Reinforced Infocom Connectors for Harsh Environment RJ Field - USB Field Amphenol Rugged Digital Networks Solutions 2014 y l u J te upda Connecting to people + technology www.rjfield.com table of contents Rugged Ethernet solutions Field installable RJFRB: plastic circular shell - reverse bayonet coupling..............................................................................................................................................10 RJF544: plastic circular shell - push pull coupling.........................................................................................................................................................13 RJFEZ: plastic rectangular shell - lever coupling............................................................................................................................................................15 RJF: metallic circular shell based on MIL-DTL-26482 H - bayonet coupling ......................................................................................................17 RJF special receptacles: inline receptacles and PC tails receptacles.......................................................................................................................20 NEW RJF receptacles and plug with 360 EMI backshells......................................................................................................................................................21 RJF transversally sealed receptacles...................................................................................................................................................................................22 RJF hermetic receptacles .......................................................................................................................................................................................................23 NEW RJF for big insulation wire up to 1.6 mm [0.062 inch]..................................................................................................................................................24 RJ Field receptacle with self closing cap ..........................................................................................................................................................................25 RJFTV: metallic circular shell based on MIL-DTL-38999 series III - thread coupling with anti-decoupling device................................26 Metallic self closing cap (SCC) for RJFTV square flange receptacle........................................................................................................................29 RJFTV receptacles and plugs with 360 EMI backshells...............................................................................................................................................30 RJFTV through bulkhead receptacles.................................................................................................................................................................................32 RJFTV stand off receptacles...................................................................................................................................................................................................33 NEW RJFTV transversally sealed receptacles..............................................................................................................................................................................36 NEW RJFTV hermetic receptacles...................................................................................................................................................................................................37 NEW RJFTV for big insulation wire up to 1.6 mm.....................................................................................................................................................................38 RJ45/M12 adaptor......................................................................................................................................................................................................................39 Special RJ45 adaptor for military & commercial aeronautics....................................................................................................................................40 High reliability Cat5E Ethernet cable and cordsets.......................................................................................................................................................41 W E High reliability Cat6 Ethernet cable and cordsets.........................................................................................................................................................42 N NEW High reliability Cat6A Ethernet cable and cordsets......................................................................................................................................................43 NEW Cable assemblies RJ45/M12 railway cable solution..........................................................................................................................................................................................46 Jumper railway intercoach.....................................................................................................................................................................................................47 Rugged electronics Military Ethernet media converter for harsh environment, fully MIL-STD compliant NEW RES-GMC with expanded beam technology: unmanaged military Ethernet media converter - 2 Gigabit ports .................................50 RES-GMC with butt joint fiber connector: unmanaged military Ethernet media converter - 2 or 4 Gigabit ports .............................52 RES-GMC-1M-FORC: military Ethernet media converter with remote control .................................................................................................54 Military Ethernet switch for harsh environment, fully MIL-STD compliant W RES-SCE-AC-8US: unmanaged miniature portable Ethernet switch - 8 fast ports ...........................................................................................56 NE RES-SCE-8MG: managed miniature portable Ethernet switch - 8 Gigabit ports ................................................................................................58 RESMLAC-8US-CAPS: unmanaged military Ethernet switch, MIL-DTL-38999 connectors - 8 fast ports ..................................................60 RJSMLAC-8UG-CAPS: unmanaged military Ethernet switch, MIL-DTL-38999 connectors - 8 Gigabit ports ...........................................62 RJSMLAC-8MG-CAPS: managed military Ethernet switch, RJFTV connectors - 8 Gigabit ports ..................................................................64 RESMLAC-8MG-CAPS: managed military Ethernet switch, MIL-DTL-38999 connectors - 8 Gigabit ports ...............................................66 RESMLAC-8MG-CAPS F35: managed military Ethernet switch, MIL-DTL-38999 connectors - 8 Gigabit ports .......................................68 RESMLAC-28MG: managed military Ethernet switch - 24 Gigabit + 4 combo 10G ports ..............................................................................70 Military Ethernet switch for harsh environment with industrial EMI compliancy RJSML-8US1 and RJSML-8UG1: unmanaged military Ethernet switch, fast or Gigabit ..................................................................................73 RJSML-MG7F3G : managed military Ethernet switch - 7 fast ports + 3 Gigabit ports .....................................................................................77 Industrial Ethernet switch for harsh environment RJSPC: unmanaged or ring industrial Ethernet switch - 5 fast ports ...................................................................................................................81 Rugged USB solutions (USB3.0 & USB2.0) Field installable USB3.0 NEW USB3FTV (USB-A) ............................................................................................................................................................................................................................................................86 NEW USB3F TV transversally sealed receptacles ......................................................................................................................................................................90 NEW USB3F TV hermetic receptacles ............................................................................................................................................................................................93 NEW USB3 receptacle with self closing cap ...............................................................................................................................................................................94 NEW Metallic self closing cap (SCC) for USB3F TV square flange receptacles ...............................................................................................................95 NEW High reliability USB 3.0 cordsets ..........................................................................................................................................................................................96 USB2.0 USBFTV (USB-A) ...............................................................................................................................................................................................................................................................97 USBF TV transversally sealed receptacles ......................................................................................................................................................................100 USBF TV hermetic receptacles ............................................................................................................................................................................................102 USBFTV receptacles with 360 EMI backshells .............................................................................................................................................................103 USBF TV through bulkhead receptacles..........................................................................................................................................................................104 USBF TV stand off receptacles ............................................................................................................................................................................................105 USB 2.0 receptacle with self closing cap (SCC) ............................................................................................................................................................107 Metallic self closing cap (SCC) for USBF TV square flange receptacles ................................................................................................................108 High reliability USB 2.0 cordsets ........................................................................................................................................................................................109 USBF SC - Quick release series ...........................................................................................................................................................................................110 USBBF TV (USB-B) ....................................................................................................................................................................................................................112 USBBF TV stand off receptacles .........................................................................................................................................................................................115 USBBF TV transversally sealed receptacles ....................................................................................................................................................................117 USBB receptacle with self closing cap .............................................................................................................................................................................118 Metallic self closing cap (SCC) for USBB square flange receptacles .....................................................................................................................119 NEW Special USB adaptor for Military & Commercial Aeronautics .................................................................................................................................120 Cable assemblies USB-A plastic & neoprene solutions with self closing cap (SCC).............................................................................................................................122 USB-B Field plastic - Overmolded cordset plug.............................................................................................................................................................125 Rugged Electronics NEW Reinforced USB3FTV & USBFTV 2.0 memory keys........................................................................................................................................................128 Reinforced USB memory keys..............................................................................................................................................................................................129 NEW Reinforced USB amplifier.......................................................................................................................................................................................................130 ATEX Solutions RJFTVX, USBFTVX, RJ11FTVX - RJ45, USB, RJ11/12 explosion proof solutions for Zone 2.............................................................................132 RJSPCEX Atex Zone 2 Rugged & IP68................................................................................................................................................................................138 Other Rugged solutions Field installable FWFTV: metallic circular shell based on MIL-DTL-38999 series III - thread coupling with anti-decoupling device.............................140 IEEE1394 receptacle with self closing cap ......................................................................................................................................................................143 RJ11F: metallic circular shell based on MIL-DTL-26482 H - bayonet coupling...................................................................................................144 Special RJ11 adaptor for Military & Commercial Aeronautics..................................................................................................................................146 MTRJF TV: fiber optic solution - metallic circular shell based on MIL-DTL-38999 series III ...........................................................................148 LC Field: fiber optic solution - metallic circular shell based on MIL-DTL-38999 series III...............................................................................150 Glossary .................................................................................................................................................................................................................................152 RUGGED ETHERNET SOLUTION SELECTION GUIDE Connectors Series Indust. Ethernet Spec. RJF RB Coupling Mechanism Shape Material Specification Prime Market Page Reverse Bayonet Circular Plastic N/A Industrial & Telecom 10 RJF544 IEC 60603-7 variant 12 Push Pull Circular Plastic N/A Industrial & Telecom 13 RJF EZ IEC 60603-7 variant 13 Lever Rectangular Plastic N/A Industrial & Telecom 15 RJF IEC 60603-7 variant 11 Bayonet Circular Metal MIL-DTL-26482 Industrial Mil/Aero 17 RJF in line recepatcles & IEC 60603-7 variant 11 PC tails receptacles Bayonet Circular Metal MIL-DTL-26482 Industrial Mil/Aero 20 RJF receptacles & plugs with 360 EMI backshells Bayonet Circular Metal MIL-DTL-26482 Industrial Mil/Aero 21 D RJF transversally sealed receptacles Bayonet Circular Metal MIL-DTL-26482 Mil/Aero & Industrial 22 I RJF hermetic receptacles Bayonet Circular Metal MIL-DTL-26482 Mil/Aero & Industrial 23 RJF for big insulation wire up to 1.6mm [0.062 inch] Bayonet Circular Metal MIL-DTL-26482 Industrial Mil/Aero 24 RJFTV Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero & Rail Mass Transit 26 RJF TV receptacles & plugs with 360 EMI backshells Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero & Rail Mass Transit 30 RJF TV through bulkhead receptacles Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero & Rail Mass Transit 32 RJF TV stand off receptacles Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero & Rail Mass Transit 33 RJFTV transversally sealed receptacles Bayonet or Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero & Industrial 36 RJFTV hermetic receptacles Bayonet or Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero & Industrial 37 RJF TV for big insulation wireup to 1.6 mm Bayonet or Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero 38 RJ45/M12 adaptors Circular Metal Industrial & Rail Mass Transit 39 Special RJ45 adaptor for Military & Commercial Aeronautics Circular Metal Industrial & Rail Mass Transit 40 F I NEW E L N NEW S T A L L A B L E NEW NEW NEW F I E L D Cables I N S T A L NEW L A B NEW L E Series C A B L E Connectors G G E Material Specification Prime Market Page Mil/Aero & Industrial 41 High reliability Cat 6 cable and cordsets Mil/Aero & Industrial 42 High reliability Cat 6A cable and cordsets Mil/Aero & Industrial 43 Coupling Mechanism Shape Material RJ45/M12 Railway cable solution Bayonet Circular Metal Jumper Thread Circular Series Indust. Ethernet Spec. # of ports RES-GMC Media converter with Expanded Beam Tech. IP67/68 Unmanaged RES-GMC Media converter with Butt Joint Fiber connect. IP67/68 RES-GMC-1M-FORC Media converter with Remote Control MIL-DTL-26482 Industrial & Rail Mass Transit 46 MIL-DTL-38999 Series III Rail Mass Transit 47 50 Unmanaged 2 or 4 Gb ports Mil/Aero 52 IP67/68 Unmanaged 1 Gb port + 1 Fiber port Mil/Aero 54 RES-SCE-AC-8US miniature portable switch IP67/68 Unmanaged 8 Fast ports Mil/Aero 56 RES-SCE-AC-8MG miniature portable switch IP67/68 Managed 8 Gb ports Mil/Aero 58 NEW RESMLAC-8US-CAPS military Ethernet switch MIL-DTL-38999 connectors IP67/68 Unmanaged 8 Fast ports Mil/Aero 60 NEW RJSMLAC-8UG-CAPS military Ethernet switch MIL-DTL-38999 connectors IP67/68 Unmanaged 8 Gb ports Mil/Aero 62 NEW RJSMLAC-8MG-CAPS military Ethernet switch RJFTV connectors IP67/68 Managed 8 Gb ports Mil/Aero 64 NEW RESMLAC-8MG-CAPS military Ethernet switch MIL-DTL-38999 connectors IP67/68 Managed 8 Gb ports Mil/Aero 66 NEW RESMLAC-8MG-CAPS-F35 military Ethernet switch MIL-DTL-38999 connectors IP67/68 Managed 8 Gb ports Mil/Aero 68 RESMLAC-28MG military Ethernet switch IP67/68 Managed 24 Gb + 4 combo 10G ports Mil/Aero 70 RJSML-8US1 & RJSML-8UG1 military Ethernet switch IP67/68 Unmanaged 8 Gb ports Mil/Aero 73 RJSML-MG7F3G military Ethernet switch IP67/68 Managed 7 fast + 3 Gb ports Mil/Aero 77 RJSPC industrial Ethernet switch IP67/68 Unmanaged 5 fast ports Industrial 81 NEW Type Page Mil/Aero NEW Sealing Prime Market 2 Gb ports NEW Series Metal Specification Page NEW U Shape Prime Market NEW R Coupling Mechanism High reliability Cat 5E cable and cordsets Connectors A S NEW S E M B L NEW I E S Indust. Ethernet Spec. Specification D E L E C T R O N I C S NEW For ATEX version, see page 138 RUGGED USB SOLUTION SELECTION GUIDE Connectors NEW NEW NEW Series Coupling Mechanism Shape Material Specification Prime Market Page USB3FTV (USB-A) Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero, Rail Mass Transit & Industrial 86 USB3F TV transversally sealed receptacles Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero, Rail Mass Transit & Industrial 90 USB3F TV hermetic receptacles Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero & Industrial 93 Mil/Aero, Rail Mass Transit & Industrial 96 NEW F High reliability USB 3.0 Cordsets I E USBFTV (USB-A) Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero, Rail Mass Transit & Industrial 97 USBF TV transversally sealed receptacles Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero, Rail Mass Transit & Industrial 100 USBF TV hermetic receptacles Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero & Industrial 102 USBF TV special receptacles with 360 EMI backshells Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero, Rail Mass Transit & Industrial 103 Special USB through bulkhead receptacles Thread Circular Metal MIL-DTL-38999 Series III MIl/Aero & Industrial 104 USBF TV stand off receptacles Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero, Rail Mass transit & Industrial 105 Mil/Aero, Rail Mass Transit & Industrial 109 L D I N S T A L L A B L E High reliability USB 2.0 Cordsets USBF SC Quick release series Spring Release Circular Metal N/A Mil/Aero & Industrial 110 USBBF TV (USB-B) Thread Circula Metal MIL-DTL-38999 Series III Mil/Aero, Rail Mass Transit & Industrial 112 USBBF TV stand off receptacles Thread Circular Metal MIL-DTL-38999 Mil/Aero, Rail Mass Transit Series III & Industrial 115 USBBF TV transversally sealed receptacles Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero, Rail Mass Transit & Industrial 117 Special USB adaptor for Military & Commercial Aeronautics Circular Metal Aeronautic 120 Connectors A S S E M B L I E S C A B L E R U G G E D Coupling Series USB-A plastic with Self Closing Cap E L E C T R O N I NEW C S Shape Material Circular Plastic N/A Industrial & Telecom 122 Mechanism Specification Prime Market Page USB B Field Plastic shell Overmolded cordset plug Thread Circular Plastic N/A Industrial & Telecom 125 Reinforced USB3FTV & USB 2.0 Memory Keys Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero & industrial 128 Reinforced USB Memory Keys Bayonet Circular Metal N/A Mil/Aero & Industrial 129 Reinforced USB 2.0 amplifier Thread Circular Metal MIL-DTL-38999 Mil/Aero & Industrial Series III 130 RUGGED ATEX ZONE 2 SOLUTION GUIDE Connectors R U G G E D E L E C T R O N I C S Series RJFTVX, USBFTVX RJ11FTVX Connectors Series RJSPCEX Coupling mechanism Shape IP68 Sealing IP68 Material Specification Metal Material Plastic Number of ports Unmanaged Ring 5 X X Prime Market Page Factory Automation, Video, Oil & Gaz 132 Prime Market Oil & Gas Page 138 OTHER RUGGED SOLUTIONS Connectors Series Coupling Mechanism Shape Material Specification Prime Market Page FWFTV (FireWire) Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero & Video 140 RJ11F (RJ11) Bayonet Circular Metal MIL-C-26482 MIL/Aero & Industrial 144 Circular Metal Aeronautic 146 F I E L D I N S T NEW Special RJ11 adaptor for Military & Commercial Aeronautics A L L MTRJFTV (MTRJ) Fiber optic solution Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero & Rail Mass Transit 148 LC Field Fiber optic solution Thread Circular Metal MIL-DTL-38999 Series III Mil/Aero & Rail Mass Transit 150 A B L E NOTES .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. Amphenol .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. 8 8 Rugged Ethernet Solutions Field installable RJF RB: plastic circular shell - reverse bayonet coupling .............................................................................................................................................. 10 RJF544: plastic circular shell - push pull coupling ............................................................................................................................... 13 RJF EZ: plastic rectangular shell - lever coupling ................................................................................................................................ 15 RJF: metallic circular shell based on MIL-DTL-26482 H - bayonet coupling ............................................................................... 17 RJF special receptacles: inline receptacles & PC tails receptacles .................................................................................................. 20 NEW RJF receptacles & plugs with 360 EMI backshells ............................................................................................................................... 21 NEW RJF transversally sealed receptacles........................................................................................................................................................... 22 Amphenol table of contents RJF hermetic receptacles ............................................................................................................................................................................... 23 RJF for big insulation wire up to 1.6 mm [0.062 inch] ........................................................................................................................ 24 Self Closing Cap (SCC) for RJ Field receptacles ..................................................................................................................................... 25 RJF TV: metallic circular shell based on MIL-DTL-38999 series III - thread coupling with anti-decoupling device ..... 26 Metallic self closing cap (SCC) for RJFTV square flange receptacles.............................................................................................. 29 RJF TV receptacles and plugs with 360 EMI backshells .................................................................................................................... 30 RJF TV through bulkhead receptacles ...................................................................................................................................................... 32 RJF TV stand off receptacles ......................................................................................................................................................................... 33 NEW RJF TV transversally sealed receptacles ................................................................................................................................................... NEW RJF TV hermetic receptacles ........................................................................................................................................................................ 36 37 NEW RJF TV for big insulation wire up to 1.6 mm ........................................................................................................................................... 38 RJ45/M12 adaptators ...................................................................................................................................................................................... 39 Special RJ45 adaptators for Military & Commercial Aeronautics .................................................................................................... 40 High reliability Cat 5E Ethernet cable & cordsets ................................................................................................................................. 