PS2561FL-1Y-A - Renesas Electronics

R08DS0033EJ0100 Rev.1.00 Page 1 of 13

Jan 06, 2012

The mark <R> shows major revised points.

The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.

Preliminary Data Sheet

PS2561F-1,PS2561FL-1

DIP PHOTOCOUPLER, OPERATING AMBIENT TEMPERATURE 110°C

DESCRIPTION

The PS2561F-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon

phototransistor.

The PS2561F-1 is in a plastic DIP (Dual In-line Package) and the PS2561FL-1 is lead bending type (Gull-wing) for

surface mount.

FEATURES

• Operating ambient temperature: 110°C

• High Isolation voltage (BV = 5 000 Vr.m.s.)

• High collector to emitter voltage (VCEO = 80 V)

• High current transfer ratio (CTR = 450% TYP.)

• High-speed switching (tr = 5

s TYP., tf = 7

s TYP.)

• Embossed tape product: PS2561FL-1-F3 : 2 000 pcs/reel

• Pb-Free product

• Safety standard

• UL approved: No. E72422

APPLICATIONS

• Power meter

• Telephone/FAX.

• FA/OA equipment

• Programmable logic controller

R08DS0033EJ0100

Rev.1.00

Jan 06, 2012

1. Anode

2. Cathode

3. Emitter

4. Collector

PIN CONNECTION

(Top View)

<R>

PS2561F-1,PS2561FL-1 Chapter Title

R08DS0033EJ0100 Rev.1.00 Page 2 of 13

Jan 06, 2012

PACKAGE DIMENSIONS (UNIT: mm)

DIP Type

PS2561F-1

3.5±0.3

4.15±0.43.2±0.4

2.54

1.25±0.15

0.50±0.10

0.25

4.6±0.35

6.5±0.5

0 to 15°

7.62

0.25

+0.1

–0.05

Lead Bending Type

PS2561FL-1

0.25

4.6±0.35

6.5±0.5

3.5±0.3

2.54

1.25±0.15 0.9±0.25

9.60±0.4

0.25

+0.1

–0.05

0.1

+0.1

–0.05

0.15

PHOTOCOUPLER CONSTRUCTION

Parameter PS2561F-1, PS2561FL-1

Air Distance (MIN.) 7 mm

Outer Creepage Distance (MIN.) 7 mm

Inner Creepage Distance (MIN.) 4 mm

Isolation Distance (MIN.) 0.4 mm

<R>

PS2561F-1,PS2561FL-1 Chapter Title

R08DS0033EJ0100 Rev.1.00 Page 3 of 13

Jan 06, 2012

MARKING EXAMPLE

Type Number

Assembly Lot

Company Initial

2561F

KR131

Week Assembled

Year Assembled

(Last 1 Digit)

In-house Code

CTR Rank Code

No. 1 pin

Mark

K131

Package

New PKG

Made in TaiwanMade in Japan

Pb-Free and

Halogen Free

ORDERING INFORMATION

Part Number Order Number Solder Plating

Specification

Packing Style Safety Standard

Approval

Application

Part Number*1

PS2561F-1 PS2561F-1Y-A Pb-Free and Magazine case 100 pcs Standard PS2561F-1

PS2561FL-1 PS2561FL-1Y-A Halogen Free products PS2561FL-1

PS2561FL-1-F3 PS2561FL-1Y-F3-A Embossed Tape (UL approved)

2 000 pcs/reel

Note: *1. For the application of the Safety Standard, following part number should be used.

<R>

PS2561F-1,PS2561FL-1 Chapter Title

R08DS0033EJ0100 Rev.1.00 Page 4 of 13

Jan 06, 2012

ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)

Parameter Symbol Ratings Unit

Diode Reverse Voltage VR 6 V

Forward Current (DC) IF 30 mA

Power Dissipation Derating

PD/°C 1.5 mW/°C

Power Dissipation PD 150 mW

Peak Forward Current*1 I

FP 1 A

Transistor Collector to Emitter Voltage VCEO 80 V

Emitter to Collector Voltage VECO 7 V

Collector Current IC 50 mA

Power Dissipation Derating

PC/°C 1.5 mW/°C

Power Dissipation PC 150 mW

Isolation Voltage *2 BV 5 000 Vr.m.s.

Operating Ambient Temperature TA −55 to +110 °C

Storage Temperature Tstg −55 to +150 °C

Notes: *1. PW = 100

s, Duty Cycle = 1%

*2. AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.

Pins 1-2 shorted together, 3-4 shorted together.

