IL256AT Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input, with Base Connection FEATURES A/C 1 8 NC C/A 2 7 B NC 3 6 C NC 4 5 E i179025 DESCRIPTION The IL256AT is an AC input phototransistor optocoupler. The device consists of two infrared emitters connected in reverse parallel and coupled to a silicon NPN phototransistor detector. These circuit elements are constructed with a standard SOIC-8 foot print. The product is well suited for telecom applications such as ring detection or off/on hook status, given its bidirectional LED input and guaranteed current transfer ratio (CTR) minimum of 20 % at IF = 10 mA. * Guaranteed CTR symmetry, 2:1 maximum * Bidirectional AC input industry standard SOIC-8 Surface mountable package * Isolation test voltage, 4000 VRMS * Standard lead spacing, 0.05" * Available only on tape and reel (conform to EIA standard RS481A) * Lead (Pb)-free component * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC APPLICATIONS * Telecom applications ring detection AGENCY APPROVALS * UL1577, file no. E52744 system code Y * CUL - file no. E52744, equivalent to CSA bulletin 5A * DIN EN 60747-5-2 (VDE 0884) available with option 1 ORDER INFORMATION PART REMARKS IL256AT CTR > 20 %, tape and reel, SOIC-8 ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITION SYMBOL VALUE UNIT IF 60 mA Pdiss 90 mW 0.8 mW/C INPUT Forward continuous current Power dissipation Derate linearly from 25 C OUTPUT Collector-emitter breakdown voltage BVCEO 30 V Emitter-collector breakdown voltage BVECO 5 V Collector-base breakdown voltage BVCBO 70 V Pdiss 150 mW 2.0 mW/C Power dissipation Derate linearly from 25 C COUPLER Isolation voltage, input to output VISO 4000 VRMS Total package dissipation (LED and detector) Ptot 240 mW 3.2 mW/C Storage temperature Tstg - 55 to + 150 C Operating temperature Tamb - 55 to + 100 C 10 s Derate linearly from 25 C Soldering time at 260 C Note Tamb = 25 C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. Document Number: 83620 Rev. 1.8, 08-Jan-08 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 1 IL256AT Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input, with Base Connection ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL IF = 10 mA VF MIN. TYP. MAX. UNIT 1.2 1.5 V INPUT Forward voltage OUTPUT Collector emitter breakdown voltage IC = 1.0 mA BVCEO 30 50 V Emitter collector breakdown voltage IE = 100 A BVECO 5 10 V Collector base breakdown voltage IC = 100 A BVCBO 70 90 Collector emitter leakage current VCE = 10 V ICEO IF = 16 mA, IC = 2 mA VCEsat V 5 50 nA 0.4 V COUPLER Saturation voltage, collector emitter Note Tamb = 25 C, unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO PARAMETER DC current transfer ratio TEST CONDITION SYMBOL MIN. IF = 10 mA, VCE = 5 V CTRDC 20 Symmetry (CTR at + 10 mA)/(CTR at -10 mA) 0.5 TYP. MAX. UNIT % 1 2 TYP. MAX. SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL MIN. Climatic classification (according to IEC 68 part 1) UNIT 55/100/21 Comparative tracking index CTI 175 VIOTM 6000 VIORM 560 399 V V PSO 350 mW ISI 150 mA TSI 165 Creepage distance Clearance distance Insulation thickness, reinforced rated per IEC 60950 2.10.5.1 C 4 mm 4 mm 0.2 mm Note As per IEC 60747-5-2, 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of prodective circuits. www.vishay.com 2 For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83620 Rev. 1.8, 08-Jan-08 IL256AT Optocoupler, Phototransistor Output, Vishay Semiconductors AC Input, with Base Connection TYPICAL CHARACTERISTICS Tamb = 25 C, unless otherwise specified 2.0 40 85 C 25 C 0 - 55 C - 20 1.0 0.5 - 40 - 60 - 1.5 - 1.0 - 0.5 0.0 