41 NEW High reliability Cat 6 Ethernet cable & cordsets ................................................................................................................................... 42 NEW High reliability Cat 6A Ethernet cable & cordsets ................................................................................................................................ 43 9 ROHS compliant RJF RB Ethernet connection system for harsh environment - Industrial Ethernet RJFRB allows you to use an Ethernet Class D / Cat 5e and Class E / Cat 6 connection for 10 BaseT, 100 BaseTX or 1000 BaseT networks in harsh environments. With the patented RJStop(R) system you can use a standard RJ45 cordset in a protective composite plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling and grounding! Applications n Telecom equipments Main characteristics n Special machines n Sealed against fluids and dust (IP68) n Shock, vibration and traction resistant n No cabling operation in field, no tools required n Reverse bayonet coupling n RJ45 cordset retention in the plug: 70 N in the axis n Mating cycles: 500 min n Compatible with cable diameter from 5,5 mm [0.216 in] to 7 mm [0.275 in] n Motion control Environmental protection n Video control n Robotics n Industrial process control n CNC machines Data transmission n Sealing: IP68 n Salt spray > 1000 h n Fire retardant / Low smoke: UL94 V0 and NFF 16102, DIN 5510-2 n Operating temperature: - 40C / +85C Amphenol 10 BaseT, 100 BaseTX and 1000 BaseT networks Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 Cat6 per TIA/EIA 568B and ClassE per ISO/IEC 11801 Part number code RJF RB Shell type 6: composite reverse bayonet plug, plastic gland 7: composite jam nut receptacle Back terminations (for receptacles only) 1: female RJ45 1RA: right angle female RJ45 2: RJ45 Cordset 3U: IDC cat6 - unshielded 3F: IDC cat6 - partial shielding 3S: IDC cat6 - 100% shielded 5: straight PCB Cordset length (for receptacles with "2" back termination only) 03 100BTX: 0.3m [11.81 inches] 05 100BTX: 0.5m [19.68 inches] 10 100BTX: 1m [39.37 inches] 15 100BTX: 1.5m [59.05 inches] Remark: cabling configuration 100 BTX = 568B (Ethernet specification) Examples: 10 - Plug: RJF RB 6 - Receptacle, female RJ45 Back termination: RJF RB 71 - Receptacle, right angle female RJ45 back termination: RJF RB 71RA - Receptacle, 1,5m [59.05"] RJ45 cordset termination: RJF RB 72 15 100BTX 7 1RA Plug n Type 6 shell with plastic gland RJF RB 6 Receptacles n Type 1: female RJ45 (front mounting) Panel Drilling RJF RB 71 n T ype 1RA: right angle female RJ45 (front mounting) Panel Drilling Amphenol RJFRB71RA n Type 2: RJ45 cordset (front mounting) Panel Drilling RJFRB72XX 100BTX (XX=03, 05, 10 or 15 - see part number code page 10) n Type3: IDC CAT 6 termination (rear mounting) Unshielded: RJF RB 73U Partial shielding RJF RB 73F Panel Drilling Shielded: RJFRB73S 11 n Straight PCB termination receptacle: (rear mounting) Panel Drilling Part number: RJF RB 75 IMPORTANT NOTE PCB drilling RJFRB The customer's PCB design will determine the receptacle category. Assembly instructions Amphenol 1 2 3 4 5 6 7 8 Accessories n IP68 Dust caps RJF RB C7 RJF RB C75 Cap for receptacles RJFRB71 / 71RA / 72xxx 12 3 3 2 3 Cap for receptacles RJFRB75 and RJFRB73x 4 4 3 2 ROHS compliant RJF 544 Ethernet connection system for harsh environment - Industrial Ethernet RJF544 allows you to use an Ethernet Class D / Cat 5e connection for 10 BaseT, 100 Base TX or 1000 BaseT networks in harsh environments. With the patented RJStop(R) system you can use a standard RJ45 cordset in a protective composite plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling and grounding ! Main characteristics Applications n Compliant with IEC 60603-7 variante 12 n Shock, vibration and traction resistant n No cabling operation in field and no tools required n Sealed against fluids and dust (IP68) n Quick push pull coupling n RJ45 cordset retention in the plug: 100 N in the axis n Mating cycles: 500 min n Improved EMI Protection nC ompatible with cable diameter from 6 mm [0.236 in] to 13 mm [0.512 in] nTelecom equipment n Video control n Robotics n Industrial process control nCNC machines n Special machines n Motion control n Tele-maintenance Data transmission 10 BaseT, 100 BaseTX and 1000 BaseT networks Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 Environmental protection n Sealing: IP68 n Salt spray > 1000 h n Fire retardant / Low smoke: UL94 V0 and NFF 16102, DIN 5510-2 n Vibrations: 10 - 500 Hz, 10 g, 3 axes: no discontinuity > 10 nano s. n Operating temperature: - 40C / +85C Amphenol NEW Now available with tranversal sealing* *Seald in unmated condition Part number code RJF 544 2 2 03 100BTX Shell type 6: composite push pull plug, plastic gland 2: composite square flange receptacle 2S: composite square flange receptacle transversally sealed 2M: metallized (Ni) composite square flange receptacle 2SM: metallized (Ni) composite square flange receptacle transversally sealed Back terminations (for receptacles only) 1: female RJ45 1RA: right angle female RJ45 2: RJ45 cordset Cordset length (for receptacles with "2" back termination only) - Other lengths are available on demand 03 100BTX: 0.3 meters [11.81 inches] 05 100BTX: 0.5 meters [19.68 inches] 10 100BTX: 1 meter [39.37 inches] 15 100BTX: 1.5 meters [59.05 inches] 00: 8 tinned holes at the rear of the PCB to solder the cable Remark: cabling configuration 100 BTX = 568B (Ethernet specification) Examples: - Plug: RJF 544 6 - Square flange receptacle, female RJ45 back termination: RJF 544 21 - Metallized square flange receptacle, female RJ45 back termination: RJF 544 2M 1 - Square flange receptacle, 1,5m [59.05"] 100 BTX cordset termination: RJF 544 22 15 100BTX - Square flange receptacle, solder termination: RJF 544 22 00 - Transversally sealed receptacle female RJ45 back termination: RJF544 2S1 13 Plug n Type 6 shell with plastic gland RJF 544 6 Receptacle n Type 2S/2M/2SM shell: square flange receptacle with 4 mounting holes RJF 544 2x 1 RA RJF 544 2x 1 Amphenol Back terminations Panel Drilling Type1: RJ45 Type 1:female Female RJ45 Type 1: Female RJ45 Type1RA: right female RJ45 Type 2: RJ45 Cordset Type 1:angle Female RJ45 Type Cordset Type2: Type 2RJ45 - 00:cordset Solder - 8 tinned holes Type 2: 2: RJ45 RJ45 Cordset Notes: type 2 without RJ45 plug at the end of the cable is also available: consult factory Accessories nRubber IP68 receptacle cap p/n RJF 544BESC nPanel gasket p/n RJF 544 02JE n Panel gasket (thickness: 0.6mm [.039]): p/n RJF 544 02 JE n Plug Insert removal tool: p/n 5440 OT 02 14 n IP68 caps for plug p/n 544 02 BM Type 2 Solder - holes 2 - 00: solder 8 tinned holes TypeType 2 -- 00: 00: Solder -8 8- tinned tinned holes ROHS compliant RJF EZ Ethernet connection system for harsh environment - Industrial Ethernet RJFEZ allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT,100 BaseTX or 1000 BaseT networks in harsh environments. With the patented RJStop(R) system you can use a standard RJ45 cordset in a protective composite plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling and grounding! Applications n Telecom equipment n Video control n Robotics n Industrial process control n CNC machines n Special machines n Motion control n Tele-maintenance Main characteristics n Compliant with IEC 60603-7 variante 13 n Sealed against fluids and dust (IP68) n Shock, vibration and traction resistant n No cabling operation in field and no tools required n Quick lever coupling n RJ45 cordset retention in the plug: 70 N in the axis n Mating cycles: 500 min nC ompatible with cable diameter from 5,5 mm [0.216 in] to 7 mm [0.275 in] Environmental protection 10 BaseT, 100 BaseTX and 1000 BaseT networks Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 n Sealing: IP68 n Salt spray > 1000 h n Fire retardant / Low smoke: UL94 V0 and NFF 16102, DIN 5510-2 n Operating temperature: - 40C / +85C Part number code RJF EZ 2 2 03 100BTX Amphenol Data transmission Shell type 6: composite lever plug, plastic gland 2: composite square flange receptacle Back terminations (for receptacles only) 1: female RJ45 2: RJ45 cordset Cordset length (for receptacles with "2" back termination only) 03 100BTX: 0.3m [11.81 inches] 05 100BTX: 0.5m [19.68 inches] 10 100BTX: 1m [39.37 inches] 15 100BTX: 1.5m [59.05 inches] Remark: Cabling configuration 100 BTX = 568B (Ethernet specification) Examples: - Plug: RJF EZ 6 - Receptacle, female RJ45 back termination: RJF EZ 21 - Receptacle, 1,5m [59.05"] 100 BTX cordset termination: RJF EZ 22 15 100BTX 15 Plug Receptacles Panel Drilling Back terminations Amphenol TypeType 1: Female RJ45 1: female RJ45 Type RJ45 Cordset Type 2:2:RJ45 cordset Notes: type 2 without RJ45 plug at the end of the cable is also available: consult factory Assembly instructions Accessories n IP68 dust caps For plugs: not available For receptacles: RJF EZ BE 16 nPanel gasket Thickness: 1 mm [.039] Part No. RJF EZ JE ROHS compliant N&B RJF Ethernet connection system for harsh environment - Industrial Ethernet RJF allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT,100 BaseTX or 1000 BaseT networks in harsh environments. With the patented RJStop(R)system you can use a standard RJ45 cordset in a metallic plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling and grounding! Main characteristics Data transmission 10 BaseT, 100 BaseTX and 1000 BaseT networks Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 Environmental protection n Sealing: IP68 n Salt spray: 48 h with nickel plating > 96 h with black coating < 500 h with olive drab cadmium n Fire retardant/Low smoke: UL94 V0 and NF F 16 101 & 16 102 n Vibrations: 10-500Hz, 10g, 3 axes: no discontinuity >10 nano s n Shocks: IK06 weight of 250 g drop from 40cm [15.75 in] onto connectors (mated pair) n Humidity: 21 days, 43C, 98% humidity n Temperature range: -40C / +85C n Storage temperature: Part number code RJF 2 2 B 03 100BTX Amphenol Applications n Robotics n Industrial process control n CNC machines n Special machines n Oil & Gas n Motion control n Data acquisition and transmission in harsh environment n Tele-maintenance n Compliant with IEC 60603-7 variante 11 n Bayonet coupling ("Audible & Visual" coupling signal ) n Robust metallic shells based on MIL-DTL-26482 H - Shell size 18 n RJ45 cordset retention in the plug: 100 N in the axis n Mating cycles: 500 min n Sealed against fluids and dust (IP68) n Shock, vibration and traction resistant n No cabling operation in field and no tools required n Mechanical coding / polarization (4 positions) nC ompatible with cable diameter from 6 mm [0.236 in] to 13 mm [0.512 in] For smaller diameters, please consult us. Shell type 6: plug, plastic gland 6M: plug, metal gland 2: square flange receptacle 2PE: square flange receptacle, IP68 backshell, plastic gland 2PEM: square flange receptacle, IP68 backshell, metal gland 7: jam nut receptacle 7PE: jam nut receptacle, IP68 backshell, plastic gland 7PEM: jam nut receptacle, IP68 backshell, metal gland Nota: also available a transversally sealed receptacle (unmated) see page 22 Back terminations (for receptacles only) 1: female RJ45 1RA: right angle female RJ45 2: RJ45 cordset Shell finishes B: black Coating - ROHS compliant N: nickel - ROHS compliant G: olive drab cadmium Nota: for N, G, BZC, and ZC, the inserts are metallized. BZC: aluminium shell - black zinc cobalt plating ZC: aluminium shell - green zinc cobalt plating - ROHS compliant Cordset length (for receptacles with "2" back termination only) - Other lengths are available on demand 03 100 BTX: 0.3m [11.81 inches] 00: 8 tinned holes at the rear of the PCB to solder the cable 05 100 BTX: 0.5m [19.68 inches] xx OPEN: open cable - with no plug at the end (xx to be replaced by the cordset length 03, 05, 10, or 15 - see nearby) 10 100 BTX: 1m [39.37 inches] 15 100 BTX: 1.5m [59.05 inches] Remark: cabling configuration 100 BTX = 568B (Ethernet specification) Examples: - Nickel plug: RJF 6 N - Black square flange receptacle, female RJ45 back termination: RJF 2 1 B - Olive drab cadmium jam nut receptacle, 1.5m [59.05"] 100 BTX cordset termination: RJF 7 2 G 15 100BTX - Black in line square flange receptacle, 30cm [11.81"] 100BTX cordset termination: RJF 2PE 2 B 03 100BTX - Nickel jam nut receptacle, solder termination: RJF 72 N 00 17 Plug n Shell type 6 with plastic or metal gland Receptacles n Square flange receptacle * 4 mounting holes: shell type 2 RJF 21 X (Straight Female RJ45) RJF 21 RA X (Right Angle Female RJ45) Panel Drilling n Jam nut receptacle * Hexagonal nut mounting: shell type 7 Amphenol RJF 71 X (straight female RJ45) RJF 71 RA X (right angle female RJ45) Panel drilling n Receptacles with IP68 backshell : shell type 2PE and 7PE with plastic or metal gland 82 [3.23] Fully Assembled 82 [3.23] Fully Assembled RJF 2PE/2PEM RJF 7PE/7PEM Back terminations Type 1 Female RJ45 18 Type 1RA Right angle female RJ45 Type 2 RJ45 cordset Type OPEN No plug at the end Type 2 - 00 Solder - 8 tinned holes AUDIBLE LOCKING Assembly instructions of the RJ Stop 1. Push down the RJ45 cordset latch, and fix it inside the insert 2. Press in and click the other part of the insert 3. Insert in the metallic housing 1 AUDIBLE LOCKING 2 AUDIBLE LOCKING 1 RJ45 PLUG 1 HALF INSULATOR 1 2 RJ45 PLUG 2 1 2 1 HALF INSULATOR RJ45 PLUG 2 HALF INSULATOR 1 1 2 STOPPER STOPPER RJ STOP(R) Patent HALF INSULATOR STOPPER RJ STOP(R) Patent STOPPER RJ STOP(R) STOPPER 1 field cabling Patent Easy and safe - No tools required for cabling HALF INSULATOR Assembling of the plug. 4 codings possibilities (defined by the customer during the assembling). STOPPER Assembling of the receptacle. IMPORTANT NOTE: to remove the insert, use the nInsert removal tool for receptacle and plug Amphenol MAIN KEY P/N: RJF ODE Accessories n Metallic cap RJFC 2 G Connector type 6: plug 2: square Flange Receptacle 7: jam Nut Receptacle Shell material & finish B: black coating - ROHS compliant N: aluminium shell - nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating e O4.45 0.25 ATOR Universal: can be used with all standard RJ45 Cat.5e cordset brands. nPanel gasket for square flange 2 thickness - 0,6 mm P/N: JE 18 19 ROHS compliant N&B RJF In line receptacles & PC tails receptacles In line receptacles O Inline receptacles allow you to make cable extensions in the field by using them with rugged RJ Field series plugs. Plating Part number Plastic gland Metallic gland Black coating - ROHS compliant RJF2PEWF1B RJF2PEMWF1B Nickel - ROHS compliant RJF2PEWF1N RJF2PEMWF1N Olive drab cadmium RJF2PEWF1G RJF2PEMWF1G PC tails receptacles These receptacles can be soldered directly on your PCB. A compound insures a transversal sealing and good performance in high vibration environments. They can be connected with rugged RJField series plugs. Amphenol compound for transversal sealing PCB Layout - solder face view Plating Part number Part number Black coating - ROHS compliant RJF 2S x 5B Nickel - ROHS compliant RJF 2S x 5N Olive drab cadmium RJF 2S x 5G x to be replaced by the letter of the coding position you need (A, B, C, or D) 20 "A" coding Panel Drilling NEW RJF ROHS compliant N&B Receptacles & plugs with 360 EMI backshell RJF series receptacles and plugs with EMI backshells provide a solution with 360 shielding: same protection than the one proposed by standard MIL-DTL-26482H connectors. With those solutions we recommend using our reinforced and double shielded Cat5E, Cat6, or Cat6A cable see pages 41-42-43. Square flange receptacle - Straight backshell Panel Drilling Part number Plating Part number Nickel - ROHS compliant Kit30439NI Olive drab cadmium Kit30439 Amphenol Kit30439 / Kit30439NI & Kit30436 / Kit30436N include: Inserts Plug - Straight backshell Part number Plating Part number Nickel - ROHS compliant Kit30394NI Olive drab cadmium Kit30394 Kit30394 & Kit30394NI include: Plug body Inserts Backshell body Band Heat shrink sleeve 21 ROHS compliant N, B & BZ RJF Transversally sealed receptacles In some applications, a transversal sealing for the receptacle is a must . This will prevent fluids and dust from going through the receptacle when plug or cap are not mated to the receptacle. The sealed solution (version "S") has a compound at the rear of the receptacle as shown on the picture. Main characteristics Applications nOutdoor equipment nAirplanes equipment nTactical radios nShelters n Rugged computers nData acquisition and transmission in harsh environments n Same as the RJF series. n A complete IP68 sealing of the receptacle (even with no plug or no protective cap mated) is added. n Outside dimensions are the same as the standard RJF series. Data transmission 10 BaseT, 100 BaseTX and 1000 BaseT networks Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 IMPORTANT NOTE Due to the compound, the coding of the connector must be done in the factory : use the codes A, B, C or D in the part number: see below. Amphenol Part number code Series RJF: MIL-DTL-26482 H bayonet RJF 7S A 2 G Shell type 2S: sealed square flange receptacle 7S: sealed jam nut receptacle Coding A,B,C,D Back terminations (for receptacles only) 1: female RJ45 1RA: right angle female RJ45 2: RJ45 Cordset Shell material & finish B: aluminium shell - black coating - ROHS compliant N: aluminium shell - nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating Nota: for N, G, BZC, and ZC plating, the inserts are metallized. BZC: aluminium shell - black zinc cobalt plating - ROHS compliant ZC: aluminium shell - green zinc cobalt plating - ROHS compliant Cordset length (For Receptacles with "2" Back Termination only) - Other lengths are available on demand 03 100 BTX: 0.3m [11.81 inches] 05 100 BTX: 0.5m [19.68 inches] 10 100 BTX: 1m [39.37 inches] 15 100 BTX: 1.5m [59.05 inches] xx OPEN: open cable - with no plug at the end (xx to be replaced by the cordset length 03, 05, 10, or 15 - see above) Remark: cabling configuration: 100 BTX = 568B (Ethernet specification) Examples: 22 - bayonet, sealed jam nut receptacle, A coding, with female RJ45 back termination, olive drab cadmium plating: RJF 7SA 1 G - bayonet, sealed square flange receptacle, A coding, with female RJ45 back termination, black plating: RJF 2SA 1 B - bayonet, sealed jam nut receptacle, A coding, 1.5m [59.05"] 100 BTX cordset, olive drab cadmium plating: RJF 7SA 2 G15 100BTX 03 100BTX ROHS compliant N, B & BZ RJF Hermetic receptacles In some applications, a transversal hermiticity for the receptacle is a must . This will prevent gas from going through the receptacle when plug or cap are not mated to the receptacle. The hermetic solution (version "H") has a compound at the rear of the receptacle as shown on the picture. Helium leakage is less than 1.10-6 cm3 per second [0.1 micron cubic ft per hour] at one bar [15 psi] pressure differential. Applications Main characteristics nOutdoor equipment nAirplanes equipment nTactical radios n Shelters n Rugged computers nData acquisition and transmission in harsh environments n Same as the RJF series. n A complete IP68 sealing of the receptacle (even with no plug or no protective cap mated) is added. n Outside dimensions are the same as the standard RJF series. Data transmission 10 BaseT, 100 BaseTX and 1000 BaseT networks Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 IMPORTANT NOTE Amphenol Due to the compound, the coding of the connector must be done in the factory: use the codes A, B, C or D in the part number: see below. Part number code Series RJF: MIL-DTL-26482 H bayonet RJF 7H A 2 G 03 100BTX Shell type 2H: transversally sealed and hermetic square flange receptacle 7H: transversally sealed and hermetic jam nut receptacle Coding A,B,C,D Back terminations (for receptacles only) 1: female RJ45 1RA: right angle female RJ45 2: RJ45 Cordset Shell material & finish B: aluminium shell - black coating - ROHS compliant N: aluminium shell - nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating Nota: for N, G, BZC, and ZC plating, the inserts are metallized. BZC: aluminium shell - black zinc cobalt plating - ROHS compliant ZC: aluminium shell - green zinc cobalt plating - ROHS compliant Cordset length (for receptacles with "2" back termination only) - Other lengths are available on demand 03 100 BTX: 0.3m [11.81 inches] 05 100 BTX: 0.5m [19.68 inches] 10 100 BTX: 1m [39.37 inches] 15 100 BTX: 1.5m [59.05 inches] xx OPEN: open cable - with no plug at the end (xx to be replaced by the cordset length 03, 05, 10, or 15 - see above) Remark: cabling configuration: 100 BTX = 568B (Ethernet specification) Examples: - bayonet, sealed jam nut receptacle, A coding, with female RJ45 Back termination, olive drab cadmium plating: RJF 7HA 1 G - bayonet, sealed square flange receptacle, A coding, with female RJ45 back termination, black plating: RJF 2HA 1 B - bayonet, sealed jam nut receptacle, A coding, 1.5m [59.05"] 100 BTX cordset, olive drab cadmium plating : RJF 7HA 2 G15 100BTX 23 NEW RJF Special plug for big insulation wire up to 1.6 mm [0.062 in] Rugged plug dedicated to cable with insulation wire from 1,1 to 1,6 mm [from 0.043 in to 0.062 in] Remark: - Solution compatible with any RJF receptacle - For cables which are not compatible with standard RJ45 plug. Main characteristics Applications n Robotics n Industrial process control n CNC machines n Special machines n Oil & Gas n Motion control nD ata acquisition and transmission in harsh environment n Tele-maintenance Data transmission 10 BaseT, 100 BaseTX and 1000 BaseT networks Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 Amphenol Plating Part number 24 n Bayonet coupling ("Audible & Visual" coupling signal ) n Robust metallic shells based on MIL-DTL-26482 H - Shell size 18 n RJ45 cordset retention in the plug: 100 N in the axis n Mating cycles: 500 min n Sealed against fluids and dust (IP68) n Shock, vibration and traction resistant n Mechanical coding / polarization (4 positions) nC ompatible with cable diameter from 6 mm [0.216 in] to 13 mm [0.512 in], for smaller diameters, please consult us Environmental protection n Sealing: IP68 n Salt Spray: 48 h with nickel plating > 96 h with black coating > 500 h with oliv drab cadmium n Fire retardant/Low smoke: UL94 V0 and NF F 16 101 & 16 102 n Vibrations: 10 - 500 Hz, 10 g, 3 axes: no discontinuity >10 nano s. n Shocks: IK06 weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair) n Humidity: 21 days, 43C, 98% humidity n Temperature range: - 40C / +85C Part number Black coating - ROHS compliant Kit39992B Nickel - ROHS compliant Kit39992NI Olive drab cadmium Kit39992G ROHS RJ Field receptacle with self closing cap compliant N&B This kit includes a receptacle and a Self Closing Cap which protects the RJ Field square flange receptacles (MIL-C-26482 type). This cap offers a protection against dust and water projections. A spring automatically closes the upper part of the cap when either the RJfield plug or RJ45 cordset are removed from the receptacle. Sealing le vel IP54 (Splash an d dust Pro of ) RJF 21 X SCC 36 [1.417] 21.9 [.862] 26.97 [1.062] 26.1 [1.028] 64.1 [2.523] RJ45 version Plating Metallized insert (EMI) Part number Part Black coating - ROHS compliant number * No RJF 21B SCC Nickel - ROHS compliant Yes RJF 21N SCC Olive drab cadmium Yes RJF 21G SCC Amphenol 26.7 [1.052] * The part number includes the receptacle + the self closing cap Remarks: * the back termination is female RJ45 * it could be used with our RJF series plug (part number RJF6xx see page 17) nNote: Panel gasket with any of these receptacles: JE18 USBF 21 x SCC, USBBF 21 x SCC, & IEEE1394 USB2.0 & 3.0 - A version (see pages 94 & 107) USB-B version (see page 118) IEEE1394 version (see page 143) 25 ROHS compliant N & BZ RJF TV Ethernet connection system for harsh environment RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments. With the patented RJStop system you can use a standard RJ45 cordset in a metallic plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling and grounding! Main characteristics Applications nD ata acquisition and transmission in harsh environment nR ailways nR adars n S helters nB attlefield communication n S ystems nN avy Data transmission 10 BaseT, 100 BaseTX and 1000 BaseT networks Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 n Sealed against fluids and dusts (IP68) n Shock, vibration and traction resistant n No cabling operation in field and no tools required n Mechanical coding / Polarization (4 positions) n Improved EMI protection nTri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device - Shell size 19 n Robust metallic shells n RJ45 cordset retention in the plug: 100 N in the axis n Mating cycles: 500 min nC ompatible with cable diameter from 6 mm [0.236 in] to 13 mm [0.512 in], for smaller diameters please consult us Environmental protection Amphenol n Sealing: IP68 n Salt spray: 48h with aluminium shell - Nickel, & black zinc cobalt plating > 500h with aluminium shell - Olive drab cadmium plating 500 h with marine bronze shell n Fire retardant/Low smoke : UL94 V0 and NF F 16 101 & 16 102 n Vibrations : 10 - 500 Hz, 10 g, 3 axes: no discontinuity > 10 nano s. n Compounded versions tested per NAS 1599 (5-3000 Hz, 20g, 12h) n Shocks: IK06 weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair) n Humidity: 21 days, 43C, 98% humidity n Temperature range: -40C / +85C Part number code RJF TV 2 2 G 03 100 BTX Shell type 6: plug with plastic gland 6M: plug with metal gland 2: square flange receptacle 2PE: square flange receptacle, IP68 backshell, plastic gland 2PEM: square flange receptacle, IP68 backshell, metal gland 7: jam nut receptacle 7PE: jam nut receptacle, IP68 backshell, plastic gland 7PEM: jam nut receptacle, IP68 backshell, metal gland Nota: also available a transversally sealed receptacle (unmated) See page 36 Back terminations (receptacles only) 1: female RJ45 1RA: right angle female RJ45 2: RJ45 Cordset Shells material & Finish (inserts are metallized) N: aluminium shell - nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating BZ: marine bronze shell - ROHS compliant BZC: aluminium shell - black zinc cobalt plating ZC: aluminium shell - green zinc cobalt plating - ROHS compliant ZN: aluminium shell - black zinc nickel plating - ROHS compliant Cordset length (type 2 back termination only) - Other lengths are available on demand 03 100 BTX: 0.3m [11.81 inches] 00: 8 tinned holes at the rear of the PCB to solder the cable 05 100 BTX: 0.5m [19.68 inches] xx OPEN: open cable - with no plug at the end (xx to be replaced by the cordset length 03, 05, 10, or 15 - see nearby) 10 100 BTX: 1m [39.37 inches] 15 100 BTX: 1.5m [59.05 inches] Remark: cabling configuration 100 BTX = 568B (Ethernet specification) Examples: 26 - Olive crab cadmium plug with plastic gland: RJF TV 6G - Olive drab cadmium jam nut receptacle, female RJ45 back termination: RJF TV 71G - Nickel jam nut receptacle, 1,5 m 100 BTX cordset back termination: RJF TV 72N 15 100BTX - Olive drab cadmium in line square flange recept., 0,3 m 100 BTX cordset back termination: RJF TV 2PE 2 G 03 100BTX - Nickel jam nut receptacle solder termination 8 tinned holes: RJF TV 22 N 00 Plug n Shell type 6 with plastic or metal gland RJF TV 6 X Receptacles n Square flange receptacle - 4 mounting holes: shell type 2 Panel Drilling RJFTV 21 X (straight female RJ45) RJFTV 21 RA X (right angle female RJ45) n Jam nut receptacle - Hexagonal nut mounting: shell type 7 Amphenol Panel drilling RJFTV 71 X (straight female RJ45) RJFTV 71 RA X (right angle female RJ45) n Receptacles with IP68 backshell: Shell type 2PE and 7PE with plastic or metal gland 92 [3.622] [3.622] 92 RJF TV 2PE/2PEM/7PE/7PEM Back terminations Type 1 Female RJ45 Type 1RA Right angle female RJ45 Type 2 RJ45 cordset Type OPEN No plug at the end Type 2 - 00 Solder - 8 tinned holes 27 Assembly instructions Insert codings Assembling of the plug. ASSEMBLY + CODING CLIC ! 