APT40N60JCU3 ISOTOP(R) Buck chopper Super Junction MOSFET Power Module D VDSS = 600V RDSon = 70mW max @ Tj = 25C ID = 40A @ Tc = 25C Application * AC and DC motor control * Switched Mode Power Supplies Features * G S * * * A Benefits * Outstanding performance at high frequency operation * Stable temperature behavior * Very rugged * Direct mounting to heatsink (isolated package) * Low junction to case thermal resistance * Easy paralleling due to positive TC of VCEsat A S D G - Ultra low RDSon - Low Miller capacitance - Ultra low gate charge - Avalanche energy rated ISOTOP(R) Package (SOT-227) Very low stray inductance High level of integration ISOTOPO Absolute maximum ratings ID IDM VGS RDSon PD IAR EAR EAS IFAV IFRMS Parameter Drain - Source Breakdown Voltage Tc = 25C Tc = 80C Continuous Drain Current Pulsed Drain current Gate - Source Voltage Drain - Source ON Resistance Maximum Power Dissipation Avalanche current (repetitive and non repetitive) Repetitive Avalanche Energy Single Pulse Avalanche Energy Maximum Average Forward Current Duty cycle=0.5 RMS Forward Current (Square wave, 50% duty) Tc = 25C Tc = 80C Max ratings 600 40 30 120 20 70 290 20 1 1800 30 39 Unit V A V mW W A mJ A These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. APT website - http://www.advancedpower.com 1-8 APT40N60JCU3 - Rev 0 April, 2004 Symbol VDSS APT40N60JCU3 All ratings @ Tj = 25C unless otherwise specified Electrical Characteristics Symbol Characteristic BVDSS Drain - Source Breakdown Voltage IDSS RDS(on) VGS(th) IGSS Zero Gate Voltage Drain Current Drain - Source on Resistance Gate Threshold Voltage Gate - Source Leakage Current Test Conditions VGS = 0V, ID = 250A VGS = 0V,VDS = 600V VGS = 0V,VDS = 600V Min 600 Typ Tj = 25C Tj = 125C VGS = 10V, ID = 20A VGS = VDS, ID = 1mA VGS = 20 V, VDS = 0V 2.1 3 Min Typ 7015 2565 212 259 Max Unit V 25 250 70 3.9 100 mW V nA Max Unit A Dynamic Characteristics Symbol Ciss Coss Crss Qg Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total gate Charge Qgs Gate - Source Charge Qgd Gate - Drain Charge Td(on) Turn-on Delay Time Tr Td(off) Tf Test Conditions VGS = 0V VDS = 25V f = 1MHz VGS = 10V VBus = 300V ID = 40A Resistive Switching VGS = 15V VBus = 380V ID = 40A RG = 1.8W Rise Time Turn-off Delay Time Fall Time Eon Turn-on Switching Energy u Eoff Turn-off Switching Energy v Eon Turn-on Switching Energy u Eoff Turn-off Switching Energy v Inductive switching @ 25C VGS = 15V, VBus = 400V ID = 40A, RG = 5 Inductive switching @ 125C VGS = 15V, VBus = 400V ID = 40A, RG = 5 29 pF nC 111 20 30 115 ns 10 670 980 1100 1206 J J APT website - http://www.advancedpower.com 2-8 APT40N60JCU3 - Rev 0 April, 2004 u Eon includes diode reverse recovery v In accordance with JEDEC standard JESD24-1. APT40N60JCU3 Diode ratings and characteristics Symbol Characteristic VF Diode Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance Reverse Recovery Time trr Test Conditions IF = 30A IF = 60A IF = 30A VR = 600V VR = 600V VR = 200V IF=1A,VR=30V di/dt =100A/s Tj = 125C Tj = 25C Tj = 125C Tj = 25C 23 IF = 30A VR = 400V di/dt =200A/s Tj = 25C Tj = 125C Tj = 25C Tj = 125C Tj = 25C Tj = 125C 85 160 4 8 130 700 70 1300 30 Reverse Recovery Time IRRM Maximum Reverse Recovery Current Qrr Reverse Recovery Charge trr Qrr IRRM Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current IF = 30A VR = 400V di/dt =1000A/s Min Typ 1.6 1.9 1.4 Max 1.8 V 250 500 44 Tj = 125C Unit A pF ns A nC ns nC A Thermal and package characteristics Symbol Characteristic RthJC Min Junction to Case RthJA VISOL TJ,TSTG TL Torque Wt Typ CoolMos Diode Junction to Ambient (IGBT & Diode) RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz Storage Temperature Range Max Lead Temp for Soldering:0.063" from case for 10 sec Mounting torque (Mounting = 8-32 or 4mm Machine and terminals = 4mm Machine) Package Weight 2500 -55 Max 0.43 1.21 20 Unit C/W V 150 300 1.5 29.2 C N.m g Typical CoolMOS Performance Curve 0.5 0.4 0.35 0.9 0.7 0.3 0.25 0.5 0.2 0.15 0.1 0.05 0.3 0.1 Single Pulse 0.05 0 0.00001 0.0001 0.001 0.01 0.1 Rectangular Pulse Duration (Seconds) 1 10 Fig 1, Maximum Effective transient thermal Impedance, Junction to case vs Pulse Duration APT website - http://www.advancedpower.com 3-8 APT40N60JCU3 - Rev 0 April, 2004 Thermal Impedance (C/W) 0.45 Maxim um Effective Transient Therm al Im pedance, Junction to Case vs Pulse Duration APT40N60JCU3 45 35 30 25 20 15 10 5 0 25 50 75 100 125 150 TC, Cas e Te m perature (C) Figure 6, DC Drain Current vs Case Temperature APT website - http://www.advancedpower.com 4-8 APT40N60JCU3 - Rev 0 April, 2004 ID, DC Drain Current (A) 40 APT website - http://www.advancedpower.com 5-8 APT40N60JCU3 - Rev 0 April, 2004 APT40N60JCU3 APT40N60JCU3 APT website - http://www.advancedpower.com 6-8 APT40N60JCU3 - Rev 0 April, 2004 Typical Diode Performance Curve APT website - http://www.advancedpower.com 7-8 APT40N60JCU3 - Rev 0 April, 2004 APT40N60JCU3 APT40N60JCU3 SOT-227 (ISOTOP(R)) Package Outline 11.8 (.463) 12.2 (.480) 31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322) r = 4.0 (.157) (2 places) 8.9 (.350) 9.6 (.378) Hex Nut M4 (4 places) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504) 4.0 (.157) 4.2 (.165) (2 places) 3.3 (.129) 3.6 (.143) 14.9 (.587) 15.1 (.594) 1.95 (.077) 2.14 (.084) Anode 30.1 (1.185) 30.3 (1.193) Drain * Emitter terminals are shorted internally. Current handling capability is equal for either Emitter terminal. 38.0 (1.496) 38.2 (1.504) Source Gate ISOTOP(R) is a Registered Trademark of SGS Thomson APT reserves the right to change, without notice, the specifications and information contained herein APT's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. APT website - http://www.advancedpower.com 8-8 APT40N60JCU3 - Rev 0 April, 2004 Dimensions in Millimeters and (Inches)