PS2561F-1,PS2561FL-1 Chapter Title

R08DS0033EJ0100 Rev.1.00 Page 5 of 13

Jan 06, 2012

ELECTRICAL CHARACTERISTICS (TA = 25°C)

Parameter Symbol Conditions MIN. TYP. MAX. Unit

Diode Forward Voltage VF I

F = 10 mA 1.2 1.4 V

Reverse Current IR V

R = 5 V 5

Terminal Capacitance Ct V = 0 V, f = 1.0 MHz 10 pF

Transistor Collector to Emitter Dark

Current

ICEO I

F = 0 mA, VCE = 80 V 100 nA

IF = 5 mA, VCE = 5 V 300 450 600 % Coupled Current Transfer Ratio

(IC/IF)*1

CTR

IF = 1 mA, VCE = 5 V 60

Collector Saturation

Voltage

VCE (sat) I

F = 10 mA, IC = 2 mA 0.3 V

Isolation Resistance RI-O V

I-O = 1.0 kVDC 1011 Ω

Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz 0.5 pF

Rise Time*2 t

r V

CC = 10 V, IC = 2 mA, 5 18

Fall Time*2 t

f R

L = 100 Ω 7 18

Notes: *1. CTR rank

CTR Rank CTR (%) Conditions

300 to 600 IF = 5 mA, VCE = 5 V

K 60 and larger IF = 1 mA, VCE = 5 V

*2. Test circuit for switching time

OUT

= 100 Ω

50 Ω

Pulse Input

PW = 100 s

Duty Cycle = 1/10

Input

Output

90%

10%

off

PS2561F-1,PS2561FL-1 Chapter Title

R08DS0033EJ0100 Rev.1.00 Page 6 of 13

Jan 06, 2012

TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)

Collector to Emitter Dark Current ICEO (nA)

Ambient Temperature TA (°C)

COLLECTOR TO EMITTER DARK

CURRENT vs. AMBIENT TEMPERATURE

Collector Current IC (mA)

Collector to Emitter Voltage VCE (V)

COLLECTOR CURRENT vs.

COLLECTOR TO EMITTER VOLTAGE

Collector Saturation Voltage VCE (sat) (V)

COLLECTOR CURRENT vs.

COLLECTOR SATURATION VOLTAGE

Collector Current IC (mA)

Diode Power Dissipation PD (mW)

Transistor Power Dissipation PC (mW)

Ambient Temperature TA (°C)

Forward Current IF (mA)

Forward Voltage VF (V)

Ambient Temperature TA (°C)

DIODE POWER DISSIPATION vs.

AMBIENT TEMPERATURE

TRANSISTOR POWER DISSIPATION

vs. AMBIENT TEMPERATURE

FORWARD CURRENT vs.

FORWARD VOLTAGE

100

100 000

10 000

1 000

100

17550250−25−50

= 80 V

5 V

10 V

24 V

48 V

0.1

100

0 0.2 0.4 0.6 0.8

1.0

1 mA

2 mA

5 mA

IF = 10 mA

00246810

3 mA

4 mA

2 mA

1 mA

IF = 5 mA

150

100

0 25 50 75 100

110

125 150

1.5 mW/°C

150

100

25 50 75 100

110

125 1500

1.5 mW/°C

100

1.51.41.31.21.11.00.90.80.7

0.5

0.1

0°C

–25°C

–55°C

+60°C

+25°C

TA = +100°C

Remark The graphs indicate nominal characteristics.

<R>

PS2561F-1,PS2561FL-1 Chapter Title

R08DS0033EJ0100 Rev.1.00 Page 7 of 13

Jan 06, 2012

Ambient Temperature TA (°C)

Normalized Current Transfer Ratio CTR

NORMALIZED CURRENT TRANSFER

RATIO vs. AMBIENT TEMPERATURE

Load Resistance RL (Ω)

Switching Time t ( s)

SWITCHING TIME vs.

LOAD RESISTANCE

Frequency f (kHz)

Normalized Gain GV (dB)

FREQUENCY RESPONSE

Load Resistance RL (kΩ)

SWITCHING TIME vs.

LOAD RESISTANCE

Switching Time t ( s)

Forward Current IF (mA)

Current Transfer Ratio CTR (%)

CURRENT TRANSFER RATIO vs.

FORWARD CURRENT

Normalized to 1.0

at TA = 25°C,

IF = 5 mA, VCE = 5 V

100

200

300

400

500

600

0.01 0.1 1 10

100

Sample A

0.1

100

10 100 1 000 10 000

IC = 2 mA, VCC = 10 V,

CTR = 430%

0.1

1 000

100

0.1 1 10 100

IF = 5 mA, VCC = 5 V,

CTR = 430%

IF = 5 mA, VCC = 5 V,

RL = 100 Ω, CTR = 430%

−5

−10

−15

−20

−25

0.1 1 10 100 1 000

0.2

0.4

0.6

0.8

1.0

1.2

1.4

−50 −25 0 25 50 75 100

CTR = 480%

CTR = 430%

Remark The graphs indicate nominal characteristics.

