CSPEMI202FCTAG 2 Channel Headset Microphone EMI Filter with ESD Protection Product Description Features * Two Channels of EMI Filtering * Pi-Style EMI Filters in a Capacitor-Resistor-Capacitor (C-R-C) www.onsemi.com WLCSP5 AG SUFFIX CASE 567LT MIC_IN2 47 pF C1 47 pF 68 W A3 47 pF C3 47 pF MIC_OUT1 68 W A1 MIC_OUT2 MIC_IN1 ELECTRICAL SCHEMATIC GND The CSPEMI202FCTAG is a dual low-pass filter array integrating two pi-style filters (C-R-C) that reduce EMI/RFI emissions while at the same time providing ESD protection. This part is custom-designed to interface with a microphone port on a cellular telephone or similar device. Each high quality filter provides more than 35 dB attenuation in the 800-2700 MHz range. These pi-style filters support bidirectional filtering, controlling EMI both to and from a microphone element. They also support bipolar signals, enabling audio signals to pass through without distortion. In addition, the CSPEMI202AG provides a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The diodes safely dissipate ESD strikes of 8 kV, the maximum requirement of the IEC 61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the device provides protection for contact discharges to greater than 15 kV. The CSPEMI202FCTAG is particularly well-suited for portable electronics (e.g. cellular telephones, PDAs, notebook computers) because of its small package format and low weight. The CSPEMI202FCTAG is available in a space-saving, low-profile Chip Scale Package with RoHS compliant lead-free finishing. B2 Network * Greater than 40 dB Attenuation at 1 GHz * 8 kV ESD Protection on each Channel * * * * * MARKING DIAGRAM (IEC 61000-4-2 Level 4, Contact Discharge) 15 kV ESD Protection on each Channel (HBM) Supports Bipolar Signals - Ideal for Audio Applications Chip Scale Package Features Extremely Low Lead Inductance for Optimum Filter and ESD Performance 5-Bump, 0.930 x 1.410 mm Footprint Chip Scale Package (CSP) These Devices are Pb-Free and are RoHS Compliant Applications * * * * * * * EMI Filtering and ESD Protection for Headset Microphone Ports Wireless Handsets Handheld PCs / PDAs MP3 Players Digital Camcorders Notebooks Desktop PCs (c) Semiconductor Components Industries, LLC, 2015 August, 2015 - Rev. 0 1 AE AE + = CSPEMI202FC ORDERING INFORMATION Device Package Shipping CSPEMI202FCTAG CSP-5 (Pb-Free) 3500 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Publication Order Number: CSPEMI202FC/D CSPEMI202FCTAG PACKAGE / PINOUT DIAGRAMS Table 1. PIN DESCRIPTIONS 5-bump CSP Package Top View (Bumps Down View) Pin Name Description A1 MIC_IN1 Microphone Input 1 (from microphone) A3 MIC_IN2 Microphone Input 2 (from microphone) B2 GND C1 MIC_OUT1 Microphone Output 1 (to audio circuitry) C3 MIC_OUT1 Microphone Output 2 (to audio circuitry) Orientation Marking A Device Ground + Bottom View (Pins Up View) 1 2 3 Orientation Marking B C1 C3 B2 A1 C A1 A3 CSPEMI202FC CSP Package SPECIFICATIONS Table 2. ABSOLUTE MAXIMUM RATINGS Parameter Rating Units -65 to +150 C DC Power per Resistor 100 mW DC Package Power Rating 200 mW Storage Temperature Range Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Table 3. STANDARD OPERATING CONDITIONS Parameter Operating Temperature Range Rating Units -40 to +85 C Table 4. ELECTRICAL OPERATING CHARACTERISTICS (Note 1) Symbol Parameter Conditions Min Typ Max Units R1 Resistance 61 68 75 W C1 Channel Capacitance 76 94 112 pF 1.0 mA ILEAK Diode Leakage Current VIN = 5.0 V VSIG Signal Voltage Positive Clamp Negative Clamp ILOAD = 10 mA VESD In-system ESD Withstand Voltage a) Human Body Model, MIL-STD-883, Method 3015 b) Contact Discharge per IEC 61000-4-2 Level 4 (Note 2) Clamping Voltage during ESD Discharge MIL-STD-883 (Method 3015), 8 kV Positive Transients Negative Transients (Notes 2 and 3) VCL fC 5 -15 7 -10 15 -5 V kV 15 8 V +15 -19 Cut-off frequency ZSOURCE = 50 W, ZLOAD = 50 W 60 MHz Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. TA = 25C unless otherwise specified. 2. ESD applied to input and output pins with respect to GND, one at a time. 3. Clamping voltage is measured at the opposite side of the EMI filter to the ESD pin. For example, if ESD is applied to Pin A1, then clamping voltage is measured at Pin C1. www.onsemi.com 2 CSPEMI202FCTAG PERFORMANCE INFORMATION Typical Filter Performance (nominal conditions unless specified otherwise, 50 W Environment) Figure 1. Insertion Loss vs. Frequency (A1-C1 to GND B2) Figure 2. Insertion Loss vs. Frequency (A3-C3 to GND B2) www.onsemi.com 3 CSPEMI202FCTAG APPLICATION INFORMATION Parameter Value Pad Size on PCB 0.240 mm Pad Shape Round Pad Definition Non-Solder Mask defined pads Solder Mask Opening 0.290 mm Round Solder Stencil Thickness 0.125 mm - 0.150 mm Solder Stencil Aperture Opening (laser cut, 5% tapered walls) 0.300 mm Round Solder Flux Ratio 50/50 by volume Solder Paste Type No Clean Pad Protective Finish OSP (Entek Cu Plus 106A) Tolerance - Edge To Corner Ball 50 mm Solder Ball Side Coplanarity 20 mm Maximum Dwell Time Above Liquidous 60 seconds Maximum Soldering Temperature for Lead-free Devices using a Lead-free Solder Paste 260C Non-Solder Mask Defined Pad 0.240 mm DIA. Solder Stencil Opening 0.300 mm DIA. Solder Mask Opening 0.290 mm DIA. Figure 3. Recommended Non-Solder Mask Defined Pad Illustration Temperature (5C) 250 200 150 100 50 0 1:00.0 2:00.0 3:00.0 Time (minutes) 4:00.0 Figure 4. Lead-free (SnAgCu) Solder Ball Reflow Profile www.onsemi.com 4 CSPEMI202FCTAG PACKAGE DIMENSIONS WLCSP5, 1.41x0.94 CASE 567LT ISSUE O EE EE E PIN A1 REFERENCE 2X A B NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. COPLANARITY APPLIES TO SPHERICAL CROWNS OF SOLDER BALLS. D DIM A A1 A2 b D E eD eE 0.05 C 2X 0.05 C TOP VIEW A2 0.05 C A RECOMMENDED SOLDERING FOOTPRINT* 0.05 C NOTE 3 5X A1 C SEATING PLANE PACKAGE OUTLINE A1 0.87 eE b 0.05 C A B 0.03 C SIDE VIEW MILLIMETERS MIN MAX 0.40 0.50 0.21 0.27 0.23 REF 0.29 0.35 1.41 BSC 0.94 BSC 0.435 BSC 0.25 BSC eD 0.44 C 5X 0.25 0.50 B A 1 2 3 BOTTOM VIEW 0.25 DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative CSPEMI202FC/D