4 codings possibilities (defined by the customer during the assembling). Coding A CLIC ! Coding B Coding C Coding D Plug Main key Receptacle INSERTS CODING Connection side view Assembling of the receptacle. CLIC ! IMPORTANT NOTE: to remove the insert, use the nInsert removal tool for receptacle and plug P/N: RJF ODE ASSEMBLY + CODING INSERTS CODING Connection side view Amphenol Accessories n Metallic caps RJFTVC 2 Shell material & finish N: aluminium shell - nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating BZ: marine bronze shell - ROHS compliant ZC: aluminium shell - green zinc cobalt plating - ROHS compliant ZN: aluminium shell - black zinc nickel plating - ROHS compliant nPanel gasket for square flange receptacle Thickness: 0,8 mm [.031]): P/n: JE19 28 G Connector type 6: plug 2: square flange receptacle 7: jam nut receptacle Plug Cap Receptacle Cap Metallic self closing cap (SCC) For RJFTV square flange receptacles. This self closing cap automatically protects the RJF TV square flange receptacle (MIL-DTL-38999 type), protecting your system from dust and water projection. A spring automatically closes the upper part of the cap when the RJF TV plug is removed from the receptacle. 48,7 29,4 O 31,5 49,5 29,4 4- O 3,2 [ 0,128 ] 28,1 IMPORTANT NOTE Metal self closing cap are sold separately (without receptacle). Green Nickel Plating Part number Black Sealing level IP67 Amphenol 39 Part number Black coating - ROHS compliant RJF TV SCC B Nickel - ROHS compliant RJF TV SCC N Olive drab cadmium RJFTV SCC G Remark: compatible with RJFTV square flange receptacle type RJFTV2xxx only (see page 26). 29 RJF TV Receptacles & plugs with 360 EMI backshells RJFTV series receptacles and plugs with EMI backshells provide a solution with 360 shielding: same protection than the one proposed by standard MIL-DTL-38999 series III connectors. With those solutions we recommend using our reinforced and double shielded Cat5E, Cat6, or Ca6A cable. see pages 41-42-43 Square flange receptacle - Straight backshell Square flange receptacle - Right angle backshell Panel Drilling Plating Part number P/N Plating Nickel - ROHS compliant Kit38082NI Olive drab cadmium Kit38082 Green zinc cobalt - ROHS compliant Kit38082ZC Black zinc cobalt - ROHS compliant Kit38082BZC Nickel - ROHS compliant Part Olive drab cadmium number Amphenol Kit38082 and Kit40791 include: Kit40791NI Kit40791 Green zinc cobalt - ROHS compliant Kit40791ZC Black zinc cobalt - ROHS compliant Kit40791BZC nPanel gasket for square flange receptacle (thickness: 0,8 mm [.031]) Heat shrink sleeve Rj45 receptacle Receptacle body P/N Backshell body P/n: JE19 Band 2 metallized inserts Jam nut receptacle - Straight backshell Jam nut receptacle - Right angle backshell Panel drilling Plating Nickel - ROHS compliant Part Olive drab cadmium number 30 P/N Kit38204NI Kit38204 Green zinc cobalt - ROHS compliant Kit38204ZC Black zinc cobalt - ROHS compliant Kit38204BZC Plating Nickel - ROHS compliant Part Olive drab cadmium number P/N Kit40771NI Kit40771 Green zinc cobalt - ROHS compliant Kit40771ZC Black zinc cobalt - ROHS compliant Kit40771BZC Kit38204 and Kit40771 include: IMPORTANT NOTE Heat shrink sleeve Receptacle body WIRE POSITION TO BE DEFINED BY CUSTOMER ACCORDING TO NETWORK Backshell body Rj45 receptacle Band Plug - Straight backshell Plug - Right angle backshell Plating Part number With these receptacles, you will have to solder your own cable on the PCB. So the wire positions have to be defined according to your network. Plating P/N Nickel - ROHS compliant Kit38081NI Olive drab cadmium Kit38081 Green zinc cobalt - ROHS compliant Kit38081ZC Black zinc cobalt - ROHS compliant Kit38081BZC Nickel - ROHS compliant Part Olive drab cadmium number P/N Kit40792NI Kit40792 Green zinc cobalt - ROHS compliant Kit40792ZC Black zinc cobalt - ROHS compliant Kit40792BZC Plug body Inserts Backshell body Band Heat shrink sleeve Amphenol Kit38081 and Kit40792 include: IMPORTANT NOTE With these plugs, the standard RJ45 plug is not provided. Customer will have to crimp a standard RJ45 on the cable by himself. Remark: we advise using our double shielded, reinforced Cat5E, Cat6, or Cat6A cables (see pages 41-42-43) with these RJFTV series EMI connectors. If customer wants to use his own cable, please check with us regarding compatibility with our backshells: contact@rjfield.com. We also provide assembled cordsets (see examples below). For this type of solution please provide the configuration needed: length, description of second end... Example of assembled cordset: Grounding FINGERS (BAND-IT) 31 ROHS compliant N RJF TV Through bulkhead receptacles Our RJFTV through bulkhead receptacles can be connected on each side with rugged RJFTV plugs. This system allows mechanical protection and a sealing (IP68 when mated) inside and outside the equipement, and keeps the flexibility offered by panel mount and plug connectors. They can be connected with RJFTV series plugs. Square flange receptacle Plating Part number Metallized insert For coding A Nickel - ROHS compliant No RJF TV B 2 N ISO BRUT * Nickel - ROHS compliant Yes RJF TV B 2 N ISO NI * Olive drab cadmium No RJF TV B 2 G ISO BRUT * Olive drab cadmium Yes RJF TV B 2 G ISO NI * Amphenol * ISO BRUT = non conductive insert ISO NI = conductive insert IMPORTANT NOTE Possibility of other codings - Please consult us Jam nut receptacle Plating Part number Part number Nickel - ROHS compliant No RJF TV B 7 N ISO BRUT * Nickel - ROHS compliant Yes RJF TV B 7 N ISO NI * Olive drab cadmium No RJF TV B 7 G ISO BRUT * Olive drab cadmium Yes RJF TV B 7 G ISO NI * * ISO BRUT = non conductive insert ISO NI = conductive insert 32 Metallized insert ROHS compliant RJF TV Stand off receptacles These receptacles can be sold directly to your PCB. A compound insures a transversal sealing and good performance in high-vibration environments. The shell of those receptacles are in the "Stand Off" style. They can be connected with RJFTV series plugs. Square flange receptacle Olive drab cadmium Part number RJF TV 2S x 5N F459 Coding A RJF TV 2S x 5G F459 * new p/n - before it was RJFTV25GF459 or RJFTV25NF459 x to be replaced by the letter of the coding position you need (A, B, C, or D) Coding B Plug Main key Coding C Coding D Amphenol Plating available Part number * Nickel - ROHS compliant Receptacle PCB Layout Panel drilling 3. 24 Solder face view 33 W NE Now available with same distance between flange and PCB than the 38999 stand off one. So you can use a 38999 stand off and a RJ45 stand off in the same implementation. Part number: 36542 Plating: olive drab cadmium Amphenol Jam nut receptacle Part number Plating Part number Nickel - ROHS compliant RJF TV 7S x 5N F459 Olive drab cadmium RJF TV 7S x 5G F459 x to be replaced by the letter of the coding position you need (A, B, C, or D) Coding A Plug Main key Receptacle 34 Coding B Coding C Coding D PCB Layout Solder side view Panel Drilling Now available with same distance between flange and PCB than the 38999 stand off one. So you can use a 38999 stand off and a RJ45 stand off in the same implementation. Part number: 36540 Jam nut receptacle, olive drab cadmium plating. Amphenol W NE PCB Layout Solder side view 35 ROHS compliant N, B & BZ RJF TV Transversally sealed receptacles In some applications, a transversal sealing for the receptacle is a must . This will prevent fluids and dust from going through the receptacle when plug or cap are not mated to the receptacle. The sealed solution (version "S") has a compound at the rear of the receptacle as shown on the picture. The Sealed RJF TV has been successfully tested in very high vibration corresponding to airplane applications. Applications Main characteristics nOutdoor equipment nAirplanes equipment nTactical radios nShelters n Rugged computers nData acquisition and transmission in harsh environments n Same as the RJF TV series. n A complete IP68 sealing of the receptacle (even with no plug or no protective cap mated) is added. n Outside dimensions are the same as the standard RJF TV series. n Vibrations: the compounded versions of the RJF TV have been tested in vibration following the NAS 1599 Aeronautic specification (Ambient temperature): 5 - 3000 Hz, 20g, 2,5 mm [.1 inch] double amplitude, 3 axes, 12 hours Note: this specification exceeds MIL-C-26500 requirements. Data transmission 10 BaseT, 100 BaseTX and 1000 BaseT networks Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 IMPORTANT NOTE Due to the compound, the coding of the connector must be done in the factory : use the codes A, B, C or D in the part number: see below. Amphenol Main key Coding A Coding B Coding C Coding D Receptacle Example : RJFTV 2S A2 G 15 100BTX Part number code Series RJFTV: MIL-DTL-38999 Series III RJF TV 7S A 2 G Shell type 2S: sealed square flange receptacle 7S: sealed jam nut receptacle Coding A,B,C,D Back terminations (for receptacles only) 1: female RJ45 1RA: right angle female RJ45 2: RJ45 Cordset Shell material & finish N: aluminium shell - nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating BZ: marine bronze shell - ROHS compliant Nota: receptacle inserts are metallized BZC: aluminium shell - black zinc cobalt plating - ROHS compliant ZC: aluminium shell - green zinc cobalt plating - ROHS compliant ZN: aluminium shell - black zinc nickel plating - ROHS compliant Cordset length (For Receptacles with "2" Back Termination only) - Other lengths are available on demand 03 100 BTX: 0.3m [11.81 inches] 05 100 BTX: 0.5m [19.68 inches] 10 100 BTX: 1m [39.37 inches] 15 100 BTX: 1.5m [59.05 inches] xx OPEN: open cable - with no plug at the end (xx to be replaced by the cordset length 03, 05, 10, or 15 - see above) Remark: cabling configuration: 100 BTX = 568B (Ethernet specification) Examples: 36 - series III, sealed jam nut receptacle, A coding, with female RJ45 back termination, olive drab cadmium plating: RJF TV 7SA 1 G - series III, sealed jam nut receptacle, A coding, 1.5m [59.05"] 100 BTX cordset, olive drab cadmium plating: RJF TV 7SA 2 G15 100BTX 03 100BTX ROHS compliant N, B & BZ RJF TV Hermetic receptacles In some applications, a transversal hermiticity for the receptacle is a must . This will prevent gas from going through the receptacle when plug or cap are not mated to the receptacle. The hermetic solution (version "H") has a compound at the rear of the receptacle as shown on the picture. Helium leakage is less than 1.10-6 cm3 per second [0.1 micron cubic ft per hour] at one bar [15 psi] pressure differential. Applications Main characteristics nOutdoor equipment nAirplanes equipment nTactical radios n Shelters n Rugged computers nData acquisition and transmission in harsh environments n Same as the RJF TV series. n A complete IP68 sealing of the receptacle (even with no plug or no protective cap mated) is added. n Outside dimensions are the same as the standard RJF TV series. n Vibrations: the compounded versions of the RJF TV have been tested in vibration following the NAS 1599 Aeronautic specification (Ambient temperature): 5 - 3000 Hz, 20g, 2,5 mm [.1 inch] double amplitude, 3 axes, 12 hours Note: this specification exceeds MIL-C-26500 requirements. Data transmission 10 BaseT, 100 BaseTX and 1000 BaseT networks Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 IMPORTANT NOTE Main key Coding A Coding B Coding C Amphenol Due to the compound, the coding of the connector must be done in the factory: use the codes A, B, C or D in the part number: see below. Coding D Receptacle Example : RJFTV 2H A2 N 15 100BTX Part number code Series RJFTV: MIL-DTL-38999 series III RJF TV 7H A 2 G 03 100BTX Shell type 2H: transversally sealed and hermetic square flange receptacle 7H: transversally sealed and hermetic jam nut receptacle Coding A,B,C,D Back terminations (for receptacles only) 1: female RJ45 1RA: right angle female RJ45 2: RJ45 Cordset Shell material & finish N: aluminium shell - nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating BZ: marine bronze shell - ROHS compliant Nota: receptacle inserts are metallized BZC: aluminium shell - black zinc cobalt plating - ROHS compliant ZC: aluminium shell - green zinc cobalt plating - ROHS compliant ZN: aluminium shell - black zinc nickel plating - ROHS compliant Cordset length (for receptacles with "2" back termination only) - Other lengths are available on demand 03 100 BTX: 0.3m [11.81 inches] 05 100 BTX: 0.5m [19.68 inches] 10 100 BTX: 1m [39.37 inches] 15 100 BTX: 1.5m [59.05 inches] xx OPEN: open cable - with no plug at the end (xx to be replaced by the cordset length 03, 05, 10, or 15 - see above) Remark: cabling configuration: 100 BTX = 568B (Ethernet specification) Examples: - Series III, sealed jam nut receptacle, A coding, with female RJ45 Back termination, olive drab cadmium plating: RJF TV 7HA 1 G - Series III, sealed jam nut receptacle, A coding, 1.5m [59.05"] 100 BTX cordset, olive drab cadmium plating : RJF TV 7HA 2 G15 100BTX 37 NEW RJF TV Special plug for big insulation wire up to 1.6 mm. Special RJF TV plug dedicated to Ethernet cable with insulation wire from 1,1 to 1,6 mm. Remark: - compatible with any RJF TV receptacle - for cables which are not compatible with standard RJ45 plug Main characteristics Applications n Robotics n Industrial process control n CNC machines n Special machines n Oil & Gas n Motion control nD ata acquisition and transmission in harsh environment n Tele-maintenance Amphenol Data transmission 10 BaseT, 100 BaseTX and 1000 BaseT networks Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 n Sealed against fluids and dusts (IP68) n Shock, vibration and traction resistant n No cabling operation in field and no tools required n Mechanical coding / Polarization (4 positions) n Improved EMI protection nTri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device - Shell size 19 n Robust metallic shells n RJ45 cordset retention in the plug: 100 N in the axis n Mating cycles: 500 min nC ompatible with cable diameter from 6 mm [0.236 in] to 13 mm [0.512 in], for smaller diameters please consult us Environmental protection n Sealing: IP68 n Salt spray: 48 h with nickel plating > 96 h with black coating > 500 h with olive drab cadmium n Fire retardant/Low smoke: UL94 V0 and NF F 16 101 & 16 102 n Vibrations: 10 - 500 Hz, 10 g, 3 axes: no discontinuity > 10 nano s. n Shocks: IK06 weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair) n Humidity: 21 days, 43C, 98% humidity n Temperature range: - 40C / +85C SPECIAL RJ45 PLUG FOR ISOLATION WIRE UP TO 1,6 MM 56 [2.2] 41 [1.61] Part number 38 Plating P/N Nickel - ROHS compliant 35660 Olive drab cadmium 35660G NEW RJ45/M12 adaptor RJ45/M12 adaptors allow to give an access point with RJ45 on M12 D coded based networks. Especially used in Railway applications. Amphenol Part number : 35655 Nickel plating. M12-D RJ45 contact position 1 1 2 3 3 2 4 6 39 NEW Special RJ45 adaptor For Military & Commercial Aeronautics At the rear of the adaptor, the connection is for connectors type EN3646. Adaptor RJ45 only Coding Part number 35629 N 35632 Y Adaptor RJ45 + Self Closing Cap Amphenol Part number Coding 35630 N 35631 Y 4 HOLES For all options: Panel Drilling Coding N 40 12-10 Male contact EN3155 Coding Y ROHS compliant CAT 5E CABLE High reliability Cat 5e Ethernet cable & cordsets General construction A 4 pair, 24 AWG, 100 Ohm SFTP round patch cable, designed to the ISO / IEC 11801 Category 5e requirements (cat 5e on 76m). The cable contains 4 twisted pairs, cabled, double shielded with kevlar reinforcement strands, jacketed in black UV resistant Polyurethane HFFR. Designed for fixed or portable applications in harsh environments. HFFR: Halogen Free Flame Retardant Jacket compound specification: r Datas fo only n le alo e the cab RJ45 plug) t (withou Physical characteristics CONDUCTORS 24 AWG (0,25 mm) tinned copper, 7x0.20 mm INSULATION Color coded 568-B, linear low Density Polyethylene, Nom. Dia. 0,039" (1mm) ASSEMBLY Pairs cabled with Kevlar strength members and separation tape wrapped SHIELDS Inner: a luminium mylar 100% coverage Outer: t inned copper braid 80% coverage JACKET Black, special PUR compound WEIGHT 40 lbs / mft (59 kg/km) OUTSIDE DIAM. 0.28" (7.1 mm) nom. MIN BEND RADIUS (During installation) 67.5mm (9x O. D.) MIN BEND RADIUS (During operation) 37.5mm (5 x O.D.) MIN FLEXES TO FAILURE Passes IEC 61156-6 requirements TEMPERATURE Plus 85C, minus 40C Length (m/ft) 0,76 m / 2,5 ft 1,00 m / 3.28 ft 1,52 m / 5 ft 3,05 m / 10 ft 4,57 m / 15 ft 5,00 m / 16.4 ft 6,00 m / 19.68 ft 6,24 m / 20.46 ft 7,62 m / 25 ft 8,00 m / 26.24 ft 10,00 m / 32.78 ft 14,00 m / 45.92 ft 15,25 m / 50 ft 22,87 m / 75 ft 30,5 m / 100 ft 45,75 m / 150 ft 50,00 m / 164 ft 61,00 m / 200.08 ft Electrical characteristics (at 20C - 68F) DC Resistance 96 Ohms/Km Impedance (1-100 MHz) 100 +/- 15 Ohms Insertion loss (dB/100m) N.E.X.T. (Near-End Crosstalk Loss) 772 KHz 2.70 dB 64 dB min. 1 MHz 3.15 dB 62 dB min. 4 MHz 6.45 dB 53 dB min. 10 MHz 9.90 dB 47 dB min. 16 MHz 12.3 dB 44 dB min. 20 MHz 13.8 dB 42 dB min. 31.25 MHz 17.7 dB 40 dB min. 62.5 MHz 25.6 dB 35 dB min. 100 MHz 33 dB 32 dB min. Frequency Capacitance (1 kHz) LCL Part number RJF SFTP 5E 0076 RJF SFTP 5E 0100 RJF SFTP 5E 0152 RJF SFTP 5E 0305 RJF SFTP 5E 0457 RJF SFTP 5E 0500 RJF SFTP 5E 0600 RJF SFTP 5E 0624 RJF SFTP 5E 0762 RJF SFTP 5E 0800 RJF SFTP 5E 1000 RJF SFTP 5E 1400 RJF SFTP 5E 1525 RJF SFTP 5E 2287 RJF SFTP 5E 3050 RJF SFTP 5E 4575 RJF SFTP 5E 5000 RJF SFTP 5E 6100 46nF/km nom. Insulation resistance 43 dB min. @ 64 KHz 3.4 pF/m max. @ 1KHz (wire to ground) 150 M Ohm min. Voltage rating 230 VMS Dielectric strength VAC/1 min - 700 V/Min Propagation delay (100 MHz) 5.2 ns/m max. 20 ns/100m max. @ 1-100 MHz 3% max. Capacitance unbalance Cordsets with a RJ45 plug overmolded on each end - Glossy finish - UV resistant - High flexibility Delay skew Resistance unbalance Structural return loss (1-20 MHz) Spark test (tested during production) Velocity of propagation Amphenol Applications n Robotics n Motion control n Railways nCNC machines nBattelfield communication n Industrial process control - Halogen free flame retardant polyether-based polyurethane - Excellent hydrolysis resistance - High microbial resistance 23db/100m min. 3 KV 67% nom. Reel of cable (without RJ45 plug on ends) Length (m / ft) Part number 100 m / ~328 ft 190-038045-00 300 m / ~984 ft 190-038045-01 41 ROHS NEW CAT 6 CABLE compliant High reliability Cat 6 Ethernet cable & cordsets General construction A 4 pairs, 26 AWG, 100 Ohm SFTP round patch cable, designed to the ISO / IEC 11801 Category 6 requirements. The cable contains 4 twisted pairs individually shielded, cabled, double shielded with kevlar reinforcement strands, jacketed in black UV resistant Polyurethane HFFR. Designed for fixed or portable applications in harsh environments. HFFR: Halogen Free Flame Retardant Jacket compound specification: - Halogen free flame retardant polyether-based polyurethane - Excellent hydrolysis resistance - High microbial resistance - Glossy finish - UV resistant - High flexibility Datas for th e cable alone only (without RJ4 5 plug) Applications n Robotics nCNC machines Physical characteristics n Motion control nBattlefield communication Conductors 26 AWG (0,14 mm) tinned copper n Railways n Industrial process control Insulation Polyethylene Nom. Dia. 0,039" (1mm) Assembly Pairs cabled with Kevlar strength members and separation tape wrapped Shields Inner: aluminium mylar 100% coverage Outer: t inned copper braid 80% coverage Jacket Black, special PUR compound Electrical characteristics (at 20C - 68F) DC Resistance 290 Ohm/Km Impedance (100 MHz) 100 +/- 5 Ohm Insertion loss (dB/100m) N.E.X.T. (Near-End Crosstalk Loss) Weight 36.9 lbs / mft (55 kg/km) 1 MHz 3.1 dB 75.3 dB min. Outside diam. 0.272" (6.9 mm) nom. 4 MHz 5.8 dB 66.3 dB min. 8 MHz 8.0 dB 61.8 dB min. 72mm (10x O. D.) 10 MHz 9.0 dB 60.3 dB min. Min bend radius (During installation) 16 MHz 11.4 dB 57.2 dB min. 36mm (5 x O.D.) 20 MHz 12.8 dB 55.8 dB min. MIn bend radius (During operation) 25 MHz 14.1 dB 54.3 dB min. Min flexes to failure Passes IEC 61156-6 requirements 31.25 MHz 16.1 dB 52.8 dB min. Temperature -40C (-40F) / + 85C (185F) 62.5 MHz 23.2 dB 48.4 dB min. 100 MHz 29.9 dB 45.3 dB min. 200 MHz 43.7 dB 40.8 dB min. 250 MHz 49.7 dB 39.3 dB min. Frequency Amphenol Capacitance (1 kHz) 50nF/km nom. Capacitance unbalance 1600 pF/km max. Insulation resistance 5 GOhm/km Voltage rating (peak) 230 V Dielectric strength VAC/1 min - 700 V/Min Propagation delay 4.6 ns/m Skew 45 ns/100m Resistance unbalance 2% Return loss (250 MHz) 15.6dB Velocity of propagation 72% nom. Reel of cable (without RJ45 plug on ends) 42 Length (m / ft) Part number 100 m / ~328 ft 191-031179-00 300 m / ~984 ft 191-031179-01 Cordsets with a RJ45 plug overmolded on each end Length (m/ft) 0,75 m / 2,46 ft 1,00 m / 3,28 ft 1,50 m / 4,92 ft 2,00 m / 6,56 ft 2,50 m / 8,20 ft 3,00 m / 9,84 ft 3,50 m / 11,48 ft 4,00 m / 13,12 ft 4,50 m / 14,76 ft 5,00 m / 16,40 ft 6,00 m / 19,68 ft 7,00 m / 22,96ft 8,00 m / 26,24 ft 9,00 m / 29,52 ft 10,00 m / 32,80 ft 15,00 m / 49,20 ft 20,00 m / 65,60 ft 25,00 m / 82,00 ft 30,00 m / 98,40 ft 35,00 m / 114,80 ft 40,00 m / 131,20 ft 45,00 m / 147,60 ft 50,00 m / 164,00 ft 60,00 m / 196,80 ft Part number RJF SFTP 6 0075 RJF SFTP 6 0100 RJF SFTP 6 0150 RJF SFTP 6 0200 RJF SFTP 6 0250 RJF SFTP 6 0300 RJF SFTP 6 0350 RJF SFTP 6 0400 RJF SFTP 6 0450 RJF SFTP 6 0500 RJF SFTP 6 0600 RJF SFTP 6 0700 RJF SFTP 6 0800 RJF SFTP 6 0900 RJF SFTP 6 1000 RJF SFTP 6 1500 RJF SFTP 6 2000 RJF SFTP 6 2500 RJF SFTP 6 3000 RJF SFTP 6 3500 RJF SFTP 6 4000 RJF SFTP 6 4500 RJF SFTP 6 5000 RJF SFTP 6 6000 NEW CAT 6A CABLE ROHS compliant High reliability Cat 6A Ethernet cable & cordsets General construction A 4 pairs, 26 AWG, 100 Ohm SFTP round patch cable, designed to the ISO / IEC 11801 Category 6A requirements. The cable contains 4 twisted pairs individually shielded, cabled, double shielded with kevlar reinforcement strands, jacketed in black UV resistant Polyurethane HFFR. Designed for fixed or portable applications in harsh environments. HFFR: Halogen Free Flame Retardant Jacket compound specification: - Halogen free flame retardant polyether-based polyurethane - Excellent hydrolysis resistance - High microbial resistance Applications - Glossy finish - UV resistant - High flexibility n Robotics r Datas fo only e n lo a le the cab RJ45 plug) t (withou Conductors 26 AWG (0,14 mm) tinned copper Insulation Density Polyethylene, Nom. Dia. 0,039" (1mm) Assembly Pairs cabled with Kevlar strength members and separation tape wrapped Shields Inner: aluminium mylar 100% coverage Outer: tinned copper braid 80% coverage Electrical characteristics (at 20C - 68F) Jacket Black, special PUR compound DC Resistance Impedance (100 MHz) Weight 36.9 lbs / mft (55 kg/km) Outside diam. 0.272" (6.9 mm) nom. Min bend radius (During installation) 72mm (10x O. D.) MIn bend radius (During operation) 36mm (5 x O.D.) Min flexes to failure Passes IEC 61156-6 requirements Temperature -40C (-40F) / + 85C (185F) n Motion control n Railways nCNC machines nBattlefield communication n Industrial process control Frequency 1 MHz 4 MHz 8 MHz 10 MHz 16 MHz 20 MHz 25 MHz 31.25 MHz 62.5 MHz 100 MHz 200 MHz 250 MHz 300 MHz 400 MHz 500 MHz Insertion loss (dB/100m) 3.1 dB 5.7 dB 8.0 dB 8.9 dB 11.2 dB 12.6 dB 14.1 dB 15.8 dB 22.5 dB 28.7 dB 41.4 dB 46.6 dB 51.4 dB 60.1 dB 67.9 dB Capacitance (1 kHz) Capacitance unbalance Insulation resistance Voltage rating (peak) Dielectric strength Propagation delay Skew Resistance unbalance Return loss (500 MHz) Velocity of propagation 290 Ohm/Km 100 +/- 5 Ohm N.E.X.T. (Near-End Crosstalk Loss) 75.3 dB min. 66.3 dB min. 61.8 dB min. 60.3 dB min. 57.2 dB min. 55.8 dB min. 54.3 dB min. 52.8 dB min. 48.4 dB min. 45.3 dB min. 40.8 dB min. 39.3 dB min. 38.1 dB min. 36.3 dB min. 34.8 dB min. 50nF/km nom. 1600 pF/km max. 5 GOhm/km 230 V VAC/1 min - 700 V/Min 4.6 ns/m 45 ns/100m 2% 15.6dB 72% nom. Reel of cable (without RJ45 plug on ends) Length (m / ft) Part number 100 m / ~328 ft 191-031190-00 300 m / ~984 ft 191-031190-01 Amphenol Physical characteristics Cordsets with a RJ45 plug overmolded on each end Length (m/ft) 0,75 m / 2,46 ft 1,00 m / 3,28 ft 1,50 m / 4,92 ft 2,00 m / 6,56 ft 2,50 m / 8,20 ft 3,00 m / 9,84 ft 3,50 m / 11,48 ft 4,00 m / 13,12 ft 4,50 m / 14,76 ft 5,00 m / 16,40 ft 6,00 m / 19,68 ft 7,00 m / 22,96ft 8,00 m / 26,24 ft 9,00 m / 29,52 ft 10,00 m / 32,80 ft 15,00 m / 49,20 ft 20,00 m / 65,60 ft 25,00 m / 82,00 ft 30,00 m / 98,40 ft 35,00 m / 114,80 ft 40,00 m / 131,20 ft 45,00 m / 147,60 ft 50,00 m / 164,00 ft 60,00 m / 196,80 ft Part number RJF SFTP 6A 0075 RJF SFTP 6A 0100 RJF SFTP 6A 0150 RJF SFTP 6A 0200 RJF SFTP 6A 0250 RJF SFTP 6A 0300 RJF SFTP 6A 0350 RJF SFTP 6A 0400 RJF SFTP 6A 0450 RJF SFTP 6A 0500 RJF SFTP 6A 0600 RJF SFTP 6A 0700 RJF SFTP 6A 0800 RJF SFTP 6A 0900 RJF SFTP 6A 1000 RJF SFTP 6A 1500 RJF SFTP 6A 2000 RJF SFTP 6A 2500 RJF SFTP 6A 3000 RJF SFTP 6A 3500 RJF SFTP 6A 4000 RJF SFTP 6A 4500 RJF SFTP 6A 5000 RJF SFTP 6A 6000 43 NOTES .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. Amphenol .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. 44 Rugged Ethernet Solutions Amphenol Cable assemblies table of contents NEW RJ45/M12: Ethernet railway cable solution .................................................................................................................................................................. NEW JUMPER railway intercoach ......................................................................................................................................................................... 46 47 45 NEW RJ45/M12: Ethernet railway cable solution Part number: Kit 36516 - Length 7 m [22.96 ft] Part number: Kit 36520 - Length 1 m [3.28 ft] Amphenol M12 D Coding Part number: Kit 36530 - Length 4 m [13.12 ft] For all options: 46 NEW JUMPER railway intercoach ROHS compliant N Derived from RJFTV Series Note: for technical characteristics, please refer to RJFTV page 26. Kit 40426 includes: - 2 RJF TV plugs with EMI backshell assembled (coding A) - 1 RJF SFTP cable cat 5E high reliability - 1 conduit PCST-17B - 2 PMAFIX straight, PG metal thread Part number L +100 0 P/N 2465 Kit 40426 Rep 101 3010 Kit 40426 Rep 102 Amphenol For any other lenght, please consult us: contact@rjfield.com 47 NOTES .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. Amphenol .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. 