PS2561F-1,PS2561FL-1 Chapter Title

R08DS0033EJ0100 Rev.1.00 Page 8 of 13

Jan 06, 2012

Ambient Temperature TA (°C)

0.1

100

1 000

−50 −25 0 25 50 75 100

Rise Time tr ( s)

RISE TIME vs. AMBIENT TEMPERATURE

1 kΩ

10 kΩ

RL = 510 Ω

PS2561F-1 (CTR = 410%)

PS2501-1 (CTR = 380%)

Ambient Temperature TA (°C)

0.1

100

1 000

−50 −25 0 25 50 75 100

Delay Time td ( s)

DELAY TIME vs. AMBIENT TEMPERATURE

RL = 510 Ω,

1 kΩ,

10 kΩ

PS2561F-1 (CTR = 410%)

PS2501-1 (CTR = 380%)

Ambient Temperature TA (°C)

0.1

100

1 000

−50 −25 0 25 50 75 100

Fall Time tf ( s)

FALL TIME vs. AMBIENT TEMPERATURE

RL = 510 Ω

PS2561F-1 (CTR = 410%)

PS2501-1 (CTR = 380%)

10 kΩ

1 kΩ

Ambient Temperature TA (°C)

0.1

100

1 000

−50 −25 0 25 50 75 100

Storage Time ts ( s)

STORAGE TIME vs.

AMBIENT TEMPERATURE

RL = 510 Ω

PS2561F-1 (CTR = 410%)

PS2501-1 (CTR = 380%)

10 kΩ

*1 *1

Input

Output

90%

10%

ton toff

VCC

VOUT

510 Ω

In monitor

PW = 100 s

Duty cycle = 1/10

Pulse Input

*1 Test circuit for switching time above

Vin (high) = 5 V VCC = 5 V

Remark The graphs indicate nominal characteristics.

PS2561F-1,PS2561FL-1 Chapter Title

R08DS0033EJ0100 Rev.1.00 Page 9 of 13

Jan 06, 2012

TAPING SPECIFICATIONS (UNIT: mm)

Tape Direction

PS2561FL-1-F3

Outline and Dimensions (Tape)

1.55±0.1

2.0±0.1

4.0±0.1

1.75±0.1

4.5 MAX.

4.0±0.1

0.4

5.3±0.1

8.0±0.1

7.5±0.1

16.0±0.3

10.3±0.1

1.5

+0.1

–0

Outline and Dimensions (Reel)

Packing: 2 000 pcs/reel

2.0±0.5

R 1.0

13.0±0.2

21.0±0.8

330±2.0

100±1.0

2.0±0.5

15.9 to 19.4

Outer edge of

flange

21.5±1.0

17.5±1.0

<R>

PS2561F-1,PS2561FL-1 Chapter Title

R08DS0033EJ0100 Rev.1.00 Page 10 of 13

Jan 06, 2012

RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)

Part Number

PS2561FL

Lead Bending A

lead bending type (Gull-wing)

for surface mount 9.2

2.54

1.7

2.2

<R>

PS2561F-1,PS2561FL-1 Chapter Title

R08DS0033EJ0100 Rev.1.00 Page 11 of 13

Jan 06, 2012

NOTES ON HANDLING

1. Recommended soldering conditions

(1) Infrared reflow soldering

• Peak reflow temperature 260°C or below (package surface temperature)

• Time of peak reflow temperature 10 seconds or less

• Time of temperature higher than 220°C 60 seconds or less

• Time to preheat temperature from 120 to 180°C 120±30 s

• Number of reflows Three

• Flux Rosin flux containing small amount of chlorine (The flux

with a maximum chlorine content of 0.2 Wt% is

recommended.)

120±30 s

(preheating)

220°C

180°C

Package Surface Temperature T (°C)

Time (s)

Recommended Temperature Profile of Infrared Reflow

(heating)

to 10 s

to 60 s

260°C MAX.

120°C

(2) Wave soldering

• Temperature 260°C or below (molten solder temperature)

• Time 10 seconds or less

• Preheating conditions 120°C or below (package surface temperature)

• Number of times One (Allowed to be dipped in solder including plastic mold portion.)

• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine

content of 0.2 Wt% is recommended.)

(3) Soldering by Soldering Iron

• Peak Temperature (lead part temperature) 350°C or below

• Time (each pins) 3 seconds or less

• Flux Rosin flux containing small amount of chlorine (The flux with a

maximum chlorine content of 0.2 Wt% is recommended.)

(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead

(4) Cautions

• Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.

