Packaging
Specification
107-20284
Rev. A1 Page 2 of 6
LOC I
FTEC174 rev. 1 July 99
1. SCOPE
This specification covers the packaging material and standard method for the “4 POS. WIRE TO WIRE
I.D.C. CONNECTOR” in the versions listed below:
• Standard versions: P/N 5-293172-1, P/N 5-293172-5.
• Cable-end versions: P/N 5-293172-2.
2. MATERIAL
2.1 Carton box P/N 2-1196630-4 (or equivalent)
2.2 Folding carton box P/N 1191726-1
2.3 Plastic bag P/N 4-1192361-8 (or equivalent)
2.4 Self Adhesive Label P/N 999639-1 (for SAP Countries) or P/N 999102-1 (for NON SAP Countries)
2.5 Carton or plastic pad (to use as filling if necessary)
2.6 Self-adhesive tape (transparent and without any logo)
2.7 Plastic stretch wrap film
2.8 Wooden pallet (L = 1200mm, W = 800mm, H = 130mm)