48 Rugged Ethernet solutions Amphenol Rugged electronics table of contents Military Ethernet media converter for harsh environment, fully MIL-STD compliant NEW RES-GMC with Expanded Beam technology: military Ethernet media converter - 2 Gigabit ports ............................................................ RES-GMC with butt joint fiber connector: military Ethernet media converter - 2 or 4 Gigabit ports ......................................................... RES-GMC-1M-FORC: military Ethernet media converter with remote control .................................................................................................... NEW 50 52 54 Military Ethernet switch for harsh environment, fully MIL-STD compliant RES-SCE-AC-8US: unmanaged miniature portable Ethernet switch - 8 fast ports ............................................................................................. RES-SCE-8MG: managed miniature portable Ethernet switch - 8 Gigabit ports ................................................................................................. RESMLAC-8US-CAPS: unmanaged military Ethernet switch, MIL-DTL-38999 connectors - 8 fast ports .................................................... RJSMLAC-8UG-CAPS: unmanaged military Ethernet switch, RJFTV connectors - 8 Gigabit ports ............................................................... RJSMLAC-8MG-CAPS: managed military Ethernet switch, RJFTV connectors - 8 Gigabit ports ................................................................... RESMLAC-8MG-CAPS: managed military Ethernet switch, MIL-DTL-38999 connectors - 8 Gigabit ports ................................................. RESMLAC-8MG-CAPS F35: managed military Ethernet switch, MIL-DTL-38999 connectors - 8 Gigabit ports ........................................ RESMLAC-28MG: managed military Ethernet switch - 24 Gigabit + 4 combo 10G ports ................................................................................ 56 58 60 62 64 66 68 70 Military Ethernet switch for harsh environment with industrial EMI compliancy RJSML-8US1 and RJSML-8UG1: unmanaged military Ethernet switch, fast or Gigabit ................................................................................... RJSML-MG7F3G : managed military Ethernet switch - 7 fast ports + 3 Gigabit ports ...................................................................................... 73 77 Industrial Ethernet switch for harsh environment RJSPC: unmanaged or ring industrial Ethernet switch - 5 fast ports .................................................................................................................... 81 49 RES-GMC with Expanded Beam technology Military Ethernet media converter NEW For harsh environment - Fully MIL-STD compliant Amphenol's RES-GMC is a MIL-STD rugged, unmanaged-military-grade security gateway, offering up to 2 Gigabit security gateways per device for unidirectional and data diodes solution for total isolation between two network with different security classification. The unit supports PoE on 2 ports (IEEE802.3af and IEEE802.3at). Developed for military and harsh environment applications, the RES-GMC features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling, and interface through sealed MIL-D-38999 circular connectors. Leveraging best-in-class switching technology, the RES-GMC series serves as a robust solution to extend your Tactical Gigabit Ethernet network connectivity of up to 120Km over fiber. Compact in size, the RES-GMC is particularly useful for remote and space-constrained locations either on ground vehicle environments or airborne. Military applications n Data acquisition & transmission nBattlefield communication C4ISR n Rugged Networks nCombat vehicles nAvionic & shipboard systems Amphenol Key features n Ethernet ports n 10/100/1000 Base TX to 100/1000 Base FX-(MM/SM) Media converter (WDM - Optional) n Up to 2 x 10/100/1000Base-TX and up to 2 x 100/1000 Base FX n Networking n Full wire-speed forwarding rate n Option for Up to 2 ports PoE - IEEE802.3af, IEEE802.3at n Store-and-forward or Pass through mechanism n Auto MDI-II, MDI-X, FDX, HDX, Flow control n Auto-negotiation and fixed settings via DIP switch n Jumbo frame support n Link loss forwarding mechanism n Connectors n MIL-D-38999 (Power & Ethernet signals) n Power connector type: D38999/24WA98PA n LAN connector type: RJFTV n Fiber connector type: CTOS 77 PC or TAC BEAM EB 4H 8000 n Protective cap over each connector n Chassis n Low profile rugged aluminium extrusion n Conductively cooled w/custom internal heat-sinks n Ingress protection against sand, dust and moisture n Anodize coating, MIL-A-8625, Type II, Class 2 n Standards n MIL-STD-1275, MIL-STD-704A, MIL-STD-461E, n MIL-STD-810F GM, IP67/68 50 Dimensional line drawing Product specifications All measurements are in millimeters Performance * * * * * 26.8 Mpps wire speed forwarding rate 2 Gbps maximum forwarding bandwidth 4K MAC address 2 LED indication (Speed, Link/Activity) per port Wire-speed reception and transmission Standards compliance * * * * * Power * * * * IEEE 802.3, 10 Mbps 10BASE-T (Ethernet) IEEE 802.3u, 100 BASE-TX 100 Mbps (Fast Ethernet) IEEE 802.3ab, 1000Base-TX IEEE 802.3z, 1000Base-FX Gigabit IEEE 802.3x Flow control MIL-STD-1275B & MIL-STD-704A Surge and Spike protection Voltage input: 24Vdc nominal (18-36V) Power consumption: 2.8W typical Chassis grounding Electromagnetic * * MIL-STD-461E Electromagnetic compatibility CE-102, CS-114, CS-115, CS-116, RE-102, RS-103 Environmental : shock/vibration/humidity * Physical * * MIL-STD-810F, 501.4I, 501.4II, 502.4I, 502.4II, 507.4, 500.4II, 514, 516I, 516VI, 514.5, 512.4 IP67/68 Dimensions: 169mm (L) x 149 (W) x 65(H), including connectors & hardware Weight: 1.260 kg Amphenol * Installation * * Cooling * Set of Four 4x4.5 mounting holes on bottom for mounting to any flat surface. Carrying handles - Optional No moving parts. Passive cooling. All measure ments are in millimeters Not to scale Operating temp * -35C to +75C (-31F to +167F) / -35C Cold start-up Storage temp * -45C to +85C (-49F to +185F) Description Part number RES-GMC-1M-RJF-CTOS * * MIL-STD Rugged Ethernet Media Converter with CTOS fiber connector 1 x 10/100/1000TX to 1000SX, MM RES-GMC-1S-RJF-CTOS * * MIL-STD Rugged Ethernet Media Converter with CTOS fiber connector 1 x 10/100/1000TX to 1000LX, SM, 10 KM RES-GMC-1M-RJF-TACBEAM * * MIL-STD Rugged Ethernet Media Converter with TAC BEAM fiber connector 2 x 10/100/1000TX to 2 x 1000SX, MM RES-GMC-1S-RJF-TACBEAM * * MIL-STD Rugged Ethernet Media Converter with TAC BEAM fiber connector 2 x 10/100/1000TX to 2 x 1000LX, SM, 10 KM For accessories, please consult us. 51 RES-GMC with butt joint fiber connector Military Ethernet media converter NEW For harsh environment - Fully MIL-STD compliant Amphenol's RES-GMC is a MIL-STD rugged, unmanaged-military-grade security gateway, offering up to 2 Gigabit security gateways per device for unidirectional and data diodes solution for total isolation between two network with different security classification. The unit supports PoE on 2 ports (IEEE802.3af and IEEE802.3at). Developed for military and harsh environment applications, the RES-GMC features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling, and interface through sealed MIL-D-38999 circular connectors. Leveraging best-in-class switching technology, the RES-GMC series serves as a robust solution to extend your Tactical Gigabit Ethernet network connectivity of up to 120Km over fiber. Compact in size, the RES-GMC is particularly useful for remote and space-constrained locations either on ground vehicle environments or airborne. Military applications n Data acquisition & transmission nBattlefield communication C4ISR n Rugged Networks nCombat vehicles nAvionic & shipboard systems Key features Amphenol n Ethernet ports n 10/100/1000 Base TX to 100/1000 Base FX-(MM/SM) Network isolator One way data flow for total isolation between classified and unclassified networks n Up to 2 security gateways per device over optical fiber n Networking n Full wire-speed forwarding rate n Option for Up to 2 ports PoE - IEEE802.3af, IEEE802.3at n Auto MDI-II, MDI-X, FDX, HDX, Flow control n Auto-negotiation and fixed settings via DIP switch n Jumbo frame support n Option for one way fiber security n Connectors n MIL-D-38999 (Power & Ethernet signals) n Power connector type: D38999/24WA98PN n LAN connector type: D38999/24WB35SN (2 ports model) or RJFTV (1 port model) n Fiber connector type: TVOP arrangement 11-02 n Chassis n Low profile rugged aluminium extrusion n Conductively cooled w/custom internal heat-sinks n Ingress protection against sand, dust and moisture n Anodize coating, MIL-A-8625, Type II, Class 2 n Standards n MIL-STD-1275, MIL-STD-704A, MIL-STD-461E, n MIL-STD-810F GM, IP67/68 n Voltage operation n 24VDC (18VDC ~ 36VDC), 48VDC for PoE versions 52 Dimensional line drawing Product specifications All measurements are in millimeters Performance * * * * * 26.8 Mpps wire speed forwarding rate 20 Gbps maximum forwarding bandwidth 4K MAC address 2 LED indication (Speed, Link/Activity) per port Wire-speed reception and transmission Standards compliance * * * * * Power * * * * IEEE 802.3, 10 Mbps 10BASE-T (Ethernet) IEEE 802.3u, 100 BASE-TX 100 Mbps (Fast Ethernet) IEEE 802.3ab, 1000Base-TX IEEE 802.3z, 1000Base-FX Gigabit IEEE 802.3af, IEEE802.3at MIL-STD-1275B & MIL-STD-704A Surge and Spike protection Voltage input: 24Vdc nominal (18-36V) Power consumption: 2.8W typical Chassis grounding Electromagnetic * * MIL-STD-461E Electromagnetic compatibility CE-102, CS-114, CS-115, CS-116, RE-102, RS-103 Environmental : shock/vibration/humidity * Physical * * MIL-STD-810F, 501.4I, 501.4II, 502.4I, 502.4II, 507.4, 500.4II, 514, 516I, 516VI, 514.5, 512.4 IP67/68 Dimensions: 170mm(L) x 150(W) x 65(H), including connectors & hardware Weight: 1 kg Installation * * Cooling * Set of Four 4x4.5 mounting holes on bottom for mounting to any flat surface. Carrying handles - Optional Amphenol * No moving parts. Passive cooling. Operating temp * -35C to +75C (-31F to +167F) / -35C Cold start-up Storage temp * -45C to +85C (-49F to +185F) Description Part number RES-GMC-1M * * MIL-STD Rugged Ethernet Media Converter with TVOP connector 1 x 10/100/1000TX to 1000SX, MM RES-GMC-1S * * MIL-STD Rugged Ethernet Media Converter with TVOP connector 1 x 10/100/1000TX to 1000LX, SM, 10 KM RES-GMC-2M * * MIL-STD Rugged Media Converter with TVOP connector 2 x 10/100/1000TX to 2 x 1000SX, MM RES-GMC-2S * * MIL-STD Rugged Media Converter with TVOP connector 2 x 10/100/1000TX to 2 x 1000LX, SM, 10 KM For accessories, please consult us. 53 NEW RES-GMC-1M-FORC Military Ethernet Media Converter with Remote Control For fiber extension of existing systems on the Field Amphenol's RES-GMC-1M-FORC is a MIL-STD rugged, unmanaged-military-grade Media converter, offering one Gigabit copper ports 10/100/1000Base-TX and one 100/1000Base-SX fiber ports. Combining the RES-GMC-1M-FORC with a fiber drum, your network will be extended on the field. * Simply add 2 media converters unit 1 and unit 2 + a fiber drum * Use our special feature: unit 2 is remote controlled by unit 1 Due to extreme low consumption of unit 2 in STANDBY mode, your battery on the field will operate longer. Developed for military and harsh environment applications, the RES-GMC-1M-FORC features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling, and interface through sealed MIL-D-38999 circular connectors. Leveraging best-in-class technology, the RES-GMC-1M-FORC series serves as a robust solution to extend your Tactical Gigabit Ethernet network connectivity over fiber. Military applications n Data acquisition & transmission nBattlefield communication C4ISR n Rugged Networks nCombat vehicles Where your system can be extended through network. Unit 1 Amphenol Key features n Ethernet ports n 10/100/1000 Base TX to 100/1000 Base SX-(MM) Media converter Fiber drum n Networking n Full wire-speed forwarding rate n Store-and-forward or Pass through mechanism n Auto MDI-II, MDI-X, FDX, HDX, Flow control n Auto-negotiation and fixed settings via DIP switch n Jumbo frame support n Link loss forwarding mechanism n Connectors n MIL-D-38999 (Power & Ethernet signals) n Fiber connector type: CTOS 77 PC (2 fibers for Ethernet, 1 fiber for remote control) n Protective caps over each connector n Chassis n Low profile rugged aluminium extrusion n Conductively cooled w/custom internal heat-sinks n Ingress protection against sand, dust and moisture n Anodize coating, MIL-A-8625, Type II, Class 2 n Color: sand mate n Standards n MIL-STD-1275, MIL-STD-704A, MIL-STD-461E, n MIL-STD-810F GM, IP67/68 54 Unit 2 Dimensional line drawing Product specifications All measurements are in millimeters Performance * * * * * 26.8 Mpps wire speed forwarding rate 2 Gbps maximum forwarding bandwidth 4K MAC address 2 LED indication (Speed, Link/Activity) per port Wire-speed reception and transmission Standards compliance * * * * * Power * * * * * * IEEE 802.3, 10 Mbps 10BASE-T (Ethernet) IEEE 802.3u, 100 BASE-TX 100 Mbps (Fast Ethernet) IEEE 802.3ab, 1000Base-TX IEEE 802.3z, 1000Base-FX Gigabit IEEE 802.3x Flow control MIL-STD-1275B & MIL-STD-704A Surge and Spike protection Voltage input: 24Vdc nominal (18-36V) Power switching of the external DC input of unit 2 upon ON/OFF command from unit 1 Maximum power consumption: 5W for unit 1, 10W for unit 2 Standby consumption of unit 2: <0.1W Chassis grounding Electromagnetic * MIL-STD-461E Electromagnetic compatibility Environmental : shock/vibration/humidity * Physical * * MIL-STD-810F, 501.4I, 501.4II, 502.4I, 502.4II, 507.4, 500.4II, 514, 516I, 516VI, 514.5, 512.4 IP67/68 Dimensions: 170mm(L) x 140(W) x 110(H), including connectors & hardware Weight: 1.55kg for unit 1, 1.80kg for unit 2 Installation * Cooling * Set of Four 4x4.3 mounting holes on bottom for mounting to any flat surface. Amphenol * No moving parts. Passive cooling. Operating temp * -35C to +75C (-31F to +167F) / -35C Cold start-up Storage temp * -45C to +85C (-49F to +185F) Description RES-GMC-1M-FORC-1 Part number RES-GMC-1M-FORC-2 CTOS drum MIL-STD Rugged Gigabit Media Converter unit 1, 1x RJF connector, 1x fiber CTOS connector, MM, SX MIL-STD Rugged Gigabit Media Converter unit 2, 1x RJF connector, 1x fiber CTOS connector, MM, SX, remote controlled by unit 1 Please consult us For accessories, please consult us. 55 RES-SCE-AC-8US NEW Unmanaged miniature portable Ethernet switch - 8 fast ports Military ethernet switch for harsh environment - Fully MIL-STD compliant Amphenol's RES-SCE-AC-8US is a MIL-STD rugged, unmanaged-military-grade Ethernet switch, offering 8 Fast Ethernet 10/100 Ports. The portable rugged Ethernet switch is intended for Command Post Man Packable. Developed for mobile portable military and harsh environment applications, the RES-SCE-AC-8US features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling, and interface through sealed MIL-SCE circular connectors. Leveraging best-in-class switching technology, the RES-SCE-AC-8US serves as a robust solution for providing local area network (LAN) connectivity to IP-enabled computing and net-centric devices. Compact in size, the RES-SCE-AC-8US is particularly useful for expanding port density in space-constrained airborne and ground vehicle environments. Military applications n Data acquisition & transmission nBattlefield communication C4ISR n Rugged Networks n Mobile communications nCombat vehicles nAvionic & shipboard systems Amphenol Key features n Ethernet ports n8 x switched 10/100 (Fast Ethernet) ports n Networking n F ull wire-speed forwarding rate n Store-and-forward mechanism nA uto MDI-II, MDI-X nA uto-negotiation protocol nA ddress look-up n Connectors nP ower + LAN connector : SCE2-B-76A06-07SN-001 n Chassis n Low profile rugged aluminium extrusion nC onductively cooled w/ custom internal heat-sinks n Ingress protection against sand, dust and moisture nA nodize coating, MIL-A-8625, Type II, Class 2 n Standards nM IL-STD-461E, MIL-STD-810F/G/GM, IP67/68 n Voltage operation n 5VDC (USB) INPUT, shared with LAN Port Number 1 56 Dimensional line drawing Product specifications All measurements are in millimeters Performance * * * * * * 128K byte of SRAM for frame buffering 2.0 Gbps high-performance memory bandwidth LED indication (speed, link/activity) per port - Optional Wire-speed reception and transmission Integrated address look-up engine Automatic address learning Standards compliance * * * Power * * * IEEE 802.3 10 Mbps 10BASE-T (Ethernet) IEEE 802.3u 100BASE-TX 100 Mbps (Fast Ethernet) IEEE 802.3x flow control Voltage input: 5Vdc nominal - Optional USB sourcing Power consumption: 2W typical Chassis grounding Electromagnetic * * MIL-STD-461E electromagnetic compatibility CE-102, CS-114, CS-115, CS-116, RE-102, RS-103 Environmental * Physical * * MIL-STD-810F/G/GM Random vibration (514.5I), Bench handling (516.6VI), High temp (501.5I, II), Low temp (502.5I), Humidity (507.5II), Air pressure (500.5I, II), Blowing rain (506.5I), Immersion (512.5I), Salt atmosphere (509.5I), Blowing dust (510.5I), Loose cargo vibration (514.6II), Wind analysis IP67/68 Dimensions: 82.2mm (L) x 61.4 (W) x 26 (H), Not including connectors Dust Caps. Weight: 140g - Not including dust caps Installation * Cooling * Portable, flat for mounting to any flat surface. Amphenol * * No moving parts. Passive cooling. Operating temp * -35C to +75C (-31F to +167F) / -35C Cold start-up Storage temp * -45C to +85C (-49F to +185F) Description RES-SCE-AC-8US * * * * RES-SCE-AC-8US MIL-STD Rugged 8 x 10/100TX Unmanaged switch RES-SCE-CBL-1M50 * * * Starter cable set for MILTECH-308 MIL-SCE to RJ-45 connectors 1m50 (5 feet) length (Data or Data+Power) Part number For accessories, please consult us. 57 NEW RES-SCE-8MG Managed miniature portable Ethernet switch - 8 Gigabit ports Military ethernet switch for harsh environment - Fully MIL-STD compliant Amphenol's RES-SCE-8MG is a MIL-STD rugged, managed-military-grade Ethernet switch, offering 8 Gigabit Ethernet 10/100/1000 Ports. The portable rugged Ethernet switch is intended for Command Post Man Packable. Developed for mobile portable military and harsh environment applications, the RES-SCE-8MG features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling, and interface through sealed miniature circular connectors. Leveraging best-in-class switching technology, the RES-SCE-8MG serves as a robust solution for providing local area network (LAN) connectivity to IP-enabled computing and net-centric devices. Compact in size, the RES-SCE-8MG is particularly useful for expanding port density in space-constrained airborne and ground vehicle environments. Military applications n Data acquisition & transmission n Mobile communications n Battlefield communication C4ISR n Combat vehicles n Rugged Networks n Avionic & shipboard systems Key features n Ethernet ports n Managed 8 x switched 10/ 100/ 1000 ports Amphenol n Networking n S panning Tree (802.1d), RSTP (802.1w) and multiple Spanning Tree (802.1S) for fast recovery rings n Security via Radius Authentication 802.1x, Port Security, Port Mirroring nM ulticasting (IGMP Snooping), GARP, GMRP, and GVRP Broadcasting and flooding Control up to 8K Groups n 802.1q Tagged based VLAN up to 4K VLAN groups n QoS Multi-Layer Classifier, 802.1p, ToS/DSCP traffic classification. WFQ, Strict Queuing. nB ridge support for Q-in-Q n L ink Aggregation 802.3AD nW EB, CLI, Telnet Management n Connectors nP ower connector type: SCE2-B-76A06-07SN n LAN connector type: SCE2-B-76A07-14SN-001 n LE D indication per port (speed, link/activity) n Chassis n Low profile rugged aluminium extrusion nC onductively cooled w/ custom internal heat-sinks n Ingress protection against sand, dust and moisture n Anodize coating, MIL-A-8625, Type II, Class 2 n Standards n MIL-STD-1275, MIL-STD-704A, MIL-STD-461E, MIL-STD810F GM, IP67/68 n Performance n2 6.8 Mpps wire speed forwarding rate n2 0 Gbps maximum forwarding bandwidth n8 K MAC address 58 Dimensional line drawing Product specifications All measurements are in millimeters Standards compliance * * * * * * Power * * * * IEEE 802.1x MAC based Authentication IEEE 802.1Q Vlan Tagging IEEE 802.1P QoS IEEE 802.1S Multiple STP IEEE 802.1W Rapid STP IEEE 802.3 AD Link Aggregation Exceed MIL-STD-1275B Surge and Spike protection Voltage Input: 24Vdc Nominal (16-36 VDC) Power Consumption: 7.2W Max - 5W Typical Chassis grounding Electromagnetic * * MIL-STD-461E Electromagnetic compatibility CE-102, CS-114, CS-115, CS-116, RE-102, RS-103 Environmental * * * Physical * * MIL-STD-810F/G/GM Random vibration (514.5I), Bench handling (516.6VI), High temp (501.5I, II), Low temp (502.5I), Humidity (507.5II), Air pressure (500.5I, II), Blowing rain (506.5I), Immersion (512.5I), Salt atmosphere (509.5I), Blowing dust (510.5I), Loose cargo vibration (514.6II), Wind analysis IP67/68 Dimensions: 100mm (L) x 89 (W) x 36 (H), including connectors & hardware. Weight: 390g Installation Cooling * Set of Four 4-40 threads on bottom for mounting to any flat surface Amphenol * No moving parts. Passive cooling. Operating temp * -35C to +75C (-31F to +167F) / -35 C Cold start-up Storage temp * -45C to +85C (-49F to +185F) Description RES-SCE-8MG * * * * MIL-STD Rugged Managed miniature switch 8 x 10/100/1000TX With caps RES-SCE-8MG-CBL-ETH-RJ45-2M * * * * Ethernet cordset for LAN 1 to 8 With RJFSFTP5E cable RJ45 end plug 2 m long Part number For accessories, please consult us. 59 Resmlac-8us-CAPS NEW Unmanaged military Ethernet switch, MIL-DTL-38999 connectors 8 fast ports Military ethernet switch for harsh environment - Fully MIL-STD compliant Amphenol's RESMLAC-8US-CAPS is a MIL-STD rugged, unmanaged-military-grade Ethernet switch, offering 8 Fast Ethernet 10/100 Ports. Developed for military and harsh environment applications, the RESMLAC-8US-CAPS features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling, and interface through sealed MIL-D-38999 circular connectors. Leveraging best-in-class switching technology, the RESMLAC-8US-CAPS serves as a robust solution for providing local area network (LAN) connectivity to IP-enabled computing and net-centric devices. Compact in size, the RESMLAC-8US-CAPS is particularly useful for expanding port density in space-constrained airborne and ground vehicle environments. Military applications n Data acquisition & transmission nBattlefield communication C4ISR n Rugged Networks n Mobile communications nCombat vehicles nAvionic & shipboard systems Amphenol Key features n Ethernet ports n8 x switched 10/100 (Fast Ethernet) ports n Networking n F ull wire-speed forwarding rate n Store-and-forward mechanism nA uto MDI-II, MDI-X nA uto-negotiation protocol nA ddress look-up n Connectors nM IL-D-38999 (Power & Ethernet signals) nP ower connector type: D38999/24WA98PA n LAN connector type: D38999/24WA35SN n Chassis n Low profile rugged aluminium extrusion nC onductively cooled w/ custom internal heat-sinks n Ingress protection against sand, dust and moisture nA nodize Coating, MIL-A-8625, Type II, Class 2 n Standards n MIL-STD-1275, MIL-STD-704A, MIL-STD-461E, MIL-STD-810F GM, IP67/68 n Voltage operation n2 4VDC (18VDC ~ 36VDC) 60 Dimensional line drawing Product specifications All measurements are in millimeters * * * * * * 128K byte of SRAM for frame buffering 2.0 Gbps high-performance memory bandwidth 2 LED indication (speed, link/activity) per port Wire-speed reception and transmission Integrated address look-up engine Automatic address learning 58.7 Performance 269.0 Standards compliance * * * MIL-STD-1275B & MIL-STD 704A surge and spike protection Voltage input: 24Vdc nominal (18-32V) Power consumption: 2.8W typical Chassis grounding Electromagnetic * * * Physical * POWER 35.5 MIL-STD-461E electromagnetic compatibility CE-102, CS-114, CS-115, CS-116, RE-102, RS103 Environmental * LAMP 123.0 (x2) * NAME PLATE 210.0 29.5 5.2 (x4) GND SCREW #8-32, Height 8.7mm 5.0 Power 67.5 44.2 * IEEE 802.3 10 Mbps 10BASE-T (Ethernet) IEEE 802.3u 100BASE-TX 100 Mbps (Fast Ethernet) IEEE 802.3x flow control 132.9 96.3 * * MIL-STD-810F, 501.4I, 501.4II, 502.4I, 502.4II, 507.4, 500.4II, 514, 516I, 516Vi, 514.5, 512.4 IP67/68 29.4 30.0 30.0x7=210.0 Dimensions: 269mm(L) x 133(W) x 65(H), including connectors & hardware Installation Cooling * Set of four 4x4.5 mounting holes on bottom for mounting to any flat surface. No moving parts. Passive cooling. Operating temp * -35C to +75C (-31F to +167F) / -35C Cold start-up Storage temp * Amphenol * -45C to +85C (-49F to +185F) Description Part number RESMLAC 8US CAPS * * * * * MIL-STD rugged 8 x 10/100TX Unmanaged switch with caps color dark green RESMLAC 8US CAPS SX * * * * * MIL-STD rugged 8 x 10/100TX Unmanaged switch with caps color black RESMLAC 8US CBL 1M50 * * * Starter cable set for RESMLAC MIL-D-38999 to RJ-45 connectors 1m50 (5 feet) length For accessories, please consult us. 61 RJsmlac-8uG-CAPS NEW Unmanaged military Ethernet switch, MIL-DTL-38999 connectors 8 Gigabit ports Military ethernet switch for harsh environment - Fully MIL-STD compliant Amphenol's RESMLAC-8UG-CAPS is a MIL-STD rugged, unmanaged-military-grade Ethernet switch, offering 8 triple speed Ethernet (10/100 /1000) ports. Ethernet connectors are RJFTV, using RJField patented system that allows easy and quick assembly of any standard RJ45 cordset without any tool. Developed for military and harsh environment applications, the RJSMLAC features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling. Leveraging best-in-class switching technology, the RJSMLAC serves as a robust solution for providing local area network (LAN) connectivity to IP-enabled computing and net-centric devices. Compact in size, the RJSMLAC is particularly useful for expanding port density in space-constrained airborne and ground vehicle environments. Military applications n Data acquisition & transmission nBattlefield communication C4ISR n Rugged Networks n Mobile communications nCombat vehicles nAvionic & shipboard systems Key features Amphenol n Ethernet ports n8 x switched 10/100/1000 (Gigabit Ethernet) ports on RJFTV connectors n Networking n F ull wire-speed forwarding rate n Store-and-forward mechanism nA uto MDI-II, MDI-X nA uto-negotiation protocol nA ddress look-up n Connectors nP ower connector type: MIL-DTL-38999/24WA98PN n LAN connector type: RJFTV (coupling mechanism from MILDTL-38999) n LE D indication per port (speed, link/activity) n Chassis n Low profile rugged aluminium extrusion nC onductively cooled w/ custom internal heat-sinks n Ingress protection against sand, dust and moisture n F inish of epoxy-polyamide paint per MIL-C-83286, olive green, semi-gloss n Standards nM IL-STD-1275, MIL-STD-704A, MIL-STD-461E, MIL-STD-810F GM, IP67/68 n Voltage operation n2 4VDC (18VDC ~ 36VDC) 62 Dimensional line drawing Product specifications All measurements are in millimeters Performance * * * * * * 128K byte of SRAM for frame buffering 2.0 Gbps high-performance memory bandwidth 2 LED indication (speed, link/activity) per port Wire-speed reception and transmission Integrated address look-up engine Automatic address learning Standards compliance * * * * Power * * * * IEEE 802.3 10BASE-T (Ethernet) IEEE 802.3u 100BASE-T (Fast Ethernet) IEEE 802.3ab 1000BASE-T (Gigabit Ethernet) IEEE 