0.5 1.0 0.0 0.1 1.5 V F - LED Forward Voltage (V) iil256at_01 iil256at_04 Fig. 1 - LED Forward Current vs.Forward Voltage 0.8 TA = - 55 C Normalized CTR 1.2 TA = 25 C 1.1 1.0 0.9 TA = 100 C 0.1 1 iil256at_02 0.6 10 iil256at_05 Fig. 2 - Forward Voltage vs. Forward Current Normalized CTRCB 0.005 0.01 0.02 0.05 0.1 0.2 0.5 100 t DF = /t 100 10 - 1 10 0 10 1 1.0 TA = 25 C TA = 50 C TA = 70 C 0.5 0.0 0.1 t - LED Pulse Duration (s) 1 10 100 I F - LED Current (mA) iil256at_06 Fig. 3 - Peak LED Current vs. Duty Factor, Tau Document Number: 83620 Rev. 1.8, 08-Jan-08 10 Normalized to: I F = 10 mA 1000 10 - 3 10 - 2 1 IF - LED Current (mA) 1.5 Duty Factor 10 - 4 Normalized to: IF = 10 mA, VCE = 10 V TA = 25 C Fig. 5 - Normalized Saturated CTR 10 10 - 6 10 - 5 VCE(sat) = 0.4 V 0.4 0.0 0.1 100 IF - Forward Current (mA) 10000 TA = 25 C TA = 50 C TA = 70 C TA = 100 C 0.2 0.8 0.7 If(pk) - Peak LED Current (mA) 100 1.0 1.3 iil256at_03 1 10 IF - LED Current (mA) Fig. 4 - Normalized CTR vs. IF and Tamb 1.4 VF - Forward Voltage (V) Normalized to: IF = 10 mA, VCE = 10 V TA = 25 C TA = 25 C TA = 50 C TA = 70 C TA = 100 C 1.5 20 Normalized CTR I F - LED Forward Current (mA) 60 Fig. 6 - Normalized CTRcb For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 3 IL256AT Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input, with Base Connection 1.5 1000 Normalized Saturated HF ICB - Photocurrent (A) 25 C 100 70 C 10 1 0.1 Normalized to: HFE at VCE = 10 V ICB = 10 A 1.0 TA TA TA TA 0.5 = - 20 C = 25 C = 50 C = 70 C V CE(sat) = 0.4 V 0.0 0.1 1 10 100 1 IF - LED Current (mA) iil256at_07 10 100 1000 IB - Base Current (A) iil256at_10 Fig. 10 - Normalized Saturated hFE vs. Base Current Fig. 7 - Photocurrent vs. LED Current 700 1000 100 V CE = 0.4 V 100 10 400 300 1 200 100 1 IB iil256at_08 10 100 - Base Current (A) IB - Base Current (A) 500 IF - LED Current (mA) HFE - Transistor Gain 600 0.1 1000 10 1 0.1 0.01 0.001 0.4 0.5 Fig. 8 - Base Current vs. IF and hFE 0.7 0.8 Fig. 11 - Base Emitter Voltage vs. Base Current 10 5 1.2 NHFE - 20 C NHFE 25 C NHFE 50 C NHFE 70 C 0.8 0.6 0.4 1 iil256at_09 10 100 10 3 10 2 V CE = 10 V 10 1 Typical 10 0 10 -1 10 -2 - 20 1000 IB - Base Current (A) 0 20 40 60 80 100 T A - Ambient Temperature (C) iil256at_12 Fig. 9 - Normalized hFE vs. Base Current and Temp. www.vishay.com 4 10 4 ICEO - Collector Emitter (nA) Normalized to: IB = 10 A VCE = 10 1.0 Normalized HFE 0.6 VBE - Base Emitter Voltage (V) iil256at_11 Fig. 12 - Collector-Emitter Leakage Current vs.Temp. For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83620 Rev. 1.8, 08-Jan-08 IL256AT Optocoupler, Phototransistor Output, Vishay Semiconductors AC Input, with Base Connection PACKAGE DIMENSIONS in inches (millimeters) 0.120 0.002 (3.05 0.05) R 0.010 (0.13) 0.050 (1.27) CL 0.240 (6.10) 0.014 (0.36) 0.154 0.002 (3.91 0.05) 0.036 (0.91) 0.170 (4.32) 0.260 (6.6) 0.045 (1.14) 0.016 (0.41) Pin one I.D. 7 0.015 0.002 0.230 0.002 40 (0.38 0.05) 0.0585 0.002 (1.49 0.05) (5.84 0.05) ISO method A 0.004 (0.10) 0.125 0.002 0.008 (0.20) 0.008 (0.20) 5 max. R0.010 0.050 (1.27) typ. 0.040 (1.02) 0.020 0.004 (0.25) max. (0.51 0.10) i178020 Document Number: 83620 Rev. 1.8, 08-Jan-08 (3.18 0.05) Lead coplanarity 0.001 max. 2 plcs. For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 5 IL256AT Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input, with Base Connection OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA. 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 6 For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83620 Rev. 1.8, 08-Jan-08 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000