Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 125 Stuck - Packaging unit: 125pcs Gewinde / thread 6,3 150 0,1 12,6 8 -0,2 0,3 M3 / #4-40 13,8 B 0,5 A 3,6 C 11,7 D 0,2 330 1 LP / PC B 19 Einbauhohe / mounting height bolt : 15 6,3 -0,3 17,8 Bolzen / Gewinde / thread M3 / #4-40 Abspulrichtung LP / PC B Koplanaritat der Anschlusse 0,1 mm Coplanarity Area of Termination 0,1 mm Polzahl / Part No. : Refer to table on page 2 No. of contacts : Anschluart / Anschlulange / Terminal Length : Bauart / 6-EU Type : Anforderungsstufe / Aufdruck / Zubehor / Sonderausfuhrung / 16.8 25.0 44.5 Tragerspulenzeichnung: 054589 Reel drawing: 054589 15 39.1 25.1 33.3 56.5 Verschlubandzeichnung: 054726 Closingband drawing: 054726 25 53.0 38.9 47.0 72 37 69.3 55.3 63.5 88 Sonstige Angaben siehe Fertigungsunterlagen / Information: Class : 207=0.8m (30 in) Au CONTACT, TIN/LEAD TERMINAL Refer to table on page 2 Special : Refer to table on page 2 Polzahl/ No. of contacts A B C 0.3 +0.2 0.2 D Missing information and dimensions according to DIN 41652 Fehlende Masse und Angaben siehe DIN 41652 / - Logo : ERNI Accessory : 30.8 PCB-layout see drawing 124844 SMT - Surface Mount Technology Terminal Type : 9 LP-Layout siehe Zeichnung 124844 Refer to table on page 2 Additional indications please see the production documentation Tolerances Scale All Dimensions in mm Consider protection memo from DIN 34 Ident-Nr. / 32 Fehlende Angaben zur Verpackung: Packaging matrial: 6,4 Anschlussbereich verzinnt 6-10 m Terminal Area 6-10 m tin plating - Reel off Direction All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. d Index 08.11.2001 Date Subject to modification without Designation prior notice. TMC-S 9 bis 37-SMD-Eurostyle Drawing will not be updated. TMC-S 9 bis 37-SMD-Eurostyle Elektroapparate GmbH D-73099 ADELBERG M:00023801.SZN 054953 TMC S I Ordering Information D-Sub Connector Surface Mount Right Angle Female Assembly Height 3.6 mm Eurostyle for 3HP Subunits Number of Pins 9 15 25 37 Accessory Termination Side: Clinch nut M3 124417 124418 124419 124420 Accessory Termination Side: Clinch nut #4-40 124421 124422 124423 124424 Accessory Mating Side: Threaded bolt M3 124425 124426 124427 124428 Accessory Mating Side: Threaded bolt #4-40 124429 124430 124431 www.erni.com 124432