802.3x flow control 157.5 MIL-STD-1275B & MIL-STD 704A surge and spike protection Voltage input: 24Vdc nominal (18-32V) Power consumption: 2.8W typical Chassis grounding Electromagnetic * * MIL-STD-461E electromagnetic compatibility CE-102, CS-114, CS-115, CS-116, RE-102, RS103 Environmental * Physical * * MIL-STD-810F, 501.4I, 501.4II, 502.4I, 502.4II, 507.4, 500.4II, 514, 516I, 516Vi, 514.5, 512.4 IP67/68 Dimensions: 269mm(L) x 133(W) x 65(H), including connectors & hardware Weight: 1.8kg Installation * Cooling * Set of four 4x4.5 mounting holes on bottom for mounting to any flat surface. Amphenol * No moving parts. Passive cooling. Operating temp * -35C to +75C (-31F to +167F) / -35C Cold start-up Storage temp * -45C to +85C (-49F to +185F) Description Part number RJSMLAC 8UG CAPS * * * * * MIL-STD rugged 8 x gigabit ports Unmanaged switch with caps and handles dark green For accessories, please consult us. 63 rjsmlac-8mg-CAPS NEW managed military Ethernet switch, RJFTV connectors - 8 Gigabit ports Military ethernet switch for harsh environment - Fully MIL-STD compliant Amphenol's RJSMLAC-8MG-CAPS is a MIL-STD Fully managed Military-grade network switch offering 8 triple speed (10/100/1000) ports. Ethernet connectors are RJFTV, using RJField patented system that allows easy and quick assembly of any standard RJ45 cordset without any tool. Developed for military and harsh environment applications, the RJSMLAC-8MG-CAPS features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling, and interface through sealed MIL-DTL-38999 circular connectors. Leveraging best-in-class switching technology, the RJSMLAC-8MG-CAPS serves as a robust solution for providing local area network (LAN) connectivity to IP-enabled computing and net-centric devices. Compact in size, the RJSMLAC-8MG-CAPS is particularly useful for expanding port density in space-constrained airborne and ground vehicle environments. Military applications n Data acquisition & transmission nBattlefield communication C4ISR n Rugged Networks n Mobile communications nCombat vehicles nAvionic & shipboard systems Key features Amphenol n Ethernet ports n Managed 8 x switched 10/100/1000 ports on RJFTV connectors n Networking n Spanning tree (802.1d), RSTP (802.1w) and multiple n Spanning tree (802.1S) for fast recovery rings n Security via Radius Authentication 802.1x, port security, port mirroring n Multicasting (IGMP Snooping), GARP, GMRP, and GVRP, Broadcasting and flooding control up to 8K groups. n 802.1q tagged based VLAN up to 4K VLAN groups. n QoS multi-layer classifier, 802.1p, ToS/DSCP traffic classification. WFQ, Strict Queuing. n Bridge support for Q-in-Q. n Link aggregation 802.3AD. n WEB, CLI, Telnet management. n Connectors n Power connector type: MIL-DTL-38999/24WA98PA n LAN connector type: RJFTV (coupling mechanism from MIL-DTL-38999) n LED indication per port (Speed, Link/Activity) n Chassis n Low profile rugged aluminium extrusion n Conductively cooled w/custom internal heat-sinks n Ingress protection against sand, dust and moisture n Anodize coating, MIL-A-8625, Type II, Class 2 n Standards n MIL-STD-1275, MIL-STD-704A, MIL-STD-461E, n MIL-STD-810F GM, IP67/68 64 Amphenol PRODUCT SPECIFICATIONS Dimensional line drawing Product specifications VOLTAGE OPERATION: * 24VDCVolage (18VDC ~ 32VDC) operation All measurements are in millimeters Dimensional Line Drawing 24VDC (18VDC ~ 32VDC) PERFORMANCE: * * 26.8 Mpps wire speed forwarding rate * 20 GbpsPerformance maximum forwarding bandwidth * 26.8 Mpps wire speed forwarding rate * 8K MAC Address * 20 Gbps maximum forwarding bandwidth * 8K MAC address STANDARDS COMPLIANCE: * IEEE 802.1x MAC based Authentication Standards compliance * IEEE 802.1Q Vlan Tagging * IEEE 802.1x MAC based authentication * IEEE 802.1P QoS * IEEE 802.1Q Vlan tagging * IEEE 802.1S STP QoS * Multiple IEEE 802.1P * IEEE 802.1W STP Multiple STP * Rapid IEEE 802.1S * Link IEEE Aggregation 802.1W Rapid STP * IEEE 802.1AD * IEEE 802.3AD Link aggregation * IEEE 802.1X POWER: Power * Exceed MIL-STD-1275B Surge and Spike * Exceed MIL-STD-1275B surge protection and spike protection * Voltage Input: 24Vdc Nominal (18-32V) * Voltage7W input: 24Vdc nominal (18-32V) * Power Consumption: Typical * Power consumption: 2.8W typical * Chassis grounding * Chassis grounding ELECTROMAGNETIC: Electromagnetic * MIL-STD-461E Electromagnetic compatibility * MIL-STD-461E electromagnetic * RE-02, RS-03 compatibility SHOCK/VIBRATION/HUMIDITY: * CE-102, CS-114, CS-115, CS-116, RE-102, RS-103 501.4II, 502.4I, 502.4II, 507.4, * MIL-STD-810F; 501.4I, 500.4II, 514, 516I, 516VI, 514.5, 512.4 * IP68 Environmental : shock/vibration/humidity * MIL-STD-810F, 501.4I, 501.4II, 502.4I, 502.4II, * Dimensions: 287mm(L) x 147(W) x 50(H), * Set of four 4.5 mounting holes on bottom Amphenol PHYSICAL: 507.4, 500.4II, 514, 516I, 516VI, 514.5, 512.4 * Dimensions: * 287mm IP67/68(L) x 158(W) x 54(H), including connectors & hardware * Weight:Physical 1.5kg INSTALLATION: including connectors & hardware * Set of Four *4.5 mounting on bottom for mounting Weight: 1.8 holes kg to any flat surface. * CarryingInstallation handles COOLING: for mounting to any flat surface. * No Moving Parts. Passive Cooling * Carrying handles OPERATING TEMP: Cooling * -35C to +75C (-31F to +167F) - Cold Start-Up * No moving parts. Passive cooling. STORAGE TEMP: tempto +185F) * -45C toOperating +85C (-49F * *All measurements are in millimeters -35C to +75C (-31F to +167F) / -35C Cold start-up ORDERING INFORMATION Storage temp PART NUMBER * RJSMLAC 8MG CAPS -45C to +85C (-49F to +185F) DESCRIPTION MIL-STD Rugged L2/3 Managed Ethernet Switch, 8 x 10/100/1000TX with RJFTV, with caps and handles Description Amphenol SocapexRJSMLAC Promenade de l'Arve -B.P.29 - 74311 THYEZ - FRANCE 8MG CAPS * MIL-STD rugged Part Phone. :+ 33 (0) 4 50 89 28 00 - Fax : + 33 (0) 4 50 96 - E-mail: contact@rjswitch.com * 29875 x 10/100/1000TX with RJFTV number http://www.rjswitch.com * Managed switch * * Amphenol (R) With caps and handles Dark green For accessories, please consult us. 65 resmlac-8mg-CAPS NEW managed military Ethernet switch, MIL-DTL-38999 connectors 8 Gigabit ports Military ethernet switch for harsh environment - Fully MIL-STD-compliant Amphenol's RESMLAC-8MG-CAPS is a MIL-STD fully managed Military-grade network switch offering 8 triple speed (10/100/1000) ports. Developed for military and harsh environment applications, the RESMLAC-8MG-CAPS features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling, and interface through sealed MIL-DTL-38999 circular connectors. Leveraging best-in-class switching technology from Amphenol, the RESMLAC-8MG-CAPS serves as a robust solution for providing local area network (LAN) connectivity to IP-enabled computing and net-centric devices. Compact in size, the RESMLAC-8MG-CAPS is particularly useful for expanding port density in space-constrained airborne and ground vehicle environments. Military applications n Data acquisition & transmission nBattlefield communication C4ISR n Rugged Networks n Mobile communications nCombat vehicles nAvionic & shipboard systems Key features Amphenol n Ethernet ports n Managed 8 x switched 10/100/1000 ports n Networking n Spanning tree (802.1d), RSTP (802.1w) and multiple n Spanning tree (802.1S) for fast recovery rings n Security via Radius authentication 802.1x, port security, port mirroring n Multicasting (IGMP Snooping), GARP, GMRP, and GVRP, Broadcasting and flooding control up to 8K groups. n 802.1q tagged based VLAN up to 4K VLAN groups. n QoS multi-layer classifier, 802.1p, ToS/DSCP traffic classification. WFQ, Strict Queuing. n Bridge support for Q-in-Q. n Link aggregation 802.3AD. n WEB, CLI, Telnet management. n Connectors n Power connector type: MIL-DTL-38999/24WA98PA n LAN connector type: MIL-D-38999/24WB35SN n LED indication per port (Speed, Link/Activity) n Chassis n Low profile rugged aluminium extrusion n Conductively cooled w/custom internal heat-sinks n Ingress protection against sand, dust and moisture n Anodize coating, MIL-A-8625, Type II, Class 2 n Standards n MIL-STD-1275, MIL-STD-704A, MIL-STD-461E, n MIL-STD-810F GM, IP67/68 n Voltage operation n 24VDC (18VDC ~ 32VDC) 66 Dimensional line drawing Product specifications All measurements are in millimeters Performance * * * 26.8 Mpps wire speed forwarding rate 20 Gbps maximum forwarding bandwidth 8K MAC address Standards compliance 132.9 MIL-STD-461E electromagnetic compatibility CE-102, CS-114, CS-115, CS-116, RE-102, RS-103 Environmental : shock/vibration/humidity * * Physical * * MIL-STD-810F, 501.4I, 501.4II, 502.4I, 502.4II, 507.4, 500.4II, 514, 516I, 516VI, 514.5, 512.4 IP67/68 29.5 31.0 43.0 70.0 Dimensions: 269mm(L) x 133(W) x 79(H), including connectors & hardware Weight: 1.5 kg Cooling * Set of four 4.5 mounting holes on bottom for mounting to any flat surface. Carrying handles 79.8 60.8 * 35.0 43.0 129.0 238.0 Installation * #8-32X0.375* GROUNDING SCREW 32.3 49.3 * NAME PLATE (x4) Electromagnetic * 210.0 . 5.2H9 Amphenol * * * Exceed MIL-STD-1275B surge and spike protection Voltage input: 24Vdc nominal (18-32V) Power consumption : 7W typical Chassis grounding 80.7 92.3 * 269.0 123.0 Power IEEE 802.1x MAC based authentication IEEE 802.1Q Vlan Tagging IEEE 802.1P QoS IEEE 802.1S Multiple STP IEEE 802.1W Rapid STP IEEE 802.3AD Link aggregation 5.0 * * * * * * No moving parts. Passive cooling. Operating temp * -35C to +75C (-31F to +167F) / -35C Cold start-up Storage temp * -45C to +85C (-49F to +185F) Description RESMLAC 8MG CAPS * * * * * MIL-STD Rugged 8 x 10/100/1000TX Managed switch with caps and handles dark green RESMLAC 8MG CBL 1M50 * * * Starter cable set for RESMLAC MIL-D-38999 to RJ-45 connectors 1m50 (5 feet) length Part number For accessories, please consult us. 67 RESMLAC-8MG-CAPS-F35 NEW managed military Ethernet switch, MIL-DTL-38999 connectors 8 Gigabit ports Military ethernet switch for harsh environment - Fully MIL-STD-compliant Amphenol's RESMLAC 8MG CAPS F35 is a MIL-STD fully managed Military-grade network switch offering 8 triple speed (10/100/1000) ports. Developed for military and harsh avionic applications, the RESMLAC 8MG CAPS F35 features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling, and interface through sealed MIL-DTL-38999 circular connectors. Leveraging best-in-class switching technology from Amphenol, the RESMLAC 8MG CAPS F35 serves as a robust COTS solution for providing local area network (LAN) connectivity to IP-enabled computing and net-centric devices. Compact in size, the RESMLAC 8MG CAPS F35 is particularly useful for expanding port density to tactical IP routers in space-constrained airborne and ground vehicle environments. Military applications n Data acquisition & transmission nBattlefield communication C4ISR n Rugged Networks n Mobile communications nCombat vehicles nAvionic & shipboard systems Key features Amphenol n Ethernet ports n Managed 8 x switched 10/100/1000 ports n Networking n Spanning tree (802.1d), RSTP (802.1w) and multiple n Spanning tree (802.1S) for fast recovery rings n Security via Radius authentication 802.1x, port security, port mirroring n Multicasting (IGMP Snooping), GARP, GMRP, and GVRP, Broadcasting and flooding control up to 8K groups. n 802.1q tagged based VLAN up to 4K VLAN groups. n QoS multi-layer classifier, 802.1p, ToS/DSCP traffic classification. WFQ, Strict Queuing. n Bridge support for Q-in-Q. n Link aggregation 802.3AD. n WEB, CLI, Telnet management. n Connectors n Power connector type: MIL-DTL-38999/24WB35PN n LAN connector type: MIL-D-38999/24WF35PN n LED indication per port (Speed, Link/Activity) n Chassis n Low profile rugged aluminium extrusion n Conductively cooled w/custom internal heat-sinks n Ingress protection against sand, dust and moisture n Anodize coating, MIL-A-8625, Type II, Class 2 n Standards n MIL-STD-1275B, MIL-STD-704A, MIL-STD-461A, n MIL-STD-810F GM, IP67/68 n Voltage operation n Nominal 24VDC 68 Dimensional line drawing Product specifications All measurements are in millimeters Performance * * * 26.8 Mpps wire speed forwarding rate 20 Gbps maximum forwarding bandwidth 8K MAC address Standards compliance * * * * * * Power * * * * IEEE 802.1x MAC based authentication IEEE 802.1Q Vlan Tagging IEEE 802.1P QoS IEEE 802.1S Multiple STP IEEE 802.1W Rapid STP IEEE 802.3AD Link aggregation Exceed MIL-STD-1275B surge and spike protection Voltage input: 24Vdc nominal (18-32V) Power consumption : 7W typical Chassis grounding Electromagnetic * * Exceed MIL-STD-461A electromagnetic compatibility RE-02, RS-03 Environmental : shock/vibration/humidity * Physical * * MIL-STD-810F, 501.4I, 501.4II, 502.4I, 502.4II, 507.4, 500.4II, 514, 516I, 516VI, 514.5, 512.4 Dimensions: 209.6mm(L) x 136(W) x 44.4(H), including connectors Weight: 1.1 kg * Cooling * Amphenol Installation Set of four #10-32 captive screws for mounting to any flat surface No moving parts. Passive cooling. Operating temp * -35C to +75C (-31F to +167F) / -35C Cold start-up Storage temp * Part number -45C to +85C (-49F to +185F) Description RESMLAC 8MG CAPS F35 * * Managed military grade Gigabit switch 8 x 10/100/1000TX For accessories, please consult us. 69 resmlac-28mg NEW Managed military Ethernet switch - 24 Gigabit + 4 combo 10G ports Military ethernet switch for harsh environment - Fully MIL-STD compliant The RESMLAC-28MG is a MIL-STD Fully managed Military-grade network switch offering 24 triple speed (10/100/1000) ports + 4 x 10G fiber ports. The RESMLAC-28MG is compatible with all the newest military industry network protocols for redundant link topology, security, multicast and management requirements. Developed specifically for military and harsh mobile applications, the RESMLAC-28MG features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling, and interface through sealed MIL-D-38999 circular connectors and SCE. Leveraging best-in-class switching technology, the RESMLAC-28MG serves as a robust COTS solution for providing local area network (LAN) connectivity to IP-enabled computing and net-centric devices. Compact in size, the RESMLAC-28MG is particularly useful for expanding port density to tactical IP routers in space-constrained airborne and ground vehicle environments. Military applications n Data acquisition & transmission nBattlefield communication C4ISR n Rugged Networks n Mobile communications nCombat vehicles nAvionic & shipboard systems Amphenol Features n Ethernet ports n Managed 24 x switched 10/100/1000 ports (including 4 Combo ports) + 4x10Gbps Fiber ports - Total of 28 ports. n The 4 Combo ports provide alternative 4 ports 100/1000Base-FX ports n Networking General n Wire-speed hardware-based 28 ports gigabit ethernet switch n Multicasting (IGMP Snooping), GARP, GMRP, MLD and GVRP n Multicast groups up to 8K for both IPv4 and IPv6 n Broadcasting and flooding control up to 8K groups n 802.1q tagged based VLAN up to 4K VLAN groups n Link Aggregation 802.3ad, up to 16 members in group n Link Aggregation mechanism based on L2/ L3/ L4 parameters n Jumbo Frame support up to 10K n WEB, CLI, Telnet Management Quality of service n QoS Multi-Layer Classifier: 802.1p, EtherType, VLAN-ID, IPv4/ 6 DSCP/ ToS, and UDP/TCP ports & ranges traffic classification n Per port WFQ and Strict Queuing scheduling n DSCP remarking for both IPv4 and IPv6 frames n Ingress policer and ingress shaper per port with 500Kbps granularity n Egress shaper per port with 500Kbps granularity n Full-duplex flow control (IEEE802.3X) and half-duplex backpressure, symmetric and asymmetric. 70 Dimensional line drawing ... All measurements are in millimeters BON POUR ACCORD FABRICATION : DATE : Redundancy and ring protection Nom du client : Dimensions du switch COTS donnees a titre indicatif n Spanning tree (802.1d), RSTP (802.1w) and mul+ Programme : tiple Spanning tree (802.1S) for fast recovery rings BON POUR ACCORD FABRICATION : DATE : n RPR for up to 30 units per ring with recovery Nom du client : time <50ms hardware based + Programme : n RPR for up to 30 units per ring with recovery time <50ms hardware n 20-Gbps bandwidth for ring topology n QoS consistency across stack / ring n Mirroring across stack / ring n Link aggregation groups spanning multiple switches in stack/ring NAME PLATE DESSINE PAR : R. DAL BON Le 21/04/2011 DESSINE PAR : Switch R. DALRJSMLAC-2 BON Amphenol CE DOCUMENT EST LA CE PROPRIETE DOCUMENT D'AMPHENOL EST CELA DOCUMENT PROPRIETE SOCAPEX, EST D'AMPHENOL IL LANE PROPRIETE PEUT NI SOCAPEX, ETRE D'AMPHENOL REPRODUIT, IL NE PEUT SOCAPEX, NINICOMMUNIQUE ETRE IL NE REPRODUIT, PEUTANI DES ETRE NITIERS COMMUNIQUE REPRODUIT, SANS AUTORISATION NI A DES COMMUNIQUE TIERSECRITE SANS A DES AUTORISATION TIERS SANSECRITE AUTORISATION ECRITE IMP 006-01 IMP 006-01 IMP 006-01 Security n Security via Radius authentication 802.1x, Port/ MAC access control n Port security n Per port ingress and egress port mirroring n Mirroring per VLAN and per content awareness match n Private VLAN support per VLAN (Isolated and Promiscuous ports) n Content Aware Policers: * 128 Content Aware Policers * 16 Content Aware rate policers with rates from 1fps to 32 million fps * 8 UDP/TCP port range policers * Advanced ACL through hardware based match patterns * Content Aware Policers for generic MAC, ARP, IPv4, IPv6 protocols * No restriction on any mix of entries to Content Aware Policers * Contente Aware Policers actions are permit/deny, police, count, snoop and mirror * Special support for IP fragments, UDP/TCP port ranges and ARP * Extensive CPU DoS prevention * Surveillance functions by Content Aware Policers counters * Multiple ACLs per port for optimal usage Dimensions du switch COTS donnees a titre indicatif of Content Aware Policers ACCORD FABRICATION : DATE : n Storm controllers for flooded broadcast, multi- BON POUR Dimensions du switch COTS donnees a titre indicatif Nom du client : cast and unicast + Programme : Le 21/04/2011 2D : 191 2D : 191 Switch RJSMLAC-2 DESSINE PAR : R. DAL BON Le 21/04/2011 Switch RJSMLAC-2 2D : 191 n Connectors n 2 x Power connector type: MIL-DTL-38999/24WC4P (1 optional) n 24 x LAN connector type: SCE2-B-76A0714SN-001 (4 ports are Gigabit Combo ports 10/100/1000 or 1000FX fiber) n 4 x LAN Fiber connectors type: MIL-D-38999 TVOP n 1 x Serial interface, shared with LAN port #1 n LED indication per Port (Speed, Link/Activity) per Unit (Power A, Power B) 71 n Chassis n Low profile rugged aluminium extrusion n Conductively cooled w/custom internal heat-sinks n Ingress protection against sand, dust and moisture n Anodize coating, MIL-A-8625, Type II, Class 2 n Standards n MIL-STD-1275B, MIL-STD-704A, MIL-STD-461E, MIL-STD-810F GM, IP67 n Support up to 50ms holdup time, and 6VDC drops n Voltage operation n Redundant with load sharing Power Supplies 24VDC, 48VDC, or 90~230VAC n Performance n 96.8 Mbps wire speed forwarding rate n 56 Gbps maximum forwarding bandwidth n 8K MAC address n Power n Exceed MIL-STD-1275B and MIL-STD-704A Surge and Spike protection with 50ms holdup time and 6VDC drops n Voltage input: 24Vdc nominal (18-32V), option for redundant Power supply, 48VDC, and 90~230VAC n Power consumption: 20W typical n Chassis grounding n Electromagnetic n MIL-STD-461E Electromagnetic compatibility n CE-102, CS-114, CS-115, CS-116, RE-102, RS-103 n Shock / Vibration / Humidity n MIL-STD-810F, 501.4I, 501.4II, 502.4I, 502.4II, 507.4, 500.4II, 514, 516I, 516VI, 514.5, 512.4 Amphenol n Physical n Dimensions: 440mm (L) x 200mm (W) x 88(H), including connectors & hardware, 2U, 19" rack n Weight: 5.6 kg n Installation n Set of four 4.5mm mounting holes on bottom for mounting to any flat surface n 19" standard mounting ears n Cooling n No moving parts. Passive cooling. n Operating temp n -35C to +75C (-31F to +167F) / -35C cold start-up n Storage temp n -45C to +85C (-49F to +185F) Description Part number RESMLAC 28MG Options * * Managed military grade Gigabit switch 24 x 10/100/1000TX Consult us for options such as additional ports 4 x Up to 10G Fiber ports For accessories, please consult us. 72 RJSML-8US1 & RJSML-8UG1 unmanaged military Ethernet switch - Fast or Gigabit Military ethernet switch for harsh environment with industrial EMI compliancy Sealed, rugged & unmanaged switch Amphenol offers an unmanaged Ethernet switch with 8 gigabit ports RJSML-8UG1. The switch can withstand a variety of extreme conditions. Whatever the situation - high temperatures, extreme shocks & vibrations, dust particles or even liquid immersion- there is a solution available. The switch electronics are sealed within a waterproof IP68 metallic enclosure. The conductive cadmium plating is suitable for most demanding EMI-RFI environments. Black paint is also offered when RoHS is required (other colors available). The I/O interface includes redundant power inputs as well as waterproof rugged RJ45 connectors from the RJFTV FIELD threaded product series based on MIL-DTL-38999 (Series III) metallic shell size 19. This serie enables the transformation without tooling of any standard RJ45 cordset into a robust and waterproof connection system. Military applications nBattlefield communication C4ISR n Rugged Networks n Mobile communications Key features n Rugged environmental feature nR ugged metal packaging with cadmium or paint protection nM il-DTL-38999 III connectors for both power and Ethernet ports n IP65/IP68 rated when mated n Power filtering and protection (-704 option) * MIL- STD-461E (CE03) 600V spike suppressior * MIL- STD-704A * MIL- STD-1275A * RT CA/DO- 160B n MIL-STD-810F shocks n RTCA/DO- 160C Vibrations n Full-Duplex operation with flow control (no collisions!) n MIL STD 810F altitude 50,000 ft (15,000 m) n Auto-detecting, auto-crossover and auto-polarity n Broadcast storm protection Amphenol nAvionic & shipboard systems n Models 8US1 n8 ports 10/100-BaseT(X) n Wide operating temperature range of -40C to 70C n Models 8UG1 n8 ports 10/100/1000-BaseT(X) n Wide operating temperature range of -10C to 60C n Supports Jumbo frame transmission up to 9kbytes n Models 8UG1-ET n8 ports 10/100/1000-BaseT(X) n Wide operating temperature range of -40C to 70C n Supports Jumbo frame transmission up to 9kbytes 73 IEEE Ethernet standards Models Features RJS XX 8US1 XX Unmanaged - Fast 802.3/u RJS XX 8UG1 XX Unmanaged - Gigabit 802.3x 802.3ab X IEEE 802.3/u 10 Mbps & 100 Mbps fast Ethernet IEEE 802.3x Full-Duplex with flow control IEEE 802.3ab 1000 Mbps Gigabit Ethernet Ethernet features RJ45 Ports 8 shielded RJ45 ports 10/100 BaseT(X) or 1000 Base T(X) Connectors for RJ45 ports RJFTV: jam nut receptacle based on MIL-DTL-38999 III Olive drab cadmium or nickel plated RJ45 speed 10, 100 or 1000 Mbps auto -negotiation Full / Half duplex Automatic MDI/MDIX Auto-crossover Environmental specifications Amphenol Safety UL 60950-1, CAN/CSA-C22.2 No.60950 EMI emissions U.S.A.: FCC Part 15 CISPR 22 U.E. EN55011, EN61000-6-4, EN55022 Class A, EN61000-3-2/3, EN55024, IEC61000-4-2/3/4/5/6/8, EN61000-6-2 Shocks MIL-STD-810F: 40g, 11 ms, 18 saw tooth shocks Vibrations RTCA/DO-160C sinusoidal vibrations 5-55 Hz: 0.01 inch: 55-500 Hz : 1.5 g Altitude MIL-STD-810F: 50.000 ft - 15.000 m Temperature Operating models 8UG1: -10C to +60C models 8US1: -40C to +70C models 8UG1-ET: -40C to + 70C Storage all models: -40C to +85C Weight approx 2.8 kg Power supply Input voltage 8US1, 8UG1, & 8UG1-ET: 12-48 VDC, redundant power input (P1 and P2) 8US1-704 & 8UG1-704: 12-33 VDC, single power input (P1 only) 8US1-PSM & 8UG1-PSM: 85-264 VAC single power input Input power 5 W max Connectors for power MIL-DTL-38999 III jam nut receptacle, olive drab cadmium or nickel plated 1 connector TVx07xx0935P: 6 cts # 22D (wire 0.38 mm2 maxi) "OK" contact output Sourcing power ; maximum current: 1 A @ 24VDC Not available for -704 and -PSM options Additional power protection for models MG7F3G-704 (option-704) 74 MIL-STD-461E CE102 conducted emission DEF-STAN-59-41 DCE01/DCE02 DEF-STAN-61-5 Pt 6 MIL-STD-704A 600V input transient, applied for 10us MIL-STD-1275A Spikes: +/- 250 V for 100us Surges: 100 V for 50 ms at 0.5 mohm Ripple: 14VAC pk-pk Description 1 IP68 aluminium enclosure with cadmium conductive plating or black paint (RoHS) 2 Redundant power inputs 3 Balance pressure vent 4 8 rugged IP68 RJF TV Ethernet ports 5 Fixture for vertical mounting 1 2 3 Optional caps available 4 IMPORTANT NOTE This model has no LED indicator. 5 Description (in mm) 69 260 Amphenol 181 160 199 240 23 64 24 11 8,5 36,5 Maxi 90 6 Pin-out for the power connector P2- P1- P1- N P2+ P1+ P1+ L OK (3&6) 8US1, 8UG1, & 8UG1-ET P1 and/or P2: 12-48 VDC 8US1-704 & 8UG1-704 P1: 12-33VDC 3, 4, 5, 6: not connected 8US1-PSM & 8UG1-PSM L: 85-264 VAC 3, 4, 5, 6: not connected 75 Part number code Series RJS ML 8US1 - - - Type of Enclosure ML: MIL-DTL-38999 (series III) Receptacles, OD Cadmium Plating BKN: RAL 9005 (Jet black) Paint on Aluminium box, Nickel plated 38999 (series III) Receptacles, ROHS compliant Type of Electronics 8US1: unmanaged 8 ports 10/100 Base T(X), wide temperature range 8UG1: unmanaged 8 ports 10/100/1000 Base T(X) 8UG1-ET: unmanaged 8 ports 10/100/1000 Base T(X), wide temperature range Optional: transient suppression module; 600V spike suppressor (Blank): no transient suppression module 704: switch equiped with additional transient suppression module Optional: AC power supply (Blank): DC powered PSM: switch powered with 85-264 VAC instead of DC power Optional: Caps for receptacles fixed with cord directly to the receptacle (Blank): no caps included. The Ethernet ports are still sealed but the contacts are not protected. CAPS: attached caps for both power and data included Example: RJS ML 8UG1 704 CAPS: unmanaged switch in an aluminum enclosure with olive drab green conductive cadmium plating, 8 gigabit ports, RJFTV threaded coupling receptacles, additional transient suppression module, caps are added to the switch Remark: All BKN Ethernet switches and nickel plated accessories are RoHs compliants. -704- and -PSM- options can not be selected together. With the -704- option, a filter module is included inside the switch allowing to meet MIL-STD-461 and other aircraft standards. With the -CAPS- option, all the receptacles come pre-equipped with a cap. Accessories Amphenol Plugs for Ethernet ports RJF TV 6 M G: cadmium OD plating RJF TV 6 M N: nickel plating Based on MIL-DTL-38999 No tool required !!! Plugs for I/O ports: MIL-DTL-38999, cadmium plated, crimp contacts Two plugs (6 cts # 22D) TV 06 RW 0935 S: cadmium OD plating TV S06 RF 0935 S: nickel plating Caps for Ethernet ports RJSML C7G: cadmium OD plating RJSML C7N: nickel plating A simple screwdriver is needed! Backshells for I/O plugs We suggest to use MIL-DTL-38999 III backshells. Consult the dedicated catalog (E118) for details. Examples: TVNSA 09 014 : shielding backshell, cadmium OD plating TVNSA 09 023: shielding backshell, nickel plating + 804221 straight heat shrink for sealing Example: RJS ML 8UG1 704 CAPS with an RJSML 8UG1 704 CAPS switch, we suggest to use hereafter accessories: RJF TV 6 M G (up to 8) for Ethernet ports TV 06 RW 0935 S + TVNSA 09 014 + 804221 for power port 76 RJSML-MG7F3G Managed military Ethernet switch - 7 fast ports + 3 Gigabit ports Military ethernet switch for harsh environment with industrial EMI compliancy Sealed, rugged & managed switch Amphenol offers a 10 ports managed Ethernet switch RJSML-MG-7F3G. Note: this model replaces the RJSML-9MG1 and the RJSML-9RG1. The switch can withstand a variety of extreme conditions: whatever the situation - high temperatures, extreme shocks and vibrations, dust particles or even liquid immersion there is a solution available. The switch electronics are sealed within a waterproof IP68 metallic enclosure. The conductive cadmium plating is suitable for most demanding EMI-RFI environments. Black paint is also offered when RoHs is required (others colors available). The I/O interface includes redundant power inputs as well as waterproof rugged RJ45 connectors from the RJF TV FIELD threaded product series based on MIL-DTL-38999 (Series III) metallic shell size 19. This serie enables the transformation without tooling of any standard RJ45 cordset into a robust and waterproof connection system. Military applications n Data acquisition & transmission nBattlefield communication C4ISR n Rugged Networks n Mobile communications nTest equipment Key features n Rugged environmental feature nR ugged metal packaging with cadmium or paint protection nM il-DTL-38999 III connectors for both power and Ethernet ports n IP65/IP68 rated when mated n Power filtering and protection (-704 option) * MIL-STD-461E (CE03) 600V spike suppressior * MIL-STD-704A * MIL-STD-1275A * RTCA/DO-160B n MIL-STD-810F shocks n RTCA/DO- 160C Vibrations n Wide operating temperature range of -40C to 70C n MIL-STD-810F Altitude 50,000 ft 15,000 m Amphenol nAvionic & shipboard systems n Ethernet features n3 ports 10/100/1000-BaseT(X) + 7 ports 10/100-BaseT(X) n Full-Duplex operation with flow control (no collisions!) n Auto-detecting, auto-crossover and auto-polarity n MIL-STD-810F shocks n RSTP for redundant rings n QoS and CoS priority queuing n SNMPv3 authentication and encryption n IGMP for multicast filtering n VLAN for trafic segregation n And much more ! 