<R>

PS2561F-1,PS2561FL-1 Chapter Title

R08DS0033EJ0100 Rev.1.00 Page 12 of 13

Jan 06, 2012

2. Cautions regarding noise

Be aware that when voltage is applied suddenly between the photocoupler’s input and output at startup, the output

transistor may enter the on state, even if the voltage is within the absolute maximum ratings.

3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler

Check the setting values before use, since the forward current conditions at CTR measurement differ according to

product.

When using products other than at the specified forward current, the characteristics curves may differ from the

standard curves due to CTR value variations or the like. Therefore, check the characteristics under the actual

operating conditions and thoroughly take variations or the like into consideration before use.

USAGE CAUTIONS

1. Protect against static electricity when handling.

2. Avoid storage at a high temperature and high humidity.

PS2561F-1,PS2561FL-1 Chapter Title

R08DS0033EJ0100 Rev.1.00 Page 13 of 13

Jan 06, 2012

Caution GaAs Products This product uses gallium arsenide (GaAs).

GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe

the following points.

• Follow related laws and ordinances when disposing of the product. If there are no applicable laws

and/or ordinances, dispose of the product as recommended below.

1. Commission a disposal company able to (with a license to) collect, transport and dispose of

materials that contain arsenic and other such industrial waste materials.

2. Exclude the product from general industrial waste and household garbage, and ensure that the

product is controlled (as industrial waste subject to special control) up until final disposal.

• Do not burn, destroy, cut, crush, or chemically dissolve the product.

• Do not lick the product or in any way allow it to enter the mouth.

All trademarks and registered trademarks are the property of their respective owners.

C - 1

Revision History PS2561F-1,PS2561FL-1 Data Sheet

Description

Rev. Date Page Summary

0.01 Dec 22, 2010 − First edition issued

1.00 Jan 06, 2012 Throughout Preliminary Data Sheet -> Data Sheet

Throughout Safety standards approved

Throughout Deletion of the descriptions for PS2561FL1-1,PS2561FL2-1

p.1 Modification of APPLICATIONS

p.3 Modification of MARKING EXAMPLE

p.3 Addition of ORDERING INFORMATION

p.4 Modification of ABSOLUTE MAXIMUM RATINGS IC

p.5 Modification of ELECTRICAL CHARACTERISTICS tr, tf

pp.6 to 8 Addition of TYPICAL CHARACTERISTICS

p.9 Addition of TAPING SPECIFICATIONS

p.10 Modification of RECOMMENDED MOUNT PAD DIMENSIONS

p.11 Modification of NOTES ON HANDLING

Notice

1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas

Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to

be disclosed by Renesas Electronics such as that disclosed through our website.

2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or

technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or

others.

3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.

4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for

the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the

use of these circuits, software, or information.

5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and

regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to

the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is

prohibited under any applicable domestic or foreign laws or regulations.

6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics

assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.

7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product

depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas

Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for

which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the

use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics.

The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc.

"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools;

personal electronic equipment; and industrial robots.

"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically

designed for life support.

"Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical

implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.

8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage

range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the

use of Renesas Electronics products beyond such specified ranges.

9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and

malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the

possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to

redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult,

please evaluate the safety of the final products or system manufactured by you.

10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics

products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes

no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.

11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics.

12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries.

(Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.

(Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.

http://www.renesas.com

Refer to "http://www.renesas.com/" for the latest and detailed information.

Renesas Electronics America Inc.

2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A.

Tel: +1-408-588-6000, Fax: +1-408-588-6130

Renesas Electronics Canada Limited

1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada

Tel: +1-905-898-5441, Fax: +1-905-898-3220

Renesas Electronics Europe Limited

Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K

Tel: +44-1628-585-100, Fax: +44-1628-585-900

Renesas Electronics Europe GmbH

Arcadiastrasse 10, 40472 Düsseldorf, Germany

Tel: +49-211-65030, Fax: +49-211-6503-1327

Renesas Electronics (China) Co., Ltd.

7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China

Tel: +86-10-8235-1155, Fax: +86-10-8235-7679

Renesas Electronics (Shanghai) Co., Ltd.

Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China

Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898

Renesas Electronics Hong Kong Limited

Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong

Tel: +852-2886-9318, Fax: +852 2886-9022/9044

Renesas Electronics Taiwan Co., Ltd.

13F, No. 363, Fu Shing North Road, Taipei, Taiwan

Tel: +886-2-8175-9600, Fax: +886 2-8175-9670

Renesas Electronics Singapore Pte. Ltd.

1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632

Tel: +65-6213-0200, Fax: +65-6278-8001

Renesas Electronics Malaysia Sdn.Bhd.

Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia

Tel: +60-3-7955-9390, Fax: +60-3-7955-9510

Renesas Electronics Korea Co., Ltd.

11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea

Tel: +82-2-558-3737, Fax: +82-2-558-5141

SALES OFFICES

Colophon 1.1