Table of Contents Nylon Strain Relief Fittings Table of Contents 3 4 5 6 7 8 9 9 10 11 12 Nylon Fittings - Introduction Straight Dome/Flex - PG/NPT Threads Straight Dome/Flex - Metric Threads Straight Dome/Flex - Elongated PG/Metric Threads Straight Dome/Flex - Reduced/Enlarged Body - PG 90 Snap Elbow Dome/Flex - PG/NPT/Metric Threads Clamp High Performance Pull-Out Resist. - PG & Metric Romex(R) Fittings for Flat Cable Multi-Hole Fittings - PG Threads Multi-Hole Fittings - NPT Threads Multi-Hole Fittings - Metric Threads Nickel Plated Brass Fittings 13 14 15 16 16 17 17 17 18 19 20 20 21 21 22 23 24 Nickel Plated Brass Fittings - Introduction Straight Dome/Flex - PG/NPT & Metric Threads Straight Dome/Flex - Elongated PG/Metric Threads Mini WADI - Smallest Cable O.D. - PG & Metric Wadi XL - Largest Cable O.D. - Metric & BSPP 90 Snap Elbow Dome - PG/Metric Threads & Flange Clamping Extra Pull-out Resistance - PG/NPT/Metric Clamp Extra Pull-out Resistance - Elongated PG/Metric EMI/RFI FIttings: Product Features EMI/RFI Fittings: Applications & Assembly EMI/RFI: Standard - PG/NPT/Metric Threads EMI/RFI: Standard - Elongated PG/Metric EMI/RFI: Feed-Through - PG/NPT/Metric Threads EMI/RFI: Feed-Through - Elongated PG/Metric Multi-Hole Fittings - PG Threads Multi-Hole Fittings - NPT Threads Multi-Hole Fittings - Metric Threads PVDF & Stainless Steel Fittings 25 26 26 27 28 PVDF (FPM) High/Low Temp. - PG/NPT & Metric Nickel Plated Brass w/ PVDF (FPM) - PG/NPT/Metric Nickel Plated Brass w/ PVDF (FPM) - Elong. PG/Metric (303 & 316L) Stainless Steel Fittings - PG/NPT & Metric Stainless Steel Hygienic - RG & FP Strain Relief Accessories 29 30 31 32 32 33 33 34 34 Locking Nuts - Nylon, Nickel Plated Brass & Accessories Overview Locking Nuts - EMI/RFI, Stainless Steel, Zinc Plated Steel, Nickel Plated Brass O-Rings & Seal Rings, Blind Plugs - Nylon Dome Plugs - Nylon & Nickel Plated Brass Hex Plugs - Black Nylon Hex Plugs - Nickel Plated Brass Hex Plugs - (303) Stainless Steel (INOX) Cable Clamp (Low Profile) - Nickel Plated Brass Deep Socket Wrenches - PG/NPT/Metric Sizes Why choose Sealcon as your cable management partner? Sealcon was founded in the fall of 1989 in Englewood, Colorado. Our goal is to provide customers with the best possible cable management solutions. We are proud to represent the leading German manufacturer of Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands, Circular Connectors, Industrial Enclosures, Flexible Conduit, and Other Cable & Wire Accessory Products. These products meet RoHS, Deca BDE, Reach, UL, UR, CSA, VDE, CE, TUV, German Lloyd, PCT, SZU, Gost, Ex-e, Ex-d, IECEx, ATEX approvals. Our manufacturer is ISO 9001 quality certified and has continuously developed leading edge technology solutions. 2 Adapters, Reducers, Enlargers 35 35 36 37 38 39 40 Thread Adapters - Nickel Plated Brass Thread Adapters - Aluminum Thread Adapters - Black Nylon & Polypropylene Thread Reducers - Nickel Plated Brass (Hex & Round) Thread Reducers - Black/Gray Nylon & Polypropylene Thread Reducers - (303) Stainless Steel Thread Enlargers - Black Nylon, NPB & Polypropylene 41 42 42 43 43 44 44 44 45 45 46 47 48 48 49 50 51 51 Conduit System - Introduction Nylon Poleon - Standard & Slit Nylon Poleon - PoleonFit Clip Nylon Poleon - PoleonFit N Nylon Poleon - PoleonFit Snap 90 Nylon Poleon - PoleonFit Nylon Poleon - PoleonFit 90 Nylon Poleon - PoleonFit Y Nylon Poleon - PoleonFit T Nylon Poleon - PoleonFit DUO-PA Nylon Poleon - PoleonFit DUO-Ms Nylon Poleon - Bulkhead Fittings Superflex Conduit Superflex - Turn to Seal Metal Meleon Series - Meleon A, Meleon B, MeleonFit & FitS Metal Meleon Pro Series - Meleon Pro A, B & C Metal Meleon Pro Series - MeleonFit Pro & MeleonFit Pro S MeleonFit Clip Conduit System Technical Information 52 53 54 55 56 Material Specifications, Temp. & Color NEMA Ratings - Description & Class IP Ratings - Descriptions Specifications - Torque & Thread Diameter Thread Specifications & Pitch - NPT, Metric & PG Other Products / Index 57 58 59 60 61 62 63 Circular Connectors (M8-M40) M12 Power Circular Connector - Jaeger Connectors Stainless Steel - Ex/EXIOS - (INOX) 303 & 316L Industrial Enclosure Solutions P/N Index / Cross Reference P/N Index / Cross Reference P/N Index / Cross Reference - M12 Cordsets We can usually ship your order within 24 hours from our central warehouse in Colorado. We replenish our inventory weekly and can respond to changing demands quickly. This catalog is a condensed version of our supplier's master catalog and is available to our customers upon request. Our experienced staff will help to answer any technical questions and are able to recommend the correct samples for evaluation. Purchase orders, received before noon MST are often shipped the same day. Please give us a call so we can help you with your application requirements. Sample your application or request your catalog today! Daniel Spuhler, CEO & President www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Why Choose Sealcon Strain Relief? Features, Functions & Benefits Features & Benefits: * * * * * * UL/UR CSA VDE CAGE PATENT E103997 074032 71339 0 UE11 4145075 Nylon Strain Relief * * * * * NEMA 4x & 6 (IP 67 & 68) - Liquid Tight - Submersible to 300 ft! IP 69K rated - Ideal in splash or hose down applications! Patented Form Seal allows 150 PSIG (10 BAR) rating - Highest in Industry! V0 flame rating according to UL 94 (Dome Nylon & PVDF Only) Phosphorous Free - Non-Toxic! UL f1 (746C) UV/Ozone stable Black Nylon - Ideal for the Outdoors! Concentric O-Ring Groove - meets most NEMA applications! Safety Ratchet Top Cap - Preventing Dome/Flex top from coming loose under vibration! Large selection - Cable Range from .08" (2 mm) to 1.73" (44 mm). Non-Corrosive - Resistant to salt water, weak acids, weak alkalis, alcohol, esters, ketones, ether, gasoline, mineral, animal & vegetable oil. Durable - Rugged Construction. RoHS & Deca BDE - Environmentally Compliant to the newest standards! (IS) Intrinsically Safe: Standard Nylon Blue Pull-out Resistance & Cable Protection Overlapping clamping splines apply a concentric pressure to seal and cable, thereby preventing the form seal from being pulled out of the fitting. This ensures pull-out protection without damage to the cable. d uct ! o r P e Un i qu Submersible The patented recess and high performance form seal (grommet) guarantees NEMA 4x & 6 (IP 68 / IP 69K) at 150 PSIG (10 bar). Rugged Construction The self locking ACME thread prevents the dome or flex nut from being pulled out under extreme lateral force. Liquid Tight Molded O-Ring groove with O-Ring results in a liquid tight seal between Fitting and Installation. Time Saving Installation Simply push the cable through Strain Relief Fitting - Tighten Dome or Flex Nut - Done! No disassembly of the Fitting required! Standard, Reduced and Multi-Hole Inserts Reduced ULf1 (746C) Outdoor Applications All Black Nylon (Dome & Flex) Strain Relief Fittings, Cord Grips, Cable Glands are now made with UV / Ozone Stable material. Modularity: Increase and decrease cable Standard opening by swapping out inserts to accommodate various cable sizes & configurations. Romex(R) / Multi-Hole Elbow Fittings Also available in ATEX/IECEx & cUS For Space and time saving installations: Open Elbow - Insert cable Snap close - Tighten Nut - Finished! Available with Dome for static, or Flex Nut for dynamic applications. NOTE: Nylon Fittings do not come with an O-Ring. Romex(R) is a federally registered trademark of Southwire Company. Flex Nut Kinking and chafing of the cable is eliminated in dynamic applications. How to feed a cable assembly with connector through a strain relief fitting: 1. Determine largest dimension of the plug. 2. Choose Strain Relief with appropriate Dome opening (see table on page 56). 3. Drill solid insert to exact cable diameter & slice insert on one side only. 4. Assemble by feeding Connector first through dome nut and Strain Relief body, snap insert over cable and insert into body, tighten dome nut - Done! 5. This applies to PG, NPT or Metric solutions. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 3 Nylon Liquid Tight Strain Relief Fittings Standard - PG & NPT Threads * RoHS Part Numbers Cable Range -40F to 212F (-40C to 100C) Nylon Strain Relief Dome Fittings Gray Flex Fittings Black Gray Inches (mm) CD07AA-BK CD07AA-GY CDO7AR-BK CDO7AR-GY CD09AA-BK CD09AA-GY CD09AR-BK CD09AR-GY CD11AA-BK CD11AA-GY CD11AR-BK CD11AR-GY CD13AA-BK CD13AA-GY CD13AR-BK CD13AR-GY CD16AA-BK CD16AA-GY CD16AR-BK CD16AR-GY CD21AA-BK CD21AA-GY CD21AR-BK CD21AR-GY CD29AA-BK CD29AA-GY CD29AR-BK CD29AR-GY CD36AA-BK CD36AA-GY CD36AR-BK CD36AR-GY CD42AA-BK CD42AA-GY CD42AR-BK CD42AR-GY CD48AA-BK CD48AA-GY CD48AR-BK CD48AR-GY CF07AA-BK CF07AR-BK CF09AA-BK CF09AR-BK CF11AA-BK CF11AR-BK CF13AA-BK CF13AR-BK CF16AA-BK CF16AR-BK CF21AA-BK CF21AR-BK - CF07AA-GY CF07AR-GY CF09AA-GY CF09AR-GY CF11AA-GY CF11AR-GY CF13AA-GY CF13AR-GY CF16AA-GY CF16AR-GY CF21AA-GY CF21AR-GY - .12 - .26 (3 - 6.5) .08 - .20 (2 - 5) .16 - .31 (4 - 8) .08 - .24 (2 - 6) .20 - .39 (5 - 10) .12 - .28 (3 - 7) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .28 - .47 (7-12) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) .98 - 1.22 (25 - 31) 1.46 - 1.73 (37 - 44) 1.14 - 1.38 (29 - 35) CD09NA-GY CD09NR-GY CD13NA-GY CD13NR-GY CD16NA-GY CD16NRGY CD21NA-GY CD21NR-GY CD29NA-GY CD29NR-GY CD29LA-GY CD29LR-GY CD36NA-GY CD36NR-GY CF09NA-BK CF09NR-BK CF13NA-BK CF13NR-BK CF16NA-BK CF16NRBK CF21NA-BK CF21NR-BK - CF09NA-GY CF09NR-GY CF13NA-GY CF13NR-GY CF16NA-GY CF16NRGY CF21NA-GY CF21NR-GY - .16 - .31 (4 - 8) .08 - .24 (2 - 6) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .28 - .47 (7 - 12) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) .71 - .98 (18 - 25) .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) .79 - 1.02 (20 - 26) Black CD09NA-BK CD09NR-BK CD13NA-BK CD13NR-BK CD16NA-BK CD16NRBK CD21NA-BK CD21NR-BK CD29NA-BK CD29NR-BK CD29LA-BK CD29LR-BK CD36NA-BK CD36NR-BK Thread Type & Size The straight PG 7 thread fits a 1/4" NPT female or 1/2"-20 UNF thread. *Note: UL f1 (746C) rating applies to Black Nylon Fittings only. Dimensions in Inches (mm) A B C TL F1/F Clearance Hole Body Length (Dome) Body Length (Flex) Thread Length Wrench Flats See Page 56 for thread specs +.01" (+.25 mm) PG 7 / 1/4" NPT .49 ( 12.5) .83 (21) 2.13 (54) .31 (8) .59 (15) PG 9 .60 (15.2) .87 (22) 2.48 (63) .31 (8) .75 (19) PG11 .73 (18.5) .98 (25) 3.07 (78) .31 (8) .87 (22) PG 13 / 13.5 .80 (20.3) 1.06 (27) 3.54 (90) .35 (9) .94 (24) PG 16 .89 (22.5) 1.10 (28) 3.94 (100) .39 (10) 1.06 (27) PG 21 1.12 (28.4) 1.22 (31) 4.49 (114) .43 (11) 1.30 (33) PG 29 1.47 (37.3) 1.54 (39) - .43 (11) 1.65 (42) PG 36 1.85 (47) 1.89 (48) - .51 (13) 2.09 (53) PG 42 2.13 (54.1) 1.93 (49) - .51 (13) 2.36 (60) PG 48 2.34 (59.4) 1.93 (49) - .55 (14) 2.56 (65) 3/8" NPT .68 ( 17.2) .87 ( 22) 2.48 ( 63) .59 (15) .75 (19) / .87 (22) 1/2" NPT .83 (21.1) 1.06 (27) 3.54 (90) .51 (13) .94 (24) 1/2" - E NPT .83 (21.1) 1.10 (28) 3.94 (100) .51 (13) 1.06 (27) 3/4" NPT 1.05 (26.7) 1.22 (31) 4.49 (114) .55 (14) 1.30 (33) 1" NPT 1.35 (34.3) 1.54 (39) - .75 (19) 1.65 (42) 1-1/4" NPT 1.65 (41.9) 1.54 (39) - .63 (16) 1.65 (42) / 1.81 (46) 1-1/2" NPT 1.92 (48.7) 1.89 (48) - .79 (20) 2.09 (53) Dome Fittings also available with the following approvals: www.SealconEX.com For Material Specifications and Approval Information refer to page 52. 4 Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Nylon Liquid Tight Strain Relief Fittings Standard - Metric Threads * RoHS Part Numbers Cable Range Thread Type & Size -40F to 212F (-40C to 100C) Flex Fittings A Clearance Hole Black Gray Black Gray Inches (mm) CD12MA-BK CD12MR-BK CD16MA-BK CD16MR-BK CD17MA-BK CD17MR-BK CD20MA-BK CD20MR-BK CD22MA-BK CD22MR-BK CD25MA-BK CD25MR-BK CD32MA-BK CD32MR-BK CD40MA-BK CD40MR-BK CD50MA-BK CD50MR-BK CD63MA-BK CD63MR-BK CD12MA-GY CD12MR-GY CD16MA-GY CD16MR-GY CD17MA-GY CD17MR-GY CD20MA-GY CD20MR-GY CD22MA-GY CD22MR-GY CD25MA-GY CD25MR-GY CD32MA-GY CD32MR-GY CD40MA-GY CD40MR-GY CD50MA-GY CD50MR-GY CD63MA-GY CD63MR-GY CF12MA-BK CF12MR-BK CF16MA-BK CF16MR-BK CF17MA-BK CF17MR-BK CF20MA-BK CF20MR-BK CF22MA-BK CF22MR-BK CF25MA-BK CF25MR-BK - CF12MA-GY CF12MR-GY CF16MA-GY CF16MR-GY CF17MA-GY CF17MR-GY CF20MA-GY CF20MR-GY CF22MA-GY CF22MR-GY CF25MA-GY CF25MR-GY - .12 - .26 (3 - 6.5) .08 - .20 (2 - 5) .16 - .31 (4 - 8) .08 - .24 (2 - 6) .20 - .39 (5 - 10) .12 - .28 (3 - 7) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .28 - .47 (7-12) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) .98 - 1.22 (25 - 31) 1.46 - .73 (37 - 44) 1.14 - 1.38 (29 - 35) B C TL F1/F Body Length (Dome) Body Length (Flex) Thread Length Wrench Flats See Page 56 for thread specs +.01" (+.25 mm) M12 X 1.5 .47 ( 12) .83 (21) 2.13 (54) .31 (8) .59 (15) M16 X 1.5 .63 (16) .87 (22) 2.48 (63) .31 (8) .75 (19) M16 X 1.5 Enlarged .63 (16) .98 (25) 3.07 (78) .31 (8) .87 (22) M20 X 1.5 .79 (20) 1.06 (27) 3.54 (90) .35 (9) .94 (24) M20 X 1.5 Enlarged .79 (20) 1.10 (28) 3.94 (100) .39 (10) 1.06 (27) M25 X 1.5 .98 (25) 1.22 (31) 4.49 (114) .43 (11) 1.30 (33) M32 X 1.5 1.26 (32) 1.54 (39) - .43 (11) 1.65 (42) M40 X 1.5 1.57 (40) 1.89 (48) - .51 (13) 2.09 (53) M50 X 1.5 1.97 (50) 1.93 (49) - .51 (13) 2.36 (60) M63 X 1.5 2.48 (63) 1.93 (49) - .55 (14) 2.56 (65) / 2.68 (68) Nylon Strain Relief Dome Fittings Dimensions in Inches (mm) *Note: UL f1 (746C) rating applies to Black Nylon Fittings only. Installs in either knockout or threaded holes. F1/F A B TL Suggested Clearance Hole for Non-Threaded Mounting C Dome Fittings also available with the following approvals: F1/F TL www.SealconEX.com Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 5 Nylon Strain Relief Nylon Liquid Tight Strain Relief Fittings Elongated - PG & Metric Threads * Elongated Thread Fittings are recommended where the Strain Relief has to pass through a thick wall or the application just needs the extra thread length. Wall F1/F B Cable Range Thread Type & Size Flex Fittings Gray Inches (mm) CD07CA-BK CD07CA-GY CDO7CR-BK CDO7CR-GY CD09CA-BK CD09CA-GY CD09CR-BK CD09CR-GY CD11CA-BK CD11CA-GY CD11CR-BK CD11CR-GY CD13CA-BK CD13CA-GY CD13CR-BK CD13CR-GY CD16CA-BK CD16CA-GY CD16CR-BK CD16CR-GY CD21CA-BK CD21CA-GY CD21CR-BK CD21CR-GY CD29CA-BK CD29CA-GY CD29CR-BK CD29CR-GY CD36CA-BK CD36CA-GY CD36CR-BK CD36CR-GY CD42CA-BK CD42CA-GY CD42CR-BK CD42CR-GY CD48CA-BK CD48CA-GY CD48CR-BK CD48CR-GY CF07CA-BK CF07CR-BK CF09CA-BK CF09CR-BK CF11CA-BK CF11CR-BK CF13CA-BK CF13CR-BK CF16CA-BK CF16CR-BK CF21CA-BK CF21CR-BK - CF07CA-GY CF07CR-GY CF09CA-GY CF09CR-GY CF11CA-GY CF11CR-GY CF13CA-GY CF13CR-GY CF16CA-GY CF16CR-GY CF21CA-GY CF21CR-GY - .12 - .26 (3 - 6.5) .08 - .20 (2 - 5) .16 - .31 (4 - 8) .08 - .24 (2 - 6) .20 - .39 (5 - 10) .12 - .28 (3 - 7) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .28 - .47 (7-12) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) .98 - 1.22 (25 - 31) 1.46 - .73 (37 - 44) 1.14 - 1.38 (29 - 35) CD12DA-GY CD12DR-GY CD16DA-GY CD16DR-GY CD17DA-GY CD17DRGY CD20DA-GY CD20DR-GY CD22DA-GY CD22DR-GY CD25DA-GY CD25DR-GY CD32DA-GY CD32DR-GY CD40DA-GY CD40DR-GY CD50DA-GY CD50DR-GY CD63DA-GY CD63DR-GY CF12DA-BK CF12DR-BK CF16DA-BK CF16DR-BK CF17DA-BK CF17DRBK CF20DA-BK CF20DR-BK CF22DA-BK CF22DR-BK CF25DA-BK CF25DR-BK - .12 - .26 (3 - 6.5) CF12DA-GY .08 - .20 (2 - 5) CF12DR-GY .16 - .31 (4 - 8) CF16DA-GY .08 - .24 (2 - 6) CF16DR-GY .20 - .39 (5 - 10) CF17DA-GY .12 - .28 (3 - 7) CF17DR-GY .24 - .47 (6 - 12) CF20DA-GY .20 - .35 (5 - 9) CF20DR-GY CF22DA-GY .39 - .55 (10 - 14) CF22DR-GY .28 - .47 (7-12) CF25DA-GY .51 - .71 (13 - 18) CF25DR-GY .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) .98 - 1.22 (25 - 31) 1.46 - .73 (37 - 44) 1.14 - 1.38 (29 - 35) CD12DA-BK CD12DR-BK CD16DA-BK CD16DR-BK CD17DA-BK CD17DRBK CD20DA-BK CD20DR-BK CD22DA-BK CD22DR-BK CD25DA-BK CD25DR-BK CD32DA-BK CD32DR-BK CD40DA-BK CD40DR-BK CD50DA-BK CD50DR-BK CD63DA-BK CD63DR-BK Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. Wall www.SealconEX.com TL C TL Black Gray Suggested Clearance Hole for Non-Threaded Mounting Dome Fittings also available with the following approvals: -40F to 212F (-40C to 100C) Black A F1/F Part Numbers Dome Fittings * RoHS Dimensions in Inches (mm) A B C TL F1/F Clearance Hole Body Length (Dome) Body Length (Flex) Thread Length Wrench Flats See Page 56 for thread specs +.01" (+.25 mm) PG 7 .49 ( 12.5) .83 (21) 2.13 (54) .59 (15) .59 (15) PG 9 .60 (15.2) .87 (22) 2.48 (63) .59 (15) .75 (19) PG 11 .73 (18.5) .98 (25) 3.07 (78) .59 (15) .87 (22) PG 13 / 13.5 .80 (20.3) 1.06 (27) 3.54 (90) .59 (15) .94 (24) PG 16 .89 (22.5) 1.10 (28) 3.94 (100) .59 (15) 1.06 (27) PG 21 1.12 (28.4) 1.22 (31) 4.49 (114) .59 (15) 1.30 (33) PG 29 1.47 (37.3) 1.54 (39) - .59 (15) 1.65 (42) PG 36 1.85 (47) 1.89 (48) - .71 (18) 2.09 (53) PG 42 2.13 (54.1) 1.93 (49) - .71 (18) 2.36 (60) PG 48 2.34 (59.4) 1.93 (49) - .71 (18) 2.56 (65) M12 X 1.5 .47 ( 12) .83 (21) 2.13 (54) .59 (15) .59 (15) M16 X 1.5 .63 (16) .87 (22) 2.48 (63) .59 (15) .75 (19) M16 X 1.5 Enlarged .63 (16) .98 (25) 3.07 (78) .59 (15) .87 (22) M20 X 1.5 .79 (20) 1.06 (27) 3.54 (90) .59 (15) .94 (24) M20 X 1.5 Enlarged .79 (20) 1.10 (28) 3.94 (100) .59 (15) 1.06 (27) M25 X 1.5 .98 (25) 1.22 (31) 4.49 (114) .59 (15) 1.30 (33) M32 X 1.5 1.26 (32) 1.54 (39) - .59 (15) 1.65 (42) M40 X 1.5 1.57 (40) 1.89 (48) - .71 (18) 2.09 (53) M50 X 1.5 1.97 (50) 1.93 (49) - .71 (18) 2.36 (60) M63 X 1.5 2.48 (63) 1.93 (49) - .71 (18) 2.56 (65) / 2.68 (68) Elongated *Note: UL f1 (746C) rating applies to Black Nylon Fittings only. *Note: VDE rating applies to Metric Fittings only. 6 www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Nylon Liquid Tight Strain Relief Fittings Reduced Body - PG Threads Reduced Body When your cable diameter decreases, but your thread remains the same. * F F Suggested Clearance Hole for Non-Threaded Mounting A B C TL TL Nylon Strain Relief RoHS Reduced Body Strain Relief Fittings Cable Range Part Numbers -40F to 212F (-40C to 100C) Dome Fittings Thread Type & Size Flex Fittings Black Gray Black Gray Inches (mm) CD09BA-BK CD09BR-BK CD11BA-BK CD11BR-BK CD13BA-BK CD13BR-BK CD16BA-BK CD16BR-BK CD21BA-BK CD21BR-BK CD09BA-GY CD09BR-GY CD11BA-GY CD11BR-GY CD13BA-GY CD13BR-GY CD16BA-GY CD16BR-GY CD21BA-GY CD21BR-GY CF09BA-BK CF09BR-BK CF11BA-BK CF11BR-BK CF13BA-BK CF13BR-BK CF16BA-BK CF16BR-BK CF21BA-BK CF21BR-BK CF09BA-GY CF09BR-GY CF11BA-GY CF11BR-GY CF13BA-GY CF13BR-GY CF16BA-GY CF16BR-GY CF21BA-GY CF21BR-GY .11 - .26 (3 - 6.5) .08 - .20 (2 - 5) .16 - .31 (4 - 8) .08 - .24 (2 - 6) .20 - .39 (5 - 10) .11 - .28 (3 - 7) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .27 - .47 (7-12) Dimensions in Inches (mm) A B C TL F Clearance Hole Body Length (Dome) Body Length (Flex) Thread Length Wrench Flats See Page 56 for thread specs +.01" (+.25 mm) PG 9 .60 (15.2) .83 (21) 2.13 (54) .31 (8) .75 (19) PG11 .73 (18.5) .87 (22) 2.48 (63) .31 (8) .87 (22) PG 13 / 13.5 .80 (20.3) .98 (25) 3.07 (78) .35 (9) .94 (24) PG 16 .89 (22.5) 1.06 (27) 3.54 (90) .39 (10) 1.06 (27) PG 21 1.12 (28.4) 1.10 (28) 3.94 (100) .43 (11) 1.30 (33) Nylon Liquid Tight Strain Relief Fittings Enlarged Body - PG Threads Enlarged Body When your cable diameter increases, but your thread remains the same. * Dome Fittings also available with the following approvals: Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. www.SealconEX.com RoHS Enlarged Body Strain Relief Fittings Part Numbers Cable Range -40F to 212F (-40C to 100C) Dome Fittings Thread Type & Size Flex Fittings Black Gray Black Gray Inches (mm) CD07GA-BK CD07GR-BK CD09GA-BK CD09GR-BK CD11GA-BK CD11GR-BK CD13GA-BK CD13GR-BK CD16GA-BK CD16GR-BK CD07GA-GY CD07GR-GY CD09GA-GY CD09GR-GY CD11GA-GY CD11GR-GY CD13GA-GY CD13GR-GY CD16GA-GY CD16GR-GY CF07GA-BK CF07GR-BK CF09GA-BK CF09GR-BK CF11GA-BK CF11GR-BK CF13GA-BK CF13GR-BK CF16GA-BK CF16GR-BK CF07GA-GY CF07GR-GY CF09GA-GY CF09GR-GY CF11GA-GY CF11GR-GY CF13GA-GY CF13GR-GY CF16GA-GY CF16GR-GY .16 - .31 (4 - 8) .08 - .24 (2 - 6) .20 - .39 (5 - 10) .11 - .27 (3 - 7) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .27 - .47 (7-12) .51 - .71 (13 - 18) .35 - .63 (9 - 16) *Note: UL f1 (746C) rating applies to Black Nylon Fittings only. Dimensions in Inches (mm) A B C TL F Clearance Hole Body Length (Dome) Body Length (Flex) Thread Length Wrench Flats See Page 56 for thread specs +.01" (+.25 mm) PG 7 / 1/4" NPT .49 ( 12.5) .87 (22) 2.48 (63) .31 (8) .75 (19) PG 9 .60 (15.2) .98 (25) 3.07 (78) .31 (8) .87 (22) PG 11 .73 (18.5) .94 (24) 3.54 (90) .31 (8) .94 (24) PG 13 / 13.5 .80 (20.3) 1.10 (28) 3.94 (100) .35 (9) 1.06 (27) PG 16 .89 (22.5) 1.22 (31) 4.49 (114) .39 (10) 1.30 (33) For Material Specifications and Approval Information refer to page 52. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 7 Nylon Liquid Tight Strain Relief Fittings 90 Snap Elbow - PG / NPT / Metric Threads * RoHS Part Numbers Cable Range -40F to 212F (-40C to 100C) Nylon Strain Relief Dome Fittings Thread Type & Size Flex Fittings Black Gray Black Gray Inches (mm) ED09AA-BK ED09AR-BK ED11AA-BK ED11AR-BK ED13AA-BK ED13AR-BK ED16AA-BK ED16AR-BK ED21AA-BK ED21AR-BK ED29AA-BK ED29AR-BK ED09AA-GY ED09AR-GY ED11AA-GY ED11AR-GY ED13AA-GY ED13AR-GY ED16AA-GY ED16AR-GY ED21AA-GY ED21AR-GY ED29AA-GY ED29AR-GY EF09AA-BK EF09AR-BK EF11AA-BK EF11AR-BK EF13AA-BK EF13AR-BK EF16AA-BK EF16AR-BK EF21AA-BK EF21AR-BK - EF09AA-GY EF09AR-GY EF11AA-GY EF11AR-GY EF13AA-GY EF13AR-GY EF16AA-GY EF16AR-GY EF21AA-GY EF21AR-GY - .16 - .31 (4 - 8) .08 - .24 (2 - 6) .20 - .39 (5 - 10) .11 - .28 (3 - 7) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .28 - .47 (7-12) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) ED09NA-BK ED09NR-BK ED13NA-BK ED13NR-BK ED16NA-BK ED16NR-BK ED21NA-BK ED21NR-BK ED29NA-BK ED29NR-BK ED09NA-GY ED09NR-GY ED13NA-GY ED13NR-GY ED16NA-GY ED16NR-GY ED21NA-GY ED21NR-GY ED29NA-GY ED29NR-GY EF09NA-BK EF09NR-BK EF13NA-BK EF13NR-BK EF16NA-BK EF16NR-BK EF21NA-BK EF21NR-BK - EF09NA-GY EF09NR-GY EF13NA-GY EF13NR-GY EF16NA-GY EF16NR-GY EF21NA-GY EF21NR-GY - .16 - .31 (4 - 8) .08 - .24 (2 - 6) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .28 - .47 (7-12) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) ED16MA-BK ED16MR-BK ED20MA-BK ED20MR-BK ED25MA-BK ED25MR-BK ED32MA-BK ED32MR-BK ED16MA-GY ED16MR-GY ED20MA-GY ED20MR-GY ED25MA-GY ED25MR-GY ED32MA-GY ED32MR-GY EF16MA-BK EF16MR-BK EF20MA-BK EF20MR-BK EF25MA-BK EF25MR-BK - EF16MA-GY EF16MR-GY EF20MA-GY EF20MR-GY EF25MA-GY EF25MR-GY - .16 - .31 (4 - 8) .08 - .24 (2 - 6) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) Dimensions in Inches (mm) A B C H TL F Clearance Hole Body Length (Dome) Body Length (Flex) Height Thread Length Wrench Flats See Page 56 for thread specs +.01" (+.25 mm) PG 9 .60 (15.2) 1.77 (45) 3.35 (85) .91 (23) .31 (8) .75 (19) PG11 .73 (18.5) 1.97 (50) 4.05 (103) 1.06 (27) .31 (8) .87 (22) PG 13 / 13.5 .80 (20.3) 2.24 (57) 4.69 (119) 1.20 (30.5) .35 (9) .94 (24) PG 16 .89 (22.5) 2.32 (59) 5.12 (130) 1.28 (32.5) .39 (10) 1.06 (27) PG 21 1.12 (28.4) 2.87 (73) 6.14 (156) 1.57 (40) .43 (11) 1.30 (33) PG 29 1.47 (37.3) 3.58 (91) - 2.03 (51.5) .43 (11) 1.65 (42) 3/8" NPT .68 (17.2) 1.77 (45) 3.35 (85) .91 (23) .59 (15) .75 (19) 1/2" NPT .83 (21.1) 2.24 (57) 4.69 (119) 1.20 (30.5) .51 (13) .94 (24) 1/2" -E NPT .83 (21.1) 2.32 (59) 5.12 (130) 1.28 (32.5) .51 (13) 1.06 (27) 3/4" NPT 1.05 (26.7) 2.87 (73) 6.14 (156) 1.57 (40) .51 (13) 1.30 (33) 1" NPT 1.35 (34.3) 3.58 (91) - 2.03 (51.5) .75 (19) 1.65 (42) M16 X 1.5 .63 (16) 1.77 (45) 3.35 (85) .91 (23) .31 (8) .75 (19) M20 X 1.5 .79 (20) 2.24 (57) 4.69 (119) 1.20 (30.5) .35 (9) .94 (24) M25 X 1.5 .98 (25) 2.87 (73) 6.14 (156) 1.57 (40) .43 (11) 1.30 (33) M32 X 1.5 1.26 (32) 3.58 (91) - 2.03 (51.5) .43 (11) 1.65 (42) *Metric and PG thread elbows include an O-Ring *Note: VDE rating applies to Metric Dome Fittings only. Liquid Tight Elbow Strain Relief Fitting for space and time saving applications. C B A H TL Suggested Clearance Hole for Non-Threaded Mounting H TL Wrench Flat (F) Wrench Flat (F) Protection O-Ring: O-Ring (PG & Metric IP 68, Buna-N. Threads Only). For Material Specifications and Approval Information refer to page 52. 8 Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Nylon Liquid Tight Strain Relief Fittings Clamp High Performance - PG & Metric Threads Extra Pull-Out Resistant Strain Relief Fittings with Clamp Part Numbers Cable Range -4F to158F (-20C to 70C) Thread Type & Size Dimensions in Inches (mm) B TL F1 F Clearance Hole Body Length Thread Length Wrench Flats Liquid Tight Strain Relief Fitting with Anodized Aluminum Clamp for Extra Pull-out Resistance! Nylon Strain Relief A Nylon Body Inches (mm) See page 56 for thread specs +.01" (+.25 mm) CD09AA-CP CD11AA-CP CD13AA-CP CD16AA-CP CD21AA-CP CD29AA-CP CD36AA-CP CD42AA-CP CD48AA-CP .16 - .31 (4 - 8) .24 - .39 (6 - 10) .24 - .47 (6 - 12) .39 - .55 (10 - 14) .51 - .71 (13 - 18) .71 - .98 (18-25) .87 - 1.26 (22 - 32) 1.26 - 1.50 (32 - 38) 1.46 - 1.73 (37 - 44) PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48 .60 (15.2) .73 (18.5) .80 (20.3) .89 (22.5) 1.12 (28.4) 1.47 (37.3) 1.85 (47) 2.13 (54.1) 2.34 (59.4) 1.14 (29) 1.28 (32.5) 1.40 (35.5) 1.48 (37.5) 1.61 (41) 1.93 (49) 2.28 (58) 2.42 (61.5) 2.44 (62) .59 (15) .59 (15) .59 (15) .39 (10) .43 (11) .43 (11) .51 (13) .51 (13) .55 (14) .75 (19) .87 (22) .94 (24) 1.06 (27) 1.30 (33) 1.65 (42) 2.09 (53) 2.36 (60) 2.56 (65) CD16MA-CP CD20MA-CP CD25MA-CP CD32MA-CP CD40MA-CP CD50MA-CP CD63MA-CP .16 - .31 (4 - 8) .24 - .47 (6 - 12) .51 - .71 (13 - 18) .71 - .98 (18-25) .87 - 1.26 (22 - 32) 1.26 - 1.50 (32 - 38) 1.46 - 1.73 (37 - 44) M16 X 1.5 M20 X 1.5 M25 X 1.5 M32 X 1.5 M40 X 1.5 M50 X 1.5 M63 X 1.5 .63 (16) .79 (20) .98 (25) 1.26 (32) 1.57 (40) 1.97 (50) 2.48 (63) 1.14 (29) 1.40 (35.5) 1.61 (41) 1.93 (49) 2.28 (58) 2.42 (61.5) 2.44 (62) .59 (15) .59 (15) .43 (11) .43 (11) .51 (13) .51 (13) .55 (14) .75 (19) .94 (24) 1.30 (33) 1.65 (42) 2.09 (53) 2.36 (60) 2.56 (65) / 2.68 (68) F1/F Screw Clamp B *Clamp Fitting includes Buna-N O-Ring Romex(R) Strain Relief Fittings for Flat Cable Slot Size -40F to 212F (-40C to 100C) Inches (mm) Thread Type & Size Dimensions in Inches (mm) A B TL F1 F Clearance Hole Body Length Thread Length Wrench Flats .80 (20.3) 1.06 (27) .35 (9) .94 (24) .89 (22.5) 1.10 (28) .39 (10) 1.06 (27) See page 56 for +.01" thread specs (+.25 mm) CD13AS-A1* CD16AS-01 CD16AS-03 CD16AS-05 CD21AS-01 CD21AS-03 CD16AS-02 CD16AS-04 CD16AS-06 CD21AS-02 CD21AS-04 CD13AS-B1 CD16AS-B2 CD16AS-B1 CD21AS-B1 CD21AS-B2 .17 x .41 (4.2 x 10.4) PG 13 / 13.5 .24 x .55 (6 x 14) .20 x .45 (5 x 11.5) PG 16 .28 x .47 (7 x 12) .24 x .55 (6 x 14) PG 21 .28 x .55 (7 x 14) 1.12 (28.4) 1.22 (31) .43 (11) 1.30 (33) CD13NS-A1* CD16NS-01 CD16NS-03 CD16NS-05 CD21NS-01 CD21NS-03 CD29NS-01 CD16NS-02 CD16NS-04 CD16NS-06 CD21NS-02 CD21NS-04 - CD13NS-B1 CD16NS-B1 CD16NS-B6 CD16NS-B5 CD21NS-B1 CD21NS-B2 CD29NS-B1 .83 (21.1) .17 x .41 (4.2 x 10.4) .24 x .55 (6 x 14) 1/2" - E NPT .83 (21.1) .20 x .45 (5 x 11.5) .28 x .47 (7 x 12) .24 x .55 (6 x 14) 3/4" NPT 1.05 (26.7) .28 x .55 (7 x 14) .31 x .87 (8 x 22) 1.35 (34.3) 1" NPT 1.06 (27) .51 (13) .94 (24) 1.10 (28) .51 (13) 1.06 (27) 1.22 (31) .55 (14) 1.30 (33) 1.54 (39) .75 (19) 1.65 (42) CD20MS-A1* CD20MS-01 CD20MS-03 CD20MS-05 CD25MS-01 CD25MS-03 CD20MS-02 CD20MS-04 CD20MS-06 CD25MS-02 CD25MS-04 CD20MS-B1 CD20MS-B2 CD25MS-B1 CD25MS-B2 .17 x .41 (4.2 x 10.4) .24 x .55 (6 x 14) .20 x .45 (5 x 11.5) .28 x .47 (7 x 12) .24 x .55 (6 x 14) .28 x .55 (7 x 14) Suggested Clearance Hole for Non-Threaded Mounting A Nylon Liquid Tight Strain Relief Fittings ROMEX(R) - PG / NPT / Metric Threads Romex(R) fittings are also available in PG 29, PG 36, PG 42, PG 48, 11/4", 11/2", M32, M40, M50, M63. Part Numbers TL _ .79 (20) 1.06 (27) .35 (9) .94 (24) M20 X 1.5 .79 (20) 1.10 (28) .35 (9) 1.06 (27) M25 X 1.5 .98 (25) 1.22 (31) .43 (11) 1.30 (33) Strain Relief Fittings with Inserts for Flat Cables and ASIBUS Cables. These form seals are also available with Strain Relief Fittings made of other materials. (Nickel Plated Brass, Stainless Steel, etc.). UL pertains to the standard body, not including FLAKA (Romex(R)) Insert. FLAKA (for Romex style cable) HSK-K 1/2"-E are UL listed. To meet UL, only Romex style cable (flat top and bottom) can be used with this style Strain Relief (no Zip Cable, no Ribbon cable, etc.). A F1/F Suggested Clearance Hole for NonThreaded Mounting B TL * Note: UL f1 rating applies to Black Nylon Fittings only. * Insert for ASI-BUS Cables Romex(R) is a federally registered trademark of Southwire Company. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 9 Nylon Liquid Tight Strain Relief Fittings Multi-Hole - PG Threads * Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. RoHS Nylon Strain Relief Multi-Hole Inserts are available in Silicone and FKM upon request. Part Numbers -40F to 212F (-40C to 100C) Thread Type & Size Black Gray See page 56 for thread specs CD07AP-BK CD07AP-GY PG 7/ 1/4" NPT CD09A1-BK CD09A2-BK CD09A3-BK CD09A4-BK CD09A5-BK CD09A6-BK CD09A7-BK CD09A8-BK CD09A9-BK CD09AP-BK CD09A1-GY CD09A2-GY CD09A3-GY CD09A4-GY CD09A5-GY CD09A6-GY CD09A7-GY CD09A8-GY CD09A9-GY CD09AP-GY CD11A1-BK CD11A2-BK CD11A3-BK CD11A4-BK CD11A5-BK CD11AP-BK CD11A1-GY CD11A2-GY CD11A3-GY CD11A4-GY CD11A5-GY CD11AP-GY CD13A1-BK CD13A2-BK CD13A3-BK CD13A4-BK CD13A5-BK CD13A6-BK CD13A7-BK CD13A8-BK CD13A9-BK CD13AP-BK CD13A1-GY CD13A2-GY CD13A3-GY CD13A4-GY CD13A5-GY CD13A6-GY CD13A7-GY CD13A8-GY CD13A9-GY CD13AP-GY CD16A1-BK CD16A2-BK CD16A3-BK CD16A4-BK CD16A5-BK CD16A6-BK CD16A7-BK CD16A8-BK CD16A9-BK CD16A0-BK CD16AP-BK CD16A1-GY CD16A2-GY CD16A3-GY CD16A4-GY CD16A5-GY CD16A6-GY CD16A7-GY CD16A8-GY CD16A9-GY CD16A0-GY CD16AP-GY PG 9 PG 11 Dimensions in Inches (mm) Diameter of Part Holes Numbers of Inserts Only No. of Holes mm Inches Solid Insert Solid Insert 1.4 4 3.0 2 1.6 5 1.7 2 1.4 10 1.4 6 1.7 3 1.7 4 2.3 4 Solid Insert 2 3 2 3 4 3.0 3.0 4.0 1.5 2.8 1.089.0799.19 .06 .12 .06 .07 .06 .06 .07 .07 .09 1.089.0900.19 1.089.0901.19 1.089.0902.19 1.089.0903.19 1.089.0904.19 1.089.0905.19 1.089.0906.19 1.089.0907.19 1.089.0908.19 1.089.0999.19 .12 .12 .16 .06 .11 1.089.1100.19 1.089.1101.19 1.089.1102.19 1.089.1103.19 1.089.1104.19 1.089.1199.19 Solid Insert PG 13 / 13.5 PG 16 www.SealconEX.com 10 Thread Type & Size See page 56 for thread specs Black Gray CD21A1-BK CD21A2-BK CD21A3-BK CD21A4-BK CD21A5-BK CD21A6-BK CD21A7-BK CD21A8-BK CD21A9-BK CD21AP-BK CD21A1-GY CD21A2-GY CD21A3-GY CD21A4-GY CD21A5-GY CD21A6-GY CD21A7-GY CD21A8-GY CD21A9-GY CD21AP-GY CD29A1-BK CD29A2-BK CD29A3-BK CD29A9-BK CD29AP-BK CD29A1-GY CD29A2-GY CD29A3-GY CD29A9-GY CD29AP-GY CD36A1-BK CD36A2-BK CD36A3-BK CD36A4-BK CD36AP-BK CD36A1-GY CD36A2-GY CD36A3-GY CD36A4-GY CD32AP-GY PG 36 CD42A1-BK CD42AP-BK CD42A1-GY CD42AP-GY PG 42 CD48A1-BK CD48A2-BK CD48A3-BK CD48AP-BK CD48A1-GY CD48A2-GY CD48A3-GY CD48AP-GY PG 21 PG 29 Dimensions in Inches (mm) Diameter of Part Holes Numbers of Inserts Only No. of Holes 4 3 2 4 1 4 3 4/1 2 mm Inches 6.0 .24 7.0 .28 8.0 .31 5.0 .20 8.0 .31 5.2 .20 5.2 .20 5.2/3.7 .20/.15 7.4 .29 Solid Insert 1.089.2100.19 1.089.2101.19 1.089.2102.19 1.089.2103.19 1.089.2104.19 1.089.2105.19 1.089.2106.19 1.089.2107.19 1.089.2108.19 1.089.2199.19 6 4 4 2 6.5 9.0 9.5 11.0 Solid Insert .26 .35 .37 .43 1.089.2900.19 1.089.2901.19 1.089.2902.19 1.089.2908.19 1.089.2999.19 5 7 6 2 9.0 9.0 8.0 15.0 Solid Insert .35 .35 .31 .59 1.089.3600.19 1.089.3601.19 1.089.3602.19 1.089.3603.19 1.089.3699.19 3 .55 14.0 Solid Insert 1.089.4203.19 1.089.4299.19 8 6 3 10.0 .39 12.0 .47 18.0 .71 Solid Insert 1.089.4800.19 1.089.4801.19 1.089.4802.19 1.089.4899.19 3 6 3 2 3 2 2 2 2 2.0 3.0 4.0 5.0 3.0 5.2 3.8 4.2 2.5 Solid Insert .08 .12 .16 .20 .12 .20 .15 .17 .10 1.089.1300.19 1.089.1301.19 1.089.1302.19 1.089.1303.19 1.089.1304.19 1.089.1305.19 1.089.1306.19 1.089.1307.19 1.089.1308.19 1.089.1399.19 3 3 4 5 6 2 3 6 *4 6 3.0 4.0 4.0 4.0 4.0 6.0 5.6 3.0 3.0 3.8 Solid Insert .12 .16 .16 .16 .16 .24 .22 .12 .12 .15 1.089.1600.19 Part Numbers Thread Dimensions in Inches (mm) 1.089.1601.19 Type Cable Diameter -40F to 212F (-40C to 100C) Part 1.089.1602.19 & Size Numbers 1.089.1603.19 of 1.089.1604.19 Inserts See page Only 1.089.1605.19 56 for 1.089.1606.19 thread specs Black mm Inches Gray 1.089.1607.19 *1.089.1610.19 1.089.16C-06 5.7 .23 CD16AK-BK CD16AK-GY PG 16 1.089.1909.19 1.089.16C-07 6.9 .27 CD16AJ-BK CD16AJ-GY 1.089.1699.19 *Note: RJ45 Solution has no approval ratings. NPT available on *Note: UL f1 (746C) rating applies to Black Nylon Fittings only. *Note: This Insert has slotted holes. Dome Fittings also available with the following approvals: Part Numbers -40F to 212F (-40C to 100C) PG 48 RJ45 Solution page 11. Metric available on page 12. Reference Diagram on page 12. Fittings with Multi-Hole Inserts are also available with a Flex Nut. To order, substitute "CF" for "CD" (e.g. CD09A1-BK becomes CF09A1-BK) For Strain Relief Specifications and Dimensions refer to page 24. "BP" (Billet Plugs) available upon request. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Nylon Liquid Tight Strain Relief Fittings Multi-Hole - NPT Threads * RoHS Part Numbers -40F to 212F (-40C to 100C) Gray CD07NP-BK CD07NP-GY CD09N1-BK CD09N2-BK CD09N3-BK CD09N4-BK CD09N5-BK CD09N6-BK CD09N7-BK CD09N8-BK CD09N9-BK CD09NP-BK CD09N1-GY CD09N2-GY CD09N3-GY CD09N4-GY CD09N5-GY CD09N6-GY CD09N7-GY CD09N8-GY CD09N9-GY CD09NP-GY CD13N1-BK CD13N2-BK CD13N3-BK CD13N4-BK CD13N5-BK CD13N6-BK CD13N7-BK CD13N8-BK CD13N9-BK CD13NP-BK CD13N1-GY CD13N2-GY CD13N3-GY CD13N4-GY CD13N5-GY CD13N6-GY CD13N7-GY CD13N8-GY CD13N9-GY CD13NP-GY CD16N1-BK CD16N2-BK CD16N3-BK CD16N4-BK CD16N5-BK CD16N6-BK CD16N7-BK CD16N8-BK CD16N9-BK CD16N0-BK CD16NP-BK CD16N1-GY CD16N2-GY CD16N3-GY CD16N4-GY CD16N5-GY CD16N6-GY CD16N7-GY CD16N8-GY CD16N9-GY CD16N0-GY CD16NP-GY Dimensions in Inches (mm) Diameter of Part Holes Numbers of Inserts Only See page 56 for thread specs PG 7 / 1/4" NPT No. of Holes 3/8" NPT 4 2 5 2 10 6 3 4 4 mm Inches 1.089.0799.19 Solid Insert 1.4 3.0 1.6 1.7 1.4 1.4 17 1.7 2.3 .06 .12 .06 .07 .06 .06 .07 .07 .09 1.089.0900.19 1.089.0901.19 1.089.0902.19 1.089.0903.19 1.089.0904.19 1.089.0905.19 1.089.0906.19 1.089.0907.19 1.089.0908.19 1.089.0999.19 Solid Insert 1/2" NPT 1/2" NPT (Enlarged) 3 6 3 2 3 2 2 2 2 2.0 3.0 4.0 5.0 3.0 5.2 3.8 4.2 2.5 Solid Insert .08 .12 .16 .20 .12 .20 .15 .17 .10 1.089.1300.19 1.089.1301.19 1.089.1302.19 1.089.1303.19 1.089.1304.19 1.089.1305.19 1.089.1306.19 1.089.1307.19 1.089.1308.19 1.089.1399.19 3 3 4 5 6 2 3.0 4.0 4.0 4.0 4.0 6.0 .12 .16 .16 .16 .16 .24 3 6 *4 6 5.6 3.0 3.0 3.8 Solid Insert .22 .12 .12 .15 1.089.1600.19 1.089.1601.19 1.089.1602.19 1.089.1603.19 1.089.1604.19 1.089.1605.19 1.089.1606.19 1.089.1607.19 *1.089.1610.19 1.089.1909.19 1.089.1699.19 *Note: UL f1(746C) rating applies to Black Nylon Fittings only. *Note: This Insert has slotted holes. Fittings with Multi-Hole Inserts are also available with a Flex Nut * To order, substitute "CF" for "CD" (e.g. CD09N1-BK becomes CF09N1-BK) Custom Solutions! * Any custom hole configuration is available for a minimum order of 1,000 pieces. * No charge for standard delivery time. For quicker delivery of 6-8 weeks, a one time Expedite fee will be accessed. * "BP" (Billet Plugs) available upon request. Dome Fittings also available with the following approvals: www.SealconEX.com Part Numbers -40F to 212F (-40C to 100C) Black Gray CD21N1-BK CD21N2-BK CD21N3-BK CD21N4-BK CD21N5-BK CD21N6-BK CD21N7-BK CD21N8-BK CD21N9-BK CD21NP-BK CD21N1-GY CD21N2-GY CD21N3-GY CD21N4-GY CD21N5-GY CD21N6-GY CD21N7-GY CD21N8-GY CD21N9-GY CD21NP-GY CD29N1-BK CD29N2-BK CD29N3-BK CD29N9-BK CD29NP-BK CD29N1-GY CD29N2-GY CD29N3-GY CD29N9-GY CD29NP-GY CD29L1-BK CD29L2-BK CD29L3-BK CD29LP-BK CD29L1-GY CD29L2-GY CD29L3-GY CD29LP-GY CD36A1-BK CD36A2-BK CD36A3-BK CD36A4-BK CD36AP-BK CD36A1-GY CD36A2-GY CD36A3-GY CD36A4-GY CD32AP-GY Thread Type & Size See page 56 for thread specs 3/4" NPT 1" NPT 1-1/4" NPT 1-1/2" NPT Dimensions in Inches (mm) Diameter of Part Holes Numbers of Inserts Only No. of Holes 4 3 2 4 1 4 3 4/1 2 Inches mm .24 1.089.2100.19 6.0 .28 1.089.2101.19 7.0 .31 1.089.2102.19 8.0 .20 1.089.2103.19 5.0 .31 1.089.2104.19 8.0 .20 1.089.2105.19 5.2 .20 1.089.2106.19 5.2 5.2/3.7 .20/.15 1.089.2107.19 .29 1.089.2108.19 7.4 1.089.2199.19 Solid Insert 6 4 4 2 6.5 9.0 9.5 11.0 Solid Insert .26 .35 .37 .43 1.089.2900.19 1.089.2901.19 1.089.2902.19 1.089.2908.19 1.089.2999.19 6 4 4 .26 6.5 .35 9.0 .37 9.5 Solid Insert 1.089.2900.19 1.089.2901.19 1.089.2902.19 1.089.2999.19 .35 .35 .31 .59 1.089.3600.19 1.089.3601.19 1.089.3602.19 1.089.3603.19 1.089.3699.19 5 7 6 2 9.0 9.0 8.0 15.0 Solid Insert RJ45 Solution Part Numbers -40F to 212F (-40C to 100C) Black Gray CD16NK-BK CD16NJ-BK CD16NK-GY CD16NJ-GY Thread Type & Size See page 56 for thread specs 1/2" E-NPT Dimensions in Inches (mm) Cable DIameter Part Numbers of Inserts Only mm Inches 5.7 6.9 .23 .27 1.089.16C-06 1.089.16C-07 *Note: RJ45 Solution has no approval ratings. Reference Diagram on page 12. Important: Design Parameters: Cable diameter should not be less than 80% of hole diameter and the difference between hole and cable diameter should never exceed .04" (1 mm). The Multi Cable fittings will meet NEMA 4x = IP 65 if the design parameters are complied with. To verify a submersible NEMA 6 = IP 68 application, the final assembly of cables and fittings must be tested by the customer or submitted at the customer's expense to an independent test lab. New UV & Ozone Stable Black TPE Membrane available (60 Different Configurations). Call for details. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 11 Nylon Strain Relief Black Thread Type & Size Nylon Liquid Tight Strain Relief Fittings Multi-Hole - Metric Threads * RoHS Part Numbers Nylon Strain Relief -40F to 212F (-40C to 100C) Gray Black CD12MP-BK CD12MP-GY CD16M1-BK CD16M2-BK CD16M3-BK CD16M4-BK CD16M5-BK CD16M6-BK CD16M7-BK CD16M8-BK CD16M9-BK CD16MP-BK CD16M1-GY CD16M2-GY CD16M3-GY CD16M4-GY CD16M5-GY CD16M6-GY CD16M7-GY CD16M8-GY CD16M9-GY CD16MP-GY CD17M1-BK CD17M2-BK CD17M3-BK CD17M4-BK CD17M5-BK CD17MP-BK CD17M1-GY CD17M2-GY CD17M3-GY CD17M4-GY CD17M5-GY CD17MP-GY CD20M1-BK CD20M2-BK CD20M3-BK CD20M4-BK CD20M5-BK CD20M6-BK CD20M7-BK CD20M8-BK CD20M9-BK CD20MP-BK CD20M1-GY CD20M2-GY CD20M3-GY CD20M4-GY CD20M5-GY CD20M6-GY CD20M7-GY CD20M8-GY CD20M9-GY CD20MP-GY CD22M1-BK CD22M2-BK CD22M3-BK CD22M4-BK CD22M5-BK CD22M6-BK CD22M7-BK CD22M8-BK CD22M9-BK CD22M0-BK CD22MP-BK CD22M1-GY CD22M2-GY CD22M3-GY CD22M4-GY CD22M5-GY CD22M6-GY CD22M7-GY CD22M8-GY CD22M9-GY CD22M0-GY CD22MP-GY Thread Type & Size See page 56 for thread specs M12 X 1.5 M16 X 1.5 M16 X 1.5 (Enlarged) Dimensions in Inches (mm) Diameter of Part Holes Numbers of Inserts Only No. of Holes mm Solid Insert Solid Insert 4 1.4 2 3.0 5 1.6 2 1.7 10 1.4 6 1.4 3 17 4 1.7 4 2.3 Solid Insert 2 3 2 3 4 3.0 3.0 4.0 1.5 2.8 1.089.0799.19 .06 .12 .06 .07 .06 .06 .07 .07 .09 1.089.0900.19 1.089.0901.19 1.089.0902.19 1.089.0903.19 1.089.0904.19 1.089.0905.19 1.089.0906.19 1.089.0907.19 1.089.0908.19 1.089.0999.19 .12 .12 .16 .06 .11 1.089.1100.19 1.089.1101.19 1.089.1102.19 1.089.1103.19 1.089.1104.19 1.089.1199.19 1.089.1300.19 1.089.1301.19 1.089.1302.19 1.089.1303.19 1.089.1304.19 1.089.1305.19 1.089.1306.19 1.089.1307.19 1.089.1308.19 1.089.1399.19 M20 X 1.5 (Enlarged) 3 6 3 2 3 2 2 2 2 2.0 3.0 4.0 5.0 3.0 5.2 3.8 4.2 2.5 Solid Insert .08 .12 .16 .20 .12 .20 .15 .17 .10 3 3 4 5 6 2 3 6 *4 6 3.0 4.0 4.0 4.0 4.0 6.0 5.6 3.0 3.0 3.8 Solid Insert .12 .16 .16 .16 .16 .24 .22 .12 .12 .15 *Note: This Insert has slotted holes. *Note: UL f1 (746C) rating applies to Black Nylon Fittings only. Black Gray CD25M1-BK CD25M2-BK CD25M3-BK CD25M4-BK CD25M5-BK CD25M6-BK CD25M1-GY CD25M2-GY CD25M3-GY CD25M4-GY CD25M5-GY CD25M6-GY CD25M7-BK CD25M8-BK CD25M9-BK CD25MP-BK CD25M7-GY CD25M8-GY CD25M9-GY CD25MP-GY CD32M1-BK CD32M2-BK CD32M3-BK CD32MP-BK CD32M1-GY CD32M2-GY CD32M3-GY CD32MP-GY CD40M1-BK CD40M2-BK CD40M3-BK CD40M4-BK CD40MP-BK CD40M1-GY CD40M2-GY CD40M3-GY CD40M4-GY CD40MP-GY CD50M1-BK CD50M1-GY CD50MP-BK CD50MP-GY CD63M1-BK CD63M2-BK CD63M3-BK CD63MP-BK CD63M1-GY CD63M2-GY CD63M3-GY CD63MP-GY See page 56 for thread specs M25 X 1.5 M32 X 1.5 Dimensions in Inches (mm) Diameter of Part Holes Numbers of Inserts Only No. of Holes mm Inches 1.089.2100.19 1.089.2101.19 1.089.2102.19 1.089.2103.19 1.089.2104.19 1.089.2105.19 .20 1.089.2106.19 5.2 3 5.2/3.7 .20/.15 1.089.2107.19 4/1 .29 1.089.2108.19 7.4 2 Solid Insert 1.089.2199.19 4 3 2 4 1 4 6.0 7.0 8.0 5.0 8.0 5.2 .24 .28 .31 .20 .31 .20 6 4 4 6.5 9.0 9.5 .26 .35 .37 1.089.2900.19 1.089.2901.19 1.089.2902.19 1.089.2999.19 .35 .35 .31 .59 1.089.3600.19 1.089.3601.19 1.089.3602.19 1.089.3603.19 1.089.3699.19 Solid Insert M40 X 1.5 5 7 6 2 9.0 9.0 8.0 15.0 Solid Insert M50 X 1.5 M63 X 1.5 3 8 6 3 14.0 .55 1.089.4203.19 Solid Insert 1.089.4299.19 .39 10.0 .47 12.0 .71 18.0 Solid Insert 1.089.4800.19 1.089.4801.19 1.089.4802.19 1.089.4899.19 RJ45 Solution Part Numbers Thread Dimensions in Inches (mm) 1.089.1600.19 Type -40F to 212F (-40C to 100C) Cable Diameter Part 1.089.1601.19 & Size Numbers 1.089.1602.19 of 1.089.1603.19 Inserts See page Only 1.089.1604.19 56 for 1.089.1605.19 thread specs Black mm Inches Gray 1.089.1606.19 1.089.1607.19 5.7 .23 1.089.16C-06 CD22MK-BK CD22MK-GY M20 (Enlarged) *1.089.1610.19 6.9 .27 1.089.16C-07 CD22MJ-BK CD22MJ-GY 1.089.1909.19 *Note: RJ45 Solution has no approval ratings. Reference Diagram below. 1.089.1699.19 Strain Relief Insert Fittings with Multi-Hole Inserts are also available with a Flex Nut. To order, substitute "CF" for "CD" (e.g. CD16M1-BK becomes CF16M1-BK). "BP" (Billet Plugs) available upon request. Custom Solutions for terminated cable! For Strain Relief Specifications and Dimensions refer to page 5. For Material Specifications and Approval Information refer to page 52. 12 Thread Type & Size -40F to 212F (-40C to 100C) Inches Solid Insert M20 X 1.5 Part Numbers Dome Nut Dome Opening Any Connector Dome Fittings also available with the following approvals: www.SealconEX.com Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Why Choose Sealcon Strain Relief? Features, Functions & Benefits * * * * * * * * * * * NEMA 4x & 6 (IP 67 & 68) - Liquid Tight - Submersible to 300 ft! IP 69K rated - Ideal in splash or hose down applications! Patented Form Seal allows 150 PSIG (10 BAR) rating - Highest in Industry! V0 flame rating according to UL 94 (Dome Nylon & PVDF Only) Phosphorous Free - Non-Toxic! UL f1 (746C) UV/Ozone stable Black Nylon - Ideal for the Outdoors! Concentric O-Ring Groove - meets most NEMA applications! Safety Ratchet Top Cap - Preventing Dome/Flex top from coming loose under vibration! Large selection - Cable Range from .08" (2 mm) to 1.73" (44 mm). Non-Corrosive - Resistant to salt water, weak acids, weak alkalis, alcohol, esters, ketones, ether, gasoline, mineral, animal & vegetable oil. Durable - Rugged Construction. RoHS & Deca BDE - Environmentally Compliant to the newest standards! E103997 074032 71339 0 UE11 4145075 Clamping: Extra Pull-Out Resistant Strain Relief Fittings Pull-out Resistance & Cable Protection d uct o r P e Un i qu ! Overlapping clamping splines apply a concentric pressure, thereby preventing the form seal (grommet) from being pulled out of the fitting. This ensures pull-out protection without damage to the cable. Submersible The patented internal sealing edge results in a superior seal between the splined Nylon clamping insert and Nickel Plated Brass body. Unique Product The patented recess and high performance form seal guarantees NEMA 4x & 6 (IP 68 / IP 69K) at 150 PSIG (10 bar). Liquid Tight All of our Nickel Plated Brass parts come with an O-Ring, which makes your application liquid tight, allowing submersion up to 300 ft. Easy Installation The anti-rotation grooves between body and spline insert prevent cable rotation while tightening the nut. Time Saving Installation Simply push the cable through Strain Relief Fitting - Tighten Dome or Flex Nut - Done! No disassembly of the Fitting required! Standard, Reduced and Multi-Hole Inserts Modularity: Increase and decrease cable opening by swapping out inserts to accommodate various cable sizes & configurations. Flex Nut The 304 Stainless Steel spring extension offers superior protection against kinking and chafing of the cable in dynamic applications. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 13 Nickel Plated Brass UL/UR CSA VDE CAGE PATENT Features & Benefits: Nickel Plated Brass Liquid Tight Strain Relief Fittings Standard - PG / NPT / Metric Threads Part Numbers Cable Range Nickel Plated Brass -40F to 212F (-40C to 100C) Dome Flex Inches (mm) CD07AA-BR CD07AR-BR CD09AA-BR CD09AR-BR CD11AA-BR CD11AR-BR CD13AA-BR CD13AR-BR CD16AA-BR CD16AR-BR CD21AA-BR CD21AR-BR CD29AA-BR CD29AR-BR CD36AA-BR CD36AR-BR CD42AA-BR CD42AR-BR CD48AA-BR CD48AR-BR .12 - .26 (3 - 6.5) CF07AA-BR .08 - .20 (2 - 5) CF07AR-BR .16 - .31 (4 - 8) CF09AA-BR .08 - .24 (2 - 6) CF09AR-BR .20 - .39 (5 - 10) CF11AA-BR .12 - .28 (3 - 7) CF11AR-BR .24 - .47 (6 - 12) CF13AA-BR .20 - .35 (5 - 9) CF13AR-BR CF16AA-BR .39 - .55 (10 - 14) .28 - .47 (7-12) CF16AR-BR CF21AA-BR .51 - .71 (13 - 18) .35 - .63 (9 - 16) CF21AR-BR .71 - .98 (18 - 25) .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) .98 - 1.22 (25 - 31) 1.46 - 1.73 (37 - 44) 1.14 - 1.38 (29 - 35) - CD09NA-BR CD09NR-BR CD13NA-BR CD13NR-BR CD16NA-BR CD16NR-BR CD21NA-BR CD21NR-BR CD29NA-BR CD29NR-BR CF09NA-BR CF09NR-BR CF13NA-BR CF13NR-BR CF16NA-BR CF16NR-BR CF21NA-BR CF21NR-BR - CD12MA-BR CD12MR-BR CD16MA-BR CD16MR-BR CD17MA-BR CD17MR-BR CD20MA-BR CD20MR-BR CD22MA-BR CD22MR-BR CD25MA-BR CD25MR-BR CD32MA-BR CD32MR-BR CD40MA-BR CD40MR-BR CD50MA-BR CD50MR-BR CD63MA-BR CD63MR-BR CF12MA-BR .12 - .26 (3 - 6.5) CF12MR-BR .08 - .20 (2 - 5) CF16MA-BR .16 - .31 (4 - 8) CF16MR-BR .08 - .24 (2 - 6) CF17MA-BR .20 - .39 (5 - 10) CF17MR-BR .08 - .24 (2 - 6) CF20MA-BR .24 - .47 (6 - 12) CF20MR-BR .20 - .35 (5 - 9) CF22MA-BR .39 - .55 (10 - 14) CF22MR-BR .28 - .47 (7-12) CF25MA-BR .51 - .71 (13 - 18) CF25MR-BR .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) .98 - 1.22 (25 - 31) 1.46 - 1.73 (37 - 44) 1.14 - 1.38 (29 - 35) - 14 .16 - .31 (4 - 8) .08 - .24 (2 - 6) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .28 - .47 (7-12) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) Thread Type & Size Dimensions in Inches (mm) RoHS A B C TL F1/F Clearance Hole Body Length (Dome) Body Length (Flex) Thread Length Wrench Flats See Page 56 for thread specs +.01" (+.25 mm) PG 7 / 1/4" NPT .49 (12.5) .75 (19) 2.17 (55) .20 (5) .55 (14) PG 9 .60 (15.2) .83 (21) 2.60 (66) .24 (6) .67 (17) PG 11 .73 (18.5) .87 (22) 3.03 (77) .24 (6) .79 (20) PG 13 / 13.5 .80 (20.3) .94 (24) 3.46 (88) .26 (6.5) .87 (22) PG 16 .89 (22.5) .91 (23) 3.86 (98) .26 (6.5) .94 (24) PG 21 1.12 (28.4) .94 (24) 4.37 (111) .28 (7) 1.18 (30) PG 29 1.47 (37.3) 1.14 (29) - .31 (8) 1.57 (40) PG 36 1.85 (47) 1.38 (35) - .31 (8) 1.97 (50) PG 42 2.13 (54.1) 1.46 (37) - .35 (9) 2.24 (57) PG 48 2.34 (59.4) 1.50 (38) - .39 (10) 2.52 (64) 3/8" NPT .68 (17.2) .83 (21) 2.60 (66) .59 (15) .67 (17) / .75 (19) 1/2" NPT .83 (21.1) .94 (24) 3.46 (88) .51 (13) .87 (22) / .94 (24) 1/2" NPT .83 (21.1) .94 (24) 3.89 (99) .51 (13) .94 (24) 3/4" NPT 1.05 (26.7) .98 (25) 4.37 (111) .51 (13) 1.18 (30) 1" NPT 1.35 (34.3) 1.14 (29) - .75 (19) 1.57 (40) M12 X 1.5 .47 (12) .75 (19) 2.17 (55) .26 (6.5) .55 (14) .24 (6) .67 (17) Dome .75 (19) Flex M16 X 1.5 .63 (16) .83 (21) 2.60 (66) M16 X 1.5 .63 (16) .87 (22) 3.03 (77) .24 (6) .79 (20) M20 X 1.5 .79 (20) .91 (23) 3.46 (88) .24 (6) .87 (22) M20 X 1.5 .79 (20) .94 (24) 3.86 (98) .24 (6) .94 (24) M25 X 1.5 .98 (25) 1.02 (26) 4.37 (111) .28 (7) 1.18 (30) M32 X 1.5 1.26 (32) 1.22 (31) - .31 (8) 1.57 (40) M40 X 1.5 1.57 (40) 1.46 (37) - .31 (8) 1.97 (50) M50 X 1.5 1.97 (50) 1.46 (37) - .35 (9) 2.24 (57) M63 X 1.5 2.48 (63) 1.50 (38) - .39 (10) 2.52 (64) / 2.68 (68) Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. Dome Fittings also available with the following approvals: www.SealconEX.com Includes O-Ring. F1/F B TL Suggested Clearance Hole for NonThreaded Mounting A C F1/F TL For Material Specifications and Approval Information refer to page 52. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Nickel Plated Brass Liquid Tight Strain Relief Fittings Elongated - PG & Metric Threads F1/F Elongated thread is recommended where the Strain Relief has to pass through a thick wall or the application just needs the extra thread length. Part Numbers * Cable Range -40F to 212F (-40C to 100C) Dome Fittings Flex Fittings Inches (mm) CD07CA-BR CD07CR-BR CD09CA-BR CD09CR-BR CD11CA-BR CD11CR-BR CD13CA-BR CD13CR-BR CD16CA-BR CD16CR-BR CD21CA-BR CD21CR-BR CD29CA-BR CD29CR-BR CD36CA-BR CD36CR-BR CD42CA-BR CD42CR-BR CD48CA-BR CD48CR-BR CF07CA-BR CF07CR-BR CF09CA-BR CF09CR-BR CF11CA-BR CF11CR-BR CF13CA-BR CF13CR-BR CF16CA-BR CF16CR-BR CF21CA-BR CF21CR-BR - .12 - .26 (3 - 6.5) .08 - .20 (2 - 5) .16 - .31 (4 - 8) .08 - .24 (2 - 6) .20 - .39 (5 - 10) .12 - .28 (3 - 7) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .28 - .47 (7-12) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) .98 - 1.22 (25 - 31) 1.46 - 1.73 (37 - 44) 1.14 - 1.38 (29 - 35) CD12DA-BR CD12DR-BR CD16DA-BR CD16DR-BR CD17DA-BR CD17DR-BR CD20DA-BR CD20DR-BR CD22DA-BR CD22DR-BR CD25DA-BR CD25DR-BR CD32DA-BR CD32DR-BR CD40DA-BR CD40DR-BR CD50DA-BR CD50DR-BR CD63DA-BR CD63DR-BR CF12DA-BR CF12DR-BR CF16DA-BR CF16DR-BR CF17DA-BR CF17DR-BR CF20DA-BR CF20DR-BR CF22DA-BR CF22DR-BR CF25DA-BR CF25DR-BR - .12 - .26 (3 - 6.5) .08 - .20 (2 - 5) .16 - .31 (4 - 8) .08 - .24 (2 - 6) .20 - .39 (5 - 10) .12 - .28 (3 - 7) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .28 - .47 (7-12) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) .98 - 1.22 (25 - 31) 1.46 - 1.73 (37 - 44) 1.14 - 1.38 (29 - 35) B Thread Type & Size A Suggested Clearance Hole for Non-Threaded Mounting TL F1/F C Wall Nickel Plated Brass RoHS Wall TL Dimensions in Inches (mm) A B C TL F1 F Clearance Hole Body Length (Dome) Body Length (Flex) Thread Length Wrench Flats See page 56 for thread specs +.01" (+.25 mm) PG 7 .49 (12.5) .75 (19) 2.17 (55) .39 (10) .55 (14) PG 9 .60 (15.2) .83 (21) 2.60 (66) .39 (10) .67 (17) PG 11 .73 (18.5) .87 (22) 3.03 (77) .39 (10) .79 (20) PG 13 / 13.5 .80 (20.3) .94 (24) 3.46 (88) .39 (10) .87 (22) PG 16 .89 (22.5) .91 (23) 3.86 (98) .39 (10) .94 (24) PG 21 1.12 (28.4) .94 (24) 4.37 (111) .47 (12) 1.18 (30) PG 29 1.47 (37.3) 1.14 (29) - .47 (12) 1.57 (40) PG 36 1.85 (47) 1.38 (35) - .59 (15) 1.97 (50) PG 42 2.13 (54.1) 1.46 (37) - .59 (15) 2.24 (57) PG 48 2.34 (59.4) 1.50 (38) - .59 (15) 2.52 (64) M12 X 1.5 .47 ( 12) .75 (19) 2.17 (55) .39 (10) .55 (14) M16 X 1.5 .63 (16) .83 (21) 2.60 (66) .39 (10) .67 (17) Dome .75 (19) Flex M16 X 1.5 .63 (16) .87 (22) 3.03 (77) .39 (10) .79 (20) M20 X 1.5 .79 (20) .91 (23) 3.46 (88) .39 (10) .87 (22) M20 X 1.5 .79 (20) .94 (24) 3.86 (98) .39 (10) .94 (24) M25 X 1.5 .98 (25) 1.02 (25) 4.37 (111) .47 (12) 1.18 (30) M32 X 1.5 1.26 (32) 1.22 (31) - .47 (12) 1.57 (40) M40 X 1.5 1.57 (40) 1.46 (37) - .59 (15) 1.97 (50) M50 X 1.5 1.97 (50) 1.46 (37) - .59 (15) 2.24 (57) M63 X 1.5 2.48 (63) 1.50 (38) - .59 (15) 2.52 (64) / 2.68 (68) Elongated *Note: VDE rating applies to Metric Dome Fittings only. Dome Fittings also available with the following approvals: www.SealconEX.com Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 15 Nickel Plated Brass Liquid Tight Strain Relief Fittings Mini WADI & WADI XL - PG & Metric Threads * Nickel Plated Brass Mini WADI Fittings solve space restriction issues. These mini components will fit into tight areas, but maintain the quality of their larger counterparts. The Standard Buna-N/TPE or the FKM O-Ring creates a reliable seal between body and housing. WADI Rating: 70 PSI, 5 BAR, IP 68. Typical Mini WADI Applications: * Fiber optics * Switches * Sensors * Small * Cameras appliances RoHS F1/F Mini WADI: Smallest Cable Gland Cable Range Part Numbers Thread Type & Size -13F to 392F -4F to 212F (-20C to 100C) (-25C to 200C) Buna-N/TPE FKM Inches (mm) CD07AW-BR* - .08 - .18 (2 - 4.5) CD06MW-BR CD08MW-BR CD10MW-BR CD06MW-RV CD08MW-RV - Dimensions in Inches (mm) A B Clearance Body Hole Length A TL F1 F Thread Length Wrench Flats See page 56 for thread +.01" (+.25 mm) specs PG 7 .08 - .13 (2 - 3.2) M6 x 1 .12 - .20 (3 - 5) M8 x 1.25 .16 - .24 (4 - 6) M10 x 1.5 B .49 (12.5) .56 (12.5) .14 (3.5) .43 (11) / .59 (15) .25 (6) .33 (8) .39 (10) .39 (10) .51 (13) .55 (14) .24 (6) .24 (6) .24 (6) .31 (8) .43 (11) .47 (12) TL Locking Nuts: for Mini WADI Part Numbers Thread Type Dimens. Inches (mm) & Size G F Thickness Wrench Flats *Note: CD07AW-BR does not come with an O-Ring. Note: CE rating applies to Mini WADI Fittings only. Also available in Stainless Steel, Elongated & EMI. See page 56 for thread specs NP-07-BR NM-06-BR NM-08-BR NM-10-BR WADI XL: Largest Cable Glands Part Numbers Cable Range -40F to 212F (-40C to 100C) Buna N Inches (mm) CX63MA-BR CX75MA-BR CX75MB-BR CX80MA-BR CX90MA-BR CX90MB-BR CX10MA-BR CX10MB-BR CX11MA-BR 1.89 - 2.17 (48-55) 1.89 - 2.17 (48-55) 2.09 - 2.36 (53-60) 2.28 - 2.56 (58-65) 2.48 - 2.76 (63-70) 2.68 - 2.95 (68-75) 2.87 - 3.15 (73-80) 3.07 - 3.35 (78-85) 3.27 - 3.54 (83-90) Thread Type & Size Suggested Clearance Hole for NonThreaded Mounting Dimensions in Inches (mm) A B TL F1 F Clearance Hole Body Length Thread Length Wrench Flats See page 56 for thread specs +.01" (+.25 mm) M63 x 1.5 2.48 (63) 1.65 (42) .39 (10) M75 x 1.5 2.95 (75) 1.65 (42) .59 (15) M80 x 2 3.15 (80) 1.65 (42) .59 (15) 2.95 (75) 3.15 (80) 3.35 (85) 3.54 (90) M90 x 2 3.54 (90) 1.65 (42) .59 (15) 3.94 (100) M100 x 2 3.94 (100) 2.05 (52) .79 (20) 4.33 (110) M110 x 2 4.33 (110) 2.05 (52) .79 (20) 4.72 (120) PG 7 M6 x 10 M8 x 1.25 M10 x 1.5 .11 (2.8) .10 (2.5) .10 (2.5) .11 (2.8) B TL F1/F Locking Nuts: for WADI XL Part Numbers Thread Type Dimens. Inches (mm) & Size F G Thickness Wrench Flats See page 56 for thread specs NM-63-BR NM-75-XL NM-80-XL NM-90-XL NM-10-XL NM-11-XL 16 M63 x 1.5 M75 x 1.5 M80 x 2 M90 x 2 M100 x 2 M110 x 2 Wrench Flat (F) G A .24 (6) .32 (8) .32 (8) .32 (8) .43 (11) .43 (11) 2.76 (70) 3.35 (85) 3.54 (90) 3.94 (100) 4.53 (115) 4.92 (125) Suggested Clearance Hole for NonThreaded Mounting .59 (15) .39 (10) .51 (13) .51 (13) Typical XL Applications: * Off-shore * Machine * Renewable Energy & Apparatus * Utilities * Automation * Nuclear Power * Railroads * Ship Building * Printing Machines Silicone or FKM Inserts & O-Rings for WADI XL Fittings are available on request. For inquiries, please call our Inside Technical Sales Department (800) 456-9012 or (303) 699-1135. Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Nickel Plated Brass Liquid Tight Strain Relief Fittings 90 Angled Elbow - PG & Metric Threads / Flange Part Numbers Cable Range -40F to 212F (-40C to 100C) w/ Mounting Flange Inches (mm) ED20MA-BR* ED20MR-BR* ED13AA-BR ED13AR-BR - ED20FA-BR ED20FR-BR .39 - .55 (10 - 14) .28 - .47 (7 - 12) .39 - .55 (10 - 14) .28 - .47 (7 - 12) .39 - .55 (10 - 14) .28 - .47 (7 - 12) Dimensions in Inches (mm) * RoHS A H B TL F Clearance Hole Body Height Body Length Thread Length Wrench Flats See page 56 for thread specs +.01" (+.25 mm) M20 X 1.5 .79 (20) 1.46 (37) 2.60 (66) .24 (6) .98 (25) PG 13 / 13.5 .80 (20.3) 1.46 (37) 2.60 (66) .24 (6) .98 (25) Flange .79 (20) 1.14 (29) 2.60 (66) _ .98 (25) B Nickel Plated Brass w/ Connection Threads Thread Type & Size H *Note: VDE Approval only applies to Fittings with Metric Threads. B A min. 0.04" x 45 (1 x 45) .13" (3.2) .98" (25) .78" (19.8) Robust - Compact - Low profile! H Secure your connection with these flange or threaded 90 Elbow Fittings. Saves Space and Time! Quick & Easy Installation: Insert cable into open 90 Elbow Fitting. Close fitting and secure with screws. Tighten dome nut for a liquid tight connection. -Done! .78" (19.8) F TL .78" (19.8) F A Suggested Clearance Hole for Non-Threaded Mounting Nickel Plated Brass Liquid Tight Strain Relief Fittings Clamp (Extra Pull-out Resistance) PG / NPT / Metric Threads Part Numbers Cable Range -40F to 212F (-40C to 100C) Inches (mm) Thread Type & Size Dimensions in Inches (mm) A B TL TL F1 F Clearance Hole Body Length Thread Length Thread Length Wrench Flats * Dome Fittings also available with the following approvals: See page 56 for thread specs +.01" (+.25 mm) Standard Elongated .49 (12.5) .60 (15.2) .73 (18.5) .80 (20.3) .89 (22.5) 1.12 (28.4) 1.47 (37.3) 1.85 (47) 1.02 (26) 1.10 (28) 1.18 (30) 1.30 (33) 1.30(33) 1.46 (37) 1.69 (43) 1.97 (50) .20 (5) .24 (6) .24 (6) .25 (6.5) .25 (6.5) .28 (7) .31 (8) .31 (8) .39 (10) .39 (10) .39 (10) .39 (10) .39 (10) .47 (12) .47 (12) .59 (15) .55 (14) .67 (17) .79 (20) .87 (22) .94 (24) 1.18 (30) 1.57 (40) 1.97 (50) PG 42 2.13 (54.1) 2.01 (51) .35 (9) .59 (15) 2.24 (57) Standard Elongated CD07AA-MZ CD09AA-MZ CD11AA-MZ CD13AA-MZ CD16AA-MZ CD21AR-MZ CD29AR-MZ CD36AA-MZ CD42AA-MZ CD42AR-MZ CD48AA-MZ CD48AR-MZ CD07CA-MZ CD09CA-MZ CD11CA-MZ CD13CA-MZ CD16CA-MZ CD21CR-MZ CD29CR-MZ CD36CA-MZ CD42CA-MZ CD42CR-MZ CD48CA-MZ CD48CR-MZ .12 - .26 (3 - 6.5) .16 - .31 (4 - 8) .24 - .39 (6 - 10) .24 - .47 (6 - 12) .39 - .55 (10 - 14) .51 - .71 (13 - 18) .71 - .98 (18 - 25) .87 - 1.26 (22 - 32) 1.26 - 1.50 (32 - 38) .98 - 1.22 (25 - 31) 1.46 - .73 (37 - 44) 1.14 - 1.38 (29 - 35) PG 7 PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 48 2.34 (59.4) 2.01 (51) .39 (10) .59 (15) 2.52 (64) CD09NA-MZ CD13NA-MZ CD21NA-MZ CD29NA-MZ - .16 - .31 (4 - 8) .28 - .47 (7 - 12) .51 - .71 (13 - 18) .71 - .98 (18 - 25) 3/8" NPT 1/2" NPT 3/4" NPT 1" NPT .68 (17.2) .83 (21.1) 1.05 (26.7) 1.35 (34.3) 1.10 (28) 1.30 (33) 1.46 (37) 1.69 (43) .59 (15) .51 (13) .51 (13) .75 (19) - .67 (17) / .75 (19) .87 (22) / .94 (24) 1.18 (30) 1.57 (40) CD12MA-MZ CD16MA-MZ CD17MA-MZ CD20MA-MZ CD22MA-MZ CD25MA-MZ CD32MA-MZ CD40MA-MZ CD50MA-MZ CD50MR-MZ CD63MA-MZ CD63MR-MZ CD12DA-MZ CD16DA-MZ CD17DA-MZ CD20DA-MZ CD22DA-MZ CD25DA-MZ CD32DA-MZ CD40DA-MZ CD50DA-MZ CD50DR-MZ CD63DA-MZ CD63DR-MZ .12 - .26 (3 - 6.5) .16 - .31 (4 - 8) .24 - .39 (6 - 10) .24 - .47 (6 - 12) .39 - .55 (10 - 14) .51 - .71 (13 - 18) .71 - .98 (18 - 25) .87 - 1.26 (22 - 32) 1.26 - 1.50 (32 - 38) .98 - 1.22 (25 - 31) 1.46 - .73 (37 - 44) 1.14 - 1.38 (29 - 35) M12 X 1.5 M16 X 1.5 M16 X 1.5 M20 X 1.5 M20 X 1.5 M25 X 1.5 M32 X 1.5 M40 X 1.5 .47 ( 12) .63 (16) .63 (16) .79 (20) .79 (20) .98 (25) 1.26 (32) 1.57 (40) 1.02 (26) 1.10 (28) 1.18 (30) 1.30 (33) 1.30(33) 1.46 (37) 1.69 (43) 1.97 (50) .26 (6.5) .24 (6) .24 (6) .24 (6) .24 (6) .28 (7) .31 (8) .31 (8) .39 (10) .39 (10) .39 (10) .39 (10) .39 (10) .47 (12) .47 (12) .59 (15) .55 (14) .67 (17) / .75 (19) .79 (20) .87 (22) .94 (24) 1.18 (30) 1..57 (40) 1.97 (50) M50 X 1.5 1.97 (50) 2.01 (51) .35 (9) .59 (15) 2.24 (57) M63 X 1.5 2.48 (63) 2.01 (51) .39 (10) .59 (15) 2.52 (64) / 2.68 (68) *Note: VDE Approval only applies to Standard Fittings with Metric Threads. RoHS www.SealconEX.com High Performance Strain Relief Clamp Fittings Provides Extra Pull-out Resistance. Standard O-Ring A Suggested Clearance Hole for Non-Threaded Mounting Screw Clamp www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice F1/F B TL 17 Nickel Plated Brass Liquid Tight Strain Relief Fittings EMI / RFI Proof - Product Features RoHS Nickel Plated Brass EMI (Electromagnetic Interference) / RFI (Radio Frequency Interference) is an unwanted disturbance that affects an electrical circuit due to either electromagnetic conduction or electromagnetic radiation emitted from an external source. The disturbance may interrupt, obstruct, or otherwise limit the effective performance of the circuit. These Liquid Tight EMI / RFI - Proof Grounded Strain Relief Fittings made of Nickel Plated Brass are the perfect answer to stringent requirements for reliable grounding * and protection from electromagnetic interference. Two styles are available: Standard and Feed-Through. Standard (-BE) The Standard version has an integral O-Ring, which presses the braiding against the inside wall of the body but can only be used with BRAIDED shield. Overlapping clamping splines apply a concentric force, thereby preventing the form seal from being pulled out of the fitting. This ensures pull-out protection without damage to the cable. The patented internal sealing edge results in a superior seal between the splined Nylon clamping insert and Nickel Plated Brass body. Patented 360 grounding due to the internal O-Ring, which ensures perfect contact between braided shield of cable and fitting. Feed-Through works well with FOIL or BRAIDED shield and provides reliable grounding by means of metalized spring fingers. FeedThrough (-FE) Overlapping clamping splines apply a concentric force, thereby preventing the form seal from being pulled out of the fitting. This ensures pull-out protection without damage to the cable. Our Metal-coated Nylon splines provides the higest electrical conductivity ratings in the industry. Flexible contact points allow contact with variable braid and foil cable diameters and adds additional strain relief to a solution. Dome Fittings also available with the following approvals: www.SealconEX.com 18 www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Nickel Plated Brass Liquid Tight Strain Relief Fittings EMI / RFI Proof - Applications & Assembly EMI/RFI Proof Strain Relief Fittings Applications: * Telecommunication * Control panels RoHS * Measuring, control and feedback systems * Traffic, etc. Dome Fittings also available with the following approvals: * * * * Nickel Plated Brass Also used in all areas where in addition to a reliable liquid tight seal, high pull-out resistance and anti-rotation provisions, a dependable contact with the cable shield is required. www.SealconEX.com Halogen and Phosphorous-Free / Non-Toxic Fire Protection Class V0 According to UL 94 Liquid Tight per NEMA 4x & 6 to 150 PSIG (IP 68 to 10 bar) Quick Assembly and Reliable Grounding of Braid or Foil Shielded Cables To ensure a good ground connection between the Cord Grip and a Metal Enclosure, we strongly recommend the use of EMI/RFI Locking Nuts (Page 30) for non-threaded mounting. These Locking Nuts have cutting edges which will slice through paint coatings on a metal enclosure to ensure grounding (Page 30). Also, these Locking Nuts are suitable for vibrating applications. EMI/RFI Locking Nuts with Cutting Edges Assembly Instructions Standard (-BE) Step 1 * Strip cable * Expose braided shield Feed-Through (-FE) Option 1 - Partial Jacket Stripping: * Expose shield approximately 7/16" (10 mm) * Insert cable into fitting until the foil or braid reaches the contact position * Tighten the dome nut * Finished Step 2 Option 2 - Total Jacket Removed: Step 3 Option 3 - Fold Shield over Jacket: * Feed cable through dome nut & clamping insert * Fold braided shield back over O-Ring on clamping insert * Make sure that braided shield overlaps the O-ring by 3/32" (2 mm) only * Push clamping insert into body * Tighten dome nut * Finished * Remove cable jacket to expose the braid or foil Insert cable into fitting until the braid reaches the contact point * Tighten the dome nut * Finished * Strip cable jacket & braiding to different lengths * For smaller cable diameters fold the braided shield back over the cable jacket * Insert cable into fitting until the braid reaches the contact point * Tighten the dome nut * Finished Questions or concerns? - Please call our well-trained Inside Technical Sales Department (800) 456-9012 or (303) 699-1135. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 19 Nickel Plated Brass Liquid Tight Strain Relief Fittings EMI / RFI Proof - PG / NPT / Metric & Elongated * RoHS EMI/RFI Ground Proof: Standard Version (-BE) Part Numbers Thread Type & Size Cable Range Nickel Plated Brass -40F to 212F (-40C to 100C) Dome Standard Flex Standard Dome Elongated CD07AA-BE CD07AR-BE CD09AA-BE CD09AR-BE CD11AA-BE CD11AR-BE CD13AA-BE CD13AR-BE CD16AA-BE CD16AR-BE CD21AA-BE CD21AR-BE CD29AA-BE CD29AR-BE CD36AA-BE CD36AR-BE CD42AA-BE CD42AR-BE CD48AA-BE CD48AR-BE CF07AA-BE CF07AR-BE CF09AA-BE CF09AR-BE CF11AA-BE CF11AR-BE CF13AA-BE CF13AR-BE CF16AA-BE CF16AR-BE CF21AA-BE CF21AR-BE - CD07CA-BE CDO7CR-BE CD09CA-BE CD09CR-BE CD11CA-BE CD11CR-BE CD13CA-BE CD13CR-BE CD16CA-BE CD16CR-BE CD21CA-BE CD21CR-BE CD29CA-BE CD29CR-BE CD36CA-BE CD36CR-BE CD42CA-BE CD42CR-BE CD48CA-BE CD48CR-BE CD09NA-BE CD09NR-BE CD13NA-BE CD13NR-BE CD21NA-BE CD21NR-BE CF09NA-BE CF09NR-BE CF13NA-BE CF13NR-BE CF21NA-BE CF21NR-BE - CD12MA-BE CD12MR-BE CD16MA-BE CD16MR-BE CD20MA-BE CD20MR-BE CD25MA-BE CD25MR-BE CD32MA-BE CD32MR-BE CD40MA-BE CD40MR-BE CD50MA-BE CD50MR-BE CD63MA-BE CD63MR-BE CF12MA-BE CF12MR-BE CF16MA-BE CF16MR-BE CF20MA-BE CF20MR-BE CF25MA-BE CF25MR-BE - CD12DA-BE CD12DR-BE CD16DA-BE CD16DR-BE CD20DA-BE CD20DR-BE CD25DA-BE CD25DR-BE CD32DA-BE CD32DR-BE CD40DA-BE CD40DR-BE Available Available Available Available Flex Elongated Inches (mm) .12 - .26 (3 - 6.5) CF07CA-BE .08 - .20 (2 - 5) CFO7CR-BE .16 - .31 (4 - 8) CF09CA-BE .08 - .24 (2 - 6) CF09CR-BE .20 - .39 (5 - 10) CF11CA-BE .12 - .28 (3 - 7) CF11CR-BE .24 - .47 (6 - 12) CF13CA-BE .20 - .35 (5 - 9) CF13CR-BE CF16CA-BE .39 - .55 (10 - 14) .28 - .47 (7 -12) CF16CR-BE CF21CA-BE .51 - .71 (13 - 18) .35 - .63 (9 - 16) CF21CR-BE .71 - .98 (18 - 25) .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) .98 - 1.22 (25 - 31) 1.46 - .73 (37 - 44) 1.14 - 1.38 (29 - 35) - .16 - .31 (4 - 8) .08 - .20 (2 - 6) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .51 - .71 (13 - 18) .35 - .63 (9 -16) .12 - .26 (3 - 6.5) CF12DA-BE .08 - .20 (2 - 5) CF12DR-BE .20 - .39 (5 - 10) CF16DA-BE .12 - .28 (3 - 7) CF16DR-BE CF20DA-BE .39 - .55 (10 - 14) .28 - .47 (7 - 12) CF20DR-BE CF25DA-BE .51 - .71 (13 - 18) .35 - .63 (9 - 16) CF25DR-BE .71 - .98 (18 - 25) .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) .98 - 1.22 (25 - 31) 1.46 - .73 (37 - 44) 1.14 - 1.38 (29 - 35) - *Note: UL, UR & CSA Approval applies to Dome Fittings. Standard (-BE) Flex Top 20 Dimensions in Inches (mm) A B C TL TL F1 F Clearance Hole Body Length (Dome) Body Length (Flex) Thread Length Thread Length Wrench Flats Standard Elongated See Page 56 for thread specs +.01" (+.25 mm) PG 7 / 1/4" NPT .49 (12.5) .75 (19) 2.17 (55) .20 (5) .39 (10) .55 (14) PG 9 .60 (15.2) .83 (21) 2.60 (66) .24 (6) .39 (10) .67 (17) PG 11 .73 (18.5) .87 (22) 3.03 (77) .24 (6) .39 (10) .79 (20) PG 13 / 13.5 .80 (20.3) .94 (24) 3.46 (88) .26 (6.5) .39 (10) .87 (22) PG 16 .89 (22.5) .91 (23) 3.86 (98) .26 (6.5) .39 (10) .94 (24) PG 21 1.12 (28.4) .94 (24) 4.37 (111) .28 (7) .47 (12) 1.18 (30) PG 29 1.47 (37.3) 1.14 (29) - .31 (8) .47 (12) 1.57 (40) PG 36 1.85 (47) 1.38 (35) - .31 (8) .59 (15) 1.97 (50) PG 42 2.13 (54.1) 1.46 (37) - .35 (9) .59 (15) 2.24 (57) PG 48 2.34 (59.4) 1.50 (38) - .39 (10) .59 (15) 2.52 (64) 3/8" NPT .68 (17.2) .83 (21) 2.60 (66) .59 (15) - .67 (17) / .75 (19) 1/2" NPT .83 (21.1) .94 (24) 3.46 (88) .51 (13) - .87 (22) / .94 (24) 3/4" NPT 1.05 (26.7) .98 (25) 4.37 (111) .51 (13) - 1.18 (30) M12 X 1.5 .47 ( 12) .75 (19) 2.17 (55) .26 (6.5) .39 (10) .55 (14) M16 X 1.5 .63 (16) .87 (22) 3.03 (77) .24 (6) .39 (10) .79 (20) M20 X 1.5 .79 (20) .94 (24) 3.86 (98) .24 (6) .39 (10) .94 (24) M25 X 1.5 .98 (25) 1.02 (25) 4.37 (111) .28 (7) .47 (12) 1.18 (30) M32 X 1.5 1.26 (32) 1.22 (31) - .31 (8) .47 (12) 1.57 (40) M40 X 1.5 1.57 (40) 1.46 (37) - .31 (8) .59 (15) 1.97 (50) M50 X 1.5 1.97 (50) 1.46 (37) - .35 (9) .59 (15) 2.24 (57) M63 X 1.5 2.48 (63) 1.50 (38) - .39 (10) .59 (15) 2.52 (64) / 2.68 (68) *Note: VDE Approval only applies to Dome Fittings with Metric Threads. EMI/RFI Fittings are also available with High Performance Dome Fittings also available Clamp or in Stainless Steel. For inquiries - please call our with the following approvals: Clamp Top Inside Technical Sales Department (800) 456-9012 or (303) 699-1135. www.SealconEX.com www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Nickel Plated Brass Liquid Tight Strain Relief Fittings EMI / RFI Proof - PG / NPT / Metric & Elongated RoHS EMI/RFI Ground Proof: Feed-Through Version (-FE) Part Numbers -40F to 212F (-40C to 100C) Dimensions in Inches (mm) A B TL TL F1 F Clearance Hole Body Length Thread Length Thread Length Wrench Flats Inches (mm) See page 56 for thread specs +.01" (+.25 mm) Standard Elongated CD07AA-FE CD09AA-FE CD11AA-FE CD13AA-FE CD16AA-FE CD21AA-FE CD29AA-FE CD36AA-FE CD42AA-FE CD48AA-FE Elongated - .12 - .26 (3 - 6.5) .16 - .31 (4 - 8) .20 - .39 (5 - 10) .24 - .47 (6 - 12) .39 - .55 (10 - 14) .51 - .71 (13 - 18) .71 - .98 (18 - 25) .94 - 1.26 (24 - 32) 1.26 - 1.50 (32 - 38) 1.46 - 1.73 (37 - 44) PG 7 / 1/4" NPT PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48 .49 (12.5) .60 (15.2) .73 (18.5) .80 (20.3) .88 (22.5) 1.12 (28.4) 1.47 (37.3) 1.85 (47) 2.13 (54.1) 2.34 (59.4) .94 (24) 1.10 (28) 1.14 (29) 1.22 (31) 1.26(32) 1.50 (38) 1.69 (43) 1.89 (48) 1.77 (45) 1.81 (46) .20 (5) .24 (6) .24 (6) .26 (6.5) .26 (6.5) .28 (7) .31 (8) .31 (8) .35 (9) .39 (10) - .55 (14) .67 (17) .79 (20) .87 (22) .94 (24) 1.18 (30) 1.57 (40) 1.97 (50) 2.24 (57) 2.52 (64) CD09NA-FE CD13NA-FE CD21NA-FE - .16 - .31 (4 - 8) .24 - .47 (6 - 12) .51 - .71 (13 - 18) 3/8" NPT 1/2" NPT 3/4" NPT .68 (17.2) .83 (21.1) 1.05 (26.7) 1.14 (29) 1.28 (32.5) 1.54 (39) .59 (15) .51 (13) .51 (13) - .67 (17) / .75 (19) .87 (22) / .94 (24) 1.18 (30) CD12MA-FE CD16MA-FE CD16MR-FE CD20MA-FE CD20MR-FE CD25MA-FE CD32MA-FE CD40MA-FE CD50MA-FE CD63MA-FE CD12DA-FE CD16DA-FE CD16DR-FE CD20DA-FE CD20DR-FE CD25DA-FE CD32DA-FE CD40DA-FE CD50DA-FE CD63DA-FE .12 - .26 (3 - 6.5) .20 - .39 (5 - 10) .16 - .31 (4 - 8) .39 - .55 (10 - 14) .24 - .47 (6 -12) .51 - .71 (13 - 18) .71 - .98 (18 - 25) .94 - 1.26 (24 - 32) 1.26 - 1.50 (32 - 38) 1.46 - 1.73 (37 - 44) M12 X 1.5 M16 X 1.5 M16 X 1.5 M20 X 1.5 M20 X 1.5 M25 X 1.5 M32 X 1.5 M40 X 1.5 M50 X 1.5 M63 X 1.5 .47 ( 12) .63 (16) .63 (16) .79 (20) .79 (20) .98 (25) 1.26 (32) 1.57 (40) 1.97 (50) 2.48 (63) .98 (25) 1.26 (32) 1.14 (29) 1.30 (33) 1.28 (32.5) 1.54 (39) 1.77 (45) 2.01 (51) 2.24 (57.5) 2.05 (52) .26 (6.5) .24 (6) .24 (6) .24 (6) .24 (6) .28 (7) .31 (8) .31 (8) .35 (9) .39 (10) .39 (10) .39 (10) .39 (10) .39 (10) .39 (10) .47 (12) .47 (12) .59 (15) .59 (15) .59 (15) .55 (14) .79 (20) .67 (17) / .75 (19) .94 (24) .87 (22) 1.18 (30) 1.57 (40) 1.97 (50) 2.24 (57) 2.52 (64) / 2.68 (68) Standard Nickel Plated Brass Thread Type & Size Cable Range F1/F Feed-Through (-FE) Feed-Through Products are Quick, Reliable & Labor Saving! Partial Jacket Stripping B Total Jacket Removal Metalized Finger for additional EMI Shielding. A TL Suggested Clearance Hole for Non-Threaded Mounting Dome Fittings also available with the following approvals: Fold Shield Over Jacket Use our recommeneded EMI Locking Nuts with cutting edges which will cut through paint to ensure proper grounding (see page 30). Also, these Locking Nuts are suitable for vibrating applications. www.SealconEX.com Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 21 Nickel Plated Brass Liquid Tight Strain Relief Fittings Multi-Hole - PG Threads * * RoHS Part Numbers Nickel Plated Brass -40F to 212F (-40C to 100C) Flex** See page 56 for thread specs CD07AP-BR CF07AP-BR PG 7 / 1/4" NPT CD09A1-BR CD09A2-BR CD09A3-BR CD09A4-BR CD09A5-BR CD09A6-BR CD09A7-BR CF09A1-BR CF09A2-BR CF09A3-BR CF09A4-BR CF09A5-BR CF09A6-BR CF09A7-BR CD09A8-BR CD09A9-BR CD09AP-BR CF09A8-BR CF09A9-BR CF09AP-BR CD11A1-BR CD11A2-BR CD11A3-BR CD11A4-BR CD11A5-BR CD11AP-BR CF11A1-BR CF11A2-BR CF11A3-BR CF11A4-BR CF11A5-BR CF11AP-BR CD13A1-BR CD13A2-BR CD13A3-BR CD13A4-BR CD13A5-BR CD13A6-BR CD13A7-BR CD13A8-BR CD13A9-BR CD13AP-BR CF13A1-BR CF13A2-BR CF13A3-BR CF13A4-BR CF13A5-BR CF13A6-BR CF13A7-BR CF13A8-BR CF13A9-BR CF13AP-BR CD16A1-BR CD16A2-BR CD16A3-BR CD16A4-BR CD16A5-BR CD16A6-BR CD16A7-BR CD16A8-BR CD16A9-BR CD16A0-BR CD16AP-BR CF16A1-BR CF16A2-BR CF16A3-BR CF16A4-BR CF16A5-BR CF16A6-BR CF16A7-BR CF16A8-BR CF16A9-BR CF16A0-BR CF16AP-BR Dome Dimensions in Inches (mm) Diameter of Part Holes Numbers of Inserts Only Thread Type & Size PG 9 No. of Holes mm Solid Insert Solid Insert 1.4 4 3.0 2 1.6 5 1.7 2 1.4 10 1.4 6 1.7 3 1.7 4 2.3 4 Inches 1.089.0799.19 PG 11 3.0 3.0 4.0 1.5 2.8 PG 13 / 13.5 3 6 3 2 3 2 2 2 2 PG 16 3.0 4.0 4.0 4.0 4.0 6.0 5.6 3.0 3.0 3.8 Solid Insert 22 Flex** Flex CD21A1-BR CD21A2-BR CD21A3-BR CD21A4-BR CD21A5-BR CD21A6-BR CD21A7-BR CD21A8-BR CD21A9-BR CD21AP-BR CF21A1-BR CF21A2-BR CF21A3-BR CF21A4-BR CF21A5-BR CF21A6-BR CF21A7-BR CF21A8-BR CF21A9-BR CF21AP-BR CD29A1-BR CD29A2-BR CD29A3-BR CD29A9-BR CD29AP-BR - CD36A1-BR CD36A2-BR CD36A3-BR CD36A4-BR CD36AP-BR - PG 36 CD42A1-BR CD42AP-BR - PG 42 CD48A1-BR CD48A2-BR CD48A3-BR CD48AP-BR - No. of Holes 4 3 2 4 1 4 3 4/1 2 mm Inches .24 6.0 .28 7.0 .31 8.0 .20 5.0 .31 8.0 .20 5.2 .20 5.2 5.2 / 3.7 .20 /.15 .29 7.4 1.089.2100.19 1.089.2101.19 1.089.2102.19 1.089.2103.19 1.089.2104.19 1.089.2105.19 1.089.2106.19 1.089.2107.19 1.089.2108.19 1.089.2199.19 1.089.1100.19 1.089.1101.19 1.089.1102.19 1.089.1103.19 1.089.1104.19 1.089.1199.19 .08 .12 .16 .20 .12 .20 .15 .17 .10 1.089.1300.19 1.089.1301.19 1.089.1302.19 1.089.1303.19 1.089.1304.19 1.089.1305.19 1.089.1306.19 1.089.1307.19 1.089.1308.19 1.089.1399.19 .12 .16 .16 .16 .16 .24 .22 .12 .12 .15 1.089.1600.19 Part Numbers Thread Dimensions in Inches (mm) 1.089.1601.19 Type -40F to 212F Cable Diameter Part 1.089.1602.19 (-40C to 100C) & Size Numbers 1.089.1603.19 of 1.089.1604.19 Inserts See page Only 1.089.1605.19 56 for thread 1.089.1606.19 specs mm Inches 1.089.1607.19 5.7 .23 *1.089.1610.19 1.089.16C-06 CD16AK-BR PG 16 1.089.1909.19 6.9 .27 CD16AJ-BR 1.089.16C-07 1.089.1699.19 *Note: RJ45 Solution has no approval ratings. Reference Diagram on page 24. *Note: This Insert has slotted holes. **Note: Flex Fittings are not a standard item, assembly required. *Note: CSA and CE Approvals only applies to Dome Fittings. Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. Dome .12 .12 .16 .06 .11 Solid Insert 3 3 4 5 6 2 3 6 *4 6 See page 56 for thread specs Dimensions in Inches (mm) Diameter of Part Holes Numbers of Inserts Only 1.089.0900.19 1.089.0901.19 1.089.0902.19 1.089.0903.19 1.089.0904.19 1.089.0905.19 1.089.0906.19 1.089.0907.19 1.089.0908.19 1.089.0999.19 Solid Insert 2.0 3.0 4.0 5.0 3.0 5.2 3.8 4.2 2.5 Thread Type & Size .06 .12 .06 .07 .06 .06 .07 .07 .09 Solid Insert 2 3 2 3 4 Part Numbers -40F to 212F (-40C to 100C) Dome Fittings also available with the following approvals: www.SealconEX.com PG 21 Solid Insert PG 29 6 4 4 2 6.5 9.0 9.5 11.0 .26 .35 .37 .43 1.089.2900.19 1.089.2901.19 1.089.2902.19 1.089.2908.19 1.089.2999.19 Solid Insert PG 48 5 7 6 2 9.0 9.0 8.0 15.0 Solid Insert .35 .35 .31 .59 1.089.3600.19 1.089.3601.19 1.089.3602.19 1.089.3603.19 1.089.3699.19 3 14.0 .55 Solid Insert 1.089.4203.19 1.089.4299.19 8 6 3 .39 10.0 .47 12.0 .71 18.0 Solid Insert 1.089.4800.19 1.089.4801.19 1.089.4802.19 1.089.4899.19 RJ45 Solution For Strain Relief Fitting specifications and dimensions refer to page 14. For Material Specifications and Approval Information refer to page 52. Solid Plug can be customized! Multi-Hole Inserts are available in Silicone and FKM upon request. "BP" (Billet Plugs) available. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Nickel Plated Brass Liquid Tight Strain Relief Fittings Multi-Hole - NPT Threads * * RoHS Part Numbers -40F to 212F (-40C to 100C) Thread Type & Size CD07AP-BR CD07AP-BR PG 7 / 1/4" NPT CD09N1-BR CD09N2-BR CD09N3-BR CD09N4-BR CD09N5-BR CD09N6-BR CD09N7-BR CD09N8-BR CD09N9-BR CD09NP-BR CF09N1-BR CF09N2-BR CF09N3-BR CF09N4-BR CF09N5-BR CF09N6-BR CF09N7-BR CF09N8-BR CF09N9-BR CF09NP-BR CD13N1-BR CD13N2-BR CD13N3-BR CD13N4-BR CD13N5-BR CD13N6-BR CD13N7-BR CD13N8-BR CD13N9-BR CD13NP-BR CF13N1-BR CF13N2-BR CF13N3-BR CF13N4-BR CF13N5-BR CF13N6-BR CF13N7-BR CF13N8-BR CF13N9-BR CF13NP-BR CD16N1-BR CD16N2-BR CD16N3-BR CD16N4-BR CD16N5-BR CD16N6-BR CD16N7-BR CD16N8-BR CD16N9-BR CD16N0-BR CD16NP-BR CF16N1-BR CF16N2-BR CF16N3-BR CF16N4-BR CF16N5-BR CF16N6-BR CF16N7-BR CF16N8-BR CF16N9-BR CF16N0-BR CF16NP-BR Dome 3/8" NPT Diameter of Holes No. of Holes mm Solid Insert Solid Insert 1.4 4 3.0 2 1.6 5 1.7 2 1.4 10 1.4 6 17 3 1.7 4 2.3 4 Inches 1.089.0799.19 1/2" NPT 2.0 3.0 4.0 5.0 3.0 5.2 3.8 4.2 2.5 1/2" NPT (Enlarged) 3.0 4.0 4.0 4.0 4.0 6.0 5.6 3.0 3.0 3.8 Solid Insert CD21N1-BR CD21N2-BR CD21N3-BR CD21N4-BR CD21N5-BR CD21N6-BR CD21N7-BR CD21N8-BR CD21N9-BR CD21NP-BR CF21N1-BR CF21N2-BR CF21N3-BR CF21N4-BR CF21N5-BR CF21N6-BR CF21N7-BR CF21N8-BR CF21N9-BR CF21NP-BR CD29N1-BR CD29N2-BR CD29N3-BR CD29N9-BR CD29NP-BR - Diameter of Holes No. of Holes 4 3 2 4 1 4 3 4/1 2 mm Part Numbers of Inserts Only Inches .24 1.089.2100.19 6.0 .28 1.089.2101.19 7.0 .31 1.089.2102.19 8.0 .20 1.089.2103.19 5.0 .31 1.089.2104.19 8.0 .20 1.089.2105.19 5.2 .20 1.089.2106.19 5.2 5.2/3.7 .20/.15 1.089.2107.19 .29 1.089.2108.19 7.4 1.089.2199.19 Solid Insert 1.089.1300.19 1.089.1301.19 1.089.1302.19 1.089.1303.19 1.089.1304.19 1.089.1305.19 1.089.1306.19 1.089.1307.19 1.089.1308.19 1.089.1399.19 .12 .16 .16 .16 .16 .24 .22 .12 .12 .15 1.089.1600.19 mm Inches 1.089.1601.19 5.7 .23 1.089.16C-06 CD16NK-BR 1.089.1602.19 1/2" 1/2" NPT NPT CD16NJ-BR 6.9 .27 1.089.16C-07 1.089.1603.19 *Note: RJ45 Solution has no approval ratings. Reference Diagram on page 24. 1.089.1604.19 1.089.1605.19 Custom Solutions! 1.089.1606.19 * Any custom hole configuration is available for a minimum 1.089.1607.19 order of 1,000 pieces. *1.089.1610.19 * No charge for standard delivery time. 1.089.1909.19 For small quantities we suggest drilling or machining the 1.089.1699.19 inserts yourself, following these guidelines: For Strain Relief Fitting specifications and dimensions refer to page 14. For Material Specifications and Approval Information refer to page 52. "BP" (Billet Plugs) available upon request. www.SealconEX.com Flex** See page 56 for thread specs Dimensions in Inches (mm) .08 .12 .16 .20 .12 .20 .15 .17 .10 *Note: This Insert has slotted holes. **Note: Flex Fittings are not a standard item, assembly required. *Note: CSA and CE Approvals only applies to Dome Fittings. Dome Fittings also available with the following approvals: Dome Thread Type & Size 1.089.0900.19 1.089.0901.19 1.089.0902.19 1.089.0903.19 1.089.0904.19 1.089.0905.19 1.089.0906.19 1.089.0907.19 1.089.0908.19 1.089.0999.19 Solid Insert 3 3 4 5 6 2 3 6 *4 6 Part Numbers -40F to 212F (-40C to 100C) .06 .12 .06 .07 .06 .06 .07 .07 .09 Solid Insert 3 6 3 2 3 2 2 2 2 Part Numbers of Inserts Only Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. 3/4" NPT 1" NPT 6 4 4 2 6.5 9.0 9.5 11.0 .26 .35 .37 .43 Solid Insert 1.089.2900.19 1.089.2901.19 1.089.2902.19 1.089.2908.19 1.089.2999.19 RJ45 Solution Part Numbers Thread Type -40F to 212F (-40C to 100C) & Size See page 56 for thread specs Dimensions in Inches (mm) Cable Diameter Part Numbers of Inserts Only * We suggest freezing the solid insert before drilling. * Drill holes with insert installed in Strain Relief Fitting as a fixture. * Drill holes by using a standard high-speed steel drill bit of the proper size at approx. 2500 RPM. * Keep a minimum distance of 1 mm (.04 in) between holes. * The outside holes can be located right against the lip of the strain relief body, as sufficient insert material remains between the hole and the body wall due to the design of the cord grip. Important: Design Parameters: Cable diameter should not be less than 80% of hole diameter and the difference between hole and cable diameter should never exceed .04" (1 mm). The Multi Cable fittings will meet NEMA 4x = IP 65 if the design parameters are complied with. To verify a submersible NEMA 6= IP 68 application, the final assembly of cables and fittings must be tested by the customer or submitted at the customer's expense to an independent test lab. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 23 Nickel Plated Brass Flex** See page 56 for thread specs Dimensions in Inches (mm) Nickel Plated Brass Liquid Tight Strain Relief Fittings Multi-Hole - Metric Threads * * RoHS Part Numbers Nickel Plated Brass -40F to 212F (-40C to 100C) Dome Flex** CD12MP-BR CF12MP-BR CD16M1-BR CD16M2-BR CD16M3-BR CD16M4-BR CD16M5-BR CD16M6-BR CD16M7-BR CD16M8-BR CD16M9-BR CD16MP-BR CF16M1-BR CF16M2-BR CF16M3-BR CF16M4-BR CF16M5-BR CF16M6-BR CF16M7-BR CF16M8-BR CF16M9-BR CF16MP-BR CD17M1-BR CD17M2-BR CD17M3-BR CD17M4-BR CD17M5-BR CD17MP-BR CF17M1-BR CF17M2-BR CF17M3-BR CF17M4-BR CF17M5-BR CF17MP-BR CD20M1-BR CD20M2-BR CD20M3-BR CD20M4-BR CD20M5-BR CD20M6-BR CD20M7-BR CD20M8-BR CD20M9-BR CD20MP-BR CF20M1-BR CF20M2-BR CF20M3-BR CF20M4-BR CF20M5-BR CF20M6-BR CF20M7-BR CF20M8-BR CF20M9-BR CF20MP-BR CD22M1-BR CD22M2-BR CD22M3-BR CD22M4-BR CD22M5-BR CD22M6-BR CD22M7-BR CD22M8-BR CD22M9-BR CD22M0-BR CD22MP-BR CF22M1-BR CF22M2-BR CF22M3-BR CF22M4-BR CF22M5-BR CF22M6-BR CF22M7-BR CF22M8-BR CF22M9-BR CF22M0-BR CF22MP-BR Thread Type & Size See page 56 for thread specs M12 X 1.5 M16 X 1.5 Dimensions in Inches (mm) Diameter of Holes No. of Holes mm Solid Insert Solid Insert 1.4 4 3.0 2 1.6 5 1.7 2 1.4 10 1.4 6 1.7 3 1.7 4 2.3 4 M16 X 1.5 (Enlarged) 3.0 3.0 4.0 1.5 2.8 1.089.0799.19 .06 .12 .06 .07 .06 .06 .07 .07 .09 1.089.0900.19 1.089.0901.19 1.089.0902.19 1.089.0903.19 1.089.0904.19 1.089.0905.19 1.089.0906.19 1.089.0907.19 1.089.0908.19 1.089.0999.19 .12 .12 .16 .06 .11 1.089.1100.19 1.089.1101.19 1.089.1102.19 1.089.1103.19 1.089.1104.19 1.089.1199.19 Solid Insert M20 X 1.5 M20 X 1.5 (Enlarged) Part Numbers of Inserts Only Inches Solid Insert 2 3 2 3 4 Part Numbers Thread Type & Size -40F to 212F (-40C to 100C) Dome Flex** CD25M1-BR CD25M2-BR CD25M3-BR CD25M4-BR CD25M5-BR CD25M6-BR CD25M7-BR CD25M8-BR CD25M9-BR CD25MP-BR CF25M1-BR CF25M2-BR CF25M3-BR CF25M4-BR CF25M5-BR CF25M6-BR CF25M7-BR CF25M8-BR CF25M9-BR CF25MP-BR CD32M1-BR CD32M2-BR CD32M3-BR CD32MP-BR - CD40M1-BR CD40M2-BR CD40M3-BR CD40M4-BR CD40MP-BR - See page 56 for thread specs M25 X 1.5 M32 X 1.5 M40 X 1.5 Dimensions in Inches (mm) Diameter of Part Holes Numbers of Inserts Only No. of Holes 4 3 2 4 1 4 3 4/1 2 mm Inches .24 1.089.2100.19 6.0 .28 1.089.2101.19 7.0 .31 1.089.2102.19 8.0 .20 1.089.2103.19 5.0 .31 1.089.2104.19 8.0 .20 1.089.2105.19 5.2 .20 1.089.2106.19 5.2 5.2/3.7 .20/.15 1.089.2107.19 .29 1.089.2108.19 7.4 1.089.2199.19 Solid Insert 6 4 4 6.5 .26 9.0 .35 9.5 .37 Solid Insert 1.089.2900.19 1.089.2901.19 1.089.2902.19 1.089.2908.19 5 7 6 2 9.0 9.0 8.0 15.0 Solid Insert .35 .35 .31 .59 1.089.3600.19 1.089.3601.19 1.089.3602.19 1.089.3603.19 1.089.3699.19 14.0 .55 1.089.4203.19 3 6 3 2 3 2 2 2 2 2.0 3.0 4.0 5.0 3.0 5.2 3.8 4.2 2.5 Solid Insert .08 .12 .16 .20 .12 .20 .15 .17 .10 1.089.1300.19 1.089.1301.19 1.089.1302.19 1.089.1303.19 1.089.1304.19 1.089.1305.19 1.089.1306.19 1.089.1307.19 1.089.1308.19 1.089.1399.19 3 3 4 5 6 2 3 6 *4 6 3.0 4.0 4.0 4.0 4.0 6.0 5.6 3.0 3.0 3.8 Solid Insert .12 .16 .16 .16 .16 .24 .22 .12 .12 .15 1.089.1600.19 Type -40F to 212F Cable Diameter Part 1.089.1601.19 (-40C to 100C) & Size Numbers 1.089.1602.19 of Inserts 1.089.1603.19 See page Only 56 for 1.089.1604.19 thread 1.089.1605.19 specs mm Inches 1.089.1606.19 CD22MK-BR 5.7 .23 1.089.16C-06 M20 X 1.5 1.089.1607.19 CD22MJ-BR (Enlarged) 6.9 .27 1.089.16C-07 *1.089.1610.19 1.089.1909.19 *Note: RJ45 Solution has no approval ratings. Reference Diagram below. 1.089.1699.19 Dome Opening *Note: This Insert has slotted holes. **Note: Flex Fittings are not a standard item, assembly required. *Note: CSA and CE Approvals only applies to Dome Fittings. CD50M1-BR - CD50MP-BR - CD63M1-BR CD63M2-BR CD63M3-BR CD63MP-BR - M50 X 1.5 M63 X 1.5 3 8 6 3 Solid Insert 1.089.4299.19 .39 10.0 .47 12.0 .71 18.0 Solid Insert 1.089.4800.19 1.089.4801.19 1.089.4802.19 1.089.4899.19 RJ45 Solution Part Numbers Thread Dimensions in Inches (mm) Insert Strain Relief Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. 