77 IEEE Ethernet standards Models Features RJS XX MG 7F3G XX Managed - Gigabit IEEE 802.3/u 802.3/u 802.3x 10 Mbps & 100 Mbps fast Ethernet 802.3z IEEE 802.1p 802.1p 802.1D 802.1w Priority queuing - QoS, CoS, ToS/DS IEEE 802.3x Full-Duplex with flow control IEEE 802.1D/w Rapid spanning tree for redundant rings IEEE 802.3ab 1000 Mbps Gigabit Ethernet IEEE 802.1Q VLAN for traffic segregation Ethernet features RJ45 ports 10 shields RJ45 ports 10/100 BaseT(X) or 1000 Base T(X) Connectors for RJ45 ports RJFTV: jam nut receptacle based on MIL-DTL-38999 III Olive drab cadmium or Nickel plated RJ45 speed 10 or 100 Mbps auto -negotiation Typical latency 16 us + frame time @ 10 Mbps (varies on load and settings) 5 us + frame time @ 100 Mbps Full / Half Duplex Automatic or configurable RJ45 MDI/MDIX Auto-crossover RJ45 TD and RD polarity Auto-polarity MAC addresses supported 8192 Memory bandwidth 32 Gbps (gigabit) ; 3.2 Gbps for all other models Ethernet isolation 1500 Vrms 1 minute Ring features Link loss recovery time: 30 ms plus 5 ms per hop (for Ring model only) Maximum switches in ring: 50+ Dual Ring support Environmental specifications Amphenol EMI emissions EN55022 class A, FCC part 15, IC ES-003 EMC immunity IEC61326-1, IEEE C37.90 Shocks MIL-STD-810F: 40g, 11ms, 18 saw tooth shocks Vibrations RTCA/DO-160C sinusoidal vibrations 5-55 Hz: 0.01 inch ; 55-500 Hz: 1.5 g Altitude MIL-STD-810F: 50.000 ft - 15.000 m Temperature Operating -40C to +70C Storage -40C to +85C Weight approx 2.8 kg Power supply Input voltage MG7F3G: 10-30 VDC, redundant power input (P1 and P2) MG7F3G-704: 10-30 VDC, single power input (P1 only) MG7F3G-PSM: single power input AC or DC - AC voltage: 85-264 VAC/Frequency 47-63 Hz - DC voltage: 120-370 VDC Input power 5 W typical (all ports active) Connectors for power MIL-DTL-38999 III jam nut receptacle, olive drab cadmium or nickel plated 1 connector TVx07xx0935P: 6 cts # 22D (wire 0.4 mm2 maxi) "OK" contact output Sourcing power ; Maximum current : 0.5 A MG7F3G: ON if P1 and P2 have power and switch software is running MG7F3G-704: ON when software is running MG7F3G-PSM: ON when software is running; output power: 24VDC Additional power protection for models MG7F3G-704 (option-704) 78 802.1Q MIL-STD-461E CE102 Conducted emission DEF-STAN-59-41 DCE01/DCE02 DEF-STAN-61-5 Pt 6 MIL-STD-704A 600V input transient, applied for 10us MIL-STD-1275A Spikes: +/- 250 V for 100us Surges: 100 V for 50 ms at 0.5 mohm Ripple: 14VAC pk-pk Description IP68 aluminium enclosure with cadmium conductive plating or black paint (RoHS) 1 2 Redundant power inputs 3 Balance pressure vent 4 10 rugged IP68 RJF TV Ethernet ports 5 Fixture for vertical mounting 6 Optional caps available 1 2 4 3 5 IMPORTANT NOTE This model has no LED indicator. Management is done through a web browser 6 Description (in mm) Amphenol 181 240 160 23 260 199 69 24 64 11 36,5 Maxi 8,5 90 6 Pin-out for the power connector N NC L MG7F3G P1 and/or P2: 10-30 VDC MG7F3G-PSM L: 85-264 VAC NC: Not connected 79 Part number code Series RJS ML MG7F3G - - Type of Enclosure ML: MIL-DTL-38999 (series III) receptacles, OD Cadmium plating BKN: RAL 9005 (jet black) paint on aluminium box, nickel plated 38999 (series III) receptacles, ROHS compliant Type of Electronics MG7F3G: managed 6 ports 10/100 Base T(X) + 3 ports 10/100/1000 Base T(X) Optional: transient suppression module; 600V spike suppressor (Blank): no transient suppression module 704: switch equiped with additional transient suppression module Optional: AC power supply (Blank): DC powered PSM: switch powered with 85-264 VAC instead of DC power Optional: Caps for receptacles fixed with cord directly to the receptacle (Blank): no caps included. The Ethernet ports are still sealed but the contacts are not protected. CAPS: attached caps for both power and data included Example: Remark: RJS ML MG7F3G 704 CAPS Managed switch in an aluminium enclosure with olive drab green conductive cadmium plating, 7 ports 10/100 Base T(X) + 3 gigabit ports, RJF TV threaded coupling receptacles, additional transient suppression module, caps are added to the switch. All BKN Ethernet switches and nickel plated accessories are RoHs compliants. 704 and PSM options can not be selected together. With the -704 option, a filter module is included inside the switch allowing to meet MIL-STD-461 and other aircraft stan dards. With the -CAPS option, all the receptacles comes pre-equipped with a cap. Accessories Amphenol Plugs for Ethernet ports RJF TV 6 M G: cadmium OD plating RJF TV 6 M N: nickel plating Based on MIL-DTL-38999 No tool required !!! Caps for Ethernet ports RJSML C7G: cadmium OD plating RJSML C7N: Nickel plating A simple screwdriver is needed! Plugs for I/O ports: MIL-DTL-38999, cadmium plated, crimp contacts Two plugs (6 cts # 22D) TV 06 RW 0935 S: cadmium OD plating TV S06 RF 0935 S: nickel plating Example : 80 RJS ML MG7F3G 704 CAPS Backshells for I/O plugs We suggest to use MIL-DTL-38999 III backshells. Consult the dedicated catalog (E118) for details. Examples: TVNSA 09 014 : shielding backshell, cadmium OD plating TVNSA 09 023: shielding backshell, nickel plating + 804221 straight heat shrink for sealing With a RJSML MG7F3G 704 CAPS switch, we suggest to use hereafter accessories : RJF TV 6 M G (up to 10 ) for Ethernet ports TV 06 RW 0935S + TVNSA 09 014 + 804221 for power ports - ROHS compliant rjspc Unmanaged or ring industrial Ethernet switch - 5 fast ports Industrial ethernet switch for harsh environment Rugged & waterproof switch Amphenol offers a small size 5 ports waterproof Ethernet switch that can withstand a variety of extreme conditions - low & high temperatures, shocks & vibrations, dust particles or even liquid immersion. This is an easy way to make the Ethernet networks of your manufacturing site, automation or control units deterministic. Amphenol IP68 industrial ring switch Amphenol IP68 ring Ethernet switch is a combination of very fast, fault-tolerant network redundancy Sixnet technology and IP68 sealed & rugged packaging, specifically designed for the harshest environments. Rings self-configure and just run, without any complex configuration. The switch board is sealed within a waterproof IP68 polyester enclosure suitable for highly corrosive environments. The polyester material is glass fiber reinforced. This makes it very rugged against shocks and vibration. The I/O interfaces are waterproof & rugged RJ45 connectors from the RJ FIELD plastic circular series. Industrial applications nFactory automation n Robotics n Process control nTransportation systems n Data acquisition & transmission Key features Amphenol n Ring switch networking features (managed features available!) nR eal-Time ring for ultra-fast fault-tolerant loops * recovery time of 30 ms + 5 ms per hop! nM odbus monitoring over Ethernet * ideal for deterministic systems and PLCs nR eal-time traffic prioritization (QoS and CoS) * assure delivery of real-time data * improve network utilization * user settable priority assignments n Advanced switch features * user configurable port settings * port mirroring for traffic diagnostics * pre-configurable for Plug-And-Play simplicity Note: for ATEX version, see page 138. LEDs indicating activity, link status, datarate (10/100 Mbps) LED indicating ring status 5 rugged IP68 RJ Field Ethernet ports Real-time ring feature IP68 polyester enclosure reinforced with glass fiber OK power & ring status LEDs indicating power Redundant power inputs OK contact output 81 IP68 UNMANAGED & RING SWITCH FEATURES IEEE Ethernet standards IEEE 802.3 10 Mbps Ethernet IEEE 802.3u 100 Mbps Fast Ethernet IEEE 802.3x Full-Duplex with Flow Control IEEE 802.1p standard QoS/CoS - Quality/Class of service for ring model only Regulatory approvals EMI emissions EN55022, FCC part 15, ICES-003 EMC immunity IEC61326-1, IEEE C37.90 Shocks IEC60068-2-27 Vibrations IEC60068-2-6 Free Fall IEC60068-2-32 Ethernet features Ports 5 shielded RJ45 ports 10/100BaseTX Ethernet switch type Intelligent store & forward Full / Half Duplex Configurable RJ45 speed 10 or 100 Mbps auto-negotiation Amphenol RJ45 MDI/MDIX Auto-crossover connection RJ45 TD and RD polarity Auto-polarity Typical latency 16 us + frame time @ 10 Mbps (varies on load and settings) 5 us + frame time @ 100 Mbps MAC addresses supported 2048 Memory bandwidth 3.2 Gbps Ethernet isolation 1500 Vrms 1 minute Ring features Link loss recovery time: 30 ms plus 5 ms per hop (for Ring model only) Maximum switches in ring: 50+ Dual ring support Power supply Input power (typical) ES: 2,4 W ; RS: 2,7 W Redundant inputs 10-30 VDC; 10-50 VDC for EP models Status reporting (for ring model only) "OK" contact output Output current: 0.5 A max "OK" contact State OFF when a fail occurs ON when power and switching is OK Environmental 82 Operating temperature - 40C to +75C Storage temperature - 40C to +85C Weight 0.54 kg Real-Time ring switches Amphenol Real-Time ring switches combines the Plug&Play simplicity of an unmanaged switch with high performances of Sixnet Ring managed switches. n Real-Time fault-tolerant Ring Recovery time of 30 ms + 5 ms per hop! n Real-Time traffic prioritization (QoS & CoS) Assure delivery of real-time data nAvailable Managed features User configurable port settings Port mirroring for traffic diagnostics Pre-configurable for Plug & Play simplicity The use of such switches provides a fast network and avoids faults. When a break occurs, the switch instantly transfers data to new path. The link loss recovery is 30 ms plus 5 ms times the number of Ring switches in the ring. For example, 10 ring switches will recover in less than 80 ms. Rings can be pre-configured to "just run". They don't need an assigned IP address. But if you like, you can fine tune the performance of the ring by using a simple Windows wizard (which is free). Ring networks can be divided into multiple "sub-rings" which enhance reliability and recovery speed through small ring paths. The prioritization of messages assures delivery of real-time data. Some applications need to force no-real-time data (such as video information) to lower priority and force critical real-time data at higher priority. Network utilization is improved. This combination of Ethernet technology associated with rugged and sealed protective enclosure is the ideal solution to deliver deterministic performance to your industrial systems even in the harshest environment! Amphenol Dimensions (mm/inch) 75.4 [2.968] 75 [2.953] 190 [7.48] 107.6 [4.236] 83 Part number code RJS-PC Series IP68 RJ-Switch, with polyester body 5ES 1 PWR Type of electronics 5RS: 5 ports 10/100 Mbps, Ring switch 5ES: 5 ports 10/100 Mbps, Unmanaged switch Connectors 1: RJ45 ports, 10/100BaseT(X) 1CAPS: caps are attached on both power and data receptacles Type of plug PWR: plug for power port included Blank: plug for power port not included (to be ordered as accessory) Military rated protection Blank: Industrial protection (standard order) EP: extended power protection exceeds MIL-STD-1275 (special order) Example: IP68 Ethernet ring switch, 5 ports 10/ 100 Mbps, with caps attached on the receptacles, plug for power port included: RJS-PC-5RS-1CAPS-PWR Note: the Ring model is pre-set for 1 ring enabled on the ports 4 and 5. You may change the configuration by using the free windows configuration tool. Simply choose the desired pair of ports for your new enabled ring. Accessories n P/N: RJF PC5 PWR Plug for power port Sealing protection: IP68 Amphenol 84 Nota: this accessory is already included in the part number with -PWR FREE W INDO Downlo WS Configur ad it at w a ww.rjsw tion tool itch.com n P/N: RJF RB 6 Plug for RJ45 ports Sealing protection: IP68 Rugged USB Solutions USB3.0 & USB2.0 NEW table of contents NEW USB3.0 USB3FTV (USB-A) ............................................................................................................................................................................................................................ USB3F TV - Transversally sealed receptacles ........................................................................................................................................ USB3F TV - Hermetic receptacles ............................................................................................................................................................. USB3 receptacle with Self Closing Cap ................................................................................................................................................. Metallic Self Closing Cap (SCC) for USB3F TV square flange receptacles .................................................................................. High reliability USB 3.0 cordsets .............................................................................................................................................................. 86 90 93 94 95 96 Amphenol Field installable USB2.0 USBFTV (USB-A) .............................................................................................................................................................................................................................. 97 USBF TV - Transversally sealed receptacles .......................................................................................................................................... 100 USBF TV Hermetic receptacles ................................................................................................................................................................... 102 USBFTV - Receptacles with 360 EMI backshells ................................................................................................................................ 103 USBF TV Through bulkhead ....................................................................................................................................................................... 104 USBF TV Stand off receptacles .................................................................................................................................................................. 105 USBF TV 2.0 receptacle with Self Closing Cap (SCC) ......................................................................................................................... 107 Metallic Self Closing Cap (SCC) for USBF TV square flange receptacles .................................................................................... 108 High reliability USB 2.0 cordsets ............................................................................................................................................................. 109 USBF SC - Quick release series ................................................................................................................................................................. 110 USBBF TV (USB-B) .......................................................................................................................................................................................... 112 USBBF TV Stand off receptacles .............................................................................................................................................................. 115 USBBF TV - Transversally sealed receptacles ...................................................................................................................................... 117 USBB receptacle with Self Closing Cap ................................................................................................................................................ 118 Metallic Self Closing Cap (SCC) for USBB square flange receptacles .......................................................................................... 119 Special USB adaptor for Military & Commercial Aeronautics ......................................................................................................... 120 85 ROHS NEW 3.0 USB3F TV (USB-A) compliant N & BZ USB USB connection system for harsh environment With USB Field, you can insert a standard USB 3.0 cordset into a metallic plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling and grounding! Also available a version including plug + cordset: see next page. This metallic plug is connected into a receptacle, using a Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with antidecoupling device for high vibrations. Main characteristics Applications nEmbedded computers nData acquisition and transmission in harsh environment n Railways nBattelfield communication systems nNavy systems Data transmission USB specification 3.0 Data rate: up to 5Gb/s for high speed USB Amphenol eed Datasp r he 10 x hig 0 SB2. than U nSealed against fluids and dusts (IP68) nShock, vibration and traction resistant nNo cabling operation in field and no tools required n Improved EMI protection n T ri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device - Shell size 15 n2 mechanical coding / polarization possibilities (receptacle insert rotation) n USB3F TV plug retention in the receptacle: 100 N in the axis n Mating cycles: 500 minimum Environmental protection n Sealing (when mated): IP68 (temporary immersion) n Salt spray: 48 h with nickel plating > 500 h with olive drab cadmium 500 h with marine bronze shell n Fire retardant / low smoke: UL94 V0 and NF F 16 101 & 16 102 n Vibrations: 10 - 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s n S hocks: IK06: weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair) n Humidity: 21 days, 43C, 98% humidity n Temperature range: - 40C / +85C Part number code: plug and receptacles without cordset. Series USB3 Field TV USB3F TV Shell type 6: plug (without cordset) - For cordset solution, see page 88. 2: square flange receptacle with female USB3.0 termination - For cordset solution, see page 90. 7: jam nut receptacle with female USB3.0 termination - For cordset solution, see page 90. Coding (for receptacle only) A or B Shells material & finish G: aluminium shell - olive drab cadmium plating N: aluminium shell - nickel plating - ROHS compliant Examples: - plug, olive drab cadmium plating: USB3F TV 6 G - jam nut receptacle, coding B, nickel plating: USB3F TV 7 B N Plug without cordset nShell type 6 Part number type: USB3 FTV 6 x Nota: assembling instructions on page 89 86 2 A G Receptacles nSquare flange receptacle 4 mounting holes - Shell type 2 Part number type: USB3 FTV 2 x Panel Drilling Main key Main key Coding A Coding B Amphenol n Jam nut receptacle Hexagonal nut mounting - Shell type 7 Part number type: USB3 FTV 7 x Panel Drilling Main key Coding A Main key Coding B Configuration use For PC to peripheral application, use a crossed USB3 cable CROS type in the part number code RECEPTACLE IS CROSSED For PC to PC application, use a straight USB3 cable STR type in the part number code RECEPTACLE IS CROSSED 87 Part number code: plugs with cordset. USB3F TV Series USB3 Field TV 6 A 03 Shell type 6: plug (with cordset) Coding A or B Cordset length 03: 0.3 m [11.81 inches] 05: 0.5 m [19.68 inches] 10: 1 m [39.37 inches] 15: 1.5 m [59.05 inches] Shells material & finish G: aluminium shell - olive drab cadmium plating N: aluminium shell - nickel plating - ROHS compliant Type of cable * CROS: high reliability USB3 cable crossed STR: high reliability USB3 cable straight OPEN: high reliabilty USB3 cable open no plug at the end' Examples: * IMPORTANT NOTE * for PC to PC application, use a "CROS" type of cable * for PC to peripheral application, use a "STR" type of cable See Configuration use on page 87 - plug, coding B, with 0.5m length of high reliability USB3 cable crossed, nickel plating: USB3F TV 6 B 05 N CROS - plug, coding A, with 1m length of high reliability USB3 cable straight, olive drab plating: USB3F TV 6 A 10 G STR - plug, coding B, with 0.3m length of high reliability USB3 OPEN, nickel plating: USB3F TV 6 B 03 N OPEN Plug with reinforced USB3.0 cordset nShell type 6 Part number type: USB3 FTV 6 x xx x CROS USB3 FTV 6 x xx x STR Amphenol Plug with open reinforced USB3.0 cable nShell type 6 Part number type: USB3 FTV 6 x xx x OPEN 2 codings available for plugs Main key Coding A 88 Coding B G STR Assembly instructions Can be used with most the USB3.0 cordset brands : No tools required! Plug assembly 1. Insert the USB3 cordset into the metallic backshell 2. Insert the retention spacer laterally to the cable (this spacer is soft, in order to adapt to different shapes of overmolding) and slide the overmolding of the USB3-A plug into this retention spacer 3. Insert the friction ring laterally to the cable 1 2 3 4 5 6 4. Choose the right coding (2 positions) and insert the USB-A plug into the protective plug.Note at this step, the main key is used for polarization through the blue seal. 7. Screw the backshell on the plug body. A wrench can be necessary to fully tighten it, and the connection to the receptacle can help IMPORTANT NOTE USB3 cordset usable - Not provided Amphenol The sealing is done by the blue seal. Accessories n Metallic caps USBF TVC 2 G Connector type 6: plug 2: square flange receptacle 7: jam nut eceptacle Shells material & finish N: aluminium shell - nickel - ROHS compliant G: aluminium shell - olive drab cadmium BZ: marine bronze shell - ROHS compliant n P anel gasket for square flange receptacle Thickness: 0,8 mm [.031] P/n: JE15 89 ROHS NEW 3.0 USB3F TV (USB-A) compliant N & BZ USB Transversally sealed receptacles In some applications, a transversal sealing for the receptacle is a must . This will prevent fluids and dust from going through the receptacle when plug or cap are not mated to the receptacle. The sealed solution (version "S") has a compound at the rear of the receptacle below. In addition, the Sealed USB3F TV has been successfully tested in very high vibration corresponding to airplane applications. Main characteristics Applications nEmbedded computers nData acquisition and transmission in harsh environment n Railways nBattelfield communication systems nNavy systems Amphenol Data transmission USB specification 3.0 Data rate: up to 5Gb/s for high speed USB nSealed against fluids and dusts (IP68) nShock, vibration and traction resistant n No cabling operation in field and no tools required n Improved EMI protection n Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device - Shell size 15 n 2 mechanical coding/polarization possibilities by the user (receptacle insert rotation) n USB3F TV plug retention in the receptacle: 100 N in the axis n Mating cycles: 500 minimum Environmental protection n Sealing (when mated): IP68 (temporary immersion) n Salt spray: 48 h with nickel plating > 500 h with olive drab cadmium 500 h with marine bronze shell n Fire retardant / Low smoke: UL94 V0 and NF F 16 101 & 16 102 n Vibrations: 10 - 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s n Shocks: IK06 weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair) n Humidity: 21 days, 43C, 98% humidity n Temperature range: - 40C / +85C Part number code Series USB3 Field TV USB3F TV 2 S A 03 G Shell type 2S: square flange receptacle 7S: jam nut receptacle Coding A or B USB cable length 03: 0.3 m [11.81 inches] 05: 0.5 m [19.68 inches] 10: 1 m [39.37 inches] 15: 1.5 m [59.05 inches] Shells material & finish G: aluminium shell - olive drab cadmium plating N: aluminium shell - nickel plating - ROHS compliant Type of cable * ACROS: high reliability crossed USB3 cable with plug at the end ASTR: high reliability straight USB3 cable with plug at the end OPEN: high reliability cable open = no plug at the end Examples: 90 * IMPORTANT NOTE * for PC to PC application, use a "CROS" type of cable * for PC to peripheral application, use a "STR" type of cable See Configuration use on page 87 - square flange receptacle, with 0.5m length of high reliability USB3 cable crossed, coding B, nickel plating: USB3F TV 2 S B 05 N ACROS - jam nut receptacle, with 1m length of high reliability USB3 cable straight, coding A, olive drab cadmium plating: USB3F TV 7 S A 10 G ASTR - jam nut receptacle, with 0.3m length of high reliability USB3 cable open, coding B, olive drab cadmium plating: USB3F TV 7 S B 03 G OPEN STR Receptacles with USB-A cordset n Square flange receptacle 4 mounting holes: shell type 2 Part number: USB3 FTV 2 S x xx x ACROS USB3 FTV 2 S x xx x ASTR Main key Main key Panel drilling Coding B Coding A Amphenol n Jam nut receptacle hexagonal nut mounting: shell type 7 Part number: USB3 FTV 7 S x xx x ACROS USB3 FTV 7 S x xx x ASTR Main key Main key Panel drilling Coding A Coding B 91 Receptacles with open reinforced USB3.0 cable n Square flange receptacle - 4 mounting holes: shell type 2 Part number type: USB3F TV 2 S A xx x OPEN Panel drilling n Jam nut receptacle hexagonal nut mounting: shell type 7 Part number type: USB3F TV 7 S A xx x OPEN Panel drilling Amphenol 92 NEW USB3F TV ROHS compliant N & BZ Hermetic receptacles In some applications, a transversal hermiticity for the receptacle is a must . This will prevent gas from going through the receptacle when plug or cap are not mated to the receptacle. The hermetic solution (version "H") has a compound at the rear of the receptacle. Helium leakage is less than 1.10-6 cm3 per second [0.1 micron cubit ft per hour] at one bar [15 psi] pressure