Memory 32 Mb Dual-Operation Flash Memory
µPD29F032202/03/04AL
The µPD29F032202/03/04AL is a 32 Mb flash memory designed to execute simultaneously
a program or an erase operation in one bank and a read operation from the other bank,
making the device suitable for systems that need to store both code and data.
Description
Features
Product Highlights • Dual-operation architecture: reduced need for external buffer and system
overhead; lower costs
•
Three kinds of bank architecture: 4 Mb/28 Mb, 8 Mb/24 Mb or 16 Mb/16 Mb
emaNtcudorP 4/3/202230F92DPµ
noitazinagrOtiB stib61xsdrowM2/stib8xbM4
erutcetihcrArotceS )edom8x(srotces36xBK46+srotces8xBK8
)edom61x(srotces36xsdrowK23+srotces8xsdrowK4
erutcetihcrAknaB
:202230F92DPµbM82+bM4
:302230F92DPµbM42+bM8
:LA402230F92DPµbM61+bM61
noitacoLtooB toob)B-(mottobro)T-(poT
ylppuSrewoP V
CC
)A-(V6.3–V0.3=
V
CC
)B-(V3.3–V7.2=
emiTsseccAmodnaR sn58
erutarepmeTgnitarepO )X-(C°58+otC°52-
)Y-(C°58+otC°04-
egakcaP )mm02xmm21(IepyTPOSTnip-84
)mm7xmm11(AGBFepatllab-36
The information in this document is current as of March 2002. The information is subject to change without notice. For actual design-in, refer to the latest
publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every
country. Please check with an NEC sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any
means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. NEC does not assume any liability for infringement of
patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising
from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. Descriptions
of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples.
The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no
responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC endeavours to enhance the quality,
reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of
damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their
design, such as redundancy, fire-containment and anti-failure features. NEC semiconductor products are classified into the following three quality grades: “Standard”, “Special”
and “Specific”. The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated “quality assurance program” for a specific
application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each
semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains,
ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific":
Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC
semiconductor products is “Standard” unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in
applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application.
(Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above).
To find out more about the products and services available from NEC Electronics Inc.,
call 1-800-366-9782, fax 1-800-729-9288,
or visit our web site at www.necel.com
© 2002/Printed in U.S.A. Document No. M16014EU1V0PB00
64MB Flash Memory
µPD29F064115
Block Diagram
32 Mb Dual-Operation Flash Memory
µPD29F032202/03/04AL