24 Dome Fittings also available with the following approvals: www.SealconEX.com Dome Nut Any Connector For Material Specifications and Approval Information refer to page 52. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice PVDF Liquid Tight Strain Relief Fittings High / Low Temp. Chem. Resistant - PG / NPT / Metric * * * * * RoHS Typical Application: PVDF Body w/ FKM Insert: High/Low Temperature & Chemical Resistant Part Numbers Cable Range Dome Flex Inches (mm) CD07AA-TE CD07AR-TE CD09AA-TE CD09AR-TE CD11AA-TE CD11AR-TE CD13AA-TE CD13AR-TE CD16AA-TE CD16AR-TE CD21AA-TE CD21AR-TE CD29AA-TE CD29AR-TE CD36AA-TE CD36AR-TE CD42AA-TE CD42AR-TE CD48AA-TE CD48AR-TE CF07AA-TE CF07AR-TE - .12 - .26 (3 - 6.5) .08 - .20 (2 - 5) .16 - .31 (4 - 8) .08 - .24 (2 - 6) .20 - .39 (5 - 10) .12 - .28 (3 - 7) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .28 - .47 (7-12) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) .98 - 1.22 (25 - 31) 1.46 - .73 (37 - 44) 1.14 - 1.38 (29 - 35) CD09NA-TE CD09NR-TE CD13NA-TE CD13NR-TE CD16NA-TE CD16NR-TE CD21NA-TE CD21NR-TE - .16 - .31 (4 - 8) .08 - .24 (2 - 6) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .28 - .47 (7-12) .51 - .71 (13 - 18) .35 - .63 (9 - 16) CD12MA-TE CD12MR-TE CD16MA-TE CD16MR-TE CD20MA-TE CD20MR-TE CD25MA-TE CD25MR-TE CD32MA-TE CD32MR-TE CF12MA-TE CF12MR-TE - .12 - .26 (3 - 6.5) .08 - .20 (2 - 5) .16 - .31 (4 - 8) .08 - .24 (2 - 6) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) Thread Type & Size Dimensions in Inches (mm) A B C TL F1 F Clearance Hole Body Length (Dome) Body Length (Flex) Thread Length Wrench Flats See page 56 for thread specs +.01" (+.25 mm) PG 7 / 1/4" NPT .49 (12.5) .83 (21) 2.13 (54) .31 (8) .59 (15) PG 9 .60 (15.2) .87 (22) 2.48 (66) .31 (8) .75 (19) PG 11 .73 (18.5) .98 (25) - .31 (8) .87 (22) PG 13 / 13.5 .80 (20.3) 1.06 (27) 3.54 (90) .35 (9) .94 (24) PG 16 .89 (22.5) 1.10 (28) - .39 (10) 1.06 (27) PG 21 1.12 (28.4) 1.22 (31) - .43 (11) 1.30 (33) PG 29 1.47 (37.3) 1.54 (39) - .43 (11) 1.65 (42) PG 36 1.85 (47) 1.89 (48) - .51 (13) 2.09 (53) PG 42 2.13 (54.1) 1.93 (49) - .51 (13) 2.36 (60) PG 48 2.34 (59.4) 1.93 (49) - .55 (14) 2.56 (65) 3/8" NPT .68 (17.2) .87 (22) 2.13 (54) .59 (15) .75 (19) / .87 (22) 1/2" NPT .83 (21.1) 1.06 (27) 2.48 (63) .51 (13) .94 (24) 1/2" NPT .83 (21.1) 1.10 (28) - .51 (13) 1.06 (27) 3/4" NPT 1.05 (26.7) 1.22 (31) - .51 (13) 1.30 (33) M12 X 1.5 .47 ( 12) .83 (21) 2.13 (54) .31 (8) .59 (15) M16 X 1.5 .63 (16) .87 (22) 2.48 (63) .31 (8) .75 (19) M20 X 1.5 .79 (20) 1.06 (27) 3.54 (90) .35 (9) .94 (24) M25 X 1.5 .98 (25) 1.22 (31) - .43 (11) 1.30 (33) M32 X 1.5 1.26 (32) 1.54 (39) - .43 (11) 1.65 (42) *Note: UL, CSA, UR, CE, and German Lloyd Approvals apply to Dome Fittings. *Note: VDE Approval only applies to Dome Fittings with Metric Threads. A F1/F * Food & Beverage Industries * Clean Room Applications * High Temp. Applications * V0 Rated Suggested Clearance Hole for Non-Threaded Mounting F1/F PVDF Body FKM Insert C B TL For Material Specifications and Approval Information refer to page 52. TL www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 25 PVDF / Stainless Steel -31F to 302F (-35C to 150C) Nickel Plated Brass w/ PVDF - Strain Relief Fittings PG / NPT / Metric & Elongated Threads RoHS * PVDF Spline w/ FKM Insert: High/Low Temperature & Chemical Resistant Part Numbers Cable Range PVDF / Stainless Steel -31F to 302F (-35C to 150C) Standard Elongated Inches (mm) CD07AA-RV CD07AR-RV CD09AA-RV CD09AR-RV CD11AA-RV CD11AR-RV CD13AA-RV CD13AR-RV CD16AA-RV CD16AR-RV CD21AA-RV CD21AR-RV CD29AA-RV CD29AR-RV CD36AA-RV CD36AR-RV CD42AA-RV CD42AR-RV CD48AA-RV CD48AR-RV CD07CA-RV CD07CR-RV CD09CA-RV CD09CR-RV CD11CA-RV CD11CR-RV CD13CA-RV CD13CR-RV CD16CA-RV CD16CR-RV CD21CA-RV CD21CR-RV CD29CA-RV CD29CR-RV CD36CA-RV CD36CR-RV CD42CA-RV CD42CR-RV CD48CA-RV CD48CR-RV .12 - .26 (3 - 6.5) .08 - .20 (2 - 5) .16 - .31 (4 - 8) .08 - .24 (2 - 6) .20 - .39 (5 - 10) .12 - .28 (3 - 7) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .28 - .47 (7-12) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) .98 - 1.22 (25 - 31) 1.46 - 1.73 (37 - 44) 1.14 - 1.38 (29 - 35) CD09NA-RV CD09NR-RV CD13NA-RV CD13NR-RV CD21NA-RV CD21NR-RV - .16 - .31 (4 - 8) .08 - .20 (2 - 6) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .51 - .71 (13 - 18) .35 - .63 (9-16) CD12MA-RV CD12MR-RV CD16MA-RV CD16MR-RV CD17MA-RV CD17MR-RV CD20MA-RV CD20MR-RV CD22MA-RV CD22MR-RV CD25MA-RV CD25MR-RV CD32MA-RV CD32MR-RV CD40MA-RV CD40MR-RV CD12DA-RV CD12DR-RV CD16DA-RV CD16DR-RV CD17DA-RV CD17DR-RV CD20DA-RV CD20DR-RV CD22DA-RV CD22DR-RV CD25DA-RV CD25DR-RV CD32DA-RV CD32DR-RV CD40DA-RV CD40DR-RV .12 - .26 (3 - 6.5) .08 - .20 (2 - 5) .16 - .31 (4 - 8) .08 - .24 (2 - 6) .20 - .39 (5 - 10) .12 - .28 (3 - 7) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .28 - .47 (7-12) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) .79 - 1.02 (20 - 26) Thread Type & Size Dimensions in Inches (mm) A B TL TL F1 F Clearance Hole Body Length Thread Length Thread Length Wrench Flats Standard Elongated See page 56 for thread specs +.01" (+.25 mm) PG 7 / 1/4" NPT .49 (12.5) .75 (19) .20 (5) .39 (10) .55 (14) PG 9 .60 (15.2) .83 (21) .24 (6) .39 (10) .67 (17) PG 11 .73 (18.5) .87 (22) .24 (6) .39 (10) .79 (20) PG 13 / 13.5 .80 (20.3) .94 (24) .26 (6.5) .39 (10) .87 (22) PG 16 .89 (22.5) .91 (23) .26 (6.5) .39 (10) .94 (24) PG 21 1.12 (28.4) .94 (24) .28 (7) .47 (12) 1.18 (30) PG 29 1.47 (37.3) 1.14 (29) .31 (8) .47 (12) 1.57 (40) PG 36 1.85 (47) 1.38 (35) .31 (8) .59 (15) 1.97 (50) PG 42 2.13 (54.1) 1.46 (37) .35 (9) .59 (15) 2.24 (57) PG 48 2.34 (59.4) 1.50 (38) .39 (10) .59 (15) 2.52 (64) 3/8" NPT .68 (17.2) .83 (21) .59 (15) - 1/2" NPT .83 (21.1) .94 (24) .51 (13) - .67 (17) / .75 (19) .87 (22) / .94 (24) 3/4" NPT 1.05 (26.7) .98 (25) .51 (13) - 1.18 (30) M12 X 1.5 .47 ( 12) .75 (19) .26 (6.5) .39 (10) .55 (14) M16 X 1.5 .63 (16) .83 (21) .24 (6) .39 (10) .67 (17) / .75 (19) M16 X 1.5 .63 (16) .87 (22) .24 (6) .39 (10) .79 (20) M20 X 1.5 .79 (20) .91 (23) .24 (6) .39 (10) .87 (22) M20 X 1.5 .79 (20) .94 (24) .24 (6) .39 (10) .94 (24) M25 X 1.5 .98 (25) 1.02 (25) .28 (7) .47 (12) 1.18 (30) M32 X 1.5 1.26 (32) 1.22 (31) .31 (8) .47 (12) 1.57 (40) M40 X 1.5 1.57 (40) 1.46 (37) .31 (8) .59 (15) 1.97 (50) * * * * Benefits: High Performance Extreme Temp. Rugged Chemical Apps. F1/F B A TL Suggested Clearance Hole for NonThreaded Mounting *Note: VDE Approval only applies to Dome Fittings with Metric Threads. Dome Fittings also available with the following approvals: www.SealconEX.com 26 For Material Specifications and Approval Information refer to page 52. PVDF FKM Insert Clamping Spline www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice FKM O-Ring Stainless Steel - Liquid Tight Strain Relief Fittings (303 & 316L) INOX - PG / Metric & NPT Threads Part Numbers Cable Range Standard w/ Buna-N Insert PVDF w/ FKM Insert CD07AA-SS CD07AR-SS CD09AA-SS CD09AR-SS CD11AA-SS CD11AR-SS CD13AA-SS CD13AR-SS CD16AA-SS CD16AR-SS CD21AA-SS CD21AR-SS CD29AA-SS CD29AR-SS CD36AA-SS CD36AR-SS CD42AA-SS CD42AR-SS CD48AA-SS CD48AR-SS CD07AA-SV CD07AR-SV CD09AA-SV CD09AR-SV CD11AA-SV CD11AR-SV CD13AA-SV CD13AR-SV CD16AA-SV CD16AR-SV CD21AA-SV CD21AR-SV CD29AA-SV CD29AR-SV CD36AA-SV CD36AR-SV CD42AA-SV CD42AR-SV CD48AA-SV CD48AR-SV CD12MA-SS CD12MR-SS CD16MA-SS CD16MR-SS CD20MA-SS CD20MR-SS CD25MA-SS CD25MR-SS CD32MA-SS CD32MR-SS CD40MA-SS CD40MR-SS CD50MA-SS CD50MR-SS CD63MA-SS CD63MR-SS *Note: CSA and CD12MA-SV CD12MR-SV CD16MA-SV CD16MR-SV CD20MA-SV CD20MR-SV CD25MA-SV CD25MR-SV CD32MA-SV CD32MR-SV CD40MA-SV CD40MR-SV CE Approvals Stainless Steel (316L) INOX NPT Part Numbers -40F to 212F -31F to 302F (-40C to 100C) (-35C to 150C) Standard w/ Buna-N Insert CD09NA-6S CD09NR-6S CD13NA-6S CD13NR-6S CD21NA-6S CD21NR-6S CD29NA-6S CD29NR-6S PVDF w/ FKM Insert CD09NA-6V CD09NR-6V CD13NA-6V CD13NR-6V CD21NA-6V CD21NR-6V CD29NA-6V CD29NR-6V Inches (mm) .12 - .26 (3 - 6.5) .08 - .20 (2 - 5) .16 - .31 (4 - 8) .08 - .24 (2 - 6) .20 - .39 (5 - 10) .12 - .28 (3 - 7) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .28 - .47 (7-12) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) .98 - 1.22 (25 - 31) 1.46 - 1.73 (37 - 44) 1.14 - 1.38 (29 - 35) B TL F1 F Body Length Thread Length Wrench Flats See page 56 for thread specs +.01" (+.25 mm) PG 7 .49 (12.5) .75 (19) .20 (5) .55 (14) PG 9 .60 (15.2) .83 (21) .24 (6) .67 (17) PG 11 .73 (18.5) .87 (22) .24 (6) .87 (22) PG 13 / 13.5 .80 (20.3) .94 (24) .26 (6.5) .87 (22) PG 16 .89 (22.5) .91 (23) .26 (6.5) .94 (24) PG 21 1.12 (28.4) .94 (24) .28 (7) 1.18 (30) PG 29 1.47 (37.3) 1.14 (29) .31 (8) 1.61 (41) PG 36 1.85 (47) 1.38 (35) .31 (8) 1.97 (50) PG 42 2.13 (54.1) 1.46 (37) .35 (9) 2.24 (57) PG 48 2.34 (59.4) 1.50 (38) .39 (10) 2.52 (64) .47 (12) .75 (19) .26 (6.5) .55 (14) .63 (16) .87 (22) .24 (6) .87 (22) .79 (20) .91 (23) .24 (6) .94 (24) .98 (25) .94 (24) .28 (7) 1.18 (30) 1.26 (32) 1.22 (31) .31 (8) 1.61 (47) 1.57 (40) 1.46 (37) .31 (8) 1.97 (50) 1.97 (50) 1.46 (37) .35 (9) 2.36 (60) .39 (10) 2.52 (64) / 2.68 (68) .12 - .26 (3 - 6.5) M12 X 1.5 .08 - .20 (2 - 5) .20 - .39 (5 - 10) M16 X 1.5 .12 - .28 (3 - 7) .39 - .55 (10 - 14) M20 X 1.5 .28 - .47 (7-12) .51 - .71 (13 - 18) M25 X 1.5 .35 - .63 (9 - 16) .71 - .98 (18 - 25) M32 X 1.5 .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) M40 X 1.5 .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) M50 X 1.5 .98 - 1.22 (25 - 31) 1.46 - 1.73 (37 - 44) M63 X 1.5 1.14 - 1.38 (29 - 35) only applies to Standard Fittings. Cable Range A Clearance Hole Thread Type & Size 2.48 (63) 1.50 (38) Stainless Steel Strain Relief Fittings can be used in many applications, where the environment dictates a corrosion proof solution. Typical Application: * * * * * * Off-shore Marine Chemical Plants Food Processing Clean Room Other Rugged Applications F1/F B A TL Suggested Clearance Hole for Non-Threaded Mounting (303) INOX Stainless Steel also available in NPT Threads upon request. FKM Insert PVDF Clamping Spine *Note: VDE Approval only applies to Dome Fittings with Metric Threads. Dimensions in Inches (mm) A B Clearance Body Hole Length TL F1 F Thread Length Wrench Flats See page 56 for thread +.01" specs (+.25 mm) Inches (mm) .16 - .31 (4 - 8) 3/8" NPT .08 - .24 (2 - 6) .24 - .47 (6 - 12) 1/2" NPT .20 - .35 (5 - 9) .51 - .71 (13 - 18) 3/4" NPT .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) 1" NPT * * PVDF / Stainless Steel (303 / 316L) Stainless Steel: Outer High Performance, High/Low Temp. & Corrosion Resistant -40F to 212F -31F to 302F (-40C to 100C) (-35C to 150C) * Dimensions in Inches (mm) Thread Type & Size The 316L material is much harder and ideal for direct exposure to salt water and chemical solutions in marine, off-shore, pharmaceutical, etc. Dome Fittings also available with the following approvals: .68 (17.2) .83 (21) .59 (15) .67 (17) / .75 (19) .83 (21.1) .94 (24) .51 (13) .87 (22) / Stainless .94 (24) 1.05 (26.7) .98 (25) .51 (13) 1.35 (34.3) 1.14 (29) .75 (19) (316L) INOX Steel also 1.18 (30) available in PG and Metric 1.61 (41) Threads upon request. www.SealconEX.com Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 27 316L Stainless Steel - Hygienic Cable Glands RG/FP Hygienic Glands - Metric Threads RG Gland Part Numbers Cable Range PVDF / Stainless Steel -40F to 248F (-40C to 120C) RG12MA-6S RG17MA-6S RG17MR-6S RG22MA-6S RG22MR-6S RG25MA-6S RG25MK-6S RG25MR-6S RG32MA-6S RG32MR-6S Thread Type & Size COMPLIANT MATERIALS Dimensions in Inches (mm) A TL B E F Clearance Hole Thread Length Body Length Hole Diameter Wrench Flat .24 (6) .24 (6) .24 (6) .24 (6) .24(6) .28 (7) .28 (7) .28 (7) .31 (8) .31 (8) .75 (19) .79 (20) .79 (20) .89 (22.5) .79 (20) .93 (23.5) .93 (23.5) .93 (23.5) 1.04 (26.5) 1.04 (26.5) .83 (21) 1.06 (27) 1.06 (27) 1.30 (33) 1.10 (28) 1.50 (38) 1.50 (38) 1.50 (38) 1.77 (45) 1.77 (45) .55 (14) .75 / .83 (19 / 21) .75 / .83 (19 / 21) .94 / 1.06 (24 / 27) .83 / .94 (21 / 24) 1.18 (30) 1.18 (30) 1.18 (30) 1.42 (36) 1.42 (36) Inches (mm) See page 56 for thread specs +.01" (+.25 mm) .20 - .26 (5 - 6.5) .30 - .40 (7.5 - 10) .24 - .30 (6 - 7.5) .43 - .53 (11 - 13.5) .43 - .53 (11 - 13.5) .60 - .71 (15 - 18) .55 - .63 (14 - 16) .51" - .59" (13 - 15) 83 - .99 (21 - 25) .71 - .83 (18 - 21) M12 x 1.5 M16 x 1.5 M16 x 1.5 M20 x 1.5 M20 x 1.5 M25 x 1.5 M25 x 1.5 M25 x 1.5 M32 x 1.5 M32 x 1.5 .47 (12) .63 (16) .63 (16) .79 (20) .79 (20) .98 (25) .98 (25) .98 (25) 1.26 (32) 1.26 (32) A Suggested Clearance Hole for Non-Threaded Mounting F **Note: EMI Option Integrated VDMA Riboflavin cleaning test passed EHEDG 01 cleaning test passed EHEDG certificate EL class I AUX approved * High pressure IP 68 & IP 69K * EMI ready for braided cable * 316 L Stainless Steel * High-Quality * silicone sealing * UL Certified. File # 103997 * EMI ready for braided cable * EHEDG Certified * FDA Compliant Materials B UL Certified! TL IP 68 & IP 69K! Thread Size E 316L Stainless Steel - Hygienic Cable Glands FP Gland - Metric Threads FP Gland Part Numbers Cable Range -40F to 248F (-40C to 120C) FP12MA-6S FP17MA-6S FP22MA-6S FP25MA-6S Thread Type & Size COMPLIANT MATERIALS Dimensions in Inches (mm) A TL B E F Clearance Hole Thread Length Body Length Hole Diameter Wrench Flat .24 (6) .24 (6) .24 (6) .28 (7) 1.18 (30) 1.34 (34) 1.36 (34.5) 1.63 (41.5) .83 (21) 1.06 (27) 1.30 (33) 1.50 (38) .55 (14) .71 / .79 (18 / 20) .94 (24) 1.06 / 1.18 (27 / 30) Inches (mm) See page 56 for thread specs +.01" (+.25 mm) .14 - .26 (3.5 - 6.5) .20 - .40 (5 - 10) .40 - .55 (10 - 14) .51 - .71 (13 - 18) M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 .47 (12) .63 (16) .79 (20) .98 (25) A * Perfect for Foam Cleaning * EMI ready for braided cable * No more waterpooling * The elastic mebrane seal avoids cable slipping while also being liquid tight * FDA Compliant material F Suggested Clearance Hole for Non-Threaded Mounting B IP 68 TL Thread Size For Material Specifications and Approval Information refer to page 52. 28 E www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Accessories for Strain Relief Fittings Summary Page 30 - Locking Nuts Locking Nuts - Page 29 EMI/RFI Proof (Nickel Plated Brass) * Zinc Plated Steel * Stainless Steel (303) - INOX * * Black & Gray Nylon * Nickel Plated Brass O-Rings - Page 31 * Buna-N * FKM Polyethylene * Fiber-Reinforced Plastic * * Black Nylon * Nickel Plated Brass * Stainless Steel Accessories Hole Plug - Page 32-34 Hex Plugs: Dome Plugs: * Buna-N * FKM Page 31 - Seal Rings * Silicone Page 32-33 - Blind Plug/Clamp Blind Plugs: * Black Nylon Cable Clamp: Nickel Plated Brass * Page 35-36 - Thread Adapters Wrenches - Page 34 Converts a Type of (NPT, PG, Metric) Threads * Black Nylon * Nickel Plated Brass * * Deep Socket Wrenches Thread Reducers - Page 37-39 Reduces a Type of (NPT, PG, Metric) * Gray Nylon * Black Nylon * FKM * Stainless Steel Page 40 - Thread Enlargers Enlarges a Type of (NPT, PG, Metric) Threads * Black Nylon * Nickel Plated Brass * Accessories - Locking Nuts Nylon & Nickel Plated Brass - PG / NPT / Metric Threads Nylon: Black & Gray Locking Nuts* Part Numbers -40F to 212F (-40C to 100C) RoHS * Nickel Plated Brass: Locking Nuts Part Numbers Thread Type Dimens. Inches (mm) & Size G F Thread Type Dimens. Inches (mm) & Size G F Thickness Wrench Flats Thickness Wrench Flats Nylon Locking Nuts Black Gray See page 56 for thread specs NP-07-BK NP-09-BK NP-11-BK NP-13-BK NP-16-BK NP-21-BK NP-29-BK NP-36-BK NP-42-BK NP-48-BK NP-07-GY NP-09-GY NP-11-GY NP-13-GY NP-16-GY NP-21-GY NP-29-GY NP-36-GY NP-42-GY NP-48-GY PG 7 PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48 .20 (5) .20 (5) .20 (5) .24 (6) .24 (6) .28 (7) .28 (7) .31 (8) .31 (8) .31 (8) .75 (19) .87 (22) .94 (24) 1.06 (27) 1.18 (30) 1.41 (36) 1.81 (46) 2.36 (60) 2.56 (65) 2.76 (70) NN-38-BK NN-13-BK NN-21-BK NN-29-BK NN-09-GY NN-13-GY NN-21-GY NN-29-GY 3/8" NPT 1/2" NPT 3/4" NPT 1" NPT .28 (7) .24 (6) .28 (7) .28 (7) .94 (24) 1.06 (27) 1.26 (32) 1.57 (40) NM-12-BK NM-16-BK NM-20-BK NM-25-BK NM-32-BK NM-40-BK NM-50-BK NM-63-BK NM-12-GY NM-16-GY NM-20-GY NM-25-GY NM-32-GY NM-40-GY NM-50-GY NM-63-GY M12 X 1.5 M16 X 1.5 M20 X 1.5 M25 X 1.5 M32 X 1.5 M40 X 1.5 M50 X 1.5 M63 X 1.5 19 (4.79) .20 (5) .24 (6) .26 (6.5) .28 (7) .28 (7) .31 (8) .31 (8) .86 (22) .87 (22) 1.06 (27) 1.26 (32) 1.61 (41) 1.97 (50) 2.36 (60) 2.95 (75) * V0 Rated G Wrench Flat (F) Nickel Plated Brass Locking Nuts Nickel Plated Brass Locking Nuts G Wrench Flat (F) Additonal: Nickel Plated Brass Extra Small & Large Locking Nuts are available in Metric: (M6, M8, M10, M63, M75, M80, M90, M100, M110). See Page 15. Nickel Plated Brass See page 56 for thread specs NP-07-BR NP-09-BR NP-11-BR NP-13-BR NP-16-BR NP-21-BR NP-29-BR NP-36-BR NP-42-BR NP-48-BR PG 7 PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48 .11 (2.8) .11 (2.8) .12 (3) .12 (3) .12 (3) .14 (3.5) .16 (4) .20 (5) .20 (5) .22 (5.5) .59 (15) .71 (18) .83 (21) .91 (23) 1.02 (26) 1.26 (32) 1.61 (41) 2.01 (51) 2.36 (60) 2.52 (64) NN-38-BR NN-13-BR NN-21-BR NN-29-BR 3/8" NPT 1/2" NPT 3/4" NPT 1" NPT .19 (4.79) .12 (3) .14 (3.5) .14 (3.5) .82 (22) .94 (24) 1.18 (30) 1.38 (35) NM-06-BR NM-08-BR NM-10-BR NM-12-BR NM-16-BR NM-20-BR NM-25-BR NM-32-BR NM-40-BR NM-50-BR NM-63-BR M6 X 1.0 M8X1.25 M10 X 1.5 M12 X 1.5 M16 X 1.5 M20 X 1.5 M25 X 1.5 M32 X 1.5 M40 X 1.5 M50 X 1.5 M63 X 1.5 .10 (2.5) .10 (2.5) .11 (2.8) .11 (2.8) .11 (2.8) .12 (3) .14 (3.5) .16 (4) .18 (4.5) .22 (5.5) .24 (6) .39 (10) .51 (13) .51 (13) .59 (15) .75 (19) .91 (23) 1.14 (29) 1.42 (36) 1.77 (45) 2.17 (55) 2.76 (70) * Note: German Lloyd only applies to Nickel Plated Brass Locking Nuts. For Material Specifications and Approval Information refer to page 52. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 29 Accessories - Locking Nuts - Zinc Plated Steel NPB, Stainless Steel - PG / NPT / Metric EMI/RFI - Nickel Plated Brass: Locking Nuts Accessories Part Numbers Thread Type & Size RoHS Dimens. Inches (mm) G F H Thickness Wrench Flats Cutting Edge Height These Locking Nuts have cutting edges which will slice through paint coatings on a metal enclosure to ensure grounding. These Locking Nuts are also suitable for applications with lots of vibration. Nickel Plated Brass Locking Nut Nickel Plate Brass See page 56 for w/ Cutting Edges thread specs NP-07-BE NP-09-BE NP-11-BE NP-13-BE NP-16-BE NP-21-BE NP-29-BE NP-36-BE NP-42-BE NP-48-BE PG 7 PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48 .11 (2.8) .11 (2.8) .12 (3) .12 (3) .12 (3) .14 (3.5) .16 (4) .20 (5) .20 (5) .22 (5.5) .59 (15) .71 (18) .83 (21) .91 (23) 1.02 (26) 1.26 (32) 1.61 (41) 2.01 (51) 2.36 (60) 2.52 (64) .028 (0.7) .028 (0.7) .028 (0.7) .028 (0.7) .028 (0.7) .028 (0.7) .028 (0.7) .028 (0.7) .028 (0.7) .028 (0.7) NN-13-BE 1/2" NPT .12 (3) .94 (24) .028 (0.7) NM-12-BE NM-16-BE NM-20-BE NM-25-BE NM-32-BE NM-40-BE NM-50-BE NM-63-BE M12 X 1.5 M16 X 1.5 M20 X 1.5 M25 X 1.5 M32 X 1.5 M40 X 1.5 M50 X 1.5 M63 X 1.5 .11 (2.8) .11 (2.8) .12 (3) .14 (3.5) .18 (4.5) .20 (5) .20 (5) .24 (6) .59 (15) .75 (19) .94 (24) 1.18 (30) 1.42 (36) 1.81 (46) 2.36 (60) 2.76 (70) .028 (0.7) .028 (0.7) .028 (0.7) .028 (0.7) .028 (0.7) .028 (0.7) .028 (0.7) .028 (0.7) Nylon Locking Nuts Stainless Steel (303) Locking Nut Zinc Plated Steel Locking Nut Stainless Steel: Locking Nuts Part Numbers Thread Type Dimens. Inches (mm) & Size G F Thickness Wrench Flats *Note: BE-Locknuts have the following approvals: CE & German Lloyd. See page 56 for 303 Stainless Steel thread specs EMI / RFI Proof Locking Nut with Cutting Edges EMI Nickel Plated Brass Locking Nut G H Wrench Flat (F) Zinc Plated Steel: Locking Nuts Part Numbers Thread Type Dimens. Inches (mm) & Size G F -60F to 1,000F (-50C to 537C) Thickness Zinc Plated Steel See page 56 for thread specs NN-10-ST NN-34-ST NN-36-ST 1" NPT 1-1/4" NPT 1-1/2" NPT G Wrench Flat (F) 30 Wrench Flats NP-07-SS NP-09-SS NP-11-SS NP-13-SS NP-16-SS NP-21-SS NP-29-SS NP-36-SS PG 7 PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 .11 (2.8) .11 (2.8) .12 (3) .12 (3) .12 (3) .14 (3.5) .16 (4) .20 (5) .67 (17) .87 (22) .87 (22) .94 (24) 1.06 (27) 1.26 (32) 1.61 (41) 1.97 (50) NM-12-SS NM-16-SS NM-20-SS NM-25-SS NM-32-SS NM-40-SS NM-50-SS NM-63-SS M12 X 1.5 M16 X 1.5 M20 X 1.5 M25 X 1.5 M32 X 1.5 M40 X 1.5 M50 X 1.5 M63 X 1.5 .11 (2.8) .11 (2.8) .12 (3) .14 (3.5) .16 (4) .18 (4.5) .22 (5.5) .24 (6) .59 (15) .75 (19) .91 (23) 1.14 (29) 1.42 (36) 1.77 (45) 2.17 (55) 2.76 (70) Stainless Steel Locking Nuts .24 (6) .20 (5) .16 (4) 1.73 (44) 2.01 (53) 2.19 (55.5) Zinc Plated Steel Locking Nuts Wrench Flat (F) G Typical Applications for Stainless Steel: * Off-shore * Marine * Chemical Plants * Food Processing * Clean Room * Other Rugged Applications www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Accessories - O-Rings & Seal Rings For Strain Relief Fittings - PG / NPT / Metric Seal Rings: Polyethylene, Fiber-Reinforced Plastic Part Numbers -22F to 158F -40F to 572F (-30C to 70C) (-40C to 300C) Thread Type & Size O-Rings: Buna-N, FKM, Silicone Dimensions Inches (mm) d D Outer Inner Diameter Diameter H Height Part Numbers -22F to 248F -40F to 392F -76F to 482F (-30C to 120C) (-40C to 200C) (-60C to 250C) FKM Silicone See page 56 for thread specs .06 (1.5) .06 (1.5) .06 (1.5) .06 (1.5) .06 (1.5) .06 (1.5) .08 (2) .08 (2) .08 (2) .08 (2) OR-07-BN OR-09-BN OR-11-BN OR-13-BN OR-16-BN OR-21-BN OR-29-BN OR-36-BN OR-42-BN OR-48-BN OR-07-VT OR-09-VT OR-11-VT OR-13-VT OR-16-VT OR-21-VT OR-29-VT OR-36-VT OR-42-VT OR-48-VT OR-07-SI OR-09-SI OR-11-SI OR-13-SI OR-16-SI OR-21-SI OR-29-SI OR-36-SI OR-42-SI OR-48-SI PG 7 PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48 .39 (120) .47 (12) .63 (16) .67 (17) .71 (18) 1.02 (26) 1.30 (33) 1.69 (43) 1.97 (50) 2.16 (55) .06 (1.5) .06 (1.5) .06 (1.5) .07 (1.8) .06 (1.5) .08 (2) .08 (2) .08 (2) .08 (2) .08 (2) OR-38-BN OR-18-BN OR-34-BN OR-10-BN OR-54-BN OR-64-BN OR-38-VT OR-18-VT OR-34-VT OR-10-VT OR-54-VT OR-64-VT OR-38-SI OR-18-SI OR-34-SI OR-10-SI OR-54-SI OR-64-SI 3/8" NPT 1/2" NPT 3/4" NPT 1" NPT 1-1/4" NPT 1-1/2" NPT .51 (13) .75 (19) .87 (23) 1.14 (29) 1.12 (30) 1.77 (45) .08 (2) .07 (1.8) .078 (2.5) .078 (2.5) .10 (2.5) .10 (2.5) OM-12-BN* OM-16-BN* OM-20-BN* OM-25-BN OM-32-BN OM-40-BN OM-50-BN OM-63-BN OM-12-VT* OM-16-VT* OM-20-VT* OM-25-VT OM-32-VT OM-40-VT OM-50-VT OM-63-VT OM-12-SI* OM-16-SI* OM-20-SI* OM-25-SI OM-32-SI OM-40-SI OM-50-SI OM-63-SI M12 X 1.5 M16 X 1.5 M20 X 1.5 M25 X 1.5 M32 X 1.5 M40 X 1.5 M50 X 1.5 M63 X 1.5 .39 (10) .47 (12) .67 (17) .87 (22) 1.14 (29) 1.38 (35) 1.69 (43) 2.17 (55) .06 (1.5) .06 (1.5) .07 (1.8) .08 (2) .08 (2) .08 (2) .08 (2) .08 (2) SR-07-NY SR-09-NY SR-11-NY SR-13-NY SR-16-NY SR-21-NY SR-29-NY SR-36-NY SR-42-NY SR-48-NY SR-07-HD SR-09-HD SR-11-HD SR-13-HD SR-16-HD SR-21-HD SR-29-HD SR-36-HD SR-42-HD SR-48-HD PG 7 PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48 .49 (12.5) .65 (16.5) .75 (19) .60 (15.2) .73 (18.6) .89 (22.5) .98 (25) .80 (20.4) .89 (22.5) 1.06 (27) 1.11 (28.3) 1.32 (33.5) 1.46 (37) 1.71 (43.5) 1.85 (47) 2.17 (55) 2.13 (54.1) 2.48 (63) 2.33 (59.3) 2.72 (69) SR-38-NY SR-18-NY SR-34-NY SR-10-02 SR-14-NY - 3/8" NPT 1/2" NPT 3/4" NPT 1" NPT 1-1/4" NPT .67 (17) .83 (21) 1.06 (27) 1.32 (33.5) .63 (41.5) .87 (22) .98 (25) 1.43 (36) 1.71 (43) 1.95 (49) .06 (1.5) .06 (1.5) .04 (1) .09 (2.2) .06 (1.5) SM-12-NY SM-16-NY SM-20-NY SM-25-NY SM-32-NY SM-40-NY SM-50-NY SM-63-NY SM-12-HD SM-16-HD SM-20-HD SM-25-HD SM-32-HD SM-40-HD SM-50-HD SM-63-HD M12 X 1.5 M16 X 1.5 M20 X 1.5 M25 X 1.5 M32 X 1.5 M40 X 1.5 M50 X 1.5 M63 X 1.5 .47 (12) .63 (16) .79 (20) .98 (25) 1.26 (32) 1.57 (40) 1.97 (50) 2.48 (63) .63 (16) .79 (20) .98 (25) 1.22 (31) 1.50 (38) 1.68 (42.7) 2.28 (58) 2.83 (72) .08 (2) .08 (2) .08 (2) .08 (2) .08 (2) .08 (2) .08 (2) .08 (2) If NEMA 4x or 6 (IP 68 or IP 69K - Submersible) is required, O-Rings or Seal Rings should be used when mounting Strain Relief Fittings to a control panel, secured with a Locking Nut. The straight Strain Relief Fittings feature a molded O-Ring groove. For these fittings the O-Ring is the best solution. The Snap Elbows and some of the Conduit Fittings don't have a recess for an O-Ring. In that case, the Seal Ring would be the better choice, unless the hole can be beveled to accommodate an O-Ring. Part Numbers -40F to 212F (-40C to 100C) Fits PG Thread Fits PG Thread Fits PG Thread *Metal Parts use different O-Rings. d D H PG 7 PG9 3/8" NPT PG 11 PG 13 / 13.5 1/2" NPT PG 16 1/2" NPT-E PG 21 3/4" NPT PG 29 1" & 1-1/4" NPT PG 36 1-1/2" NPT PG 42 PG 48 - M12 x 1.5 M16 x 1.5 M16 x 1.5 - E M20 x 1.5 M20 x 1.5 - E M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5 or d H Accessories - Strain Relief Blind Plugs Nylon - Fits PG / NPT / Metric Threads Dimensions in Inches (mm) D1 D2 Diameter (1) Diameter (2) O-Ring Groove Metal O-Ring Groove RoHS L Length See page See page See page 56 for thread 56 for thread 56 for thread specs specs specs PL-07-BK PL-09-BK PL-11-BK PL-13-BK PL-16-BK PL-21-BK PL-29-BK PL-36-BK PL-42-BK PL-48-BK Accessories Buna-N Fiber-reinforced See page 56 for Plastic thread specs Polyethylene Thread Type Dimens. Inches (mm) & Size d H Height Inner Diameter These non-threaded Plugs are made of Black Nylon (RAL 9005) and fit PG, NPT and Metric Strain Relief Fittings. L .24 (6) .26 (7.5) .37 (9.5) .45 (11.5) .53 (13.5) .69 (17.5) .94 (24) 1.22 (31) 1.46 (37) 1.69 (43) For Material Specifications and Approval Information refer to page 52. .18 (4.5) .22 (5.5) .26 (6.5) .33 (8.5) .45 (11.5) .61 (15.5) .75 (19) .98 (25) 1.18 (30) 1.34 (34) .59 (15) .67 (17) .75 (19) .75 (19) .77 (19.5) .93 (23.5) 1.02 (26) 1.10 (28) 1.10 (28) 1.10 (28) D2 D1 Inserts into Dome Nut for a liquid tight seal! www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 31 Accessories - (Dome & Hex) Hole Plugs Nylon, Polypropylene & NPB - PG / NPT / Metric Threads Part Numbers Dimensions Inches (mm) H D TL Overall Height Outer Diameter Thread Length Black Gray See page 56 for thread specs DP-07-BK DP-09-BK DP-11-BK DP-13-BK DP-16-BK DP-21-BK DP-29-BK DP-36-BK DP-42-BK DP-48-BK DP-07-GY DP-09-GY DP-11-GY DP-13-GY DP-16-GY DP-21-GY DP-29-GY DP-36-GY DP-42-GY DP-48-GY PG 7 PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48 .31 (8) .35 (9) .35 (9) .37 (9.5) .37 (9.5) .43 (11) .47 (12) .59 (15) .63 (16) .63 (16) .59 (15) .75 (19) .87 (22) .98 (25) 1.06 (27) 1.30 (33) 1.73 (44) 2.17 (55) 2.44 (62) 2.72 (69) .24 (6) .24 (6) .24 (6) .24 (6) .24 (6) .31 (8) .31 (8) .39 (10) .39 (10) .47 (12) DM-12-BK DM-16-BK DM-20-BK DM-25-BK DM-32-BK DM-40-BK DM-50-BK DM-63-BK DM-12-GY DM-16-GY DM-20-GY DM-25-GY DM-32-GY DM-40-GY DM-50-GY DM-63-GY M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5 .39 (10) .45 (11.5) .37 (9.5) .61 (15.5) .63 (16) .71 (18) .73 (18.5) .75 (19) .59 (15) .79 (20) .98 (25) 1.18 (30) 1.50 (38) 1.81 (46) 2.20 (56) 2.72 (69) .24 (6) .28 (7) .24 (6) .43 (11) .43 (11) .51 (13) .51 (13) .59 (15) TL H D Thread Type TL B Note: HP & HM Nylon Plugs can be tightened with Hex & Allen wrenches, Nylon Dome Plug as well as regular screwdrivers. D Nylon Hex Plug Thread Type *Note: Lloyd Approval Approval *Note: German German Lloyd only applies appliestotoNylon NylonHex HexPlugs Plugs only with Threads. with PG PG or or Metric Metric Threads. RoHS Hex Plugs also available with the following approvals: -40F to 176F (-40C to 80C) 32 Thread Type & Size www.SealconEX.com without O-Ring w/ O-Ring See page 56 for thread specs DP-07-BR DP-09-BR DP-11-BR DP-13-BR DP-16-BR DP-21-BR DP-29-BR DP-36-BR DP-42-BR DP-48-BR DP-07-BR-B DP-09-BR-B DP-11-BR-B DP-13-BR-B DP-16-BR-B DP-21-BR-B DP-29-BR-B DP-36-BR-B DP-42-BR-B DP-48-BR-B PG 7 PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48 TL D DM-12-BR DM-16-BR DM-20-BR DM-25-BR DM-32-BR DM-40-BR DM-50-BR DM-63-BR DM-12-BR-B DM-16-BR-B DM-20-BR-B DM-25-BR-B DM-32-BR-B DM-40-BR-B DM-50-BR-B DM-63-BR-B .55 (14) .67 (17) .79 (20) .87 (22) .94 (24) 1.18 (30) 1.54 (39) 1.97 (50) 2.24 (57) 2.52 (64) .19 (4.8) .22 (5.5) .22 (5.5) .24 (6) .24 (6) .26 (6.5) .30 (7.5) .35 (9) .39 (10) .39 (10) D TL Body Length Outer Diameter Thread Length .59 (15) .75 (19) .94 (24) .94 (24) 1.10 (28) 1.42 (36) 1.81 (46) 2.17 (55) 2.36 (60) 2.76 (70) .33 (8.5) .33 (8.5) .35 (9) .35 (9) .41 (10.5) .45 (11.5) .45 (11.5) .53 (13.5) .53 (13.5) .57 (14.5) .59 (15) .75 (19) .94 (24) 1.10 (28) 1.42 (36) 1.81 (46) 2.17 (55) 2.76 (70) .33 (8.5) .33 (8.5) .35 (9) .41 (10.5) .45 (11.5) .45 (11.5) .53 (13.5) .57 (14.5) .51 (13) .51 (13) .57 (14.5) .63 (16) .69 (17.5) .71 (18) .79 (20) .83 (21) Dimensions in Inches (mm) H D TL Overall Height Outer Diameter Thread Length M12 x 1.5 .30 (7.5) M16 x 1.5 .35 (9) M20 x 1.5 .37 (9.5) M25 x 1.5 .43 (11) M32 x 1.5 .47 (12) M40 x 1.5 .51 (13) M50 x 1.5 .59 (15) M63 x 1.5 .63 (16) .55 (14) .71 (18) .87 (22) 1.10 (28) 1.38 (35) 1.73 (44) 2.13 (54) 2.64 (67) .20 (5) .37 (9.5) .55 (14) .20 (5) .35 (9) .79 (20) .26 (6.5) .37 (9.5) .94 (24) .28 (7) .43 (11) 1.10 (28) .31 (8) .49 (12.5) 1.38 (35) .33 (8.5) .47 (12) 1.77 (45) .35 (9) .59 (15) 2.17 (55) .39 (10) .63 (16) 2.68 (68) H D TL Overall Outer Thread Height Diameter Length w/ Ow/ O- w/ ORing Ring Ring .26 (6.5) .24 (6) .26 (6.5) .28 (7) .31 (8) .31 (8) .35 (9) .39 (10) To order a hole plug with an FKM O-Ring instead of Buna-N, replace "-V" (FKM) to part number (e.g. DP-11-BR-V). TL w/ O-Ring .20 (5) .24 (6) .24 (6) .26 (6.5) .26 (6.5) .28 (7) .31 (8) .35 (9) .39 (10) .39 (10) M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5 HM-12-BK HM-16-BK HM-20-BK HM-25-BK HM-32-BK HM-40-BK HM-50-BK HM-63-BK With O-Ring B PG 7 / 1/4" NPT .51 (13) .51 (13) PG 9 .57 (14.5) PG 11 PG 13 / 13.5 .57 (14.5) .63 (16) PG 16 .69 (17.5) PG 21 .71 (18) PG 29 .79 (20) PG 36 .79 (20) PG 42 .83 (21) PG 48 HP-07-BK HP-09-BK HP-11-BK HP-13-BK HP-16-BK HP-21-BK HP-29-BK HP-36-BK HP-42-BK HP-48-BK Without O-Ring Dimensions Inches (mm) See page 56 for thread specs Black* See page 56 for thread specs Overall Thread Outer Thread Height Length Diameter Length .31 (8) .35 (9) .35 (9) .37 (9.5) .37 (9.5) .43 (11) .47 (12) .59 (15) .63 (16) .63 (16) (-20C to 80C) Thread Type & Size Dimensions Inches (mm) H Part Numbers Thread Type & Size -4F to 176F -40 F to 176 F (-40 C to 80 C) Dome Plugs: Nickel Plated Brass Part Numbers Hex Plugs: Nylon Part Numbers Dome Plugs: Nickel Plated Brass Accessories -40F to 212F (-40C to 100C) Thread Type & Size *Available with an O-Ring Groove * Dome Plugs: Nylon (No O-Ring Groove) - IP 54 Hex Plugs: Polypropylene Part Numbers Thread Type & Size 32F to 275F (0C to 135C) Black See page 56 for thread specs HN-38-BK HN-12-BK HN-34-BK HN-10-BK 3/8" NPT 1/2" NPT 3/4" NPT 1" NPT Dimensions Inches (mm) H F TL Overall Height Wrench Flat Thread Length .83 (21) .81 (20.5) .87 (22) .91 (23) .75 (19) .94 (24) 1.10 (28) 1.34 (34) .59 (15) .55 (14) .63 (16) .67 (17) For Material Specifications and Approval Information refer to page 52. O-Ring needed for Nema 4x www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Accessories - (Hex) Hole Plugs Nickel Plated Brass - PG & Metric Threads Hex Plugs: Nickel Plated Brass Part Numbers -4F to 203F (-20C to 95C) -4F to 356F (-20C to 180C) RoHS Thread Type & Size Dimensions Inches (mm) F TL Overall Height Wrench Flat Thread Length without O-Ring w/ Buna-N O-Ring w/ FKM O-Ring See page 56 for thread specs HP-07-BR HP-09-BR HP-11-BR HP-13-BR HP-16-BR HP-21-BR HP-29-BR HP-36-BR HP-42-BR HP-48-BR HP-07-BR-B HP-09-BR-B HP-11-BR-B HP-13-BR-B HP-16-BR-B HP-21-BR-B HP-29-BR-B HP-36-BR-B HP-42-BR-B HP-48-BR-B HP-07-BR-V HP-09-BR-V HP-11-BR-V HP-13-BR-V HP-16-BR-V HP-21-BR-V HP-29-BR-V HP-36-BR-V HP-42-BR-V HP-48-BR-V PG 7 / 1/4" NPT PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48 .31 (8) .35 (9) .37 (9.5) .39 (10) .39 (10) .41 (10.5) .49 (12.5) .51 (13) .59 (15) .65 (16.5) .55 (14) .67 (17) .79 (20) .87 (22) .94 (24) 1.18 (30) 1.61 (41) 1.97 (50) 2.28 (58) 2.56 (65) .20 (5) .24 (6) .24 (6) .26 (6.5) .26 (6.5) .28 (7) .31 (8) .31 (8) .35 (9) .39 (10) HM-12-BR HM-16-BR HM-20-BR HM-25-BR HM-32-BR HM-40-BR HM-50-BR HM-63-BR HM-12-BR-B HM-16-BR-B HM-20-BR-B HM-25-BR-B HM-32-BR-B HM-40-BR-B HM-50-BR-B HM-63-BR-B HM-12-BR-V HM-16-BR-V HM-20-BR-V HM-25-BR-V HM-32-BR-V HM-40-BR-V HM-50-BR-V HM-63-BR-V M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5 .37 (9.5) .35 (9) .37 (9.5) .41 (10.5) .49 (12.5) .51 (13) .59 (15) .65 (16.5) .55 (14) .75 (19) .87 (22) 1.18 (30) 1.61 (41) 1.81 (46) 2.17 (55) 2.76 (70) .26 (6.5) .24 (6) .24 (6) .28 (7) .31 (8) .31 (8) .35 (9) .39 (10) Accessories H Nickel Plated Brass Hex Plug (Elongated Available Upon Request) O-Ring needed for NEMA 4x & 6 Rating. F H TL Thread Type Also, all Nickel Plated Brass & Stainless Steel HM (Hex) Hole Plugs are available with Ex-d approval! Dome Fittings also available with the following approvals: www.SealconEX.com Accessories - (Hex) Hole Plugs (303) Stainless Steel - PG & Metric Threads Hex Plugs: (303) Stainless Steel - IP 68 Part Numbers -4F to 203F (-20C to 95C) -4F to 356F (-20C to 180C) -76F to 356F (-60C to 180C) Thread Type & Size Dimensions Inches (mm) H F TL Overall Height Wrench Flat Thread Length .55 (14) .67 (17) .79 (20) .87 (22) .94 (24) 1.18 (30) 1.61 (41) 1.97 (50) .20 (5) .24 (6) .24 (6) .26 (6.5) .26 (6.5) .28 (7) .31 (8) .31 (8) .55 (14) .75 (19) .87 (22) 1.18 (30) 1.61 (41) 1.81 (46) .26 (6.5) .24 (6) .24 (6) .28 (7) .31 (8) .31 (8) See page 56 for w/ Silicone O-Ring thread specs w/ Buna-N O-Ring w/ FKM O-Ring HP-07-SS-B HP-09-SS-B HP-11-SS-B HP-13-SS-B HP-16-SS-B HP-21-SS-B HP-29-SS-B HP-36-SS-B HP-07-SS-V HP-09-SS-V HP-11-SS-V HP-13-SS-V HP-16-SS-V HP-21-SS-V HP-29-SS-V HP-36-SS-V HP-07-SS-S HP-09-SS-S HP-11-SS-S HP-13-SS-S HP-16-SS-S HP-21-SS-S HP-29-SS-S HP-36-SS-S HM-12-SS-B HM-16-SS-B HM-20-SS-B HM-25-SS-B HM-32-SS-B HM-40-SS-B HM-12-SS-V HM-16-SS-V HM-20-SS-V HM-25-SS-V HM-32-SS-V HM-40-SS-V HM-12-SS-S HM-16-SS-S HM-20-SS-S HM-25-SS-S HM-32-SS-S HM-40-SS-S PG 7 / 1/4" NPT .31 (8) .35 (9) PG 9 .37 (9.5) PG 11 .39 (10) PG 13 / 13.5 .39 (10) PG 16 .41 (10.5) PG 21 .49 (12.5) PG 29 .51 (13) PG 36 M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 .37 (9.5) .35 (9) .37 (9.5) .41 (10.5) .49 (12.5) .51 (13) These Plugs are designed to fit and seal European PG threads per DIN 46320-FS/PA and Metric threads per DIN 46320/Ms. They are made of Stainless Steel and are available with Buna-N, FKM or Silicone O-Ring. Also available in Nylon, Nickel Plated Brass, or 316L Stainless Steel. (Elongated Available Upon Request). F Dome Fittings also available with the following approvals: For Material Specifications and Approval Information refer to page 52. www.SealconEX.com TL H Thread Type Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 33 Accessories - Cable Clamp Fitting (Low Profile) Fits Metric Threads Part Numbers Cable Range Thread Type & Size Accessories -140F to 392F (-60C to 200C) Nickel Plated Brass Inches (mm) See page 56 for thread specs KL12MA-BR KL16MA-BR KL20MA-BR KL25MA-BR KL32MA-BR KL40MA-BR .20 - .30 (5 - 7.5) .28 - .39 (7 -10) .39 - .55 (10 - 14) .47 - .85 (12 - 21.5) .63 - 1.06 (16-27) .87 - 1.30 (22-33) M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 Dimensions in Inches (mm) RoHS D B TL F Hole O.D. Body Length Thread Length Wrench Flat F B TL Thread Type .47 (12) .63 (16) .79 (20) .98 (25) 1.26 (32) 1.57 (40) .59 (15) .63 (16) .71 (18) .83 (21) .87 (22) 1.00 (25.5) .63 (16) .75 (19) .94 (24) 1.34 (34) 1.65 (42) 2.05 (52) .22 (5.5) .24 (6) .26 (6.5) .31 (8) .31 (8) .37 (9.5) This clamp offers Extra Pull-out Resistance. Made of durable Nickel Plated Brass, it offers an excellent solution for your specific application needs. Not a liquid tight solution. Also available in PG Threads! Accessories - Deep Socket Wrenches for Strain Relief Fittings Used with Sizes Part Numbers Dimensions in Inches (mm) Nylon Dome Nut Brass Dome Nut Socket Wrench See page 56 for thread specs See page 56 for thread specs S-1400-WR S-1500-WR S-1700-WR S-1900-WR S-2000-WR S-2200-WR S-2400-WR S-2700-WR S-3000-WR S-3300-WR S-3600-WR S-4000-WR S-4100-WR S-4200-WR S-4600-WR S-5000-WR S-5300-WR S-5500-WR S-5700-WR S-6000-WR S-6400-WR S-6500-WR S-6800-WR PG7, M12 PG 9, 3/8" NPT, M16 PG 11, 3/8" NPT, M16-E PG 13 / 13.5, 1/2" NPT, M20 PG 16, 1/2" NPT-E, M20-E PG 21, 3/4" NPT, M25 PG 21 PG 29 PG 29, 1", 1-1/4" NPT, M32 1-1/4" NPT PG 36, 1-1/2" NPT, M40 M 50 PG 42, M50 PG 48, M63 M63 PG7, M12 PG 9, 3/8" NPT, M16 3/8" NPT, M16 PG 11, M16-E PG 13 / 13.5, 1/2" NPT, M20 PG 16, 1/2" NPT-E, M20-E PG 21, 3/4" NPT, M25 PG 29, 1" NPT, M32 PG 36, M40 M 50 PG 42, M50 PG 48, M63 M63 Handle Slit is open the full length to accomodate the installed cable The wrench encloses the dome nut on five sides 34 F L d D Wrench Flat Length Inner Diameter Outer Diameter .55 (14) .59 (15) .67 (17) .75 (19) .79 (20) .87 (22) .94 (24) 1.06 (27) 1.18 (30) 1.30 (33) 1.42 (36) 1.57 (40) 1.61 (41) 1.65 (42) 1.81 (46) 1.97 (50) 2.09 (53) 2.17 (55) 2.24 (57) 2.36 (60) 2.52 (64) 2.56 (65) 2.68 (68) 2.36 (60) 2.36 (60) 2.36 (60) 2.36 (60) 2.36 (60) 2.36 (60) 2.36 (60) 2.36 (60) 2.36 (60) 2.36 (60) 2.36 (60) 3.94 (100) 3.94 (100) 3.94 (100) 3.94 (100) 3.94 (100) 3.94 (100 3.94 (100 3.94 (100) 3.94 (100) 3.94 (100) 3.94 (100) 3.94 (100) .35 (9) .37 (9.5) .39 (10) .43 (11) .47 (12) .51 (13) .59 (15) .67 (17) .71 (18) .79 (20) .87 (22) .98 (25) 1.06 (27) 1.06 (27) 1.22 (31) 1.26 (32) 1.26 (32) 1.26 (32) 1.42 (36) 1.50 (38) 1.57 (40) 1.65 (42) 1.65 (42) .75 (19) .79 (20) .93 (23.5) 1.02 (26) 1.06 (27) 1.16 (29.5) 1.28 (32.5) 1.40 (35.5) 1.59 (40.5) 1.71 (43.5) 1.87 (47.5) 2.07 (52.5) 2.11 (53.5) 2.15 (54.5) 2.36 (60) 2.58 (65.5) 2.82 (71.5) 2.83 (72) 2.97 (75.5) 3.09 (78.5) 3.31 (84) 3.35 (85) 3.43 (87) The handy, lightweight Deep Socket Wrench is manufactured from alloy steel. It is slit open along the full length to accommodate the installed cable during tightening of the dome nut. The wrench encloses the dome nut on five sides, giving the nut additional rigidity during tightening. This is especially important if a stiff cable is used. Does not work with all Flex Fittings. F d D L For Material Specifications and Approval Information refer to page 52. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Accessories - Thread Adapters - Nickel Plated Brass Hex & Round - PG / NPT / Metric Threads Thread Adapters: PG to NPT Threads B Part Numbers F H D B TL A (AG-xxxx-BR & AM-xxxx-BR) H TL A More custom parts available online at www.SealconUSA.com or upon request! (AF-xxxx-BR, AP-xxxx-BR & AG-xxxx-AL) Operating Temperature (Nickel Plated Brass Adapters with O-Ring): -40F to 212F (-40C to 100C) Threads Male Male Thread Thread A A Female Female Thread Thread B B 1/4" NPT 1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT 3/4" NPT 1" NPT AN-1407-BR AN-1209-BR AN-1211-BR AN-1213-BR AN-1221-BR AN-3421-BR AN-1029-BR PG 7 PG 9 PG 11 PG 13/13.5 PG 21 PG 21 PG 29 Aluminum AG-0912-BR* AG-1112-BR AG-1312-BR AG-1612-BR AG-2112-BR AG-2134-BR AG-2910-BR AG-0912-AL* - Part Numbers Dimensions in Inches (mm) F TL H Wrench Flat Thread Length Height .75 (19) .98 (25) .98 (25) .98 (25) 1.30 (33) 1.30 (33) 1.61 (41) .59 (15) .79 (20) .79 (20) .79 (20) .79 (20) .67 (17) .98 (25) .98 (25) 1.18 (30) 1.18 (30) 1.18 (30) 1.26 (32) 1.22 (31) 1.57 (40) AP-0916-BR AP-1120-BR AP-1320-BR AP-1625-BR F TL TL (AT-xxxx-BR) (AN-xxxx-BR) Thread Adapters: NPT to Metric Threads* Threads Male Male Thread Thread A A AT-1216-BR AT-1220-BR AT-1225-BR AT-3425-BR AT-1032-BR AT-5432-BR 1/2" NPT 1/2" NPT 1/2" NPT 3/4" NPT 1" NPT 1-1/4" NPT Female Female Thread Thread B B M16 x 1.5 M20 x 1.5 M25 x 1.5 M25 x 1.5 M32 x 1.5 M32 x 1.5 *Note: O-Ring not included. See page 56 for thread specifications. Female Thread B F TL H Wrench Flat Thread Length Height PG 9 PG 11 PG 13/13.5 PG 16 PG 21 PG 21 PG 29 1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT 3/4" NPT 1" NPT .94 (24) .94 (24) .94 (24) .94 (24) 1.18 (30 1.18 (30) 1.57 (40) .24 (6) .24 (6) .26 (6.5) .26 (6.5) .28 (7) .28 (7) .31 (8) .94 (24) .89 (22.7) .93 (23.5) .91 (23) .59 (15) .94 (24) .79 (20) Threads Dimensions in Inches (mm) Male Male Thread Thread A A Female Female Thread Thread B B D TL H Outer Diameter Thread Length Height PG 9 PG 11 PG 13/13.5 PG 16 M16 x 1.5 M20 x 1.5 M20 x 1.5 M25 x 1.5 .79 (20) .87 (22) .87 (22) 1.06 (27) .24 (6) .26 (6.5) .26 (6.5) .26 (6.5) .65 (16.5) .75 (19) .75 (19) .83 (21) Part Numbers Threads Dimensions in Inches (mm) Male Male Thread Thread A A Female Female Thread Thread B B D TL H Outer Diameter Thread Length Height M16 x 1.5 M20 x 1.5 M20 x 1.5 M20 x 1.5 M25 x 1.5 M25 x 1.5 M32 x 1.5 PG 9 PG 11 PG 13/13.5 PG 16 PG 16 PG 21 PG 29 .79 (20) .87 (22) .87 (22) .94 (24) 1.10 (28) 1.18 (30) 1.54 (39) .24 (6) .26 (6.5) .26 (6.5) .26 (6.5) .26 (6.5) .26 (6.5) .28 (7) .65 (16.5) .75 (19) .75 (19) .75 (19) .75 (19) .83 (21) .91 (23) F H Part Numbers Male Thread A Thread ThreadAdapters: Adapters:Metric PG totoNPT PGThreads Threads* *Note: O-Ring not included H Dimensions in Inches (mm) Thread Adapters: PG to Metric Threads* Thread ThreadAdapters: Adapters:NPT PG totoNPT PG Threads* Threads Part Numbers Part Numbers Nickel Plated Brass w/ Buna-N O-Ring Threads Adapters, Reducers & Enlargers Dealing with foreign products? Is connecting a challenge? Well, look no further! AF-1609-BR AF-2011-BR ZF-2013-BR AF-2016-BR AF-2516-BR AF-2521-BR AF-3229-BR Dimensions in Inches (mm) F TL H Wrench Flat Thread Length Height .98 (25) .98 (25) 1.26 (32) 1.24 (31.6) 1.50 (38) 1.67 (42.5) .79 (20) .79 (20) .79 (20) .75 (19) .98 (25) .59 (15) 1.18 (30) 1.18 (30) 1.18 (30) 1.18 (30) 1.61 (41) 1.30 (33) Thread ThreadAdapters: Adapters:Metric PG totoNPT NPTThreads Threads Part Numbers Threads Dimensions in Inches (mm) Male Male Thread Thread A A Female Female Thread Thread B B F TL H Wrench Flat Thread Length Height M16 x 1.5 M20 x 1.5 M25 x 1.5 M25 x 1.5 M32 x 1.5 M32 x 1.5 1/2" NPT 1/2" NPT 1/2" NPT 3/4" NPT 1" NPT 1-1/4" NPT .94 (24) .94 (24) 1.18 (30) 1.18 (30) 1.57 (40) 1.81 (46) .24 (6) .24 (6) .28 (7) .28 (7) .31 (8) .31 (8) .91 (23) .91 (23) .59 (15) 1.07 (26) 1.30 (33) 1.30 (33) Nickel Plated Brass w/ Buna-N O-Ring AM-1612-BR AM-2012-BR AM-2512-BR AM-2534-BR AM-3210-BR AM-3254-BR www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 35 Accessories - Thread Adapters - Nylon / Polypropylene Hex & Round - PG / NPT / Metric Threads Black Nylon/Polypropylene* - Thread Adapters: Metric to PG Threads Part Numbers F Adapters, Reducers & Enlargers B Threads Male Thread A TL d A F B Female TL Thread Thread B See page 56 Length H d F Height Inner Diameter Wrench Flat A C* A B A A A A C C* .79 (20) 1.34 (34) .83 (21) .55 (14) .87 (22) .98 (25) .98 (25) 1.14 (29) .79 (20) 1.38 (35) .26 (6.5) .33 (8.5) .55 (14) .71 (18) .71 (18) .98 (25) 1.30 (33) 1.69 (43) 2.05 (52) 2.01 (51) .67 (17) N/A .98 (25) 1.14 (29) 1.14 (29) 1.43 (36) 1.77 (45) 2.17 (55) N/A N/A for thread specs H Type A AF-1207-BK AF-1609-BK AF-2013-BK AF-2513-BK AF-2516-BK AF-3221-BK AF-4029-BK AF-5036-BK AF-6342-BK AF-6348-BK PG 7 M12 x 1.5 PG 9 M16 x 1.5 PG 13 M20 x 1.5 M25 x 1.5 PG 13 / 13.5 PG 16 M25 x 1.5 PG 21 M32 x 1.5 PG 29 M40 x 1.5 PG 36 M50 x 1.5 PG 42 M63 x 1.5 PG 48 M63 x 1.5 *Note: Parts are made of Polypropylene. Type B H TL Threads Male Thread A Female Thread B PG 7 PG 9 PG 9 PG 11 PG 11 PG 13 / 13.5 PG 13 PG 16 PG 16 PG 21 PG 21 PG 29 PG 29 PG 36 PG 36 PG 42 PG 42 PG 48 PG 48 M12 x 1.5 M12 x 1.5 M16 x 1.5 M16 x 1.5 M20 x 1.5 M16 x 1.5 M20 x 1.5 M20 x 1.5 M25 x 1.5 M25 x 1.5 M32 x 1.5 M32 x 1.5 M40 x 1.5 M40 x 1.5 M50 x 1.5 M40 x 1.5 M50 x 1.5 M50 x 1.5 M63 x 1.5 B H TL d A B F Type D AP-0712-BK AP-0912-BK AP-0916-BK AP-1116-BK AP-1120-BK AP-1316-BK AP-1320-BK AP-1620-BK AP-1625-BK AP-2125-BK AP-2132-BK AP-2932-BK AP-2940-BK AP-3640-BK AP-3650-BK AP-4240-BK AP-4250-BK AP-4850-BK AP-4863-BK Adapter Type See page 56 for thread specs C* C A C C* B A A A C A C A C C* C C* C C* Dimensions in Inches (mm) TL H d F Thread Length Height Inner Diameter Wrench Flat .59 (15) .59 (15) .31 (8) .59 (15) .59 (15) .31 (8) .31 (8) .31 (8) .31 (8) .59 (15) .31 (8) .59 (15) .39 (10) .59 (15) .59 (15) .59 (15) .59 (15) .59 (15) .59 (15) 1.34 (34) 1.34 (34) .79 (20) 1.34 (34) 1.34 (34) .55 (14) .83 (21) .83 (21) .91 (23) 1.34 (34) .91 (23) 1.34 (34) 1.06 (27) .79 (20) 1.36 (34.5) .79 (20) 1.36 (34.5) .79 (20) 1.38 (35) .24 (6) .33 (8.5) .35 (9) .45 (11.5) .45 (11.5) .55 (14) .55 (14) .63 (16) .63 (16) .81 (20.5) .83 (21) 1.10 (28) 1.18 (30) 1.50 (38) 1.46 (37) 1.50 (38) 1.69 (43) 1.50 (38) 1.89 (48) N/A N/A .83 (21) N/A N/A .98 (25) .98 (25) 1.06 (27) 1.18 (30) N/A 1.46 (37) N/A 1.77 (45) N/A N/A N/A N/A N/A N/A Black Nylon Thread- Thread Adapters: Adapters: PG to NPT PG Threads to NPT Threads H Part Numbers TL .31 (8) .59 (15) .31 (8) .31 (8) .31 (8) .39 (10) .39 (10) .47 (12) .59 (15) .59 (15) Black Nylon/Polypropylene* - Thread Adapters: PG to Metric Threads Part Numbers d A Type C Dimensions in Inches (mm) Adapter Type Threads Male Thread A d A Adapter Type Dimensions in Inches (mm) Female TL Thread Thread B See page 56 Length H d F Height Inner Diameter Wrench Flat .28 (7) .35 (9) .83 (21) .91 (23) N/A N/A .94 (24) .94 (24) for thread specs AG-1112-BK AG-1312-BK B PG 11 1/2" NPT PG 13 / 13.5 1/2" NPT D D Black Nylon - Thread Adapters: Metric to NPT Threads F Type E H Part Numbers Male Thread A TL d A Operating Temperature (Metric to PG & PG to Metric Nylon Adapters): -4F to 176F (-20C to 80C) 36 Threads AM-1612-BK AM-2012-BK M16 x 1.5 M20 x 1.5 Adapter Type Dimensions in Inches (mm) TL Female Thread Thread B See page 56 Length H d F Height Inner Diameter Wrench Flat 1.10 (28) 1.06 (27) N/A N/A 1.02 (26) 1.02 (26) for thread specs 1/2" NPT 1/2" NPT E E .28 (7) .28 (7) www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Accessories - Thread Reducers - Nickel Plated Brass Hex & Round - PG / NPT / Metric Threads Is your thread size off by one size? RoHS * Thread Reducers: PG to PG Threads Part Numbers TL D/F D H H TL TL (RQ-xxxx-BR, RP-xxxx-BR & RM-xxxx-BR) (RR-xxxx-BR) Thread Reducers: Metric to Metric Threads* Part Numbers Threads Male Thread A Female Thread B Dimensions in Inches (mm) D TL H Outer Diameter Thread Length Height .71 (18) .94 (24) .94 (24) 1.18 (30) 1.18 (30) 1.54 (39) 1.54 (39) 1.69 (43) 1.69 (43) 2.24 (57) 2.24 (57) 2.52 (64) 2.52 (64) .24 (6) .26 (6.5) .26 (6.5) .28 (7) .28 (7) .31 (8) .31 (8) .31 (8) .35 (9) .39 (10) .39 (10) .39 (10) .39 (10) Without O-Ring Threads Male Thread A w/ Buna-N O-Ring without O-Ring RQ-0907-BR RQ-1107-BR RQ-1109-BR RQ-1309-BR RQ-1311-BR RQ-1609-BR RQ-1611-BR RQ-1613-BR RQ-2111-BR RQ-2113-BR RQ-2116-BR RQ-2916-BR RQ-2921-BR RQ-3621-BR RQ-3629-BR RQ-4229-BR RQ-4236-BR RQ-4836-BR RQ-4842-BR RP-0907-BR RP-1107-BR RP-1109-BR RP-1309-BR RP-1311-BR RP-1609-BR RP-1611-BR RP-1613-BR RP-2111-BR RP-2113-BR RP-2116-BR RP-2916-BR RP-2921-BR RP-3621-BR RP-3629-BR RP-4229-BR RP-4236-BR RP-4836-BR RP-4842-BR Female Thread B PG 9 PG 7 PG 11 PG 7 PG 11 PG 9 PG 13/13.5 PG 9 PG 13/13.5 PG 11 PG 16 PG 9 PG 16 PG11 PG 16 PG 13/13.5 PG 21 PG 11 PG 21 PG 13/13.5 PG 21 PG 16 PG 29 PG 16 PG 29 PG 21 PG 36 PG 21 PG 36 PG 29 PG 42 PG 29 PG 42 PG 36 PG 48 PG 36 PG 48 PG 42 Dimensions in Inches (mm) D TL H Outer Diameter Thread Length Height .67 (17) .79 (20) .79 (20) .87 (22) .87 (22) .94 (24) .94 (24) .94 (24) 1.18 (30) 1.18 (30) 1.18 (30) 1.57 (40) 1.57 (40) 1.97 (50) 1.97 (50) 2.24 (57) 2.24 (57) 2.52 (64) 2.52 (64) .24 (6) .24 (6) .24 (6) .26 (6.5) .26 (6.5) .26 (6.5) .26 (6.5) .26 (6.5) .28 (7) .28 (7) .28 (7) .31 (8) .31 (8) .35 (9) .35 (9) .39 (10) .39 (10) .39 (10) .39 (10) .34 (8.8) .35 (9) .35 (9) .37 (9.5) .37 (9.5) .37 (9.5) .37 (9.5) .37 (9.5) .41 (10.3) .41 (10.3) .41 (10.3) .45 (11.5) .45 (11.5) .49 (12.5) .49 (12.5) .53 (13.5) .53 (13.5) .53 (13.5) .53 (13.5) .33 (8.5) Reducers .35 (9) Thread Reducers: Metric to Metric Threads are also .35 (9) available with Part Numbers Threads Dimensions in Inches (mm) .39 (10) the following .39 (10) Female H Male F TL approvals: .45 (11.5) Thread Thread Wrench Thread Height .45 (11.5) B A Flat Length .45 (11.5) www.SealconEX.com w/ Buna-N .49 (12.5) O-Ring .55 (14) .67 (17) .20 (5) .31 (8) M16 x 1.5 M12 x 1.5 RM-1612-BR .55 (14) .87 (22) .24 (6) .35 (9) M20 x 1.5 M12 x 1.5 RM-2012-BR .55 (14) .87 (22) .24 (6) .35 (9) M20 x 1.5 M16 x 1.5 RM-2016-BR .55 (14) .28 (7) .39 (10) M25 x 1.5 M16 x 1.5 1.06 (27) RM-2516-BR .28 (7) .39 (10) M25 x 1.5 M20 x 1.5 1.06 (27) RM-2520-BR Thread Reducers: PG to PG Threads .31 (8) .43 (11) M32 x 1.5 M16 x 1.5 1.34 (34) RM-3216-BR Part Numbers Threads Dimensions in Inches (mm) .31 (8) .43 (11) M32 x 1.5 M20 x 1.5 1.34 (34) RM-3220-BR .31 (8) .43 (11) M32 x 1.5 M25 x 1.5 1.34 (34) RM-3225-BR Male Female D TL H 1.46 (43) .31 (8) .47 (12) M40 x 1.5 RM-4020-BR M20 x 1.5 Thread Thread Outer Thread Height .31 (8) .47 (12) M40 x 1.5 M25 x 1.5 1.46 (43) RM-4025-BR A B Diameter Length .31 (8) .47 (12) M40 x 1.5 M32 x 1.5 1.46 (43) RM-4032-BR Without .35 (9) .51 (13) M50 x 1.5 M25 x 1.5 2.17 (55) RM-5025-BR O-Ring .35 (9) .51 (13) M50 x 1.5 M32 x 1.5 2.17 (55) RM-5032-BR RR-0907-BR PG 7 .33 (8.5) .24 (6) PG 9 .67 (17) .35 (9) .51 (13) M50 x 1.5 M40 x 1.5 2.17 (55) RM-5040-BR RR-1107-BR PG 7 .33 (8.5) .24 (6) PG 11 .79 (20) .39 (10) .55 (14) M63 x 1.5 M32 x 1.5 2.56 (65) RM-6332-BR RR-1109-BR PG 9 .33 (8.5) .24 (6) PG 11 .79 (20) .39 (10) .55 (14) M63 x 1.5 M40 x 1.5 2.56 (65) RM-6340-BR RR-1309-BR PG 13/13.5 PG 9 .35 (9) .26 (6.5) .87 (22) .39 (10) .55 (14) M63 x 1.5 M50 x 1.5 2.56 (65) RM-6350-BR RR-1311-BR PG 13/13.5 PG 11 .35 (9) .26 (6.5) .87 (22) *Note: German Lloyd Approval applies to Hex Reducers RR-1609-BR PG 9 .37 (9.5) .26 (6.5) PG 16 .94 (24) RR-1611-BR PG 11 .37 (9.5) .26 (6.5) PG 16 .94 (24) Thread Reducers: NPT to NPT Threads RR-1613-BR PG 13/13.5 .94 (24) .37 (9.5) .26 (6.5) PG 16 RR-2111-BR PG 11 .39 (10) .28 (7) PG 21 1.18 (30) Part Numbers Threads Dimensions in Inches (mm) RR-2113-BR PG 13/13.5 1.18 (30) .39 (10) .28 (7) PG 21 Male Female D TL H RR-2116-BR PG 16 .39 (10) .28 (7) PG 21 1.18 (30) Thread Thread RR-2916-BR .45 (11.5) .31 (8) 1.54 (39) PG 16 PG 29 Outer Thread Height .45 (11.5) .31 (8) 1.54 (39) RR-2921-BR PG 21 PG 29 A B Diameter Length .49 (12.5) .35 (9) 1.97 (50) RR-3621-BR PG 21 PG 36 .49 (12.5) .35 (9) 1.97 (50) RR-3629-BR PG 29 PG 36 .55 (14) .39 (10) 2.24 (57) RR-4229-BR PG 29 PG 42 1/2" NPT 1.18 (30) .71 (18) .87 (22) RN-3412-BR* 3/4" NPT .55 (14) .39 (10) 2.24 (57) RR-4236-BR PG 36 PG 42 3/4" NPT 1.30 (33) .98 (25) 1.14 (29) RN-1034-BR* 1" NPT .55 (14) .39 (10) 2.52 (64) RR-4836-BR PG 36 PG 48 1" NPT 1.69 (43) .98 (25) 1.14 (29) RN-5410-BR* 1-1/4" NPT .55 (14) 2.52 (64) .39 (10) RR-4842-BR PG 42 PG 48 RR-1612-BR RR-2012-BR RR-2016-BR RR-2516-BR RR-2520-BR RR-3220-BR RR-3225-BR RR-4025-BR RR-4032-BR RR-5032-BR RR-5040-BR RR-6340-BR RR-6350-BR M16 x 1.5 M20 x 1.5 M20 x 1.5 M25 x 1.5 M25 x 1.5 M32 x 1.5 M32 x 1.5 M40 x 1.5 M40 x 1.5 M50 x 1.5 M50 x 1.5 M63 x 1.5 M63 x 1.5 M12 x 1.5 M12 x 1.5 M16 x 1.5 M16 x 1.5 M20 x 1.5 M20 x 1.5 M25 x 1.5 M25 x 1.5 M32 x 1.5 M32 x 1.5 M40 x 1.5 M40 x 1.5 M50 x 1.5 See page 56 for thread specifications. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 37 Adapters, Reducers & Enlargers These Reducers will solve that threading problem. They convert holes which fit PG, NPT or Metric threads to a smaller F female thread of the same thread type. Operating Temperature H (Hex Nickel Plated Brass Reducers with Buna-N O-Ring): (RN-xxxx-BR) -40C to 100C (-40F to 212F) Accessories - Thread Reducers - Nylon / Polypropylene Hex & Round - PG / NPT / Metric Threads Gray Nylon - Thread Reducers: PG to PG Threads* Part Numbers Adapters, Reducers & Enlargers Type A -4F to 156F (-20C to 70C) D Threads Male Thread A Female Thread B Adapter Type Dimensions in Inches (mm) TL H D F Thread Length Height Outer Diameter Wrench Flat .31 (8) .31 (8) .31 (8) .35 (9) .39 (10) .39 (10) .39 (10) .43 (11) .43 (11) .43 (11) .43 (11) .55 (14) .71 (18) .47 (12) .83 (21) .51 (13) .51 (13) .98 (25) .53 (13.5) .53 (13.5) .53 (13.5) .59 (15) .75 (19) .89 (22.5) 1.06 (27) 1.0 (25.5) 1.14 (29) 1.14 (29) 1.13 (28.5) 1.42 (36) 1.42 (36) 1.81 (46) 2.28 (58) .59 (15) .75 (19) N/A .87 (22) N/A N/A .94 (24) N/A N/A N/A N/A H TL Type B D B B A B A A B A A A A PG 7 PG 9 PG 9 PG 11 PG 9 PG 13/13.5 PG 11 PG 13/13.5 PG 9 PG 16 PG11 PG 16 PG 13/13.5 PG 16 PG 13/13.5 PG 21 PG 16 PG 21 PG 21 PG 29 PG 29 PG 36 RR-0907-GY RR-1109-GY RR-1309-GY RR-1311-GY RR-1609-GY RR-1611-GY RR-1613-GY RR-2113-GY RR-2116-GY RR-2921-GY RR-3629-GY B A Gray Nylon - Thread Reducers: Metric to Metric Threads* B Part Numbers F H Threads -40F to 176F (-40C to 80C) Male Thread A Female Thread B RR-1612-GY RR-2016-GY RR-2520-GY RR-3225-GY RR-4032-GY RR-5040-GY RR-6350-GY M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5 M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 Adapter Type Dimensions in Inches (mm) TL H D F Thread Length Height Outer Diameter Wrench Flat .35 (9) .35 (9) .39 (10) .47 (12) .47 (12) .55 (14) .59 (15) .63 (16) .63 (16) .67 (17) .75 (19) .75 (19) .83 (21) .87 (22) .94 (24) 1.06 (27) 1.26 (32) 1.57 (40) 2.01 (51) 2.40 (61) 2.95 (75) .87 (22) .94 (24) 1.14 (29) 1.42 (36) 1.81 (46) 2.17 (55) 2.56 (65) TL A C C C C C C C Black Nylon - Thread Reducers: Metric to Metric Threads* Part Numbers Type C Black Nylon Type C Gray Nylon B Threads -4F to 176F (-20C to 80C) Male Thread A Female Thread B RM-1612-BK RM-2016-BK RM-2520-BK RM-3225-BK RM-4032-BK RM-5040-BK RM-6350-BK M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5 M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 Adapter Type Dimensions in Inches (mm) TL H d F Thread Length Height Inner Diameter Wrench Flat .31 (8) .31 (8) .31 (8) .39 (10) .59 (15) .59 (15) .59 (15) .24 (6) .55 (14.1) .55 (14.1) .64 (16.1) .79 (20) .79 (20) .79 (20) .39 (10) .53 (13.5) .71 (18) .91 (23) 1.18 (30) 1.50 (38) 1.89 (48) .79 (20) .98 (25) 1.14 (29) 1.42 (36) N/A N/A N/A F H TL d A C C C C D D D Black Polypropylene - Thread Reducers: NPT to NPT Threads* B Part Numbers Threads -4F to 176F (-20C to 80C) Male Thread A Female Thread B RB-3412-02 RB-3438-02 RB-1012-02 RB-1034-02 RB-1214-02 RB-1238-02 3/4" NPT 3/4" NPT 1" NPT 1" NPT 1/2" NPT 1/2" NPT 1/2" NPT 3/8" NPT 1/2" NPT 3/4" NPT 1/4" NPT 3/8" NPT H Adapter Type Dimensions in Inches (mm) TL H d Thread Length Height Inner Diameter .64 (16.2) .63 (15.9) .65 (16.5) .65 (16.5) .57 (14.4) .57 (14.4) .89 (22.5) 88 (22.2) .90 (22.9) .90 (22.9) .81 (20.7) .82 (20.9) .70 (17.7) .70 (17.7) .91 (23.1) .92 (23.4) .56 (14.2) .56 (14.2) TL Type D A See page 56 for thread specifications. 