differential. Applications Main characteristics nEmbedded computers nData acquisition and transmission in harsh environment n Railways nBattelfield communication systems nNavy systems nSame as the USB3F TV (see page 76)... a complete IP68 sealing of the receptacle is added (even with no plug or no protective cap mated). nOutside dimensions are the same as the standard USB3F TV (USB-A). n Vibrations : the compounded version of the USBF TV has been tested in vibration following the NAS 1599 aeronautic specification (ambient temperature): 5 - 3000 Hz, 20g, 2.5 mm [.1 inch] double amplitude, 3 axes, 12 hours Note: this specification exceeds MIL-C-26500 requirements. Data transmission USB specification 3.0 Data rate: up to 5Gb/s for high speed USB IMPORTANT NOTE Due to the compound, the coding of the connector must be done in the factory: use the codes A or B in the part number. Example: USBF3TV 2H A 03 G ACROS Coding B Amphenol Coding A A coding Main key Main key B coding Same for jam nut receptacle. Part number code Series USB3 Field TV USB3F TV 2 H A 03 G STR Shell type 2H: square flange receptacle 7H: jam nut receptacle Coding A or B USB cable length 03: 0.3 m [11.81 inches] 05: 0.5 m [19.68 inches] 10: 1 m [39.37 inches] 15: 1.5 m [59.05 inches] Shells material & finish G: aluminium shell - olive drab cadmium plating N: aluminium shell - nickel plating - ROHS compliant Type of cable * ACROS: high reliability crossed USB3 cable with plug at the end ASTR: high reliability straight USB3 cable with plug at the end OPEN: high reliability cable open = no plug at the end Examples: * IMPORTANT NOTE * for PC to PC application, use a "CROS" type of cable * for PC to peripheral application, use a "STR" type of cable See Configuration use on page 87 - square flange receptacle, with 0.5m length of high reliability USB3 cable crossed, coding B, nickel plating: USB3F TV 2 H B 05 N ACROS - jam nut receptacle, with 1m length of high reliability USB3 cable straight, coding A, ODC plating: USB3F TV 7 H A 10 G ASTR - jam nut receptacle, with 0.3m length of high reliability USB3 cable open, coding B, ODC plating: USB3F TV 7 H B 03 G OPEN 93 NEW USB3 Receptacle with Self Closing Cap This Self Closing Cap automatically protects the USB3 square flange receptacles (MIL-C-26482 type), protecting your system from dust and water projections. A spring automatically closes the upper part of the cap when either the USB or USB key are removed from the receptacle. IP54 l e v e l ling ) Sea t Proof d dus lash an (Sp ROHS compliant N&B USB3F 21 X SCC Amphenol Version: USB-A (front and back termination) Plating Part number * Metallized inserts (EMI) USB3F 2B SCC Black coated No USB3F 2N SCC Nickel plated Yes USB3F 2G SCC Olive drab cadmium plated Yes * The part number includes the receptacle + the self closing cap nNote: Panel gasket with any of these receptacles: JE18 RJF 21 X SCC, USBF 21 X SCC, USBBF 21 X SCC, & IEEE1394 RJ45 version (see page 25) 94 USB2.0-A version (see page 107) USB-B version (see page 118) IEEE1394 version (see page 143) Metallic Self Closing Cap (SCC) For USB3F TV square flange receptacles. This Self Closing cap automatically protects the USB3F TV (type A) square flange receptacles (MIL-DTL-38999 type), protecting your system from dust and water projection. A spring automatically closes the upper part of the cap when the USB plug is removed from the receptacle. Sealing 29,5 [ 1,1614 ] 18 O25,3 [ 0,996] 31 [ 1,2205 ] IMPORTANT NOTE Metal Self Closing caps are sold separately (without receptacle). Green Nickel Plating Black Amphenol 24,61 [ 0,969 ] 47,5 [ 1,8701 ] 30,9 [ 0,2165 ] 24,61 [ 0,969 ] 4- O 3,25 [ 0,128 ] Part number [ 0,7087 ] level IP67 40 [ 1,5748 ] P/N Black - ROHS compliant USBFTVSCCB Nickel - ROHS compliant USBFTVSCCN Olive drab cadmium USBFTVSCCG Remark: also compatible with USBFTV 2.0 (type A) & USBBFTV (type B) square flange receptacles. USBFTV2XX (see page 106) USBBFTV2XX (see page 110) nPanel gasket for square flange receptacle (thickness: 0,8 mm [.031]): Part number: JE15 95 ROHS NEW compliant High Reliability USB 3.0 Cordsets General construction: this is a USB-3.0 cable containing two 28 AWG 90 USB3.0 parallel shielded pair, one 28 AWG USB2.0 pair, and two 24 AWG power conductors, overall SFTP shields (SFTP = double shielding, braid and foild), jacketed in black UV resistant Polyurethane HFFR*. Designed for fixed or portable applications in industrial and harsh environments. *HFFR: Halogen Free Flame Retardant. Jacket compound specification: Halogen Free Flame Retardant Polyether-based Polyurethane. Glossy finish. Excellent hydrolysis resistance. High microbial resistance. UV resistant. High flexibility. Applications n Robotics n Motion control electrical CHARACTERISTICS n Railways nCNC machines nBattelfield communication n Industrial process Conductor resistance 210 Ohm/km Insulation resistance 200 MOhm/km Capacitance (1 kHz) nom. 43 nF/km AWG) Time delay nom. 5.0 ns/m DATA INSULATION 1 mm nom Time delay skew 150 ps/10m COLOR DATA PAIR Green & white (USB2.0) Operating voltage (peak) 100 V Yellow & blue, orange & violet (USB3.0) Impedance 90 7 Ohm POWER CONDUCTORS Tinned copper, 7/0.2 mm (24 AWG) Test voltage 500 V physical CHARACTERISTICS DATA CONDUCTORS Tinned stranded copper, 7/0.13 mm nom (28 Amphenol POWER INSULATION 1.1 mm nom USB2.0 Pair COLOR POWER WIRE Red & Black Electrical requirements acc. to USB2.0 SHIELDS USB 3.0 pair: foil + stranded tinned copper drain wire. Overall: foil + shield braiding of tinner copper wires (coverage 85%). Impedance 90 15 Ohm Test voltage 500 V JACKET PU compound USB3.0 pair-db/10m USB2.0 pair-db/100m COLOR JACKET Black 625 MHz 10 1 MHz 4 WEIGHT 31 lbs/1000ft (46 kg/km) 1250 MHz 15 4 MHz 7.8 OUTSIDE DIAM. 0.20 inch (5.7 mm nom. +/- 0.2) 2500 MHz 25 8 MHz 11.4 MIN BEND RADIUS (During operation) 57 mm (10 x O. D.) 5000 MHz 36 12 MHz 13.4 MIN BEND RADIUS (During installation) 28.5mm (5 x O.D.) 7000 MHz 47 24 MHz 19 48 MHz 27 96 MHz 38 200 MHz 64 400 MHz 116 TEMPERATURE installation & Plus 85C, minus 40C operational IMPORTANT NOTE for PC to PC application, use a CROSSED cable for PC to peripheral application use a STRAIGHT cable see page 87 UNDER USB3 specification 1.8 m out of USB3 specification >1.8 m 96 USB3.0 Parallel pair Attenuation Datas only le alone g) b a for c lu p t USB (withou Cordsets with a USBA plug overmolded on each end Length (m/ft) CROSSED wiring part number Black overmolding STRAIGHT wiring part number Blue overmolding 0.5 m / 1.64 ft USB 3 A A CROSSED 50 PU HFFR USB 3 A A STRAIGHT 50 PU HFFR 1 m / 3.28 ft USB 3 A A CROSSED 100 PU HFFR USB 3 A A STRAIGHT 100 PU HFFR 1.5 m / 4.92 ft USB 3 A A CROSSED 150 PU HFFR USB 3 A A STRAIGHT 150 PU HFFR 1.8 m / 5.91 ft USB 3 A A CROSSED 180 PU HFFR USB 3 A A STRAIGHT 180 PU HFFR 2 m / 6.56 ft USB 3 A A CROSSED 200 PU HFFR USB 3 A A STRAIGHT 200 PU HFFR 2.5 m / 8.20 ft USB 3 A A CROSSED 250 PU HFFR USB 3 A A STRAIGHT 250 PU HFFR 3 m / 9.84 ft USB 3 A A CROSSED 300 PU HFFR USB 3 A A STRAIGHT 300 PU HFFR 3.5 m / 11.48 ft USB 3 A A CROSSED 350 PU HFFR USB 3 A A STRAIGHT 350 PU HFFR 4 m / 13.12 ft USB 3 A A CROSSED 400 PU HFFR USB 3 A A STRAIGHT 400 PU HFFR 4.5 m / 14.76 ft USB 3 A A CROSSED 450 PU HFFR USB 3 A A STRAIGHT 450 PU HFFR 5 m / 16.40 ft USB 3 A A CROSSED 500 PU HFFR USB 3 A A STRAIGHT 500 PU HFFR ROHS compliant N & BZ USBF TV (USB-A) USB connection system for harsh environment With USB Field, you can insert a standard USB 2.0 cordset into a metallic plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling and grounding! This metallic plug is connected into a receptacle, using a Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with antidecoupling device for high vibrations. Main characteristics Applications nEmbedded computers nData acquisition and transmission in harsh environment n Railways nBattelfield communication systems nNavy systems nSealed against fluids and dusts (IP68) nShock, vibration and traction resistant nNo cabling operation in field and no tools required n Improved EMI protection n T ri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device - Shell size 15 n2 mechanical coding / polarization possibilities by the user (receptacle insert rotation) n USBF TV plug retention in the receptacle: 100 N in the axis n Mating cycles: 500 minimum USB specification 2.0 Data rate: up to 480 Mbps for high speed USB n Sealing (when mated): IP68 (temporary immersion) n Salt spray: 48 h with nickel plating > 500 h with olive drab cadmium 1000 h with marine bronze shell n Fire retardant / low smoke: UL94 V0 and NF F 16 101 & 16 102 n Vibrations: 10 - 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s n S hocks: IK06: weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair) n Humidity: 21 days, 43C, 98% humidity n Temperature range: - 40C / +85C Amphenol Environmental protection Data transmission Part number code USBF TV Series USB Field TV 2 1 G Shell type 6: plug 2: square flange receptacle 2PE: square flange receptacle with metal backshell (type 1) & with metal backshell + plastic gland (type 2) 2PEM: square flange receptacle with backshell + metal gland (only for back termination type 2 = Solder) 7: jam nut receptacle 7PE: jam nut receptacle with metal backshell (type 1) & with metal backshell + plastic gland (type 2) 7PEM: jam nut receptacle with backshell + metal gland (only for back termination type 2 = Solder) Back terminations (receptacles only) 1: female USB-A 2: solder (4 tinned holes) Shells material & finish N: aluminium shell - nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating BZ: marine bronze shell - ROHS compliant Examples: - Olive drab cadmium plug: USBF TV 6G - Olive drab cadmium square flange receptacle, USB-A back terminat: USBF TV 21G - Olive drab cadmium jam nut receptacle, USB-A receptacle back terminat: USBF TV 71G - Nickel jam nut receptacle, solder back termination: USBF TV 72N 97 Plug nShell type 6 USBF TV 6 X Receptacles n Square flange receptacle 4 mounting holes: shell type 2 USBF TV 2 XX Panel Drilling USBF TV 7 XX Panel Drilling n Jam nut receptacle Hexagonal nut mounting: shell type 7 Amphenol n Receptacles with backshell: Shell type 2PE and 7PE 86.9[3.422] [3.422] 86.9 Backshell used with back termination type 1: USB A receptacle (Not sealed) Same panel drilling as USBFTV 2xx USBF TV 2PE / 7PE-1 72.7 [2.862] Backshell used with back termination type 2: Solder (Sealed - IP68) USBF TV 2PE(M) / 7PE(M)-2 Back terminations Type 1: USB-A Receptacle Type 1: female USB-A Type 2: Solder Type 2: 4 Tinned holes to solder your cable solder 4 Tinned holes to solder your cable 98 View of the PCB of the View of the PCB of the Type 2 version with Type 2 version 4 tinned 4 tinned holeswith for solder termination holes for solder termination Panel Drilling (for type 2 only) Assembly instructions Can be used with most the USB cordset brands : No tools required! Plug assembly 1. Only if you need a full sealing (IP68): Install the white sticker around the plug, covering the 4 little holes of the overmolding 2. Insert the black O Ring around the front face of the USB A plug. This O Ring will ensure connection sealing 3. Insert the USB cordset into the metallic backshell 1 2 3 4 5 6 4. Insert the retention spacer laterally to the cable (this spacer is soft, in order to adapt to different shapes of overmolding) and slide the overmolding of the USB-A plug into this retention spacer 5. Insert the friction ring laterally to the cable 6. Choose the right coding (2 positions) and insert the USB-A plug into the protective plug. Note at this step, the main key is used for polarization. MAIN KEY USB insulation on the left USB insulation on the right PLUG RECEPTACLE 7. Screw the backshell on the plug body. A wrench can be necessary to fully tighten it, and the connection to the receptacle can help IMPORTANT NOTE 7a 7b Amphenol The connection sealing is not done by the black retention spacer (which is sloted), but by the front face ORing (fig.2) Receptacle assembly Insert the USB module from the rear. Reference is main key. Beware to have a coding compatible with the coding you used for the plug: on front view, the white shapes in the USBs must be on the same side. Example : coding B To remove the USB module, insert the removal tool USBF ODE from the Front, and push back the module. Accessories n Metallic caps USBF TVC 2 G Connector type 6: plug 2: square flange receptacle 7: jam nut eceptacle Shells material & finish N: aluminium shell - nickel - ROHS compliant G: aluminium shell - olive drab cadmium BZ: marine bronze shell - ROHS compliant n P anel gasket for square flange receptacle Thickness: 0,8 mm [.031] P/n: JE15 n Receptacle insert removal tool: p/n USBF ODE 99 ROHS compliant N & BZ USBF TV Transversally sealed receptacles In some applications, a transversal sealing for the receptacle is a must . This will prevent fluids and dust from going through the receptacle when plug or cap are not mated to the receptacle. The sealed solution (version "S") has a compound at the rear of the receptacle below. In addition, the Sealed USBF TV has been successfully tested in very high vibration corresponding to airplane applications. Main characteristics Applications nEmbedded computers nData acquisition and transmission in harsh environment n Railways nBattelfield communication systems nNavy systems Data transmission USB specification 2.0 Data rate: up to 480 Mb/s for high speed USB IMPORTANT NOTE Due to the compound, the coding of the connector must be done in the factory: use the codes A or B in the part number. Example: USBFTV 2S A 2 N 03 A Receptacle Amphenol Connection side view Main key USB insulation on the left nSealed against fluids and dusts (IP68) nShock, vibration and traction resistant n No cabling operation in field and no tools required n Improved EMI protection n Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device - Shell size 15 n 2 mechanical coding/polarization possibilities by the user (receptacle insert rotation) n USBF TV plug retention in the receptacle: 100 N in the axis n Mating cycles: 500 minimum Environmental protection n Sealing (when mated): IP68 (temporary immersion) n Salt spray: 48 h with nickel plating > 500 h with olive drab cadmium 1000 h with marine bronze shell n Fire retardant / Low smoke: UL94 V0 and NF F 16 101 & 16 102 n Vibrations: 10 - 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s n Shocks: IK06 weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair) n Humidity: 21 days, 43C, 98% humidity n Temperature range: - 40C / +85C USB insulation on the right Coding A Coding B Part number code USBF TV Series USB Field TV 2PES A 2 N 03 Shell Type 2S : square flange receptacle 2PES: square flange receptacle + backshell + plastic gland 2PEMS: square flange receptacle + backshell + metal gland 7S: jam nut receptacle 7PES: jam nut receptacle + backshell + plastic gland 7PEMS: jam nut receptacle + backshell + metal gland Coding "A" (Standard) or "B" Back terminations 2: rugged USB cable (see corresponding datasheet page 109) Shells plating N: nickel G: olive drab cadmium USB cable length 03: 30 cm [11.81 inches] 05: 50 cm [19.68 inches] 10: 1 meter [39.37 inches] USB cable end A: standard USB-A plug OPEN: open cable (no connector) Examples: 100 - Olive drab cadmium square flange receptacle with 30 cm of USB cable and standard USB-A plug: USBF TV 2S G 03 A - Nickel jam nut receptacle + backshell + plastic gland, with 1 meter of USB cable, and a standard USBA-A plug: USBF TV 7PES N10 A A n Square flange receptacle 4 mounting holes: shell type 2 USBF TV 2SA XXX n Jam nut receptacle hexagonal nut mounting: shell type 7 USBF TV 7SA XXX n Panel drilling Panel drilling Jam nut receptacle hexagonal nut mounting: shell type 7 72.7 [2.862] Amphenol mination type 1: sealed) Receptacles Backshell used with back termination type 2: Solder (Sealed - IP68) USBFTV 2PE(M) SA2XXX / USBFTV 7PE(M) SA2 XXX Panel drilling Cordset end USB cable end type "A" USB cable type "OPEN" 101 NEW USBF TV ROHS compliant N & BZ Hermetic receptacles In some applications, a transversal hermiticity for the receptacle is a must . This will prevent gas from going through the receptacle when plug or cap are not mated to the receptacle. The hermetic solution (version "H") has a compound at the rear of the receptacle. Helium leakage is less than 1.10-6 cm3 per second [0.1 micron cubit ft per hour] at one bar [15 psi] pressure differential. Applications Main characteristics nEmbedded computers nData acquisition and transmission in harsh environment n Railways nBattelfield communication systems nNavy systems nSame as the USBF TV (see page 76)... a complete IP68 sealing of the receptacle is added (even with no plug or no protective cap mated). nOutside dimensions are the same as the standard USBF TV (USB-A). n Vibrations : the compounded version of the USBF TV has been tested in vibration following the NAS 1599 aeronautic specification (ambient temperature): 5 - 3000 Hz, 20g, 2.5 mm [.1 inch] double amplitude, 3 axes, 12 hours Note: this specification exceeds MIL-C-26500 requirements. Data transmission USB specification 2.0 Data rate: up to 480 Mb/s for high speed USB IMPORTANT NOTE Due to the compound, the coding of the connector must be done in the factory: use the codes A or B in the part number. Example: USBFTV 2H A 2 N 03 A Receptacle Amphenol Connection side view Main key USB insulation on the left USB insulation on the right Coding A Coding B Part number code Series USB Field TV USBF TV 2H A 2 N 03 A Shell type 2H : hermetic square flange receptacle 2PEH: hermetic square flange receptacle + backshell + plastic gland 2PEMH: hermetic square flange receptacle + backshell + metal gland 7H: hermetic jam nut receptacle 7PEH: hermetic jam nut receptacle + backshell + plastic gland 7PEMH: hermetic jam nut receptacle + backshell + metal gland Coding "A" (standard) or "B" Back terminations 2: rugged USB cable (see corresponding datasheet page 109) Shells plating N: nickel G: olive drab cadmium USB cable length 03: 30 cm [11.81 inches] 05: 50 cm [19.68 inches] 10: 1 meter [39.37 inches] USB cable end A: standard USB-A plug OPEN: open cable (no connector) Examples: - Olive drab cadmium hermetic square flange receptacle with 30 cm of USB cable and standard USB-A plug: USBF TV 2H G 03 A - Nickel hermetic jam nut receptacle + backshell + plastic gland, with 1 meter of USB cable, and a standard USBA-A plug: USBF TV 7PEH N10 A 102 NEW USBF TV ROHS compliant N Receptacles with 360 EMI backshells USBFTV receptacles series with EMI backshells provide 360 shielding: same protection than the one proposed per standard MIL-DTL-38999 serie III connectors. We offer these EMI backshells with square flange and jam nut receptacles. The available platings are nickel or olive drab cadmium. With those solutions we suggest using our reinforced USB cable (shielded - zero halogen jacket) see page 109 We can provide those receptacles: * with cordset already soldered * without cordset Amphenol Example with a square flange receptacle (provided without cable) Plating Part number Square flange receptacle Jam nut receptacle Nickel - ROHS compliant KIT40263 KIT40245 Olive drab cadmium KIT40263G KIT40245G IMPORTANT NOTE With receptacles provided without cable, customer will have to solder his cable on the PCB ; please find below the cabling specification. If customer prefers to use his cable, please check with us compatibility with our EMI backshells: www.usbfield.com 103 NEW USBF TV Through bulkhead Receptacle Amphenol Part number Plating P/N Nickel - ROHS compliant USBF TV B 2 N Olive drab cadmium USBF TV B 2 G Nota : could be used with plug USBFTV, nickel and olive drab cadmium. See page 97. 104 ROHS compliant N USBF TV Stand off receptacles These receptacles can be soldered directly to your PCB. A compound insures a transversal sealing and good performance in high-vibration environments. The shell of those receptacles are in the "Stand Off" style. They can be connected with rugged USBF TV series plugs. 1.27 [0.05] +,008 ] 0 MODIFICATIONS RECOMMENDED PCB HOLE LAYOUT +0.2 0 4 HOLES O3.2 [,126 GE PANNEAU DRILLING 30,96 30.96 [[1.219] 1,219] 23,01 23.01 [[0.906] 0,906] 30,96 [1,219] DESSIN: RDB le 20/03/08 1/1 191-PLC-243-00 30,96 [1,219] 4 AREAS WITHOUT COMPONENTS 23.01 [0.906] 4 TROUS M3 POUR PANNEAU 1 & 4 = Power - Red & black wires USB2.0 cable 2 & 3 = Signal - White & green wires USB2.0 cable Sh = Shield 4 HOLES M3 FOR PANEL 1.27 [0.05] 2,54 0,05 [0,1 0,0019] 0.32 [,013] 25,70 [1,012] Coding B - Pins position : 1/1 1.27 [0.05] 23.01 [0.906] 3 25 [,128] 191-PLC-243-00 23,01 [0,906] 23,01 [0,906] BP 29 - 74311 THYEZ CEDEX BP 29 - 74311 THYEZ CEDEX O1. [,04 2,54 0,05 [0,1 0,0019] RDB le 20/03/08 Amphenol O25,5 [1,006] 15 15 [[0.591] 0,591] DESSIN: ECHELLE PERCAGE PANNEAU PANEL DRILLING RECOMMENDED PCB HOLE LAYOUT Panel drilling EMBASES CARREES CONFORME A LA NORME MIL-DTL-38999 SERIE III AVEC FIXATIONS CIRCUIT IMPRIME (Wall mounting receptacle conforms to MIL-DTL-38999 series III with stand off for printed circuit board) O1.020.05 [,040,002] 2,54 0,05 [0,1 0,0019] 0.32 [,013] 23.01 [0.906] PANNEAU 5.18 MAXI [PANEL ,204 MAXI] 41,28 41.28 [1.625] 15 Amphenol Socapex Amphenol Socapex TECHNIQUE: Y. GUILLOT le 21/03/08 TECHNIQUE: Y. GUILLOT le 21/03/08 PCB 1.6 A 2.8 [PCB .063 TO .110] [0,118] 2,54 0,05 [0,1 0,0019] +0.2 0 Plan originel 1 & 4 = Power - Red & black wires USB2.0 cable 2 & 3 = Signal - White & green wires USB2.0 cable Sh = Shield 23.01 [0.906] 23,01 [0,906] 0.32 0,32 [[0.013] 0,013] Coding A - Pins position : Nota : for coding B, please consult us. 1.27 [0.05] ECHELLEA 2,4 [0,094] 5 4 AREAS WITHOUT COMPONENTS CARRE 0.6 SQUARE [,024] Plan originel [0,197 ] recommended PCB hole Layout (coding A) - Solder side view 3 23,01 0,906] 23.8 USBF TV23,8 223,01 5USBF x F459 TV 2 5 x F459 [[0.937] 0,937 ] [1,625] 15 STAND OFFSTAND FOR PCB - DIMENSIONS OFF FOR PCB [[0.591] 0,591-] DIMENSIONS MODIFICATIONS A +,008 ] 0 [,126 RECOMMENDED PCB HOLE LAYOUT Receptacle 30,96 [1,219] 4.13 4,13 [[0.163] 0,163] +0.2 0 DROIT D'EN MODIFIER TOUTE COTE OU CARACTERISTIQUE. +,008 ] 0 [,126 MODIFICATIONS 0.32 [,013] 2,54 0,05 [0,1 0,0019] USBF TV 2S B 54 HOLES N F459 4 HOLES O3.2 O3.2 DANS LE BUT CONSTANT D'AMELIORER SES PRODUITS, Amphenol Socapex SE RESERVE LE IMP 036 A 41,28 [Plug 1,625] 45 45 [0,906] USBF TV 2S BSQUARE 5 G F459 FLANGE RECEPTACLE SQUARE FLANGE RECEPTACLE 2,54 [0,1] 4,13 [0,163] USB insulation on the left 15 [0,591] RECOMMENDED PCB HOLE LAYOUT Main key 45 45 (Wall mounting receptacle conforms to (Wall mounting receptacle conforms to MIL-DTL-38999 series III with stand off MIL-DTL-38999 series III with stand off for printed circuit forboard) printed circuit board) 3.5 P/N A 4 O1.020.05 [,138 TO ,157] for[,040,002] coding B 2,54 0,05 [0,1 0,0019] 23.01 [0.906] USBF TV 25 G F459 0.32 [,013] USBF TV 25 N F459 Olive drab cadmium 4 HOLES M3 THRU ALL FOR PCB 20,07 [0,79 4 HOLES M3 FOR PANEL 4 HOLES M3 FOR PANEL 5 [0,197] 1.27 [0.05] 1.27 [0.05] [0.05] Nickel - ROHS compliant 25,70 [1,012] 3 [ 33 3 1.27 1.27 1,27 1,27 [0.118]] [0,118 [0,118] [[0.05] 0,05] [[0.05] 0,05] 4 HOLES M3 PANNEAU 5.18 5.18 MAXI PANNEAU MAXI PANNEAU 5.18 MAXI 4 HOLES M3 23.01 THRU [PANEL,204 ,204 MAXI] THRUALL ALL FOR PCB [PANEL MAXI] [PANEL ,204 [0.906] MAXI]CARREES CONFORME EMBASES LA NORME FOR PCB EMBASES A CARREES CONFORME A LA NORME MIL-DTL-38999 SERIE III MIL-DTL-38999 SERIE III AVEC FIXATIONS CIRCUIT IMPRIME CIRCUIT IMPRIME AVEC FIXATIONS 20,07 2,54 0,05 P/N 13,1 2,54 0,05 [0,1 0,0019] [0,1O1.020.05 0,0019] [0,516 ] [0,79 ] coding for A[,040,002] 23.01 [0.906] Plating 2,4 [0,094] PCB 1.6 A 2.8 PCB 1.6 A 2.8 PCB 1.6 A4 2.8 TROUS M3 POUR PANNEAU 4 HOLES 4 TROUS M3 M3 FOR POURPANEL PANNEAU [PCB .063 TO TO .110].110] [PCB .063 [PCB .063 TO .110] 33,17 [1,3061.27 ] 1.27 [0.05] 23,01 23.01 [[0.906] 0,906] CARRE 0.6 SQUARE [,024] CARRE 0.6 0.6 CARRE SQUARE[,024] [,024] SQUARE 41,28 [1,625] 23.01 4 AREAS WITHOUT [0.906] COMPONENTS [0,906] PERCAGE PANNEAUPERCAGE PANNEAU Connection PANEL DRILLING side PANELview DRILLING USB insulation on the right 2.4 2,4 [[0.094] 0,094] 30,96 30.96 [[1.219] 1,219] 23,01 [0,906] 55 [[0.197] 0,197] 4 AREAS WITHOUT 23,01 COMPONENTS 3.5 A 4 30,96 [,138 TO ,157] [1,219] 2,54 [0,1] 4,13 [0,163] 4,13 [0,163] 41,28 [1,625] 15 [0,591] 15 [0,591] 23,01 [0,906] 3 25 [,128] Part 45 25,70 number [1,012] 1,27 [0,05] 15 [0,591] DROIT D'EN MODIFIER TOUTE COTE OU CARACTERISTIQUE. 15 [0,591] 3 25 [,128] 23,8 [0,937] O25,5 [1,006] 1,27 [0,05] 23,8 [0,937] 0,32 DANS LE BUT CONSTANT D'AMELIORER SES PRODUITS, Amphenol Socapex SE RESERVE LE IMP 036 A [0,013] 5 DANS LE BUT CONSTANT D'AMELIORER SES PRODUITS, Amphenol Socapex SE RESERVE LE IMP 036 A DROIT D'EN MODIFIER TOUTE COTE OU CARACTERISTIQUE. 