test, examine its appearance and functions. iv. Thermal shock test: Subject the object to cyclic temperature change (-40C, 2 hours +85 C, 2 hours) for 100 cycles, then expose to normal temperature/humidity for 24 hours or more. After this test, examine its appearance and functions. v. Vibration test: * Sinusoidal vibration test: Subject the object to vibrations of 5 to 200 to 5 Hz swept in 10 minutes, 4.5 G at maximum (2 mm amplitude), in X and Y directions for two hours each and in Z direction for four hours. After this test, examine its appearance functions. * Vibration test in packaged condition: Subject the object, which is packaged as illustrated, to vibrations of 15 to 60 to 15 Hz swept in 6 minutes, 4 G at maximum (2 mm amplitude at maximum), applied in X, Y and Z directions for two hours each, i.e. six hours in total. After this test, examine its appearance and functions. vi. Free fall test in packaged condition: Drop the object, which is packaged as illustrated, to a concrete surface from the height of 90 cm, on one comer, three edges and six faces once each, i.e. 10 times in total. After this test, examine its appearance and functions. vii. Soldering heat resistance test: The lead pins of the unit are soaked in solder bath at 260C 5C for 10 seconds. After this test, examine its appearance and functions. viii.Adhesion test: The device is subjected to be soldered on test PCB. Then apply 0.5 Kg (5 N) of force for 51 seconds in the direction parallel to the substrate. (The soldering should be done by reflow and be conducted with care so that the soldering is uniform and free of defect by stress such as heat shock). ATTENTION: Abracon LLC's products are COTS - Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon's products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information. LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 01.25.2019 ISO9001-2015 CERTIFIED