38 d *Note: O-Ring not Included C C C C C C www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Accessories - Thread Reducers (303) Stainless Steel Hex - PG / Metric Threads 303 Stainless Steel Thread Reducers: Metric to Metric Threads -4F to 203F (-20C to 95C) Without O-Ring With Buna-N O-Ring RM-1612-SS RM-2012-SS RM-2016-SS RM-2516-SS RM-2520-SS RM-3216-SS RM-3220-SS RM-3225-SS RM-4020-SS RM-4025-SS RM-4032-SS RM-5025-SS RM-5032-SS RM-5040-SS RM-6332-SS RM-6340-SS RM-6350-SS RM-1612-SS-B RM-2012-SS-B RM-2016-SS-B RM-2516-SS-B RM-2520-SS-B RM-3216-SS-B RM-3220-SS-B RM-3225-SS-B RM-4020-SS-B RM-4025-SS-B RM-4032-SS-B RM-5025-SS-B RM-5032-SS-B RM-5040-SS-B RM-6332-SS-B RM-6340-SS-B RM-6350-SS-B Threads Dimensions in Inches (mm) Male Thread A Female Thread B F TL H Wrench Flat Thread Length Height M16 x 1.5 M20 x 1.5 M20 x 1.5 M25 x 1.5 M25 x 1.5 M32 x 1.5 M32 x 1.5 M32 x 1.5 M40 x 1.5 M40 x 1.5 M40 x 1.5 M50 x 1.5 M50 x 1.5 M50 x 1.5 M63 x 1.5 M63 x 1.5 M63 x 1.5 M12 x 1.5 M12 x 1.5 M16 x 1.5 M16 x 1.5 M20 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 .67 (17) .87 (22) .87 (22) 1.06 (27) 1.06 (27) 1.34 (34) 1.34 (34) 1.34 (34) 1.46 (43) 1.46 (43) 1.46 (43) 2.17 (55) 2.17 (55) 2.17 (55) 2.56 (65) 2.56 (65) 2.56 (65) .20 (5) .24 (6) .24 (6) .28 (7) .28 (7) .31 (8) .31 (8) .31 (8) .31 (8) .31 (8) .31 (8) .35 (9) .35 (9) .35 (9) .39 (10) .39 (10) .39 (10) .35 (9) .37 (9.5) .37 (9.5) .41 (10.5) .41 (10.5) .49 (12.5) .49 (12.5) .49 (12.5) .51 (13) .51 (13) .51 (13) .59 (15) .59 (15) .59 (15) .65 (16.5) .65 (16.5) .65 (16.5) Adapters, Reducers & Enlargers Part Numbers The 316L material is much harder and ideal for direct exposure to salt water and chemical solutions in marine, off-shore, pharmaceutical, etc. 316L Stainless Steel Reducers are produced upon request only. Please allow for longer delivery times! Adapter, Reducer & Enlarger Applications: * International machine builder & equipment * Import / Export oriented projects * Adapting to domestic markets 303 Stainless Steel Thread Reducers: Metric to Metric Threads Threads Part Numbers -4F to 203F (-20C to 95C) Without O-Ring RP-0907-SS RP-1107-SS RP-1109-SS RP-1309-SS RP-1311-SS RP-1609-SS RP-1611-SS RP-1613-SS RP-2111-SS RP-2113-SS RP-2116-SS RP-2916-SS RP-2921-SS RP-3621-SS RP-3629-SS RP-4229-SS RP-4236-SS RP-4836-SS RP-4842-SS With Buna-N O-Ring RQ-0907-SS RQ-1107-SS RQ-1109-SS RQ-1309-SS RQ-1311-SS RQ-1609-SS RQ-1611-SS RQ-1613-SS RQ-2111-SS RQ-2113-SS RQ-2116-SS RQ-2916-SS RQ-2921-SS RQ-3621-SS RQ-3629-SS RQ-4229-SS RQ-4236-SS RQ-4836-SS RQ-4842-SS Male Thread A Female Thread B PG 9 PG 7 PG 11 PG 7 PG 11 PG 9 PG 13/13.5 PG 9 PG 13/13.5 PG 11 PG 16 PG 9 PG 16 PG 11 PG 16 PG 13/13.5 PG 21 PG 11 PG 21 PG 13/13.5 PG 21 PG 16 PG 29 PG 16 PG 29 PG 21 PG 36 PG 21 PG 36 PG 29 PG 42 PG 29 PG 42 PG 36 PG 48 PG 36 PG 48 PG 42 F Wrench Flat TL Thread Length H Height .67 (17) .87 (22) .87 (22) .87 (22) .87 (22) .94 (24) .94 (24) .94 (24) 1.18 (30) 1.18 (30) 1.18 (30) 1.57 (40) 1.57 (40) 1.97 (50) 1.97 (50) 2.24 (57) 2.24 (57) 2.52 (64) 2.52 (64) .24 (6) .24 (6) .24 (6) .26 (6.5) .26 (6.5) .26 (6.5) .26 (6.5) .26 (6.5) .28 (7) .28 (7) .28 (7) .31 (8) .31 (8) .35 (9) .35 (9) .39 (10) .39 (10) .39 (10) .39 (10) .34 (8.8) .35 (9) .35 (9) .37 (9.5) .37 (9.5) .37 (9.5) .37 (9.5) .37 (9.5) .41 (10.3) .41 (10.3) .41 (10.3) .45 (11.5) .45 (11.5) .49 (12.5) .49 (12.5) .53 (13.5) .53 (13.5) .53 (13.5) .53 (13.5) H TL Buna-N O-Rings can be substituted with Silicone or FKM O-Rings (see page 29). To order, add "-S" (Silicone) or "-V" (FKM) to part number (e.g. RM-1612-SS-V). See page 56 for thread specifications. F Dimensions in Inches (mm) Reducers are also available with the following approvals: www.SealconEX.com www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 39 Accessories - Thread Enlargers - Nylon, Polypropylene & Nickel Plated Brass - Hex - PG/Metric Threads Black Nylon/Polypropylene - Thread Enlargers: Metric to Metric Threads Part Numbers Threads Adapters, Conduit Reducers Systems & Enlargers Male Thread A Female Thread B Adapter Type RoHS Black Nylon Operating Temperature: -4F to 176F (-20C to 80C) Dimensions in Inches (mm) TL Thread Length H Height d Inner Diameter F Wrench Flat F B H EM-1216-BK EM-1620-BK EM-2025-BK EM-2532-BK EM-3240-BK EM-4050-BK EM-5063-BK M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5 A A A C* C* C* C* .31 (8) .31 (8) .31 (8) .59 (15) .59 (15) .59 (15) .59 (15) .47 (12) .51 (13) .59 (15) .59 (15) .77 (19.5) .77 (19.5) .79 (20) .26 (6.5) .35 (9) .55 (14) .65 (16.5) .91 (23) 1.18 (30) 1.54 (39) .83 (21) .98 (25) 1.18 (30) N/A N/A N/A N/A TL d A Type A Nickel Plated Brass: Metric to Metric Threads Part Numbers Threads Male Thread A EP-0709-BR EP-0911-BR EP-0913-BR EP-1113-BR EP-1116-BR EP-1121-BR EP-1316-BR RP-1321-BR EP-1621-BR EP-1629-BR EP-2129-BR EP-2936-BR EP-3642-BR EP-4248-BR Female Thread B PG 7 PG 9 PG 9 PG 11 PG 9 PG 13/13.5 PG 11 PG 13/13.5 PG 11 PG 16 PG 11 PG 21 PG 13/13.5 PG 16 PG 13/13.5 PG 21 PG 16 PG 21 PG 16 PG 29 PG 21 PG 29 PG 29 PG 36 PG 36 PG 42 PG 42 PG 48 Is your thread size off by one size? Dimensions in Inches (mm) D TL H Outer Diameter Thread Length Height .67 (17) .79 (20) .87 (22) .87 (22) .94 (24) 1.18 (30) .94 (24) 1.18 (30) 1.18 (30) 1.54 (39) 1.54 (39) 1.97 (50) 2.24 (57) 2.52 (64) .20 (5) .24 (6) .24 (6) .24 (6) .24 (6) .24 (6) .26 (6.5) .26 (6.5) .26 (6.5) .26 (6.5) .28 (7) .31 (8) .35 (9) .39 (10) These Enlargers will solve that threading problem. Type C B They convert holes which fit PG, NPT or Metric threads to a larger female thread of the same thread type. .59 (15) .65 (16.5) .69 (17.5) .69 (17.5) .73 (18.5) .81 (20.5) .75 (19) .83 (21) .83 (21) .88 (22.5) .91 (23) 1.08 (27.5) 1.22 (31) 1.30 (33) H TL D A *Note: Parts are made of Polypropylene. Nickel Plated Brass: Metric to Metric Threads Part Numbers EM-1216-BR EM-1620-BR EM-2025-BR RM-2532-BR EM-3240-BR EM-4050-BR EM-5063-BR Threads Dimensions in Inches (mm) Male Thread A Female Thread B D Outer Diameter TL Thread Length H Height M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5 .71 (18) .87 (22) 1.06 (27) 1.34 (34) 1.65 (42) 2.09 (53) 2.60 (66) .20 (5) .24 (6) .26 (6.5) .26 (6.5) .28 (7) .35 (9) .35 (9) .59 (15) .69 (17.5) .75 (19) .83 (21) .91 (23) 1.22 (31) 1.22 (31) D B H TL More custom parts available online at www.SealconUSA.com or upon request! A Nickel Plated Brass: Metric to Metric Threads Part Numbers Threads Male Thread A EN-3812-BR EN-1234-BR EN-1210-BR EN-3410-BR EN-1054-BR 40 3/8" NPT 1/2" NPT 1/2" NPT 3/4" NPT 1" NPT Dimensions in Inches (mm) D Outer Diameter TL Thread Length H Height 1.10 (28) 1/2" NPT 1.10 (28) 3/4" NPT 1.36 (34.5) 1" NPT 1.38 (35) 1" NPT 1-1/4" NPT 1.73 (44) .59 (15) .79 (20) .79 (20) .71 (18) .94 (24) 1.50 (38) 1.50 (38) 1.75 (44.5) 1.69 (43) 1.97 (50) Female Thread B *Note: O-Ring not Included See page 56 for thread specifications. Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Conduit System Introduction Advantages: Electrical Conduit provides protection to enclosed single or multi-conductors from impact, moisture, and chemical vapors. Varying quantities, sizes, and types of conductors can be pulled into a Conduit, which simplifies design and construction compared to multiple runs of cables or the expense of customized composite cables. Conduit Systems Conduit Systems can be made waterproof. Cable connections between fixed and moving parts are weak spots in machine & system installations. When cables are bent, individual tensioned conductors have no room for flexing. They are subjected to high and variable tension forces, particularly multi-conductor cables. To prevent conductor breakages, the use of Conduit tubing is recommended. * Individual conductors are given sufficient flexibility to help prevents tension stress. * Connections provide security against penetration of fluids. NYLON (POLYAMIDE) STANDARD SERIES Flexible Polyamide cable conduit, standard and split options with removable fittings. Poleon Solid PoleonFit PoleonFit DUO-PA Poleon Slit PoleonFit 90 PoleonFit Y IP 55 IP 55 IP 66 PoleonFit T PoleonFit Snap 90 IP 67 PoleonFiT DUO-Ms PoleonFit N Bulkhead Fitting Elbow Turn to Seal PoleonFit Clip Straight Turn to Seal with & without thread NYLON (POLYAMIDE) SUPERFLEX SERIES Higher flexibility, an ideal solution for drag chain & robotic cables. Superflex IP 54, 65 Straight Turn Elbow Turn PoleonFit to Seal IP 55 to Seal PoleonFit 90 IP 55 PoleonFit Y PoleonFit Snap 90 PoleonFit N PoleonFit Clip IP 66 METAL MELEON STANDARD SERIES Cable conduit made of galvanized steel with a PVC shell and braided option (all fittings are removable). Meleon A IP 40 MeleonFit Meleon B IP 54 IP 65 MeleonFit S IP 54 METAL MELEON PRO SERIES Cable conduit made of galvanized steel with a PVC shell and braided option (all fittings are removable). Meleon Pro A Meleon Pro B Meleon Pro C MeleonFit Pro MeleonFit Pro S MeleonFit Clip IP 65 IP 67 IP 40 IP 54 IP 65 www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 41 Conduit System - Nylon (Polyamide) Standard Series Solid & Slit RoHS M Nylon Poleon Solid: Polyamide - UL 94 Conduit Systems Part Numbers DN Size -40F to 248F (-40C to 120C) Male Thread A SM-0610-BK SM-0811-BK SM-1013-BK SM-1216-BK SM-1419-BK SM-1721-BK SM-2328-BK SM-2934-BK SM-3642-BK SM-4854-BK 6 8 10 12 14 17 23 29 37 50 Nylon Poleon Slit: Polyamide Dimensions in Inches (mm) d D Inner Outer Roll Diameter Diameter Length (ft.) .26 (6.5) .33 (8.5) .39 (10) .47 (12) .56 (14.2) .65 (16.5) .91 (23) 1.14 (29) 1.42 (36) 1.89 (48) .39 (10) .45 (11.4) .51 (13) .62 (15.8) .72 (18.4) .83 (21.2) 1.12 (28.4) 1.36 (34.5) 1.67 (42.5) 2.15 (54.5) 328 164 328 164 164 164 164 82 82 82 15 25 25 35 35 40 45 55 65 80 Part Numbers DN Size -40F to 248F (-40C to 120C) Male Thread A PS-0610-BK PS-1013-BK PS-1216-BK PS-1418-BK PS-1721-BK PS-2328-BK PS-2935-BK PS-3743-BK PS-5055-BK 6 10 12 14 17 23 29 37 50 Dimensions in Inches (mm) d D Roll Inner Outer Diameter Diameter Length (Ft.) .26 (6.5) .39 (10) .47 (12) .56 (14.2) .65 (16.5) .91 (23) 1.14 (29) 1.42 (36) 1.89 (48) .39 (10) .51 (13) .62 (15.8) .72 (18.4) .83 (21.2) 1.12 (28.4) 1.36 (34.5) 1.67 (42.5) 2.15 (54.5) 15 25 35 35 40 45 55 65 80 328 328 164 164 164 164 82 82 82 d d D D RoHS RoHS Nylon Polyamide cable conduits are characterised by their particularly high degree of flexibility. Whether in the standard or slotted version, even extremely mobile applications are no problem for the Nylon Poleon conduit. The large number of matching fittings and accessories provide solutions for all conceivable installation situations. Conduit System - Nylon (Polyamide) Standard Series PoleonFit Clip Mounting Bracket * Quick assembly thanks to single-hole fixing * Simply snaps into conduit Mounting Brackets: Snap-In - Nylon Part Numbers Fits Poleon Conduit Size -22F to 176F (-30C to 80C) H Dimensions Inches (mm) H L Body Height Body Length .62 (15.7) .52 (13.1) .70 (17.75) .78 (19.75) .93 (23.5) 1.16 (27) 1.06 (30.4) 1.49 (37.9) 1.13 (28.7) 1.17 (29.8) 1.39 (35.2) 1.58 (40.2) 2.07 (52.6) 2.39 (60.7) 2.72 (69) 3.43 (87) C J E Height to Screw Screw Center Head Size Hole Size C E L J Mount Holds conduit securely in place. Material: Polyamide PA 6 * V0 Rated PFC10 PFC12 PFC14 PFC17 PFC23 PFC29 PFC37 PFC50 10 12 14 17 23 29 37 50 1.08 (27.5) .94 (24) 1.15 (29.3) 1.31 (33.2) 1.59 (40.5) 1.89 (48) 2.24 (57) 2.80 (71) .20 (5) .21 (5.3) .21 (5.3) .21 (5.3) .21 (5.3) .25 (6.5) .25 (6.5) .25 (6.5) .28 (7) .33 (8.3) .34 (8.5) .34 (8.5) .34 (8.5) .43 (11) .43 (11) .43 (11) Dome Fittings also available with the following approvals: For Material Specifications and Approval Information refer to page 52. 42 www.SealconEX.com www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Conduit System - Nylon (Polyamide) Standard Series PoleonFit N & PoleonFit Snap 90 RoHS M Push-In Conduit Fittings: Straight & Elbow - Nylon Part Numbers 56 for thread specs Elbow Fittings - Dimens. in Inches (mm) A TL H L F Clearance Hole Thread Length Body Height Body Length Wrench Flat +.01" (+.25 mm) SM09AA-BK SM11AA-BK SM13AA-BK SM16AA-BK SM21AA-BK SM29AA-BK SM36AA-BK SM48AA-BK EM09AA-BK EM11AA-BK EM13AA-BK EM16AA-BK EM21AA-BK EM29AA-BK - PG 9 PG 11 PG 13/13.5 PG 16 PG 21 PG 29 PG 36 PG 48 10 12 14 17 23 29 37 50 .60 (15.2) .73 (18.5) .80 (20.3) .88 (22.3) 1.12 (28.4) 1.47 (37.3) 1.85 (47) 2.34 (59.4) .31 (8) .31 (8) .35 (9) .39 (10) .43 (11) .43 (11) .51 (13) .55 (14) .91 (23) .99 (25) 1.10 (28) 1.15 (29) 1.26 (32) 1.38 (35) 1.62 (41) 1.81 (46) .67 (17) .83 (21) .95 (24) 1.06 (27) 1.38 (35) 1.65 (42) 1.97 (50) 2.52 (64) .60 (15.2) .73 (18.5) .80 (20.3) .88 (22.3) 1.12 (28.4) 1.47 (37.3) - .31 (8) .31 (8) .35 (9) .39 (10) .43 (11) .43 (11) - 1.70 (43) 1.89 (48) 2.05 (52) 2.20 (56) 2.76 (70) 3.27 (83) - .91 (23) 1.06 (27) 1.20 (30.5) 1.28 (32.5) 1.57 (40) 2.03 (51.5) - .75 (19) .87 (22) .95 (24) 1.06 (27) 1.30 (33) 1.65 (42) - SM09NA-BK SM16NA-BK SM21NA-BK SM29NA-BK EM09NA-BK EM16NA-BK EM21NA-BK EM29NA-BK 3/8" NPT 1/2" NPT 3/4" NPT 1" NPT 10 17 23 29 .75 (19) 1.18 (30) 1.52 (38.5) 1.81 (46) .60 (15) .51 (13) .51 (13) .60 (15) .91 (23) 1.15 (29) 1.26 (32) 1.38 (35) .67 (17) 1.06 (27) 1.38 (35) 1.65 (42) .75 (19) 1.18 (30) 1.52 (38.5) 1.81 (46) .60 (15) .51 (13) .51 (13) .60 (15) 1.81 (46) 2.20 (56) 2.76 (70) 3.27 (83) .91 (23) 1.28 (32.5) 1.57 (40) 2.03 (51.5) .75 (19) 1.06 (27) 1.30 (33) 1.65 (42) SM16MA-BK SM20MA-BK SM25MA-BK SM32MA-BK EM16MA-BK EM20MA-BK EM25MA-BK EM32MA-BK M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 10 14 23 29 .79 (20) 1.04 (26.5) 1.52 (38.5) 1.81 (46) .31 (8) .35 (9) .43 (11) .43 (11) .91 (23) 1.10 (28) 1.26 (32) 1.38 (35) .67 (17) .95 (24) 1.38 (35) 1.65 (42) .79 (20) 1.04 (26.5) 1.52 (38.5) 1.81 (46) .31 (8) .35 (9) .43 (11) .43 (11) 1.70 (43) 2.05 (52) 2.76 (70) 3.27 (83) .91 (23) 1.20 (30.5) 1.57 (40) 2.03 (51.5) .75 (19) .95 (24) 1.30 (33) 1.65 (42) *O-Rings Included on Elbow Fittings F SM - (Straight) Push-In Conduit Fittings The fastest and most labor saving method to connect flexible Nylon Conduit to a Push-in Fitting. The Nylon Conduit is inserted into the Fitting until the hook snaps over the ridge of the Corrugated Tubing. The Conduit can be mounted rigid or turnable. * IP 54 rating can be obtained with an O-Ring * IP 65 rating can be obtained with a Fixed Installation D Thread Size O-Ring Groove Conduit Systems -4F to 176F (-20C to 80C) Thread Fits Straight Fittings - Dimens. in Inches (mm) Type & Nominal A TL L F Size Conduit Size Body Wrench Clearance Thread Length Length Flat Hole See page TL A L Suggested Clearance Hole for Non-Threaded Mounting H A combination of a unique 90 Snap Elbow and Straight Push-in Fitting. Elbow Fittings snap open & closed for easy installation of wires. TL EM - (90 Snap Elbows) Push-In Conduit Fittings D L Locking Ridge Inside F Thread Size SM & EM Fittings feature a Locking Ridge to hold Conduit Tubing in place. They also have an O-Ring groove for optional O-Ring installation. For Material Specifications and Approval Information refer to page 52. Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 43 Conduit System - Nylon (Polyamide) Standard Series PoleonFit, PoleonFit 90, PoleonFit Y PoleonFit: Polyamide - IP 55 Fits to Poleon DN d A D Clearance Inner Outer Hole Diameter Diameter See page 56 for thread specs TL L F Thread Length Body Length Wrench Size .43 (11) .43 (11) .43 (11) .43 (11) .51 (13) .63 (16) .63 (16) .63 (16) .63 (16) 1.02 (26) 1.02 (26) 1.04 (26.5) 1.22 (31) 1.30 (33) 1.53 (39) 1.69 (43) 1.79 (45.5) 1.87 (47.5) .59 (15) .71 (18) .79 (20) .91 (23) 1.06 (27) 1.34 (34) 1.57 (40) 1.97 (50) 2.44 (62) T TL 6 10 12 14 17 23 29 37 50 .47 (12) .63 (16) .63 (16) .79 (20) .79 (20) .98 (25) 1.26 (32) 1.57 (40) 1.97 (50) .27 (6.9) .43 (10.9) .43 (10.9) .58 (14.7) .60 (15.2) .74 (18.7) 1.01 (25.7) 1.29 (32.7) 2.02 (51.4) .74 (18.7) .85 (21.7) 1.02 (26) 1.10 (28) 1.26 (32) 1.56 (39.5) 1.83 (46.5) 2.19 (55.5) 2.66 (67.5) Thread Size +.01" (+.25 mm) M 12 X 1.5 M 16 X 1.5 M 16 X 1.5 M 20 X 1.5 M 20 X 1.5 M 25 X 1.5 M 32 X 1.5 M 40 X 1.5 M 50 X 1.5 PFM1206-BK PFM1610-BK PFM1612-BK PFM2014-BK PFM2017-BK PFM2523-BK PFM3229-BK PFM4037-BK PFM5050-BK Dimensions in Inches (mm) d Thread Type & Size F A Suggested Clearance Hole for Non-Threaded Mounting L PoleonFit 90: Polyamide - IP 55 Thread Fits to Dimensions in Inches (mm) Threads Type & Poleon DN A H d D TL Female Male Size Thread Clearance Inner Thread Height Outer Thread B A Hole Diameter Diameter Length See page 56 for thread specs PEM1206-BK PEM1610-BK PEM1612-BK PEM2014-BK PEM2017-BK PEM2523-BK L Length TL -22F to 176F (-30C to 80C) D Part Numbers RoHS H Conduit Systems -22F to 176F (-30C to 80C) D Part Numbers RoHS +.01" (+.25 mm) 6 10 12 14 17 23 M 12 X 1.5 M 16 X 1.5 M 16 X 1.5 M 20 X 1.5 M 20 X 1.5 M 25 X 1.5 .47 (12) .63 (16) .63 (16) .79 (20) .79 (20) .98 (25) .32 (8.2) .43 (10.9) .43 (10.9) .58 (14.7) .60 (15.2) .74 (18.7) .74 (18.7) .85 (21.7) 1.02 (26) 1.10 (28) 1.26 (32) 1.56 (39.5) .43 (11) .43 (11) .43 (11) .43 (11) .51 (13) .63 (16) 1.43 (36.3) 1.47 (37.3) 1.61 (41) 1.73 (44) 2.03 (51.5) 2.41 (61.2) 1.41 (35.7) 1.52 (38.5) 1.72 (43.8) 1.81 (46) 2.01 (51) 2.53 (64.3) d Thread Size L1 L PoleonFit Y: Polyamide - IP 66 Part Numbers H D A -40F to 248F (-40C to 120C) H Body Height E 56 for thread specs PFY100606 PFY121010 PFY171212 PFY231717 PFY292323 PFY372929 PFY503737 44 Threads Dimensions in Inches (mm) Thread Fits to Type & Poleon DN L1 E D A L Female Male Size Thread Thread Body Hole Outer Outer Upper B A Length Diameter Diameter Diameter Body See page Ring Length DN10/06/06 DN12/10/10 DN17/12/12 DN23/17/17 DN29/23/23 DN37/29/29 DN50/37/37 10/06/06 12/10/10 17/12/12 23/17/17 29/23/23 37/29/29 50/37/37 .20 (5) .22 (5.5) .26 (6.5) .26 (6.5) .26 (6.5) .26 (6.5) .26 (6.5) .83 (21.2) .83 (21.2) 1.29 (32.7) 2.72 (69.3) .87 (22.3) .87 (22.3) 1.22 (31) 2.91 (74) 1.10 (28) 1.10 (28) 1.26 (32) 3.35 (85) 1.43 (36.4) 1.43 (36.4) 1.50 (38) 3.56 (90.5) 1.70 (43) 1.70 (43) 1.46 (37) 4.17 (106) 2.07 (52.5) 2.07 (52.5) 1.90 (48.3) 4.95 (125.7) 2.62 (66.5) 2.62 (66.5) 2.08 (53) 5.04 (129) www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 1.11 (28.2) 1.65 (42) 2.01 (51) 2.51 (63.8) 3.02 (76.8) 3.78 (95.9) 4.31 (109.4) Conduit System - Nylon (Polyamide) Standard Series PoleonFit T - Straight PoleonFit DUO-PA PoleonFit T: Polyamide - IP 67 Part Numbers -40F to 248F (-40C to 120C) .20 (5) .22 (5.5) .26 (6.5) .26 (6.5) .26 (6.5) .83 (21.2) .87 (22.3) 1.10 (28) 1.43 (36.4) 1.70 (43) Conduit Systems 10 12 17 23 29 DN10 DN12 DN17 DN23 DN29 H PFT10 PFT12 PFT17 PFT23 PFT29 Threads Fits to Fits to Dimens. in In. (mm) Conduit Poleon DN H L Male Female Size Thread Thread Length Height A B L PoleonFit DUO-PA: Straight - Nylon Part Numbers Cable Range -40F to 212F (-40C to 100C) * Combination of Strain Relief & Conduit Fittings * Push-in system * Rotatable * Can be equipped with Multi-Hole inserts * Metal style can be changed to EMI/RFI * Metal Style also available in ATEX IP 68 (10 bar) Rotatable (Installation Side) IP 54 (Conduit Side) The DUO is an integrated Strain Relief / Conduit solution. D Thread Size F1/F A +.01" (+.25 mm) Inches (mm) RoHS L Thread Fits Type & Nominal A Size Conduit Clearance Size Hole TL Suggested Clearance Hole for Non-Threaded Mounting +.01" (+.25mm) Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. .20 - .39 (5-10) DUO11AA-BK PG 11 .12 - .28 (3-7) DUO11AR-BK .24 - .47 (6-12) DUO13AA-BK PG 13/13.5 .20 - .35 (5-9) DUO13AR-BK .39 -.55 (10-14) DUO16AA-BK PG 16 .28 - .47 (7-12) DUO16AR-BK DUO21AA-BK .51 -.63 (13-16) PG 21 .35 - .63 (9-16) DUO21AR-BK DUO29AA-BK .71 - .87 (18-22) PG 29 DUO29AR-BK .51 - .79 (13-20) DUO36AA-BK .87 - 1.10 (22-28) PG 36 DUO36AR-BK .79 - 1.02 (20-26) DUO42AA-BK 1.26 - 1.42 (32-36) PG 42 DUO42AR-BK .98 - 1.22 (25-31) DUO48AA-BK 1.46 - 1.73 (37-44) PG 48 DUO48AR-BK 1.14 - 1.38 (29-35) DUO16MA-BK .20 - .39 (5-10) DUO16MR-BK .12 - .28 (3-7) DUO20MA-BK .24 - .47 (6-12) DUO20MR-BK .20 - .35 (5-9) DUO22MA-BK .39 - .55 (10-14) DUO22MR-BK .28 - .47 (7-12) DUO25MA-BK .51 - .71 (13-18) DUO25MR-BK .35 - .63 (9-16) DUO32MA-BK .71 - .87 (18-22) DUO32MR-BK .51 - .79 (13-20) DUO40MA-BK .87 - 1.10 (22-28) DUO40MR-BK .79 - 1.02 (20-26) DUO50MA-BK 1.26 - 1.42 (32-36) DUO50MR-BK .98 - 1.22 (25-31) DUO63MA-BK 1.46 - 1.73 (37-44) DUO63MR-BK 1.14 - 1.38 (29-35) Dimensions in Inches (mm) TL Thread Length L Body Length D Outer Diameter F1/F Wrench Flat 10 .73 (18.5) .31 (8) 1.57 (40) .91 (23) .87 (22) 12 .80 (20.3) .35 (9) 1.73 (44) .98 (25) .94 (24) 14 .89 (22.5) .39 (10) 1.85 (47) 1.14 (29) 1.06 (27) 17 1.12 (28.4) .43 (11) 1.97 (50) 1.18 (30) 1.30 (33) 23 1.47 (37.3) .43 (11) 2.36 (60) 1.54 (39) 1.65 (42) 29 1.85 (47) .51 (13) 2.72 (69) 1.77 (45) 2.09 (53) 37 2.13 (54.1) .51 (13) 2.91 (74) 2.05 (52) 2.36 (60) 50 2.34 (59.4) .63 (14) 3.11 (79) 2.05 (52) 2.67 (68) M16 x 1.5 10 .63 (16) .31 (8) 1.57 (40) .91 (23) .86 (22) M20 x 1.5 12 .79 (20) .39 (10) 1.73 (44) .98 (25) .94 (24) M20 x 1.5 14 .79 (20) .39 (10) 1.81 (46) 1.14 (29) 1.06 (27) M25 x 1.5 17 .98 (25) .43 (11) 1.97 (50) 1.18 (30) 1.30 (33) M32 x 1.5 23 1.26 (32) .43 (11) 2.36 (60) 1.54 (39) 1.65 (42) M40 x 1.5 29 1.57 (40) .51 (13) 2.72 (69) 1.77 (45) 2.08 (53) M50 x 1.5 37 1.97 (50) .51 (13) 2.91 (74) 2.05 (52) 2.36 (60) M63 x 1.5 50 2.48 (63) .63 (14) 3.11 (79) 2.05 (52) 2.67 (68) 14 .83 (21.1) .51 (13) 1.81 (46) 1.15 (29) 1.06 (27) 17 1.05 (26.7) .63 (14) 1.97 (50) 1.18 (30) 1.30 (33) 23 1.35 (34.3) .75 (19) 2.36 (60) 1.53 (39) 1.65 (42) 29 1.92 (48.7) .79 (20) 2.72 (69) 1.77 (45) 2.08 (53) DUO16NA-BK .39 - .55 (10 - 14) NPT 1/2" DUO16NR-BK .28 - .47 (7 - 12) DUO21NA-BK .51 - .71 (13 - 18) NPT 3/4" DUO21NR-BK .35 - .63 (9 - 16) DUO29NA-BK .71 - .87 (18 - 24) NPT 1" DUO29NR-BK .51 - .79 (13 - 20) DUO36NA-BK .87 - 1.10 (22 - 31) NPT 1-1/2" D F1/F www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 45 Conduit System - Nylon (Polyamide) Standard Series Straight PoleonFit DUO-Ms PoleonFit DUO-Ms: Straight - Nickel Plated Brass Cable Range Conduit Systems -40F to 212F (-40C to 100C) Thread Fits Type & Nominal A Size Conduit Clearance Size Hole DUO11AA-BR .20 - .39 (5-10) PG 11 DUO11AR-BR .12 - .28 (3-7) DUO13AA-BR .24 - .47 (6-12) PG 13/13.5 DUO13AR-BR .20 - .35 (5-9) DUO16AA-BR .39 -.55 (10-14) PG 16 DUO16AR-BR .28 - .47 (7-12) DUO21AA-BR .51 -.63 (13-16) PG 21 DUO21AR-BR .35 - .63 (9-16) DUO29AA-BR .71 - .87 (18-22) PG 29 DUO29AR-BR .51 - .79 (13-20) DUO36AA-BR .87 - 1.10 (22-28) PG 36 DUO36AR-BR .79 - 1.02 (20-26) DUO42AA-BR 1.26 - 1.42 (32-36) PG42 DUO42AR-BR .98 - 1.22 (25-31) DUO48AA-BR 1.46 - 1.73 (37-44) PG 48 DUO48AR-BR 1.14 - 1.38 (13-20) D Outer Diameter F1/F Wrench Flat Also available in NPT and Elongated Threads. IP 54 (Conduit Side) .24 (6) 1.42 (36) .91 (23) 20/20 12 .80 (20.3) .26 (6.5) 1.56 (39.5) .98 (25) 24/22 14 .89 (22.5) .26 (6.5) 1.60 (40.5) 1.14 (29) 28/24 17 1.12 (28.4) .28 (7) 1.75 (44.5) 1.18 (30) 30/30 23 1.47 (37.3) .31 (8) 1.99 (50.5) 1.54 (39) 40/40 29 1.85 (47) .31 (8) 2.22 (56.5) 1.77 (45) 50/50 37 2.13 (54.1) .35 (9) 2.26 (57.5) 2.05 (52) 57/57 50 2.34 (59.4) .39 (10) 2.38 (60.5) 2.05 (52) 64/64 10 .63 (16) .24 (6) 1.42 (36) .91 (23) 20/20 12 .79 (20) .24 (6) 1.56 (39.5) .98 (25) 24/22 14 .79 (20) .24 (6) 1.60 (40.5) 1.14 (29) 28/24 17 .98 (25) .28 (7) 1.75 (44.5) 1.18 (30) 30/30 23 1.26 (32) .31 (8) 1.99 (50.5) 1.54 (39) 40/40 29 1.57 (40) .31 (8) 2.22 (56.5) 1.77 (45) 50/50 37 1.97 (50) .35 (9) 2.26 (57.5) 2.05 (52) 57/57 50 2.48 (63) .39 (10) 2.38 (60.5) 2.05 (52) 64/64 NPT 1/2" 14 .83 (21.1) .51 (13) 1.81 (40.5) 1.14 (29) 28/24 NPT 3/4" 17 1.05 (26.7) .51 (13) 1.97 (44.5) 1.18 (30) 30/30 NPT 1" 23 1.35 (34.3) .63 (19) 2.36 (50.5) 1.54 (39) 40/23 Rotatable IP 68 (10 bar) (Installation Side) Metal style comes with O-Ring. A Suggested Clearance Hole for Non-Threaded mounting +.01" (+.25mm). F1/F D .73 (18.5) Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. 46 L Body Length 10 .20 - .39 (5-10) DUO16MA-BR M16 X 1.5 .12 - .28 (3-7) DUO16MR-BR DUO20MA-BR .39 - .55 (10-14) M20 X 1.5 .28 - .47 (7-12) DUO20MR-BR DUO22MA-BR .39 - .55 (10-14) M20 X 1.5 .28 - .47 (7-12) DUO22MR-BR DUO25MA-BR .51 - .71 (13-18) M25 X 1.5 .35 - .63 (9-16) DUO25MR-BR DUO32MA-BR .71 - .87 (18-22) M32 X 1.5 DUO32MR-BR .51 - .79 (13-20) DUO40MA-BR .87 - 1.22 (22-31) M40 X 1.5 DUO40MR-BR .79 - 1.02 (20-26) DUO50MA-BR 1.26 - 1.42 (32-36) M50 X 1.5 DUO50MR-BR .98 - 1.22 (25-31) DUO63MA-BR 1.46 - 1.73 (37-44) M63 X 1.5 DUO63MR-BR 1.14 - 1.38 (29-35) .39 - .55 (10-14) .28 - .47 (7-12) .51 - .71 (13-18) .35 - .63 (9-16) .71 - .87 (18-24) .51 - .71 (13-20) TL Thread Length +.01" (+.25 mm) Inches (mm) DUO16NA-BR DUO16NR-BR DUO21NA-BR DUO21NR-BR DUO29NA-BR DUO29NR-BR Dimensions in Inches (mm) Thread Size Part Numbers RoHS L TL Dome Fittings also available with the following approvals: For Material Specifications and Approval Information refer to page 52. www.SealconEX.com www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Conduit System - Nylon (Polyamide) Standard Series Bulkhead Fittings - With & Without Thread Bulkhead Conduit Fittings Bulkhead Fitting: Plastic - with Thread Part Numbers Thread Type Male& Size Thread -58F to 248F (-50C to 120C) A PG 11 - 21 Flange 1 Flange Type Female Thread B PG 29 - PG 48 Flange 2 1 1 1 2 2 2 PG11 PG16 PG21 PG29 PG36 PG48 FL-11-BK FL-16-BK FL-21-BL FL-29-BK FL-36-BK FL-48-BK Length Width 1.93 (49) 1.93 (49) 2.72 (69) 3.54 (90) 3.9 (99) 4.57 (116) Flange Type 1: PG 11 - PG 21 1.85 (47) 1.85 (47) 2.56 (65) 3.07 (78) 3.7 (94) 3.98 (101) Height Distance 1.38 (35) 1.38 (35) 1.73 (44) 2.17 (55) 2.6 (66) 2.99 (76) 1.46 (37) 1.46 (37) 2.03 (51.6) 2.54 (64.5) 3.11 (79.5) 3.44 (87.5) E Hole Diameter .17 (37) .17 (37) .24 (51.6) .26 (64.5) .26 (79.5) .26 (87.5) RoHS * Advantages (Threaded): Split system enables pre-assembled cable harnesses to be inserted by means of removable upper part * Easy assembly * High stability * Supplied with gasket for flange connection. * Internal thread for Metric and PG Fittings Flange Type 2: PG 29 - PG 48 H G H G IP 65 Protection Rating Dimensions in Inches (mm) W H G L Conduit Systems * Bulkhead Fittings are manufactured from high-grade Nylon (Polyamide). Flange seal is Buna-N * Split system: large cut-out size allows for quick & easy insertion of pre-assembled cables into a housing * Protection rating: IP 54 / IP 65. * V0 Rated * Combined Conduit and Cable Gland Fittings 2-in-1 * Clamping around entire circumference, ensuring maximum pull-out resistance * No loose parts - Fitting does not have to be dismantled for assembly * High degree of protection E L L W W E Bulkhead Fitting: Plastic - without Thread Part Numbers -58F to 248F (-50C to 120C) Fits Nominal Male Conduit Thread Size A Flange Type Female Thread B IP 54 Protection Rating Dimensions in Inches (mm) L Length W Width H Height G Distance E Hole Diameter DN 12 - DN 23 DN 29 - DN 48 Flange 1 Flange 2 1 1 1 2 2 2 12 17 23 29 37 50 FT-11-BK FT-16-BK FT-21-BK FT-29-BK FT-36-BK FT-48-BK Flange Type 1: Conduit Size 12 - 23 G 1.93 (49) 1.93 (49) 2.72 (69) 3.54 (90) 3.90 (99) 4.57 (116) 1.85 (47) 1.85 (47) 2.56 (65) 3.07 (78) 3.70 (94) 3.98 (101) 1.38 (35) 1.38 (35) 1.73 (44) 2.17 (55) 2.60 (66) 2.99 (76) 1.46 (37) 1.46 (37) 2.03 (51.5) 2.54 (64.5) 3.13 (79.5) 3.44 (87.5) .17 (4.3) .17 (4.3) .24 (6.0) .26 (6.5) .26 (6.5) .26 (6.5) RoHS * Advantages (Without Thread): Split system enables pre-assembled cable harnesses to be inserted by means of removable upper part * Easy assembly * High stability * Supplied with gasket for flange connection. * Conduit remains rotatable Flange Type 2: Conduit Size 29 - 48 G H H E L L W W (Technical Drawings for Bulkhead Fittings with and without Threads) E Note: The design of the Bulkhead Fittings changes depending on size. Up to M25/PG 21 the Fitting has 3 screw holes, from size M32 / PG 29 the Fitting has 4 screw holes (see technical drawings). www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 47 Conduit Systems Conduit System - Superflex Series Superflex & Turn to Seal Fittings The SUPER-FLEX Conduit is made of a special plastic blend. Due to its higher flexibility, it is an ideal solution for drag chain and robotics applications. The Conduit has a UL HB 22.86 LBF/in = Crush Resistance Flammability Rating. Superflex Conduit: Thermoplastic Elastometer - IP 54, IP 65 Part Numbers -58F to 320F (-50C to 160C) Conduit Size Roll Length (feet) Superflex Thermoplastic Elastomer Dimensions Fits Turn-to-Seal Fittings Inner Dia. (A) x Outer Dia. (B) Inches (mm) ST, ET, SM & EM See page 56 for thread specs B A SM-1013-HY SM-1216-HY SM-1721-HY SM-2328-HY SM-2934-HY SM-3642-HY SM-4854-HY *Note: CE Approval applies to SuperFlex Thermoplastic Elastomer and Standard Nominal Conduit Size 8 (SM-0811-BK) 164 164 164 164 82 82 82 10 12 17 23 29 37 50 .39 x .51 (9.9 x 12.9) .48 x .62 (12.2 x 15.7) .65 x .83 (16.6 x 21) .88 x 1.12 (22.4 x 28.4) 1.11 x 1.36 (28.3 x 34.5) 1.40 x 1.67 (35.5 x 42.3) 1.87 x 2.13 (47.5 x 54.2) PG 7, 3/8" NPT, PG 9, M16 PG 11, 3/8" NPT PG 16, 1/2" NPT PG 21, 3/4" NPT, M25 PG 29, 1" NPT, M32 PG 36, 1-1/4" NPT PG 48, 2" NPT Turn-To-Seal Conduit Fittings: Straight & Elbow - Nylon Part Numbers -40F to 230F (-40C to 110C) Thread Fits Type & Nominal Size Conduit Size Elbow - Dimensions in Inches (mm) Straight Fitting - Dimensions in Inches (mm) TL L F F1 Thread Length Body Length Wrench Flat (Body) Wrench Flat (Dome) E TL A Inside Clearance Thread Diameter Length Hole L H F d Elbow Length Elbow Height Wrench Flat (Dome) Inside