NP2CM-R
Mono 1/4" MIL-plug (MIL-P-642/4), red metal housing, brass
contacts
Professional phone plugs in MIL type design according MIL
standard MIL-P-642/*. They are featuring similar construction as
the standard Neutrik phone plugs with chuck type strain relief
and slimline metal barrel to meet the high requirements for
military communication equipments. These plugs are not
compatible with standard 1/4" jacks (acc. EIA RS453) and patch
panels.
Features & Benefits
Mono 1/4" MIL-plug (MIL-P-642/4)
•One-piece Tip conductor ensures secure conductivity
•
Metal shell and chuck type cable retention - robust
and dependable
•
NP2CM-R 1/3
Technical Information
Product
Title NP2CM-R
Connection Type Plug
Gender male
Electrical
Contact resistance depends on mating connector mΩ
Dielectric strength 1 kVdc
Insulation resistance > 2 GΩ (initial)
Rated current per contact depends on mating connector A
Rated voltage < 50 V
Mechanical
Cable O.D. 4 - 7 mm
Lifetime > 1000 mating cycles
Wiresize 1 mm²
Wiresize 18 AWG
Wiring Solder contacts
Material
Bushing Polyacetal (POM) + PU
Contact plating 2 µm Brass
Contacts Brass (CuZn39Pb3)
Insert Polyamide (PA 6.6 30 % GR)
Shell Brass (CuZn39Pb3)
Shell plating Red coated
Strain relief Polyacetal (POM)
NP2CM-R 2/3
Environmental
Standard compliance MIL-P-642/4
Solderability Complies with IEC 68-2-20
Temperature range -20 °C to +65 °C
NP2CM-R 3/3