Diameter Straight Elbow See page 56 for thread specs ST07AA-BK ST07AR-BK ST09AA-BK ST11AA-BK ST16AA-BK ST21AA-BK ST29AA-BK ST36AA-BK ST48AA-BK ET09AA-BK ET11AA-BK ET16AA-BK ET21AA-BK ET29AA-BK - PG 7 PG 7 PG 9 PG 11 PG 16 PG 21 PG 29 PG 36 PG 48 10 8 10 12 17 23 29 37 50 .31 (8) .31 (8) .31 (8) .31 (8) .31 (8) .39 (10) .39 (10) .59 (15) .59 (15) 1.02 (26) 1.02 (26) 1.02 (26) 1.02 (26) 1.02 (26) 1.34 (34) 1.34 (34) 1.73 (44) 1.97 (50) .75 (19) .75 (19) .75 (19) .87 (22) 1.06 (27) 1.50 (38) 1.81 (46) 2.17 (55) 2.55 (65) .87 (22) .87 (22) .87 (22) .94 (24) 1.18 (30) 1.50 (38) 1.81 (46) 2.40 (61) 2.91 (74) .33 (8.5) .33 (8.5) .43 (11) .55 (14) .67 (17) .91 (23) 1.22 (31) 1.57 (40) 2.01 (51) .49 (12.5) .49 (12.5) .60 (15.2) .73 (18.5) .89 (22.5) 1.12 (28.4) 1.47 (37.3) 2.13 (54.1) 2.34 (59.4) .30 (7.5) .31 (8) .39 (10) .43 (11) .47 (12) - 1.77 (45) 2.01 (51) 2.20 (56) 2.64 (67) 3.23 (82) - 1.06 (27) 1.14 (29) 1.38 (35) 1.61 (41) 2.09 (53) - .87 (22) .94 (24) 1.18 (30) 1.50 (38) 1.81 (46) - .37 (9.5) .51 (13) .63 (16) .87 (22) 1.14 (29) - ST11NA-BK ST16NA-BK ST21NA-BK ST29NA-BK ST36NA-BK ET11NA-BK ET16NA-BK ET21NA-BK ET29NA-BK - 3/8" NPT 1/2" NPT 3/4" NPT 1" NPT 1-1/4" NPT 12 17 23 29 37 .55 (14) .51 (13) .55 (14) .75 (19) .71 (18) 1.02 (26) 1.02 (26) 1.22 (31) 1.25 (32) 1.73 (44) .87 (22) 1.06 (27) 1.46 (37) 1.81 (46) 2.40 (61) .94 (24) 1.18 (30) 1.50 (38) 1.81 (46) 2.40 (61) .47 (12) .68 (17.2) .55 (14) .83 (21.1) .75 (19) 1.05 (26.7) 1.02 (26) 1.35 (34.3) 1.38 (35) 1.7 (43.2) .31 (8) .39 (10) .43 (11) .47 (12) - 2.01 (51) 2.20 (56) 2.64 (67) 3.23 (82) - 1.14 (29) 1.38 (35) 1.61 (41) 2.09 (53) - .94 (24) 1.18 (30) 1.50 (38) 1.81 (46) - .51 (13) .63 (16) .83 (21) 1.06 (27) - +.01" (+.25 mm) Straight 2" NPT Also Available ST & ET Fittings are V0 rated & have IP 65 protection without additional parts (O-Ring or Seal Ring). The Turn-to-Seal family consists of Conduit Fittings manufactured from ST - (Straight) Turn-To-Seal Conduit Fittings high-grade polyamide. This design d * Reliable assembly as fitting is supplied pre-assembled. means that the Fittings offer a high No additional parts required protection rating of IP 65 (NEMA 4). * Integrated clamping ring ensures high tear-out strength The Fittings are completely Wrench Wrench * High protection to IP 65 (NEMA 4) without additional parts Flat (F1) pre-assembled and no additional Flat (F) * Can be opened without tools parts such as cap nuts and Suggested Clearance clamping rings need to be fitted, A Hole for Non-Threaded ET - (90 Angled Elbow) Turn-To-Seal ensuring reliability in assembly. Mounting Conduit Fittings The cable protection Conduit can L * Reliable assembly as fitting is supplied pre-assembled. be assembled quickly and easily * No additional parts required by simply inserting the Conduit and * Integrated clamping ring ensures high tear-out strength H turning the cap nut. The Elbow has * High protection to IP 65 without additional parts smooth inside walls, making the * Can be opened without tools Wrench installation of cables & wires easy. TL Flat (F) * Smooth inside walls, therefore easy insertion of the cables V0 Rated! M RoHS into the 90 angle d L 48 TL www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Conduit System - Metal Meleon Series Meleon A & B - MeleonFit & MeleonFit S RoHS F Fit -4F to 176F (-20C to -80C) d Thread Size Part Numbers TL Suggested Clearance Hole for Non-Threaded Mounting A Dimensions in Inches (mm) DN -148F to 572F Size (-100C to -300C) d Inner Diameter D Outer Diameter Roll Length (Ft.) .30 (7.5) .35 (9) .43 (11) .55 (14) .63 (16) .83 (21) 1.02 (26) 1.46 (37) 1.57 (40) 2.01 (51) .41 (10.5) .47 (12) .55 (14) .67 (17) .75 (19) .94 (24) 1.18 (30) 1.61 (41) 1.73 (44) 2.17 (55) 164 164 164 164 164 164 82 82 82 82 7 9 11 14 16 21 26 37 40 51 GS-0811-SA GS-0912-SA GS-1114-SA GS-1417-SA GS-1619-SA GS-2124-SA GS-2630-SA GS-3741-SA GS-4044-SA GS-5155-SA Extreamteures Temper RoHS D d 25 30 30 40 45 55 55 80 80 90 RoHS Suggested Clearance Hole for Non-Threaded Mounting TL Fit S -5F to 158F (-15C to 70C) GS-0812-SB GS-0913-SB GS-1115-SB GS-1418-SB GS-1620-SB GS-2125-SB GS2631-SB GS-3742-SB GS-4045-SB GS-5156-SB DN Size L 7 9 11 14 16 21 26 37 40 51 Dimensions in Inches (mm) d Inner Diameter D Outer Diameter Roll Length (Ft.) .30 (7.5) .35 (9) .43 (11) .55 (14) .63 (16) .83 (21) 1.02 (26) 1.46 (37) 1.57 (40) 2.01 (51) .45 (11.5) .51 (13) .59 (15) .71 (18) .79 (20) .98 (25) 1.22 (31) 1.65 (42) 1.77 (45) 2.20 (56) 164 164 164 164 164 164 82 82 82 82 D d RoHS L F Thread Length Body Length Wrench Flat +.01" (+.25 mm) M12 X 1.5 M16 X 1.5 M16 X 1.5 M20 X 1.5 M20 X 1.5 M25 X 1.5 M32 X 1.5 M40 X 1.5 M50 X 1.5 M63 X 1.5 7 9 11 14 16 21 26 37 40 51 .47 (12) .63 (16) .63 (16) .79 (20) .79 (20) .98 (25) 1.26 (32) 1.57 (40) 1.97 (50) 2.48 (63) .24 (6) .28 (7) .35 (9) .47 (12) .55 (14) .71 (18) .91 (23) 1.32 (33.5) 1.46 (37) 1.81 (46) .31 (8) .31 (8) .39 (10) .39 (10) .39 (10) .39 (10) .47 (12) .55 (14) .55 (14) .55 (14) .94 (24) .94 (24) 1.02 (26) 1.02 (26) 1.02 (26) 1.06 (27) 1.22 (31) 1.42 (36) 1.42 (36) 1.42 (36) .59 (15) .79 (20) .79 (20) .87(22) .87 (22) 1.10 (28) 1.38 (35) 1.77 (45) 2.17 (55) 2.56 (65) MFN1407-BR MFN3809-BR MFN3811-BR MFN1214-BR MFN1216-BR MFN3421-BR MFN1026-BR MFN5437-BR MFN6440-BR MFN2051-BR NPT 1/4" NPT 3/8" NPT 3/8" NPT 1/2" NPT 1/2" NPT 3/4" NPT 1" NPT 1-1/4" NPT 1-1/2" NPT 2" 7 9 11 14 16 21 26 37 40 51 .49 (12.5) .68 (17.2) .68 (17.2) .83 (21.1) .83 (21.1) 1.05 (26.7) 1.35 (34.3) 1.7 (43.2) 1.9 (48.3) 2.4 (61) .24 (6) .28 (7) .35 (9) .47 (12) .55 (14) .71 (18) .91 (23) 1.32 (33.5) 1.46 (37) 1.81 (46) .39 (10) .45 (11.5) .45 (11.5) .51 (13) .51 (13) .59 (15) .59 (15) .63 (16) .71 (18) .79 (20) 1.02 (26) 1.08 (27.5) 1.08 (27.5) 1.14 (29) 1.14 (29) 1.25 (32) 1.34 (34) 1.50 (38) 1.57 (40) 1.65 (42) .59 (15) .79 (20) .79 (20) .87 (22) .87 (22) 1.10 (28) 1.38 (35) 1.77 (45) 2.17 (55) 2.56 (65) MeleonFit S (Swivel): Nickel Plated Brass - IP 54 Part Numbers -4F to 176F (-20C to -80C) Threads Dimensions in Inches (mm) Fits to Thread Type & Meleon d TL L A Female Male DN Size Thread Clearance Thread Body Thread Inner B A Length Diameter Length Hole See page 56 for thread specs Metal Meleon B: Galvanized Steel with PVC Coating - IP 65 Part Numbers TL Inner Diameter MFM1207-BR MFM1609-BR MFM1611-BR MFM2014-BR MFM2016-BR MFM2521-BR MFM3226-BR MFM4037-BR MFM5040-BR MFM6351-BR d A Dimensions in Inches (mm) d *Note: Also available in PG. Thread Size F Threads Thread Fits to Type & Meleon A Male DN Size Thread Clearance A Hole See page 56 for thread specs L Metal Meleon A: Galvanized Steel - IP 40 Part Numbers MeleonFit: Nickel Plated Brass - IP 54 25 30 30 40 45 55 55 80 80 90 F Wrench Flat +.01" (+.25 mm) M12 X 1.5 M16 X 1.5 M16 X 1.5 M20 X 1.5 M20 X 1.5 M25 X 1.5 M32 X 1.5 M40 X 1.5 M50 X 1.5 M63 X 1.5 7 9 11 14 16 21 26 37 40 51 .47 (12) .63 (16) .63 (16) .79 (20) .79 (20) .98 (25) 1.26 (32) 1.57 (40) 1.97 (50) 2.48 (63) .24 (6) .28 (7) .35 (9) .47 (12) .55 (14) .71 (18) .91 (23) 1.32 (33.5) 1.46 (37) 1.81 (46) .31 (8) .31 (8) .39 (10) .39 (10) .39 (10) .39 (10) .47 (12) .55 (14) .55 (14) .55 (14) 1.06 (27) 1.06 (27) 1.14 (29) 1.14 (29) 1.14 (29) 1.22 (31) 1.38 (35) 1.61 (41) 1.61 (41) 1.61 (41) .59 (15) .79 (20) .79 (20) .87(22) .87 (22) 1.10 (28) 1.38 (35) 1.77 (45) 2.17 (55) 2.56 (65) MFSN1407-BR NPT 1/4" MFSN3809-BR NPT 3/8" MFSN3811-BR NPT 3/8" MFSN1214-BR NPT 1/2" MFSN1216-BR NPT 1/2" MFSN3421-BR NPT 3/4" MFSN1026-BR NPT 1" MFSN5437-BR NPT 1-1/4" MFSN6440-BR NPT 1-1/2" MFSN2051-BR NPT 2" 7 9 11 14 16 21 26 37 40 51 .49 (12.5) .68 (17.2) .68 (17.2) .83 (21.1) .83 (21.1) 1.05 (26.7) 1.35 (34.3) 1.7 (43.2) 1.9 (48.3) 2.4 (61) .24 (6) .28 (7) .35 (9) .47 (12) .55 (14) .71 (18) .91 (23) 1.32 (33.5) 1.46 (37) 1.81 (46) .39 (10) .45 (11.5) .45 (11.5) .51 (13) .51 (13) .59 (15) .59 (15) .63 (16) .71 (18) .79 (20) 1.14 (29) 1.20 (30.5) 1.20 (30.5) 1.25 (32) 1.14 (32) 1.42 (36) 1.54 (39) 1.69 (43) 1.77 (45) 1.85 (47) .59 (15) .79 (20) .79 (20) .87 (22) .87 (22) 1.10 (28) 1.38 (35) 1.77 (45) 2.17 (55) 2.56 (65) MFSM1207-BR MFSM1609-BR MFSM1611-BR MFSM2014-BR MFSM2016-BR MFSM2521-BR MFSM3226-BR MFSM4037-BR MFSM5040-BR MFSM6351-BR *Note: Also available in PG. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 49 Conduit Systems The Meleon range of protective cable conduits are particularly resistant to mechanical stresses. The conduit pipes made of galvanized steel are able to withstand high pressure loads. Matching metal fittings complete the range, ensuring, that the system is 100% industrial grade. Conduit System - Metal Meleon Pro Series Meleon Pro A, B, C Metal Meleon Pro A: Galvanized Steel Smooth PVC Coating - IP 65 Part Numbers DN Size d Conduit Systems -4F to 221F (-20C to105C) MP-1016-SPA MP-1218-SPA MP-1621-SPA MP-2127-SPA MP-2733-SPA MP-3542-SPA MP-4048-SPA MP-5160-SPA Dimensions in Inches (mm) 10 12 16 21 27 35 40 51 Roll Length (Ft.) .41 (10.3) .63 (16) .48 (12.3) .71 (18) .61 (15.5) .83 (21) .82 (20.9) 1.04 (26.5) 1.04 (26.5) 1.31 (33.3) 1.38 (35) 1.65 (42) 1.57 (40) 1.90 (48.2) 2.03 (51.5) 2.36 (60) 98 98 98 98 98 49 49 49 DN Size Part Numbers -148F to 572F (-100C to 300C) D Inner Outer Diameter Diameter Metal Meleon Pro B: Galvanized Steel with Braid - IP 40 40 45 65 100 135 175 230 280 9 11 13 16 21 26 35 40 51 MP-0914-SPB MP-1116-SPB MP-1318-SPB MP-1621-SPB MP-2126-SPB MP-2632-SPB MP-3541-SPB MP-4046-SPB MP-5157-SPB Dimensions in Inches (mm) d D Inner Diameter Outer Diameter Roll Length (Ft.) .35 (9) .43 (11) .51 (13) .63 (16) .83 (21) 1.02 (26) 1.38 (35) 1.57 (40) 2.01 (51) .55 (14) .63 (16) .69 (17.5) .83 (21) 1.02 (26) 1.26 (32) 1.61 (41) 1.81 (46) 2.24 (57) 164 164 164 164 164 82 82 82 82 1.18 (30) 1.38 (35) 1.57 (40) 1.77 (45) 2.17 (55) 2.76 (70) 3.15 (80) 3.54 (90) 3.51 (90) RoHS D d RoHS d D e s Extreerm ure t a Temp Metal Meleon Pro C: Galvanized Steel PVC Coating with Braid - IP 65 Part Numbers DN Size 5F to 158F (-15C to 70C) MP-0915-SPC MP-1117-SPC MP-1319-SPC MP-1622-SPC MP-2127-SPC MP-2633-SPC MP-3542-SPC MP-4047-SPC MP-5158-SPC 9 11 13 16 21 26 35 40 51 Dimensions in Inches (mm) d D Inner Diameter Outer Diameter Roll Length (Ft.) .35 (9) .43 (11) .51 (13) .63 (16) .83 (21) 1.02 (26) 1.38 (35) 1.57 (40) 2.01 (51) .55 (14) .63 (16) .69 (17.5) .83 (21) 1.02 (26) 1.26 (32) 1.61 (41) 1.81 (46) 2.24 (57) 164 164 164 164 164 82 82 82 82 1.18 (30) 1.38 (35) 1.57 (40) 1.77 (45) 2.17 (55) 2.76 (70) 3.15 (80) 3.54 (90) 3.54 (90) D d RoHS Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. 50 www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Conduit System - Metal Meleon Pro Series MeleonFit Pro, MeleonFit Pro S, MeleonFit Clip MeleonFit Pro: Nickel Plated Brass - IP 67 F1 F Wrench Flat L +.01" (+.25 mm) MPM1209-BR MPM1611-BR MPM1612-BR MPM2016-BR MPM2521-BR MPM3226-BR MPM4035-BR MPM5040-BR MPM6351-BR M12 X 1.5 M16 X 1.5 M16 X 1.5 M20 X 1.5 M25 X 1.5 M32 X 1.5 M40 X 1.5 M50 X 1.5 M63 X 1.5 -/9/9 10 / 11 / 11 12 / 13 / 13 16 / 16 / 16 21 / 21 / 21 27 / 26 / 26 35 / 35 / 35 40 / 40 / 40 51 / 51 / 51 .65 (16.5) .75 (19) .87 (22) .87 (22) 1.08 (27.5) 1.36 (34.5) 1.71 (43.5) 1.95 (49.5) 2.44 (62) .96 (24.5) 1.15 (29.2) 1.28 (32.6) 1.28 (32.6) 1.53 (38.8) 1.97 (50) 2.36 (60) 2.73 (69.3) 3.35 (85) .39 (10) .39 (10) .45 (11.5) .51 (13) .59 (15) .59 (15) .63 (16) .71 (18) .79 (20) 1.38 (35) 1.38 (35) 1.54 (39) 1.52 (38.7) 1.61 (41) 1.93 (49) 2.01 (51) 2.40 (61) 2.87 (73) .79 (20) .94 (24) 1.06 (27) 1.06 (27) 1.30 (33) 1.70 (43) 2.05 (52) 2.36 (60) 2.91 (74) .87 (22) 1.02 (26) 1.14 (29) 1.14 (29) 1.38 (35) 1.77 (45) 2.13 (54) 2.48 (63) 3.03 (77) MPN1410-BR MPN3812-BR MPN1216-BR MPN3421-BR MPN1026-BR MPN5435-BR MPN6440-BR MPN2051-BR 1/4" NPT 3/8" NPT 1/2" NPT 3/4" NPT 1" NPT 1-1/4" NPT 1-1/2" NPT 2" NPT 10 / 11 / 11 .49 (12.5) .65 (16.5) .75 (19) 12 / 13 / 13 .68 (17.2) .87 (22) 16 / 16 / 16 .83 (21.1) 21 / 21 / 21 1.05 (26.7) 1.08 (27.5) 27 / 26 / 26 1.35 (34.3) 1.36 (34.5) 35 / 35 / 35 1.7 (43.2) 1.71 (43.5) 40 / 40 / 40 1.9 (48.3) 1.95 (49.5) 2.44 (62) 2.4 (61) 51 / 51 / 51 .96 (24.5) 1.15 (29.2) 1.28 (32.6) 1.53 (38.8) 1.97 (50) 2.36 (60) 2.73 (69.3) 3.35 (85) .39 (10) .45 (11.5) .51 (13) .59 (15) .59 (15) .63 (16) .71 (18) .79 (20) 1.38 (35) 1.52 (38.7) 1.61 (41) 1.93 (49) 2.01 (51) 2.40 (61) 2.87 (73) .79 (20) .79 (20) 1.06 (27) 1.30 (33) 1.70 (43) 2.05 (52) 2.36 (60) 2.91 (74) .87 (22) .87 (22) 1.14 (29) 1.38 (35) 1.77 (45) 2.13 (54) 2.48 (63) 3.03 (77) MeleonFit Pro S (Swivel): Nickel Plated Brass - IP 67 Meleon Pro offers a safe protection against heat and cold, intense mechanical loads and abrasion. The conduits pipes are designed as multilayer variants. They are available with PVC-Coating or exterior metal braiding. Fittings of the MeleonFit Pro series provides perfect matching for all Meleon Pro conduits. RoHS Fits to Dimensions in Inches (mm) Thread Threads Meleon Type A d D TL L F1 Female Pro &Male Size Thread Thread Clearance Inner Outer Thread Body Wrench A/B/C A B Hole Diameter Diameter Length Length Flat Fit Pro S F1 F Wrench Flat F TL Thread Type -4F to 176F (-20C to -80C) Suggested Clearance Hole for Non-Threaded Mounting d Part Numbers A D *Note: Also available in PG. .47 (12) .63 (16) .63 (16) .79 (20) .98 (25) 1.26 (32) 1.57 (40) 1.97 (50) 2.48 (63) TL +.01" (+.25 mm) L MPSM1209-BR MPSM1611-BR MPSM1612-BR MPSM2016-BR MPSM2521-BR MPSM3226-BR MPSM4035-BR MPSM5040-BR MPSM6351-BR M12 X 1.5 M16 X 1.5 M16 X 1.5 M20 X 1.5 M25 X 1.5 M32 X 1.5 M40 X 1.5 M50 X 1.5 M63 X 1.5 -/9/9 10 / 11 / 11 12 / 13 / 13 16 / 16 / 16 21 / 21 / 21 27 / 26 / 26 35 / 35 / 35 40 / 40 / 40 51 / 51 / 51 .65 (16.5) .75 (19) .87 (22) .87 (22) 1.08 (27.5) 1.36 (34.5) 1.71 (43.5) 1.95 (49.5) 2.44 (62) .96 (24.5) 1.15 (29.2) 1.28 (32.6) 1.28 (32.6) 1.53 (38.8) 1.97 (50) 2.36 (60) 2.73 (69.3) 3.35 (85) .39 (10) .39 (10) .45 (11.5) .51 (13) .59 (15) .59 (15) .63 (16) .71 (18) .79 (20) 1.34 (34) 1.38 (35) 1.46 (37) 1.61 (41) 1.73 (44) 2.01 (51) 2.13 (54) 2.52 (64) 2.99 (76) .79 (20) .79 (20) .94 (24) 1.06 (27) 1.30 (33) 1.70 (43) 2.06 (52) 2.36 (60) 2.91 (74) .87 (22) .87 (22) 1.02 (26) 1.14 (29) 1.38 (35) 1.77 (45) 2.13 (54) 2.48 (63) 3.03 (77) MPSN1410-BR 1/4" NPT 10 / 11 / 11 .49 (12.5) .65 (16.5) .75 (19) MPSN3812-BR 3/8" NPT 12 / 13 / 13 .68 (17.2) .87 (22) MPSN1216-BR 1/2" NPT 16 / 16 / 16 .83 (21.1) MPSN3421-BR 3/4" NPT 21 / 21 / 21 1.05 (26.7) 1.08 (27.5) 27 / 26 / 26 1.35 (34.3) 1.36 (34.5) 1" NPT MPSN1026-BR MPSN5435-BR 1-1/4" NPT 35 / 35 / 35 1.7 (43.2) 1.71 (43.5) MPSN6440-BR 1-1/2" NPT 40 / 40 / 40 1.9 (48.3) 1.95 (49.5) 2.44 (62) 2" NPT MPSN2051-BR 51 / 51 / 51 2.4 (61) .96 (24.5) 1.15 (29.2) 1.28 (32.6) 1.53 (38.8) 1.97 (50) 2.36 (60) 2.73 (69.3) 3.35 (85) .39 (10) .45 (11.5) .51 (13) .59 (15) .59 (15) .63 (16) .71 (18) .79 (20) 1.38 (35) 1.46 (37) 1.61 (41) 1.73 (44) 2.01 (51) 2.13 (54) 2.52 (64) 2.99 (76) .79 (20) .79 (20) 1.06 (27) 1.30 (33) 1.70 (43) 2.05 (52) 2.36 (60) 2.91 (74) .87 (22) .87 (22) 1.14 (29) 1.38 (35) 1.77 (45) 2.13 (54) 2.48 (63) 3.03 (77) *Note: Also available in PG. Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. .47 (12) .63 (16) .63 (16) .79 (20) .98 (25) 1.26 (32) 1.57 (40) 1.97 (50) 2.48 (63) A Suggested Clearance Hole for Non-Threaded Mounting RoHS MeleonFit Clip: Metal Part Numbers Fits to Fits to Fits to Size Meleon Meleon Meleon DN Pro A Pro B,C MFC07 MFC09 MFC11 MFC14 MFC16 MFC21 MFC27 MFC35 MFC51 7 9 11 11 16 21 35 51 16 21 27 35 - www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 16 21 26 35 - 7 9 11 14 16 21 26/27 35 51 51 Conduit Systems F1 Wrench Flat F Thread Type -4F to 176F (-20C to -80C) Threads Thread Fits to Dimensions in Inches (mm) Type Meleon d D L A TL Female &Male Size Pro Thread Thread Inner Outer Thread Body A / B / C Clearance A B Diameter Diameter Length Length Hole Fit Pro D d Part Numbers RoHS Technical Information Specifications: Material, Temperature & Color Nylon PVDF Pressure Rating: 150 PSIG (10 BAR) NEMA 4x, 6 (Submersible) & 12 - IP 68 / IP 69K Pressure Rating: 150 PSIG (10 BAR) NEMA 4x, 6 (Submersible) & 12 - IP 68 / IP 69K Materials: Resistant to: * Acid * Fittings: PVDF * Salt solution (Polyvinylidene Flouride) * Oxydant * V0 Rated - Flame resistant, * Halogens Halogen * Alcohols & Phosphorous Free, * Chlorinated solvent Self-extinguishing, * Aliphatic hydrocarbons Non-toxic, Fungus resistant * Petrol * Form Seal: FKM * Clamping Insert: PVDF * Optional O-Ring: FKM Operating Temperature: -31F to 302F (-35C to 150C) Stainless Steel Technical Information Materials: Fittings: Nylon 6/6 * V0 Rated - Flame resistant, Halogen and Phosphorous Free, Self-extinguishing, Non-toxic, Fungus resistant * Form Seal: Buna-N * Clamping Insert: Nylon * Optional O-Ring: Buna-N, FKM or Silicone * Optional Seal Ring: Polyethylene or Fiber-Reinforced Plastic Operating Temperature: Nylon Fittings: -40F to 212F (-40C to 100C) Nylon Fitting w/ Aluminum Clamp: -4F to 158F (-20C to 70C) All Black Nylon Fittings use Available Colors: the new UL f1 (746C) material. * Black (RAL 9005) These products are ideally used * Gray (RAL 7035) in Photovoltaic / Solar / Outdoor * Blue (RAL 5012) applications requiring more (upon request) (UV / Ozone Stable) material. Nickel Plated Brass Pressure Rating: 150 PSIG (10 BAR) NEMA 4x, 6 (Submersible) & 12 - IP 68 / IP 69K Materials: * Fittings: Nickel Plated Brass * Spring (Flex Extension): 304 Stainless Steel * Form Seal: Buna-N (NBR) or FKM * Clamping Insert: PA (Nylon) or PVDF * O-Ring: Buna-N (NBR) FKM or Silicone optional * Optional Seal Ring: Polyethylene or Fiber-Reinforced Plastic Operating Temperature: Buna-N: -40F to 212F (-40C to 100C) PVDF: -31F to 302F (-35C to 150C) EMI Feed-Through Clamping Insert: Metal Coated Nylon Nylon Splines 6/6: V0 rated - Flame resistant, halogen and phosphorous free, self extinguishing, non-toxic, fungus resistant Nickel Plated Brass - WADI Type Operating Temperatures * Mini WADI (Buna-N TPE) * Mini WADI (FKM) * WADI XL (Buna-N) -4F to 212F (-20C to 100C) -13F to 392F (-25C to 200C) -4F to 212F (-20C to 100C) Metric: -40F to 212F (-40C to 100C) Adapter, Reducer & Enlarger Materials Materials Operating Temperatures Pressure Rating: 150 PSIG (10 BAR) NEMA 4x, 6 (Submersible) & 12 - IP 68 / IP 69K Materials: * Fittings: (INOX) 303 Stainless Steel or 316L Stainless Steel * Form Seal: Buna-N (NBR) or FKM * Clamping Insert: PA (Nylon) or PVDF * O-Ring: Buna-N, FKM or Silicone Operating Temperature: Buna-N: -40F to 212F (-40C to 100C) PVDF: -31F to 302F (-35C to 150C) Insert Materials Materials * * * * Operating Temperatures Buna-N / TPE -40F to 212F (-20C to 100C) Elastomer -40F to 212F (-40C to 100C) FKM -40F to 392F (-40C to 200C) Silicone (VMQ) -76F to 482F (-60C to 250C) O-Ring & Seal Ring Materials Materials Operating Temperatures * Buna-N (NBR) * FKM * Silicone (VMQ) -22F to 248F (-30C to 120C) -40F to 392F (-40C to 200C) -76F to 482F (-60C to 250C) * Polyethylene * Fiber-reinforced Plastic -22F to 158F (-30C to 70C) -40F to 572F (-40C to 300C) * RoHS ULf1 (746C) All Black Nylon (Dome & Flex) Strain Relief Fittings, Cord Grips, Cable Glands are now made with UV / Ozone Stable material. UL/UR* CSA VDE CAGE PATENT E103997 074032 71339 O UE11 4145075 * The following Nylon and Nickel Plated Brass Strain Relief Fittings are UR, but not UL listed: Sizes 3/8" NPT, M12, M16, PG7, PG9, PG11 and Multi-Hole fittings. The following Multi-Hole sizes are neither UL or UR rated: -4F to 203F (-20C to 95C) Sizes 1/2" NPT-E, M16-E, M20-E, M40, M50, M63 * The following Nylon and Nickel Plated Brass Strain Relief Fittings are UR, but not UL listed: * Sizes 3/8" NPT, M12, M16, PG7, PG9, and PG11 Dome Fittings also available V0 Flammability Rating according to with the following approvals: * Nylon/Polypropylene * Nickel Plated Brass w/ Buna-N O-Ring * 303/316L Stainless Steel w/ Buna-N O-Ring -4F to 176F (-20C to 80C) -40F to 212F (-40C to 100C) UL 94 (Applies to all Strain Relief Fittings and Locknuts) Halogen, Pospherous Free / Non-Toxic 52 www.SealconEX.com Call for Technical Assistance: (800) 456-9012 / (303) 699-1135 www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Technical Information NEMA Ratings: Description & Class NEMA stands for the National Electrical Manufacturers Association. It has established a range of standards for electrical equipment enclosures. NEMA Rating NEMA 1 NEMA 2 NEMA 3 NEMA 3R NEMA 3S NEMA 4 NEMA 4x NEMA 6 NEMA 6P NEMA 12, 12K NEMA 13 IP 23 IP 30 IP 64 IP 32 IP 64 IP 66 IP 66 IP 66-68 IP 67-68 IP 65 IP 65 - - - - - - - Outdoor - - - - - - - - Indoor & Outdoor - - - - IP Class Indoor - - - www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Technical Information NEMA 1 General Purpose - Indoors Type 1 - intended for general purpose indoor use primarily to provide a degree of protection against contact with the enclosed equipment or locations where unusual service conditions do not exist. NEMA 2 Drip Proof - Indoors Type 2 - intended for general purpose indoor use primarily to provide a degree of protection against limited amounts of falling water and dirt. NEMA 3 Dust Tight, Rain Tight, & Ice/Sleet resistant - Indoors/Outdoors Type 3 - intended for general purpose outdoor use primarily to provide a degree of protection against windblown dust, rain, and sleet; and to be undamaged by the formation of ice on the enclosure. NEMA 3R Rain Proof & Ice/Sleet Proof - Indoors/Outdoors Type 3R - intended for general purpose outdoor use primarily to provide a degree of protection against falling rain; and to be undamaged by the formation of ice on the enclosure. NEMA 3S Dust Tight, Rain Tight, & Ice/Sleet Proof - Outdoors Type 3S - intended for general purpose outdoor use primarily to provide a degree of protection against sleet; and to be undamaged by the formation of ice on the enclosure. NEMA 4 Water Tight & Dust Tight - Indoors/Outdoors Type 4 - intended for general purpose indoor or outdoor use primarily to provide a degree of protection against windblown dust and rain, splashing water, and hose directed water; and to be undamaged by the formation of ice on the enclosure. NEMA 4x Water Tight, Dust Tight, & Corrosion Resistant - Indoors/Outdoors Type 4X - intended for general purpose indoor and outdoor use primarily to provide a degree of protection against corrosion, windblown dust and rain, splashing water, and hose-directed water; and to be undamaged by the formation of ice on the enclosure. NEMA 5 Superseded by NEMA 12 for Control Apparatus Type 5 - see NEMA 12 NEMA 6 Submersible, Water Tight, Dust Tight, & Ice/Sleet Resistant - Indoors/Outdoors Type 6 - intended for general purpose indoor or outdoor use primarily to provide a degree of protection against the entry of water during temporary submersion at a limited depth; and to be undamaged by the formation of ice on the enclosure. NEMA 6P Submersible, Water Tight, Dust Tight, & Ice/Sleet Resistant - Indoors/Outdoors Type 6P - Same as NEMA 6 including protection against the entry of water during prolonged submersion at a limited depth. NEMA 7 Underwriters Lab Class 1-Groups C&D -Explosion Proof - Indoors Type 7 - for indoor use in locations classified as Class I, Groups A, B, C, or D, as defined in the National Electrical Code. Type 7 enclosures shall be capable of withstanding the pressures resulting from an internal explosion of specified gases, and contain such an explosion sufficiently that an explosive gas-air mixture existing in the atmosphere surrounding the enclosure will not be ignited. Enclosed heat generating devices shall not cause external surfaces to reach temperatures capable of igniting explosive gas-air mixtures in the surrounding atmosphere. Enclosures shall meet explosion, hydro-static, and temperature design tests. NEMA 8 Underwriters Lab Class 1-Groups C&D -Explosion Proof - Indoors Type 8 is same as NEMA 7, except the unit is oil-immersed NEMA 9 Underwriters' Lab Class II - Groups E, F, G - Indoors Type 9 - intended for special purpose indoor use in locations classified as hazardous (Class II, Groups E, F, or G, as defined in the National Electrical Code). Type 9 enclosures shall be capable of preventing the entrance of dust. Enclosed heat generating devices shall not cause external surfaces to reach temperatures capable of igniting or discoloring dust on the enclosure or igniting dust-air mixtures in the surrounding atmosphere. Enclosures shall meet dust penetration and temperature design tests, and aging of gaskets (if used). NEMA 10 Bureau of Mines NEMA 11 Corrosion Resistant & Drip Proof - Oil Immersed - Indoors NEMA 12 Industrial Use - Dust Tight & Drip Tight - Indoors Type 12 - intended for industrial indoor use primarily to provide a degree of protection against dust, falling dirt, and dripping noncorrosive liquids. NEMA 13 Oil Tight & Dust Tight - Indoors Type 13 - intended for industrial indoor use primarily to provide a degree of protection against dust, spraying of water, oil, and noncorrosive coolant. 53 Technical Information IP Ratings: Descriptions The IP Code defined in international standard IEC 60529 classifies the degrees of protection provided against the intrusion of: Technical Information * * * * Solid objects (including body parts like hands and fingers) Dust Accidental contact Water in electrical enclosures It consists of the letters IP (for "International Protection Rating" or "Ingress Protection Rating") followed by two digits and an optional letter. The standard aims to provide users more detailed information than vague marketing terms such as "waterproof". Level Object size protected against Effective against 0 - No protection against contact and ingress of objects 1 >50 mm Any large surface of the body, such as the back of a hand, but no protection against deliberate contact with a body part 2 >12.5 mm Fingers or similar objects 3 >2.5 mm Tools, thick wires, etc. 4 >1 mm Most wires, screws, etc. 5 dust protected Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment; complete protection against contact 6 dust tight No ingress of dust; complete protection against contact Protected against Details 0 not protected - 1 dripping water Dripping water (vertically falling drops) shall have no harmful effect. 2 dripping water when tilted up to 15 Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15 from its normal position. 3 spraying water Water falling as a spray at any angle up to 60 from the vertical shall have no harmful effect. 4 splashing water Water splashing against the enclosure from any direction shall have no harmful effect. 5 water jets Water projected by a nozzle against enclosure from any direction shall have no harmful effects. 6 powerful water jets Water projected in powerful jets against the enclosure from any direction shall have no harmful effects. 7 immersion up to 1 m Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1 m of submersion). 8 immersion beyond 1 m The equipment is suitable for continuous immersion in water under conditions which shall be specified by the manufacturer. NOTE: Normally, this will mean that the equipment is hermetically sealed. However, with certain types of equipment, it can mean that water can enter but only in such a manner that produces no harmful effects. Level IP 69K German standard DIN 40050-9 extends the IEC 60529 rating system described above with an IP 69K rating for high-pressure, high-temperature wash-down applications. Such enclosures must not only be dust tight (IP 6X), but also able to withstand high-pressure and steam cleaning. The test specifies a spray nozzle that is fed with 80C (176F) water at 8-10 MPa (80-100 bar) and a flow rate of 14-16 L/min. The nozzle is held 10-15 cm (3.94" - 5.91") from the tested device at angles of 0, 30, 60 and 90 for 30 seconds each. The test device sits on a turntable that rotates once every 12 s (5 rpm). The IP 69K test specification was initially developed for road vehicles, especially those that need regular intensive cleaning (dump trucks, cement mixers, etc), but also finds use in other areas (e.g., food industry, railroad, marine, etc.) The most commonly used protection methods are IP and NEMA, whereas: * IP Classification - addresses the European market * NEMA Classification - addresses the North American market For questions please call our Inside Technical Sales Department at 1(800)-456-9012 or (303)-699-1135 54 www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Technical Information Specifications: Torque & Thread Diameter Major Thread Minor Thread Diameter Diameter Metric 6.0 mm / .24" 8.0 mm / .31" 10.0 mm / .40" 12.0 mm / .47" M16 x 1.5 16.0 mm / .63" 14.5 mm / .57" 20.0 mm / .79" 18.5 mm / .72" M20 x 1.5 E M25 x 1.5 25.0 mm / .98" 23.5 mm / .92" M32 x 1.5 32.0 mm / 1.26" 30.5 mm / 1.20" M40 x 1.5 40.0 mm / 1.57" 38.5 mm / 1.51" M50 x 1.5 50.0 mm / 1.97" 48.5 mm / 1.90" 63.0 mm / 2.48" NPT Major Thread Minor Thread Diameter Diameter 5.0 mm / .19" 6.8 mm / .26" 8.4 mm / .33" 8.0 mm / .32" M16 X 1.5 E M20 x 1.5 M63 x 1.5 Major Thread Minor Thread Diameter Diameter 61.5 mm / 2.42" 1/4" 3/8" 12.5 mm / .49" 16.8 mm / .66" 11.6 mm / .46" 15.2 mm / .60" 19.1 mm / .75" 21.2 mm / .83" 1/2" 1/2"-E 20.8 mm / .82" 20.8 mm / .82" 18.8 mm / .74" 18.8 mm / .74" 28.3 mm / 1.11" 26.8 mm / 1.05" 3/4" 26.2 mm / 1.03" 24.1 mm / .95" PG29 37.0 mm / 1.46" 35.5 mm / 1.46" 1" 1-1/4" 32.8 mm / 1.29" 41.4 mm / 1.63" 30.5 mm / 1.20" 38.1 mm / 1.50" PG 36 47.0 mm / 1.85" 45.5 mm / 1.79" 1-1/2" 47.8 mm / 1.88" 45.7 mm / 1.80" PG 42 PG 48 54.0 mm / 2.13" 59.3 mm / 2.33" 52.5 mm / 2.13" 57.8 mm / 2.72" PG 7 PG 9 12.5 mm / .49" 15.2 mm / .60" 11.3 mm / .49" 13.9 mm / .54" PG 11 18.6 mm / .73" 17.3 mm / .68" PG 13 PG 16 20.4 mm / .89" 22.5 mm / .89" PG 21 Dome Opening 3.0 mm / .11" 5.0 mm / .19" 6.0 mm / .24" 6.5 mm / .26" 6.5 mm / .26" 8.0 mm / .31" 8.0 mm / .31" 10.0 mm / .39" 12.0 mm / .47" 12.0 mm / .47" 14.0 mm / .55" 18.0 mm / .71" 18.0 mm / .71 25.0 mm / .98" 25.0 mm / .98" 25.0 mm / .98" 32.0 mm / 1.26" 32.0 mm / 1.26" 38.0 mm / 1.50" 38.0 mm / 1.50" 44.0 mm / 1.73" 44.0 mm / 1.73" Technical Information M6 x 1.0 M8 x 1.25 M10 x 1.5 M12 x 1.5 PG Determine Sizes & Type of Fitting: 1. Check markings on the hex portion (wrenching flats). PG, NPT or Metric size should be embedded. This only applies to Nylon parts. 2. Measure major thread diameter and compare with chart above. This may tell you whether it is a PG, NPT or Metric thread (Nylon or Brass) 3. Confirm grommet type inside fitting. (See table on right for grommet identification) 4. The shorter length fittings are CD's (connector dome), the longer type are CF's (connector flex). 5. We offer Enlarged as well as Reduced solutions. A PG13.5/16 has a PG13 thread with a PG16 body. Reduced would be the opposite (only in Nylon) 6. The shading (grouping) indicates same size bodies, but different threads. Note: Dome Opening = the largest possible dimension diameter for one or more cables. Grommet Identification Color Type of Grommet Black Gray Beige Green Red Blue Standard Reduced Multi-Hole / Solid Plug FKM Silicone RG / FP Hygienic Glands Recommended Torque Specifications for Strain Relief Fittings Torque in in-lb - Inch-Pound (Nm - Newton Meters) Sizes M6 M8 PG7, M12X1.5 PG 9, PG 11, PG 13, 3/8" NPT, 1/2" NPT, M16X1.5, M20X1.5 PG 16, 1/2" NPT-E PG21, PG29, PG36, PG42, PG48, 3/4" NPT, 1" NPT 1-1/4" NPT, 1-1/2" NPT, M25, M32, M40, M50, M63 Plastic Fittings Thread & Lock Nuts Dome Nuts Metal Fittings Dome Nuts Thread & Lock Nuts 14.4 (1.62) 22.1 (2.5) 29.5 (3.33) 22.1 (2.5) 33.2 (3.75) 44.2 (5) 17.7 (2) 17.7 - 26.6 (2-3) 36.9 (4.17) 36.9 (4.17) 44.2 (5) 44.2 (5) 66.4 (7.5) 59 (6.67) 17.7 (2) 17.7 - 26.6 (2-3) 55.3 (6.25) 55.3 (6.25) 66.4 (7.5) 88.5 (10) Note: Torque for dome nuts was determined using a metal rod. It may vary for cable, depending on the crush resistance of the cable. We recommend to determine the actual torque empirically, testing the actual cable used. The values shown above are for reference only. Torque Specification is based on Norm: EN 50262 The Pull-Test Rating of our Strain Relief Fittings complies with Industry Standards. Pull-Test Rating: 35 lb.* For questions please call our Inside Technical Sales Department at 1(800)-456-9012 or (303)-699-1135. *Pull-Test Rating varies by Multi-Hole. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 55 Technical Information Thread Specifications & Pitch: NPT, Metric & PG NPT Threads Technical Information Thread Size Major Dia. in Inches (mm) Pitch in Inches (mm) Threads per Inch 60 1/4" NPT .54 (13.72) .056 (1.41) 18 Pitch conicity: 6.25% 3/8" NPT .675 (17.145) .056 (1.411) 18 1/2" NPT .84 (21.336) .071 (1.814) 14 3/4" NPT 1.05 (26.67) .071 (1.814) 14 1" NPT 1-1/4" NPT 1-1/2" NPT 2" NPT 1.314 (33.40) 1.66 (42.164) 1.90 (48.26) 2.375 (60.325) .087 (2.208) .087 (2.208) .087 (2.208) .087 (2.208) 11.5 11.5 11.5 11.5 * NPT Thread = National Pipe Thread * Taper rate for all NPT threads is 1/16 * The taper on NPT threads allows them to form a seal when torqued as the flanks of the threads compress against each other, as opposed to straight thread fittings 90 Metric Threads Thread Size Major Dia. in Inches (mm) Pitch in Inches (mm) Thru Hole in Inches (mm) 60 M6 M8 M10 M12 M16 M20 M25 M32 M40 M50 M63 .24 (6) .31 (8) .39 (10) .47 (12) .63 (16) .79 (20) .98 (25) 1.26 (32) 1.57 (40) 1.97 (50) 2.48 (63) .04 (1) .05 (1.25) .06 (1.5) .059 (1.5) .059 (1.5) .059 (1.5) .059 (1.5) .059 (1.5) .059 (1.5) .059 (1.5) .059 (1.5) .251 (6.4) .33 (8.4) .413 (10.5) .492 (12.5) .63 (16) .79 (20) .98 (25) 1.26 (32) 1.57 (40) 1.97 (50) 2.48 (63) Pitch * World-wide most commonly used type thread * Characterized by its major diameter and its pitch * Designated by the letter M followed by the value of the nominal diameter and the pitch, both expressed in millimeters and separated by the multiplication sign `x' (i.e. M12 x 1.5) PG Threads Thread Size Major Dia. in Inches (mm) Pitch in Inches (mm) Thru Hole in Inches (mm) 80 NPT Threads 56 PG 7 PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48 .49 (12.5) .60 (15.2) .73 (18.6) .80 (20.4) .89 (22.5) 1.11 (28.3) 1.46 (37) 1.85 (47) 2.13 (54) 2.39 (59.3) .05 (1.27) .056 (1.41) .056 (1.41) .056 (1.41) .056 (1.41) .062 (1.59) .062 (1.59) .062 (1.59) .062 (1.59) .062 (1.59) .50 (12.7) .606 (15.4) .74 (18.8) .8149 (20.7) .897 (22.8) 1.12 (28.6) 1.47 (37.4) 1.87 (47.5) 2.14 (54.5) 2.35 (59.8) Pitch * * * * PG Thread = Panzer-Gewinde (also Panzer-Rohr-Gewinde) German thread type Depth of thread smaller than NPT or Metric, but larger flank angle Straight thread Metric Threads PG Threads www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Other Products Circular Connectors (M8-M40) Other Products / Index M8 ! 0 4 -M r Powe werful 2 1 M & Po ct ompa C Circular Connector Options for every application! The Industrial Ethernet is becoming increasingly important in the world of automation technology. In this era of industry 4.0 or IIOT (Industrial Ethernet of Things), everything is about the reliability and speed of data transmission. However, to ensure the performance reaches the end device to its full extent, choosing the right connection is a decisive factor. There are a variety of connector sizes and types which offer users a wide range of options: from classic solutions with signal and power plugs through to an innovative hybrid connection. The most typical choice is the 2 connector (signal + power) solution. There is a clear physical separation between data and power supply and the complexity of the wiring is fairly comprehensible. Separated shells and separated shields - if there is adaquate space; everything is fine. However, the trend is for single cable solutions. This is despite `hybrid' solutions opening up new potential for cost reduction since two cables and connectors become one. Installation expenses are reduced on site and space requirements are lessened. Summary: numerous connector series feature physical properties which allow end devices to be controlled using a fast Ethernet connection while simultaneously being supplied with power. In the target market, both performance data and the application itself should always be able to be assessed. The environment for the end application and how the user interacts with the plug system are important factors that often take precedence over purely technical aspects. 2-Plug Solutions M23 Power RJ45 Our M23RJ45 connector system features suitable RJ45 patch cables which are housed in a sturdy nickel plated or optional stainless steel housing. The shielded patch cables are pre-assembled according to the requirements (e.g. Cat5 or Cat 5e) and integrated into the M23 connector. When physical performance is key, the classic M23 round connector is put into action. With 6, 8, or 9-pole inserts and performance data of 28A/630V, it is capable of covering the majority of applications. 1-Plug Solutions M12 Power M23 PoE The M12 series has already established itself over the past few years for data transmission via fast Ethernet using so-called `D-coding'. The 4-pole connector supplies bandwidths of up to 100 MHz (Cat5e). Our M12 power connector is a new addition to this model size, which is capable of transmitting power up to 16 A / 630 V despite being extremely miniaturized using new materials and contact systems. It is EMI capable thanks to the 360 shield feature. Available as K, L, S, and T coding. The M23 PoE connection system comes with the capability to have power and ethernet all in one shell. This connector is robust, safe, compact and is ideal for rough industrial environments. Data packages can be transmitted at up to 10 Gigabytes. With five separate shieldings, cross talking is virtualy eliminated. Flame resistant, reliable crimp and solder contacts and vibration safe make this connecter the solution to many applications. M23 Hybrid The new M23 hybrid (4+4+4) by HUMMEL is the compact all-inone solution for the transmission of power, industrial Ethernet (IE) and signals. The plug-connector series unites the separate, shielded data transmission on 4 contacts according to CAT.5e with a high processing power on 4 additional power contacts (up to 28A and 630V). Data transmission rates of up to 500 MBit/s are possible without any problems. In addition 4 other contacts are available for signal transmission. The assembly time is minimal, the Ethernet element is simply snapped into place. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 57 Other Products M12 Power Circular Connector - Jaeger Other Products / Index M12 Power Circular Connector - Compact & Powerful! Features Applications * 16 Amp & 630 Volt * -40F - 257F (-40C to 125C) * IP 67 & IP 69K * EMI Ready * V0 Rated Inserts * K, L, S, T, Coding * Robust & Compact * Over Mold in Black & Blue * Field Attachable * Nickel Plated & Stainless Steel Options * Small Motors * Encoders * Lighting * Heating * Small Welding * Instrumentation * Material Handling * Medical Equipment * Scanning * Industrial Fans NEW Benefits * Meets demand for more power with smaller footprint (space saving) * Liquid & Spray Tight * Shielded (EMI) for data applications * Recessed Contacts (less bending) * Self Aligns (Sturdy) * Field Wireable ucing d o r Int by Jaeger Connecteurs offers families of circular connectors adapted to usage in a rough industrial environment: Requiring a greater or lesser degree of tightness; compactness and multiplexing; carrying current of varying strength, weight, cost and more. 58 www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Other Products Ex /EXIOS - Stainless Steel (INOX) 303 & 316L EXIOS +A2F Raw Brass, Cable Glands, for Non-Armored Hazardous Duty Locations, Nylon 6 Clamping Insert, Silicone O-Ring & Seals, Protection Class V2, UL 94, IP 66/67/68, 5 Bar Part Numbers A Clearance Hole See page 56 for thread specs YA09NK-BB YA13NK-BB YA13NM-BB YA21NK-BB YA29NK-BB YA29LK-BB YA36NK-BB YA50NK-BB YA52NK-BB YA30NK-BB 20 - 1 20 - 1 20 - 2N 20 - 3 25 32 40 50 63 75 YA16MK-BB YA20MK-BB YA20MM-BB YA25MK-BB YA32MK-BB YA40MK-BB YA50MK-BB YA63MK-BB YA75MK-BB YA90MK-BB 20 - 1 20 - 1 20 - 2 20 - 3 25 32 40 50 63 75 Dimensions in Inches (mm) 3/8" NPT* 1/2" NPT* 1/2" NPT* 3/4" NPT* 1" NPT* 1 1/4" NPT* 1 1/2" NPT* 2" NPT* 2 1/2" NPT* 3" NPT* Inches (mm) TL Thread Length *All EXIOS in NPT do not come with an O-Ring D Diameter 1.40 (35.6) 1.40 (35.6) 1.44 (36.5) 1.87 (47.5) 1.88 (47.8) 2.01 (51.1) 2.24 (56.8) 2.57 (65.4) 2.77 (70.3) 3.00 (76.2) 1.06 (27) 1.14 (29) 1.06 (27) 1.38 (35) 1.65 (42) 2.05 (52) 2.52 (64) 2.87 (73) 3.54 (90) 4.21 (107) .87 (22) .87 (22) .94 (24) 1.18 (30) 1.42 (36) 1.81 (46) 2.17 (55) 2.56 (65) 3.15 (80) 3.74 (95) 1.40 (35.6) 1.40 (35.6) 1.56 (39.7) 1.87 (47.5) 1.88 (47.8) 2.01 (51.1) 2.24 (56.8) 2.57 (65.4) 2.77 (70.3) 3.00 (76.2) 1.06 (27) 1.06 (27) 1.14 (29) 1.38 (35) 1.65 (42) 2.05 (52) 2.52 (64) 2.87 (73) 3.54 (90) 4.21 (107) .87 (22) .87 (22) .94 (24) 1.18 (30) 1.42 (36) 1.81 (46) 2.17 (55) 2.56 (65) 3.15 (80) 3.74 (95) Wrench Flat +.01" (+.25 mm) 24 - .47 (6 - 12) .63 (16) .68 (17.2) 24 - .47 (6 - 12) .79 (20) .83 (21.1) .35 - .63 (9 - 16) .79 (20) .83 (21.1) .49 - .81 (12.5 - 20.5) 1.05 (26.7) .81 (20.5) .67 - 1.02 (16.9 - 26) 1.35 (34.3) .98 (25) .87 - 1.30 (22 - 33) 1.65 (41.9) 1.02 (26) 1.10 - 1.61 (28 - 41) 1.92 (48.7) 1.04 (26.5) 1.57 - 2.07 (40 - 52.6) 2.375 (60.4) 1.06 (27) 2.01 - 2.40 (51 - 61) 2.875 (74.1) 1.57 (40) 2.44 - 3.07 (62 - 78) 3.50 (88.9) 1.63 (41.5) M16 x 1.5 24 - .47 (6 - 12) M20 x 1.5 24 - .47 (6 - 12) M20 x 1.5 .35 - .63 (9 - 16) M25 x 1.5 .49 - .81 (12.5 - 20.5) M32 x 1.5 .67 - 1.02 (16.9 - 26) M40 x 1.5 .87 - 1.30 (22 - 33) M50 x 1.5 1.10 - 1.61 (28 - 41) M63 x 1.5 1.57 - 2.07 (40 - 52.6) M75 x 1.5 2.01 - 2.57 (51 - 65.3) M90 x 2.0 2.44 - 3.07 (62 - 78) F L Length .63 (16) .79 (20) .79 (20) .98 (25) .98 (25) 1.57 (40) 1.97 (50) 2.48 (63) 2.95 (75) 3.74 (90) .63 (16) .63 (16) .63 (16) .63 (16) .63 (16) .63 (16) .63 (16) .63 (16) .63 (16) .79 (20) The EXIOS A2F incorporates the time-proven Hummel clamping system, which offers a large clamping range in a small gland size. A smaller gland size can often be more cost effective. * Halogen-free and Phosphorous-free * Silicone Seal and O-Ring are standard A Suggested Clearance Hole for Non-Threaded Mounting Materials Alternative Part Number Key (Last 2 letters) * Parts listed above are Raw Brass, as indicated by the part number ending BB. * For Nickel Plated Brass, order part number ending BR. * For (316L) Stainless Steel, order part number ending SS. * For Nickel Plated Brass Threads with Brass Body, order part number ending B1. * Accessories Available. C US YA- This Gland can also be used in Non-Hazardous applications! EXIOS A2F / Certificates IEC 60079-0 / 2011 EN 60079-7 / 2007 IEC 60079-1 / 2014-06 EN 60079-31 / 2009 IEC 60079-7 / 2015 EN 60529 IEC 60079-31 / 2013 IECEx Nr. DEK 12.0039X EN 60079-0 / 2009 ATEX Nr. DEKRA 12ATEX0139 X EN 60079-1 / 2007 CSA: 12.2557737X Visit www.SealconEX.com to see our wide variety of EX products! Non-Armored Solutions Ex-d A ppr oved Ex-e A ppr oved Hi/Low Temperature & Chemical Resistant Ex-i A ppr oved Intrinsically Safe (IS) (Nickel Plated Brass / 316L Stainless Steel) Standard / Multi-Hole / IS / Clamping (Nickel Plated Brass / 316L Stainless Steel) (Nylon / Nickel Plated Brass / 303 Stainless Steel) C US GL ATEX Gost www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 59 Other Products / Index -76F to 221F (-60C to 105C) Cable Range Threads Gland Thread Size Type Male Female Thread Thread A B With the EXIOS A2F, HUMMEL continues to follow the successful design of the EXIOS range of cable glands. This model is especially designed for unarmored and braided cables for the use in hazardous areas (cUS), Class 1, Zone 1, Zone 2, Zone 20, Zone 21 and Zone 22, where durability and quality is a must. Braid and cable jacket are fed into the Enclosure where the braid must be terminated inside. Other Products Industrial Enclosure Solutions We Offer A Wide Variety Of Enclosures! Other Products / Index Introducing the Hensel Enycase Features: * * * * * Protection: NEMA 4x (IP66/67) Impact Resistance: IK09 (10 Joule) Material: Polycarbonate (Black / Gray) Low Smoke: Halogen-free (V0) Quick quarter-turn lock with screwdriver Request Your Enclosure Catalog Today: 800-456-9012 / 303-699-1135 We will be happy to help you choose the correct enclosure for your application. We also provide customization by replacing standard parts with special options. Polycarbonate / ABS / Polyester / Metal Offshore Applications Features: * * * * * Square / rectangle shape Solid and transparent lids (PC & ABS) Smooth walls or PG/Metric knockouts Extension Frames (Large PC/ABS) Knockout & Membrane Flanges (Large PC/ABS) (Medium PC/ABS) * Hinges & Latches (PC) * EMI Shielding (PC EMI) upon request * Accessories: Mounting Plates, DIN Rails, Lugs, Clips, Screws, Key, etc. Accessories: Extension Frames, Mounting Plates, DIN Rails, Flanges, Screws, etc. No Minimum Orders! Large Variety of Sizes! 60 Drilling and Cutting We perform customized machining such as cutting, drilling, threading and countersinking according to drawings. Assembly The enclosures can be equipped with: * Cable glands * Flanges * Circular connectors * DIN Rails * Mounting Plates * Hinges, etc. Print Company logos, operating instructions and picture symbols can easily be silk screen printed on the enclosures. The enclosures feature a clean and functional style. Color Service In addition to the standard gray color, we also offer other color options. For large series, dyed raw material is the most cost-effective color option. Small series can be painted according to the RAL color scale. We offer total solutions! For custom solutions please provide drawing. The factory will quote based on those specs. Allow adequate time for first delivery. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Index / Cross Reference Hummel Part No. AF-xxxx-BK AF-xxxx-BR AG-xxxx-BK AG-xxxx-BR/-AL AM-xxxx-BK AM-xxxx-BR AN-xxxx-BR AP-xxxx-BK AP-xxxx-BR AT-xxxx-BR CDxxAA-BE CDxxAA-BK/-GY CDxx-AA-BR CDxxAA-CP CDxxAA-FE CDxxAA-MZ CDxxAA-RV CDxxAA-SS CDxxAA-SV CDxxAA-TE CDxxAP-BK/-GY CDxxAP-BR CDxxAR-BE CDxxAR-BK/-GY CDxx-AR-BR CDxxAR-RV CDxxAR-SS CDxxAR-SV CDxxAR-TE CDxxAS-A1 CDxxAS-01/-04 CDxxAW-BR CDxxAx-BK/-GY CDxxAx-BR CDxxBA-BK/-GY CDxxBR-BK/-GY CDxxCA-BE CDxxCA-BK/-GY CDxx-CA-BR CDxxCA-MZ CDxxCA-RV CDxxCR-BE CDxxCR-BK/-GY CDxx-CR-BR CDxxCR-RV CDxxDA-BE CDxxDA-BK/-GY CDxx-DA-BR CDxxDA-FE CDxxDA-MZ CDxxDA-RV CDxxDR-BE CDxxDR-BK/-GY CDxx-DR-BR CDxx-DR-FE CDxxDR-MZ CDxxDR-RV 1.239 / 1.273 1.039 1.171 1.171 1.239 / 1.273 1.039 1.691 1.209 1.609 1.215 1.631 1.690 1.699 1.695 1.696 1.299 1.597 1.697 1.691 1.209 1.609 1.699 1.695 1.696 1.299 1.587 1.587 1.112 1.597 1.697 1.591 1.591 1.691 1.209 1.609 1.690 1.699 1.691 1.209 1.609 1.699 1.691 1.209 1.609 1.631 1.690 1.699 1.691 1.209 1.609 1.631 1.690 1.699 Hummel Description E-M-PA / R-M-PA RE-Ms RE-Ms RE-Ms E-M-PA / R-M-PA RE-Ms HSK-M-EMV HSK-K HSK-M HSK-K-MZ-Ex HSK-M-EMV-D HSK-MZ HSK-M-PVDF HSK-INOX HSK-INOX-PVDF HSK-K-PVDF HSK-K-Multi HSK-M-Multi HSK-M-EMV HSK-K HSK-M HSK-M-PVDF HSK-INOX HSK-INOX-PVDF HSK-K-PVDF HSK-K-FLAKA HSK-K-FLAKA HSK-MINI HSK-K-Multi HSK-M-Multi HSK-KR HSK-KR HSK-M-EMV HSK-K HSK-M HSK-MZ HSK-M-PVDF HSK-M-EMV HSK-K HSK-M HSK-M-PVDF HSK-M-EMV HSK-K HSK-M HSK-M-EMV-D HSK-MZ HSK-M-PVDF HSK-M-EMV HSK-K HSK-M HSK-M-EMV-D HSK-MZ HSK-M-PVDF Sealcon Pg. No. Sealcon Part No. Hummel Part No. Hummel Description Sealcon Pg. No. 36 35 36 35 36 35 35 36 35 35 20 4 14 9 21 17 26 27 27 25 10 22 20 4 14 26 27 27 25 9 9 16 10 22 7 7 20 6 15 17 26 20 6 15 26 20 6 15 21 17 26 20 6 15 21 17 26 CDxxGA-BK/-GY CDxxGR-BK/-GY CDxx-LA-BK/-GY CDxxLP-BK/-GY CDxxLR-BK/-GY CDxxMA-BE CDxxMA-BK/-GY CDxx-MA-BR CDxxMA-FE CDxxMA-MZ CDxxMA-RV CDxxMA-SS CDxxMA-SV CDxxMA-TE CDxxMP-BK/-GY CDxxMP-BR CDxxMR-BE CDxxMR-BK/-GY CDxx-MR-BR CDxxMR-MZ CDxxMR-RV CDxxMR-SS CDxxMR-SV CDxxMR-TE CDxxMS-A1 CDxxMS-01/-04 CDxxMW-BR/-RV CDxxMx-BK/-GY CDxxMx-BR CDxxNA-BE CDxxNA-BK/-GY CDxx-NA-BR CDxxNA-FE CDxxNA-MZ CDxxNA-RV CDxxNA-6S CDxxNA-6V CDxxNA-TE CDxxNP-BK/-GY CDxxNP-BR CDxxNR-BE CDxxNR-BK/-GY CDxx-NR-BR CDxxNR-RV CDxxNR-TE CDxxNS-A1 CDxxNS-01/-04 CDxxNx-BK/-GY CDxxNx-BR CFxxAA-BE CFxxAA-BK/-GY CFxx-AA-BR CFxxAA-TE CFxxAP-BR CFxxAR-BE CFxxAR-BK/-GY CFxx-AR-BR 1.590 1.590 1.209 1.597 1.209 1.691 1.209 1.609 1.631 1.690 1.699 1.695 1.695 1.299 1.597 1.697 1.691 1.209 1.609 1.690 1.699 1.695 1.696 1.299 1.587 1.587 1.106 1.597 1.697 1.691 1.209 1.609 1.631 1.690 1.699 1.695 1.695 1.299 1.597 1.697 1.691 1.209 1.609 1.699 1.299 1.587 1.587 1.597 1.697 1.624 1.293 / 1.294 1.623 1.624 1.293 / 1.294 1.623 HSK-KE HSK-KE HSK-K HSK-K-Multi HSK-K HSK-M-EMV HSK-K HSK-M HSK-M-EMV-D HSK-MZ HSK-M-PVDF HSK-INOX HSK-INOX-PVDF HSK-K-PVDF HSK-K-Multi HSK-K-Multi HSK-M-EMV HSK-K HSK-M HSK-MZ HSK-M-PVDF HSK-INOX HSK-INOX-PVDF HSK-K-PVDF HSK-K-FLAKA HSK-K-FLAKA HSK-MINI HSK-K-Multi HSK-M-Multi HSK-M-EMV HSK-K HSK-M HSK-M-EMV-D HSK-MZ HSK-M-PVDF HSK-INOX HSK-INOX HSK-K-PVDF HSK-K-Multi HSK-M-Multi HSK-M-EMV HSK-K HSK-M HSK-M-PVDF HSK-K-PVDF HSK-K-FLAKA HSK-K-FLAKA HSK-K-Multi HSK-M-Multi HSK-M-Flex-EMV HSK-Flex HSK-M-Flex needs to be built needs to be built HSK-M-Flex-EMV HSK-Flex HSK-M-Flex 7 7 4 11 4 20 5 14 21 17 26 27 27 25 12 24 20 5 14 17 26 27 27 25 9 9 16 12 24 20 4 14 21 17 26 27 27 25 11 23 20 4 14 26 25 9 9 11 23 20 4 14 25 22 20 4 14 www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Other Products / Index Sealcon Part No. 61 Other Products / Index Index / Cross Reference 62 Sealcon Part No. Hummel Part No. CFxxAR-TE CFxxAx-BR CFxxBA-BK/-GY CFxxBR-BK/-GY CFxxCA-BE CFxxCA-BK/-GY CFxx-CA-BR CFxxCR-BE CFxxCR-BK/-GY CFxx-CR-BR CFxxDA-BE CFxxDA-BK/-GY CFxx-DA-BR CFxxDR-BE CFxx-DR-BR CFxxMA-BE CFxxMA-BK/-GY CFxx-MA-BR CFxxMA-TE CFxxMP-BR CFxxMR-BE CFxxMR-BK/-GY CFxx-MR-BR CFxxMR-TE CFxxMx-BR CFxxNA-BK/-GY CFxx-NA-BR CFxxNP-BR CFxxNR-BK/-GY CFxx-NR-BR CFxxNx-BR CXxxGx-BR CXxxMx-BR DM-xx-BK/-GY DM-xx-BR DM-xx-BR-B DP-xx-BK/-GY DP-xx-BR DP-xx-BR-B DUOxxAA-BK DUOxxAA-BR DUOxxAR-BK DUOxxAR-BR DUOxxMA-BK DUOxxMA-BR DUOxxMR-BK DUOxxMR-BR EDxxAA-BK/-GY EDxxAA-BR EDxxAR-BK/-GY EDxxAR-BR 1.594 1.594 1.624 1.293 / 1.294 1.623 1.624 1.293 / 1.294 1.623 1.624 1.293 / 1.294 1.623 1.624 1.623 1.624 1.293 / 1.294 1.623 1.624 1.293 / 1.294 1.623 1.293 / 1.294 1.623 1.293 / 1.294 1.623 1.106 1.106 1.251 1.052 1.052 1.251 1.052 1.052 1.543 1.548 1.543 1.548 1.542 1.547 1.542 1.547 1.313 1.309 1.313 1.309 Hummel Description needs to be built needs to be built HSK-KR-Flex HSK-KR-Flex HSK-M-Flex-EMV HSK-Flex HSK-M-Flex HSK-M-Flex-EMV HSK-Flex HSK-M-Flex HSK-M-Flex-EMV HSK-Flex HSK-M-Flex HSK-M-Flex-EMV HSK-M-Flex HSK-M-Flex-EMV HSK-Flex HSK-M-Flex needs to be built needs to be built HSK-M-Flex-EMV HSK-Flex HSK-M-Flex needs to be built needs to be built HSK-Flex HSK-M-Flex needs to be built HSK-Flex HSK-M-Flex needs to be built HSK-XL HSK-XL V-N-FS V-N-Ms V-N-Ms-SD V-N-FS V-N-Ms V-N-Ms-SD Snapclic-DUO-PA Snapclic-DUO-Ms Snapclic-DUO-PA Snapclic-DUO-Ms Snapclic-DUO-PA Snapclic-DUO-Ms Snapclic-DUO-PA Snapclic-DUO-Ms HSK-W HSK-M-W HSK-W HSK-M-W Sealcon Pg. No. Sealcon Part No. Hummel Part No. Hummel Description Sealcon Pg. No. 25 22 7 7 20 6 15 20 6 15 20 6 15 20 15 20 5 14 25 24 20 5 14 25 24 4 14 23 4 14 23 16 16 33 33 33 33 33 33 46 46 46 46 46 46 46 46 8 17 8 17 EDxxFA-BR EDxxFR-BR EDxxMA-BK/-GY EDxxMA-BR EDxxMR-BK/-GY EDxxMR-BR EDxxNA-BK/-GY EDxxNR-BK/-GY EFxxAA-BK/-GY EFxxAR-BK/-GY EFxxMA-BK/-GY EFxxMR-BK/-GY EFxxNA-BK/-GY EFxxNR-BK/-GY EMxxAA-BK EMxxMA-BK EMxxNA-BK EM-xxxx-BK EM-xxxx-BR EN-xxxx-BR EP-xxxx-BR ETxxNA-BK FL-xx-BK FT-xx-BK GS-xxxx-SA GS-xxxx-SB HM-xx-BK HM-xx-BR HM-xx-BR-B HM-xx-BR-V HM-xx-SS-B HM-xx-SS-S HM-xx-SS-V HN-xx-BK HP-xx-BK HP-xx-BR HP-xx-BR-B HP-xx-BR-V HP-xx-SS-B HP-xx-SS-S HP-xx-SS-V KLxxMA-BR MFCxx MFMxxxx-BR MFSMxxxx-BR MP-xxxx-SPA MP-xxxx-SPB MP-xxxx-SPC MPMxxxx-BR MPSMxxxx-BR NG-xx-XL NM-xx-BE 1.309 1.309 1.313 1.309 1.313 1.309 1.313 1.313 1.314 1.314 1.314 1.314 1.314 1.314 1.513 1.513 1.513 1.239 1.033 1.033 1.223 1.312 1.312 1.560 1.561 1.255 1.155 1.156 1.157 1.152 1.154 1.153 1.255 1.155 1.156 1.157 1.152 1.154 1.153 1.143 1.574 1.570 1.571 1.562 1.563 1.564 1.572 1.573 1.106 1.167 HSK-M-W HSK-M-W HSK-W HSK-M-W HSK-W HSK-M-W HSK-W HSK-W HSK-W-Flex HSK-W-Flex HSK-W-Flex HSK-W-Flex HSK-W-Flex HSK-W-Flex SM-W SM-W SM-W E-M-PA E-Ms E-Ms EH-W KF-G KF-G Meleon A Meleon B V-NE V-NE-Ms V-NE-Ms-SD V-NE-Ms-SD-FKM V-INOX V-INOX-VMQ V-INOX-FKM V-NE V-NE-Ms V-NE-Ms-SD V-NE-Ms-SD-FKM V-INOX-NBR V-INOX-VMQ V-INOX-FKM KLE MeleonFit Clip MeleonFit MeleonFit S Meleon Pro A Meleon Pro B Meleon Pro C MeleonFit Pro MeleonFit Pro S GM-Ms (XL) GM-EMV 17 17 8 17 8 17 8 8 8 8 8 8 8 8 43 43 43 40 40 40 40 47 46 46 48 48 32 33 33 33 33 33 33 32 32 33 38 33 33 33 33 34 50 48 48 49 49 49 50 50 16 30 www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice Index / Cross Reference M12 Cordsets Hummel Part No. Hummel Description Sealcon Pg. No. Sealcon Part No. Hummel Part No. NM-xx-BK/-GY NM-xx-BR NM-xx-XL NN-xx-BE NN-xx-BK/-GY NN-xx-BR NN-xx-ST NP-xx-BE NP-xx-BK/-GY NP-xx-BR OM-xx-BN/-VT OM-xx-SI OR-xx-BN/-VT OR-xx-SI PEMxxxx-BK PFCxx PFMxxxx-BK PFTxx PFYxxxxxx PL-xx-BK PS-xxxx-BK 1.262 1.161 1.161 1.262 1.161 1.167 1.262 1.161 1.321 1.321 1.321 1.321 1.535 1.534 1.533 1.536 1.537 1.280 1.527 GM-FS GM-Ms GM-Ms (XL) GM-FS GM-Ms GM-EMV GM-FS GM-Ms O-Ring O-Ring / Silicone O-Ring O-Ring / Silicone PoleonFit PoleonFit Clip PoleonFit PoleonFit T PoleonFit Y HSK-V Poleon Slit 29 29 16 30 29 29 30 30 29 29 31 31 31 31 44 42 44 44 44 31 42 RB-xxxx-02 RM-xxxx-BK RM-xxxx-BR RM-xxxx-SS RM-xxxx-SS-B RN-xxxx-BR RP-xxxx-BR RP-xxxx-SS RQ-xxxx-BR RQ-xxxx-SS RR-xxxx-BR RR-xxxx-GY SM-xxxx-HY SMxxAA/MA-BK SMxxNA-BK SM-xx-NY/-HD SM-xxxx-BK SM-xxxx-HY SR-xx-NY/-HD STxxAA/NA-BK 1.273 1.077 1.094 1.097 1.074 1.094 1.077 1.097 1.071 / 1.076 1.236 / 1.272 1.510 1.511 1.511 1.325 1.510 1.524 1.325 1.220 Hummel Description R-M-PA RSD-Ms RS-INOX RSD-INOX RS-Ms RS-INOX RSD-Ms RSD-INOX R-H R-FS Poleon Superflex SM-N SM-N Thread Seal Rings SM-WS-PA EH-HY Thread Seal Rings EH Sealcon Pg. No. 38 38 37 39 39 32 37 39 37 39 37 38 47 43 43 31 42 47 31 47 Other Products / Index Sealcon Part No. Sealcon's M12 Cordsets are ideal for Automation and Manufacturing! Automation in manufacturing is increasing at the speed of technology. With IIoT and smart machines, a durable and reliable connectivity solution is required to maximize output. Sealcon now has M12 connector cordsets that are ideal for your application and will meet and exceed the demands of the industry. With straight male and female, right angle and open ended cordsets available, numerous options are possible. Whether you are looking for just a few or few thousand cordsets, Sealcon can provide the solution. Contact Sealcon today to reference your application! Coding Options: A, B, D PINS: 4, 5, 6, 8 Cable Jacket: PVC or PUR Length: 2m, 3m, 5m, 10m Protection: IP 67 Operating Temperature: -22F - 158F (-30C - 70C) Contact Material: Brass Contact Surface: Nickel Inserts: V0 PA66 / Fiber Glass Overmold: Thermoplastic Elastometer Endless Applications Including: * Motors * Lighting * Conveyors * Robotics * Actuators * Drives * Instrumentation * Sensors Yellow M12 Right Angle Female Thread Yellow M12 Straight Male Thread www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 63 Check out some of our other great Sealcon products! Many of Sealcon's strain relief fittings, enclosures, and circular connectors are available with EX / ATEX approvals. For more information, please visit our Sealcon EX website: www.SealconEX.com Further information on the products presented here and everything else Sealcon has to offer can be found on our website: www.SealconUSA.com Our website is consistently updated with new information. Sealcon catalogs, product announcements, videos and reference guides are also available for download online. Leading Provider of Cable Management Solutions 7374 S. Eagle Street Centennial, CO 80112 USA Toll Free: 800-456-9012 / 303-699-1135 Fax: 303-680-5344 Email: Info@SealconUSA.com Web: www.SealconUSA.com 0817