0,32 [0,013] 1,27 0,05] M3 4 [HOLES 4 HOLES M3 THRU ALL FOR PCB THRU ALL FOR PCB O25,5 [1,006] 1,27 1,27 [0,05] [0,05] 1,27 [0,05] Coding B is also available, please consult us. 45 2.54 2,54 [[0.1] 0,1] 45 45 O 25.5 O25,5 0,32 [1.006] [0,013] [1,006] 45 Datas for coding A 33.17 33,17 33,17 [1.306] [1,306] [1,306] 13.1 3.5 13,1 A 20.07 3.5 A 44 13,1 20,07 20,07 [0.79]] [0.516][]0,79] [,138 [0,516 [0,79 [,138 [0,516 ],157] TOTO,157] Square flange receptacle A USBF TV 2 5 x F459 SQUARE FLANGE RECEPTACLE STAND OFF FOR PCB - DIMENSIONS Plan originel ECHELLE Amphenol Socapex BP 29 - 74311 THYEZ CEDEX DESSIN: RDB le 20/03/08 TECHNIQUE: Y. GUILLOT le 21/03/08 191-PLC-243-00 1/1 105 Jam nut receptacle 4 HOLES M3 THRU ALL 4 HOLES M3 THRU ALL 33.9 33.9 Part number Plating available P/N for coding A P/N for coding B Nickel - ROHS compliant USBF TV 75 N F459 USBF TV 7S B 5 N F459 Olive drab cadmium USBF TV 75 G F459 USBF TV 7S B 5 G F459 Connection side view Main key USB insulation on the left Amphenol USB insulation on the right Plug Receptacle Coding B - Pins position : Coding A - Pins position : 1 & 4 = Power - Red & black wires USB2.0 cable 2 & 3 = Signal - White & green wires USB2.0 cable Sh = Shield 1 & 4 = Power - Red & black wires USB2.0 cable 2 & 3 = Signal - White & green wires USB2.0 cable Sh = Shield recommended PCB hole Layout Solder side view Coding A Coding B Panel drilling 106 ROHS USB 2.0 Receptacle with Self Closing Cap This Self Closing Cap automatically protects the USB Field square flange receptacles (MIL-C-26482 type), protecting your system from dust and water projections. A spring automatically closes the upper part of the cap when either the USB cordset, or USB key are removed from the receptacle. el IP54 v e l g n Seali roof ) and (Splash compliant N&B dust P USBF 21 X SCC Amphenol 21.9 [.862] 26.97 [1.062] 26.1 [1.028] 64.1 [2.523] 36 [1.417] 26.7 [1.052] Version: USB-A (front and back termination) Plating Part number * Metallized inserts (EMI) USBF 21B SCC Black coated No (blank insert) USBF 21N SCC Nickel plated Yes USBF 21G SCC Olive drab cadmium plated Yes * The part number includes the receptacle + the self closing cap nNote: Panel gasket with any of these receptacles: JE18 RJF 21 X SCC, USBBF 21 X SCC, & IEEE1394 RJ45 version (see page 25) USB3.0-A version (see page 94) USB-B version (see page 118) IEEE1394 version (see page 143) 107 Metallic Self Closing Cap (SCC) For USBF TV 2.0 square flange receptacles. This Self Closing cap automatically protects the USBF TV (2.0 - type A) square flange receptacles (MIL-DTL-38999 type), protecting your system from dust and water projection. A spring automatically closes the upper part of the cap when the USB plug is removed from the receptacle. Sealing 31 [ 1,2205 ] Amphenol IMPORTANT NOTE Metal Self Closing cap are sold separately (without receptacle). Green Nickel Black Sealing level IP67 Plating P/N Black - ROHS compliant USBFTVSCCB Nickel - ROHS compliant USBFTVSCCN Olive drab cadmium USBFTVSCCG Remark: also compatible with USB3FTV (type A) & USBBFTV (type B) square flange receptacles: USB3FTVXX (see page 95) USBBFTV2XX (see page 119) nPanel gasket for square flange receptacle (thickness: 0,8 mm [.031]): Part number: JE15 108 29,5 [ 1,1614 ] 18 O25,3 [ 0,996] 24,61 [ 0,969 ] 47,5 [ 1,8701 ] 30,9 [ 0,2165 ] 24,61 [ 0,969 ] 4- O 3,25 [ 0,128 ] Part number [ 0,7087 ] level IP67 40 [ 1,5748 ] ROHS compliant High Reliability USB 2.0 Cordsets General construction: this is a USB-2.0 cable containing one 28 AWG 90 characteristic impedance data pair, two 24 AWG power conductors, overall SFTP shields (SFTP = double shielding, braid and foild), jacketed in black UV resistant Polyurethane HFFR*. Designed for fixed or portable applications in industrial and harsh environments. *HFFR: Halogen Free Flame Retardant. Jacket compound specification: Halogen Free Flame Retardant Polyether-based Polyurethane. Glossy finish. Excellent hydrolysis resistance. High microbial resistance. UV resistant. High flexibility. Applications n Robotics n Motion control n Railways nCNC machines nBattelfield communication n Industrial process Datas only le alone g) b for ca lu t USB p (withou electrical CHARACTERISTICS DC Resistance 94 Ohms/Km @ 20C Impedance 90 +/- 13 Ohms 1-400 MHz physical CHARACTERISTICS Attenuation bare copper, 7/0.12 mm nom (28 AWG) 1 KHz 8 db/100m max. DATA INSULATION 0.9 mm nom 4 MHz 15,6 db/100m max. COLOR DATA PAIR Green & white 24 MHz 38 db/100m max. POWER CONDUCTORS Tinned copper, 7/0.2 mm (24 AWG) 96 MHz 76 db/100m max. POWER INSULATION 1.1 mm nom 200 MHz 128 db/100m max. COLOR POWER WIRE Red & Black 400 MHz 232 db/100m max. SHIELDS Foil: poviding 100% coverage, in contact with tinned copper drain wire and an overall braid providing 65% nom. coverage made of 16x5/0.1 mm tinned copper strands Capacitance 2x28 AWG 54pF/m nom. @ 1KHz JACKET PU compound COLOR JACKET Black Capacitance Unbalance 2.0 pF/m max. @ 1KHz (wire to ground) WEIGHT 26 lbs/mft (38 kg/km) Dielectric Strength VAC/1 min - 500 V/Min OUTSIDE DIAM. 0.20 inch (5.1 mm nom. +/- 0.15) 2% max. @ 20C MIN BEND RADIUS (During installation) 45.9 mm (9x O. D.) Resistance Unbalance 65% min. 68% max. MIN BEND RADIUS (During operation) 25.5mm (5 x O.D.) Velocity of propagation TEMPERATURE installation Plus 60C, minus 5C TEMPERATURE operational Plus 85C, minus 40C Amphenol DATA CONDUCTORS Cordsets with a USB A plug overmolded on each end (under USB specifation 5m) Cordsets with a USB A plug overmolded on each end (out of USB specification > 5 m) Length (m/ft) Part number 0.5 m / 1,64 ft USB2 AA 050 PU HFFR 1 m / 3.28 ft USB2 AA 100 PU HFFR 1.50 m / 4.92 ft USB2 AA 150 PU HFFR Length (m/ft) Part number 6 m / 19,68 ft USB2 AA 600 PU HFFR 2 m / 6.56 ft USB2 AA 200 PU HFFR 7 m / 22.96 ft USB2 AA 700 PU HFFR 2.50 m / 8.2 ft USB2 AA 250 PU HFFR 8 m / 26.24 ft USB2 AA 800 PU HFFR 3 m / 9.84 ft USB2 AA 300 PU HFFR 9 m / 29.52 ft USB2 AA 900 PU HFFR 3.50 m / 11.48 ft USB2 AA 350 PU HFFR 10 m / 32.80 ft USB2 AA 1000 PU HFFR Reel of drum (without usb plug on ends) Length PN 300 m / ~ 984 ft 190-040567-00 4 m / 13.12 ft USB2 AA 400 PU HFFR 4.5 m / 14.76 ft USB2 AA 450 PU HFFR 5 m / 16.40 ft USB2 AA 500 PU HFFR 109 ROHS compliant N & BZ USBF SC Quick release series This product offers a new coupling solution, particurlarly for applications requiring quick disconnect. The system consists of a circular spring within in the receptacle keeping the plug mated, and creating an internal coupling mechanism. Main characteristics nSealed against fluids and dusts (IP67) nShock, vibration and traction resistant nNo cabling operation in field and no tools required n Improved EMI protection n Mating cycles: 500 n Mating force after 500 cycles: 40 N n Unmating force after 500 cycles: 55 N Environmental protection Applications nEmbedded computers nData acquisition and transmission in harsh environment n Railways nBattelfield communication systems nNavy systems Data transmission n Sealing (when mated): IP67 (temporary immersion) n Salt spray: 48 h with nickel plating > 500 h with olive drab cadmium n Fire retardant / Low smoke: UL94 V0 and NF F 16 101 & 16 102 n Vibrations: 10 - 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s n Shocks: IK06 weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair) n Humidity: 21 days, 43C, 98% humidity n Temperature range: - 40C / +85C Amphenol USB specification 2.0 Data rate: up to 480 Mb/s for high speed USB Part number code USBF SC Series USBF spring loaded Shell Type 6: plug 1: inline receptacle 2: square flange receptacle 7: jam nut receptacle Back terminations (receptacles only) 1: female USB-A 2: solder (4 tinned holes) - Not available for shell type "1" (inline receptacle) Shells material & finish N: aluminium shell - nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating BZ: marine bronze shell - ROHS compliant Back terminations USBFSC Back terminations receptacles Type 1: female USB-A 110 Type 2: solder (4 tinned holes) 2 1 G Plug n Shell type 6 USBFSC 6 X Receptacles n Square flange receptacle 4 mounting holes: shell type 2 n Jam nut receptacle hexagonal nut mounting: shell type 7 Amphenol USBFSC 21 X USBFSC 71 X n Inline receptacle: shell type 1 USBFSC 11 X 111 ROHS compliant N USBBF TV (USB-B) USB connection system for harsh environment USB Field allows you to use a standard USB 2.0 connection in harsh environment: * sealed against fluids and dusts (IP68) * shock, vibration and traction resistant * no cabling operation in field and no tools required * improved EMI protection * Tri Start thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device * plug retention in the receptacle: 100N in the axis * mating cycles: 500 minimum * temperature range: -40C/+85C Applications Main characteristics nEmbedded Computers nData Acquisition and transmission in harsh environment n Railways nBattelfield Communication Systems nNavy Systems nSealed against fluids and dusts (IP68) nShock, vibration and traction resistant nNo cabling operation in field and no tools required n Improved EMI protection nTri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device - Shell size 15 n Plug retention in the receptacle: 100N in the axis n Mating cycles: 500 minimum Data transmission Environmental protection USB specification 2.0 Data rate: up to 480 Mb/s for high speed USB nSealed against fluids and dusts (IP68) n Temperature range: - 40C / +85C Amphenol Part number code Series USBB Field TV USBBF TV 2 1 G Shell type 6: plug 2: square flange receptacle 2PE: square flange receptacle with metal backshell (type 1) & with metal backshell + plastic gland (type 2) 2PEM: square flange receptacle metal gland (only for soldering back termination type 2) 7: jam nut receptacle 7PE: jam nut receptacle with metal backshell (type 1) & with metal backshell + plastic gland (type 2) 7PEM: jam nut receptacle metal gland (only for soldering back termination type 2) Back terminations (receptacles only) 1: female USB-A 2: solder (4 tinned holes) Shells material & finish N: aluminium shell - nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating Examples: - Plug-cadmium plating: USBBF TV 6G - Square flange receptacle-USB-A back termination - cadmium plating: USBBF TV 21G - Jam nut receptacle, solder termination -nickel plating: USBBF TV 72N Back terminations Hole n1 Type 1: female USB-A 112 Type 2: solder (4 tinned holes) Grounding Hole n4 Plug n Shell type 6 USBBFTV 6 X Panel Drilling Receptacles n Shell type 2 - Square flange receptacle Panel Drilling USBBFTV 2 XX Amphenol n Shell type 7 - Jam nut receptacle Panel Drilling USBBFTV 7 XX n 2PEM and 7PEM shells with backshell to protect back termination from dust, shocks and vibration. 86.9 [3.422] 86.9[3.422] [3.422] 86.9 Backshell used with back termination type 1: Backshell used with back termination type 1: USB A receptacle (Not sealed) USB A receptacle (Not sealed) Same panel drilling as USBBFTV 2xx USBBF TV 2PE / 7PE-1 72.7 [2.862] 72.7 [2.862] Backshell used with Backshell used with back termination type 2: back termination type 2: Solder (Sealed - IP68) Solder (Sealed - IP68) USBBF TV 2PE(M) / 7PE(M)-2 Panel drilling (for type 2 only) 113 Accessories n Metallic caps (same as USB-A version - see page 99) USBF TVC Connector type 6: plug 2: square flange receptacle 7: jam nut receptacle Shells material & finish N: nickel plating - ROHS compliant G: olive drab cadmium plating n Panel gasket for square flange receptacle Amphenol 114 (thickness: 0,8 mm [.031]): p/n JE15 2 G NEW USBBF TV Stand off receptacles These receptacles can be soldered directly to your PCB. A compound insures a transversal sealing and good performance in high-vibration environments. The shell of those receptacles are in the "Stand Off" style. They can be connected with USBBF TV series plugs. Square flange receptacle Part number Plating Part number Nickel - ROHS compliant USBBF TV 2 5 N F459 Olive drab cadmium USBBF TV 2 5 G F459 recommended PCB hole Layout Amphenol 4 Holes M3 Thru all Panel drilling Solder side view 115 Jam nut receptacle Part number Plating Nickel - ROHS compliant USBBF TV 7 5 N F459 Olive drab cadmium USBBF TV 7 5 G F459 recommended PCB hole Layout Amphenol 116 Solder side view Part number Panel drilling ROHS compliant N & BZ USBBF TV Transversally sealed receptacles With USB Field, you can insert a standard USB 2.0 cordset into a metallic plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling and grounding! This metallic plug is connected into a receptacle, using a Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with antidecoupling device for high vibrations. Main characteristics n Sealed against fluids and dusts (IP68) nShock, vibration and traction resistant nNo cabling operation in field and no tools required n Improved EMI protection n T ri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device - Shell size 15 n2 mechanical coding/polarization possibilities by the user (receptacle insert rotation) n USBF TV plug retention in the receptacle: 100 N in the axis n Mating cycles: 500 minimum Applications nEmbedded computers n Data acquisition and transmission in harsh environment n Railways nBattelfield communication systems nNavy systems n Sealing (when mated): IP68 (temporary immersion) n Salt spray: 48 h with nickel plating > 500 h with olive drab cadmium 1000 h with marine bronze shell n Fire retardant / Low smoke: UL94 V0 and NF F 16 101 & 16 102 n Vibrations: 10 - 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s n S hocks: IK06 weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair) n Humidity: 21 days, 43C, 98% humidity n Temperature range: - 40C / +85C USB specification 2.0 Data rate: up to 480 Mb/s for high speed USB Amphenol Environmental protection Data transmission Part number code Series USBB Field TV USBBF TV 7S 2 G 10 OPEN Shell type 2S: sealed square flange receptacle 2PES: sealed square flange receptacle + backshell + plastic gland 2PEMS: sealed square flange receptacle + backshell + metal gland 7S: sealed jam nut receptacle 7PES: sealed jam nut receptacle with backshell 7PEMS: sealed jam nut receptacle + backshell + metal gland Back terminations 2: rugged USB cable Shells plating N: nickel G: olive drab cadmium USB cable length 03: 30 cm [11.81 inches] 05: 50 cm [19.68 inches] 10: 1 meter [39.37 inches] USB cable end A: standard USB-A plug OPEN: open USB cable (no connector) Examples: - Olive drab cadmium jam nut receptacle: USBBF TV 7 XX - Nickel square flange receptacle: USBBF TV 2 XX 117 NEW USBB receptacle with Self Closing Cap This Self Closing Cap automatically protects the RJ Field square flange receptacles (MIL-C-26482 type), protecting your system from dust and water projections. A spring automatically closes the upper part of the cap when the USBB plug is removed from the receptacle. IP54 l e v e l ling ) Sea t Proof d dus lash an (Sp USBBF 21 X SCC 21.9 [.862] Amphenol 26.97 [1.062] 26.1 [1.028] 64.1 [2.523] 36 [1.417] 26.7 [1.052] Version: USB-B (front in USB-B and back termination in USB-A) Plating Part number* Metallized inserts (EMI) Part number Black coated No (blank insert) USBBF 21B SCC Nickel plated Yes USBBF 21N SCC Olive drab cadmium plated Yes USBBF 21G SCC * The part number includes the receptacle + the self closing cap nNote: panel gasket with any of these receptacles, p/n JE18 RJF 21 X SCC, USBF 21 X SCC, & IEEE1394 118 ROHS compliant N&B RJ45 version USB2.0 & 3.0 - A version IEEE1394 version (see page 25) (see pages 94 & 107) (see page 143) Metallic Self Closing Cap (SCC) For USBB square flange receptacles. This Self Closing cap automatically protects the USBB (2.0 - type A) square flange receptacles (MIL-DTL-38999 type), protecting your system from dust and water projection. A spring automatically closes the upper part of the cap when the USB plug is removed from the receptacle. Sealing 40 [ 1,5748 ] 29,5 [ 1,1614 ] 18 O25,3 [ 0,996] 31 [ 1,2205 ] IMPORTANT NOTE Metal Self Closing cap are sold separately (without receptacle). Green Nickel Plating Black Amphenol 24,61 [ 0,969 ] 47,5 [ 1,8701 ] 30,9 [ 0,2165 ] 24,61 [ 0,969 ] 4- O 3,25 [ 0,128 ] Part number [ 0,7087 ] level IP67 P/N Black - ROHS compliant USBFTVSCCB Nickel - ROHS compliant USBFTVSCCN Olive drab cadmium USBFTVSCCG Remark: also compatible with USB3FTV (type A) & USBBFTV (type B) square flange receptacles: USB3FTV2XX (see page 95) USBFTV2XX (see page 108) nPanel gasket for square flange receptacle (thickness: 0,8 mm [.031]): Part number: JE15 119 NEW Special USB adaptor For Military & Commercial Aeronautics At the rear of the adaptor, the connection is for connectors type EN3646. Adaptor USB only Part number Coding P/n Black anodized Plating N 35608 Black anodized W 35615 4 HOLES Adaptor USB + Self Closing Cap (SCC) 4 HOLES Part number Plating Coding P/n Black anodized N 35616 Black anodized W 35617 For all options: Coding N 10-6 Male contact EN3155 Coding W Panel drilling 4 HOLES 120 Rugged USB Solutions Amphenol Cable assemblies table of contents NEW USB-A Field : plastic & neoprene solutions with self closing cap ................................................................................................................ NEW USB-B Field : Plastic shell - Overmolded cordset plug ..................................................................................................................... 122 125 121 NEW USB-A Field Rugged USB-A plastic & neoprene solutions with Self Closing Cap Amphenol USB-A Field - Plastic & Neoprene versions are rugged USB interconnect solutions fitted to be used in any industrial harsh environment. The Self Closing Cap enclosure enables to protect the USB-A Field receptacle from dust and fluids when the plug or the USB Memory key are unmatted. Main characteristics Applications nAccess point n Telecom equipments n Video control n Robotics n Industrial process control nCNC machines nSpecial machines n Sealing level: * Matted condition with plug or rugged USB Memory Key : IP67 * Receptacle with Self Closing Cap alone : IP54 n Mating cycles: 500 n Push-pull mating nNeoprene shells for plug & USB Keys nD ata transmission: USB specification 2.0 nD ata rate: up to 480 Mb/s for high speed USB n Temperature range: -40C / +85C n RoHS compliant Memory Key with soft neoprene shell Amphenol IP67 wh en matt ed on recepta cle or w ith neop rene protectiv e cape Capacity (Mb) Part number 122 USBAPKEY 4096 4096 USBAPKEY 8192 8192 Plug with soft neoprene shell Part number: USBAP 6 xxxA with USB-A plug ted IP67 when mat le ac pt ce re on Part number: USBAP 6 xxx Open Part number L +5cm L +0.164ft Meters Feet 0 0 USBAP6 05 OPEN Open 0.5 1.64 USBAP6 05A USB-A 0.5 1.64 USBAP6 10 OPEN Open 1.0 3.28 USBAP6 10A USB-A 1.0 3.28 USBAP6 15 OPEN OPEN 1.5 4.92 USBAP6 15A USB-A 1.5 4.92 USBAP6 20 OPEN OPEN 2.0 6.56 USBAP6 20A USB-A 2.0 6.56 Square flange receptacle IP54 when alon e Amphenol Extremity type Open or USB-A Part number: USBAPSCC 21 Cordset length Meters Part number Cordset length Feet USBAPSCC 22 02A 0.2 0.66 USBAPSCC 22 03A 0.3 0.98 USBAPSCC 22 05A 0.5 1.65 USBAPSCC 22 10A 1.0 3.28 123 Jam nut receptacle IP54 when alon e Part number: USBAPSCC 71 Cordset length Meters Part number USBAPSCC 72 02A 0.2 Cordset length Feet 0.66 USBAPSCC 72 03A 0.3 0.98 USBAPSCC 72 05A 0.5 1.65 USBAPSCC 72 10A 1.0 3.28 Amphenol USB plastic - IP67 cap (for square flange receptacle only) Part number: USBAP IP67 CAP Cap lanyard fixed by a screw (for square flange receptacle only) How to unplug: Locking Shape: Push-up the self-closing cap before removing the USBKey, Plug or IP67 protective cap from the receptacle 124 NEW USB-B Field ROHS compliant Plastic shell - Overmolded cordset plug IP68 Sealed USB-B connection system * Plastic shells * Thread coupling * Overmolded plug cordset: male sealed USB-B plug to standard USB-A plug * Available cordset lengths: 1m and 2m - For other lengths please contact us * Rear mount jam nut receptacle with 50mm flying lead + 5-way connector back termination. Panel gasket included. * Temperature range: -20C +80C Applications nEmbedded computers n Data transfer nNumerical control machine Overmolded plug cordset : male sealed USB-B plug, standard USB-A plug. USB 2.0 cable - PVC jacket Length USBBF6100 100050mm [39.371.97] USBBF6200 200050mm [78.741.97] Receptacle - Female USB-B Amphenol Part number JWT Connector - Pitch 2.5mm JWT 1 = USB1 = RED (AWG 24) JWT 2 = USB2 = WHITE (AWG 28) JWT 3 = USB3 = GREEN (AWG 28) JWT 4 = USB4 = BLACK (AWG 24) JWT 5 = USB Shield Part number : USBBF7 Receptacle cap Part number: USBBFC7 125 NOTES .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. Amphenol .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. 126 Rugged electronics Amphenol Rugged USB Solutions table of contents NEW Reinforced USBF TV Memory Keys ........................................................................................................................................................................................ 128 Reinforced USB Memory Keys ..................................................................................................................................................................... 129 NEW Reinforced USB amplifier ............................................................................................................................................................................... 130 127 NEW0 ROHS USB3. Reinforced USB3FTV & USBFTV 2.0 Memory Keys compliant N Derived from MIL-DTL-38999 series III specification * from 4 GB to 256 GB We provide reinforced USB memory keys available in different capacities. They can be used ONLY with our USB3FTV and USBFTV series receptacles. When mated on the receptacle, the system is IP68 and allows data transmission in harsh environments. Environmental protection n Sealing: IP68 (when mated) n Salt spray: 48 h with nickel plating (ROHS) > 500 h with olive drab cadmium n Vibrations: MIL-STD-810F method 514.5 fig 514.5.C cat 14 n Temperature range: - 40C / +85C (MIL-STD-810F) n Data transmission during vibration & temperature tests IMPORTANT NOTE USBFTV memory key to be used with USBFTV receptacles (3.0 and 2.0) see page 86 for 3.0 & page 97 for 2.0 Other features n Type: USB2.0 (capacity 4 GB) USB3.0 (capacities 32 GB to 256 GB) n Voltage: 5V DC - 500 mA max Amphenol USB2.0 - Memory size 4 GB USB3.0 - Memory size from 32GB to 256GB USB cordset is included with each memory key. Note: our rugged memory keys are sold under standard electronic manufacturer configuration for data storage. If, for your own usage, you need to re-configurate the electronic (under Linux for example), it will be under customer responsibility. Amphenol is not responsible for any wrong doing or misguided use of the product by its customers. Under request, we can provide you with electronic manufacturer details so you can check if their specific configuration will work with the electronic (please specify memory capacity). Amphenol can also study the integration of electronic selected by a customer. In order to do so, we need to receive a sample of the USB memory stick so we can study its integration into our existing concept or adapt it. Please send your requests to contact@usbfield.com Definition of part number USBFTV KEY 6 4096 For USB2.0 version Capacity for USBFTV KEY: 4096 A N USB3FTV KEY 6 Coding position: 32 For USB3.0 version A: coding A B: coding B Nota: the coding can be changed on the receptacle counter part using our tool USBFODE Nota: USB3.0 is compatible with USB2.0 CAP Plating CAP: with cap Capacity for USB3FTV KEY: N: nickel Blank: without cap 32 / 64 / 128 / 256 G: olive drab cadmium Nota: other capacity, please consult us at contact@usbfield.com Nota: please check the plating of your USBFTV receptacle. Examples: - USB2.0 version, coding A, capacity of 4096 MB, nickel plating: p/n is USBFTVKEY6A4096N - USB3.0 version, coding B, capacity of 64GB, olive drab cadmium platin, with cap: p/n is USB3FTVKEY6B64GCAPB NB: product suggested to electronic changes depending on our electronic suppliers, new capacities, obsolescence. 128 B To be specified for USB3.0 keys only ROHS compliant Reinforced USB Memory Keys We provide reinforced USB memory keys available in different capacities. When mated, the system is IP68. Shells are metallic with 1/4 turn bayonet coupling. It provides a full protection of the data stored into the keys when the cap is closed. For full data protection during data transfers, check our USBFTV memory keys. Environmental protection n Sealing: IP68 (when closed) n Salt spray: 48 h with nickel plating (ROHS) > 96 h with black coating (ROHS) > 500 h with olive drab cadmium n Vibrations: MIL-STD-810F method 514.5 fig 514.5.C cat 14 n Temperature range: - 40C / +85C (MIL-STD-810F) Other features n Type: USB2.0 n Voltage: 5V DC - 500 mA max n Electromagnetic compatibility: 89/336/EEC and Part 15 Class B 51,7 [2,034] Note: Our rugged memory keys are sold under standard electronic manufacturer configuration for data storage. If, for your own usage, you need to re-configurate the electronic (under Linux for example), it will be under customer responsibility. Amphenol is not responsible for any wrong doing or misguided use of the product by its customers. Under request, we can provide you with electronic manufacturer details so you can check if their specific configuration will work with the electronic (please specify memory capacity). Amphenol can also study the integration of electronic selected by a customer. In order to do so, we need to received a sample of the USB memory stick so we can study its integration into our existing concept or adapt it. Please send your requests to contact@usbfield.com Up to memory size 8GB Amphenol IMPORTANT NOTE Compatible with any standard USB port USB cordset is included with each memory key Rugged Metallic USB KEY with CAP SEALING: IP 67 Definition of part number USBF KEY 4096 N Beginning of every USB Key part number. Remains unchanged. Capacity of your USBF Key: 4096 | 8192 Shell finish: N: Nickel G: Green B: Black Other capacity, please consult us at contact@rjfield.com * GT: Fast Data Transfer EXAMPLE: USBFKEY4096N: USB MEMORY KEY - CAPACITY OF4096MB - SHELL FINISH: Nickel EXAMPLE: USBFKEY8192G: USB MEMORY KEY - CAPACITY OF 8192MB - SHELL FINISH: GREEN 129 NEW Reinforced USB Amplifier ROHS compliant N We provide USB amplifier if your need exceeds 5 meters up to 10 meters (16.40 up to 32.80 ft]. This product is subject to custom design. For more information, please consult us. Jam nut receptacle Ampli with cable reinforced PU jacket open Amphenol USB amplifier selection guide USB amplifier selection guide Define your own solution by selecting options in the scheme below Define your own solution in selecting options in the scheme below L1 + L2 < 9.6 meters Customer signal source Type of USB cable end open (no connector) or standard USB-A plug or USBFTV6x plug ? if USBFTV plug - Type of plating ? G oliv drab cad or N Nickel - Protective cap ? Yes / No L 2 < 4.8 meters L2 = to be specified L 1 < 4.8 meters L1 = to be specified USB amplifier side -Type of receptacle : Square or jam nut ? - Type of plug ? Standard USB-A plug or USBFTV6x (plug) - Type of plating G oliv drab cad or N Nickel if USBFTV plug - Type of plating ? G oliv drab cad or N Nickel - Protective cap ? Yes / No - Protective cap ? Yes / No For any special configuration out of this definition, thanks to consult us at contact@usbfield.com 130 USB device : Keyboard, mouse, USB memory stick,... Type of USB cable end open (no connector) or standard USB-A plug or USBFTV6x plug ? or USBFTV receptacle? if USBFTV 6x plug - Type of plating ? G oliv drab cad or N Nickel - Protective cap ? Yes / No Receptacle cap ? Yes / No if USBFTV recept acle - Type of receptacle : Square or jam nut ? - Type of back termination ? Female USB-A or soldered cable - Backshell ? Yes / No - Transversally sealed (only for soldered cable termination)? Yes / No - Type of plating ? G oliv drab cad or N Nickel - Protective cap ? Yes / No Amphenol Rugged ATEX Zone 2 solutions table of contents RJFTVX, USBFTVX, RJ11FTVX ................................................................................................................................................................................................. 132 RJSPCEX ATEX ZONE 2 Rugged & IP68 sealed Ethernet switch ...................................................................................................... 138 131 RJFTVX, USBFTVX, RJ11FTVX RJ45, USB, RJ11/12 explosion proof solutions for Zone 2 Amphenol Atex Field Bus range is designed for device group II category 3G. According to EN60079-15 it may be operated within zone 2 and class I, Division 2, as low power non sparking connectors. RJFTVX * Rugged and sealed RJ45 connector RJFTVX allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in ATEX zone 2 environments. With the patented RJStop system you can use a standard RJ45 cordset in a metallic plug which will protect it from shocks, dust and fluids. RJFTVX features the same main characteristics than RJFTV series (see page 26). Plug Characteristics Amphenol Part number Plating Plug n Ex marking II3G ExnAIIT6 X n Operating temperature range -40C / +60C n Voltage 60 Veff max n Power 20 W max n Outside cable diameter 6mm to 12mm n Sealing IP68 n Data transmission 10 BaseT, 100 BaseTX & 1000 BaseT networks. Cat. 5e per TIA/EIA 568B & Class D per ISO/IEC 11801 IP68 metallic cap Nickel RJFTVX6MN RJFTVC6N Olive drab cadmium RJFTVX6MG RJFTVC6G Square flange receptacle Part number 132 Plating Receptacle, RJ45 back termination, coding A IP68 metallic cap Nickel RJFTVX2SA1N RJFTVC2N Olive drab cadmium RJFTVX2SA1G RJFTVC2G Jam nut receptacle Part number Plating Receptacle, RJ45 back termination, coding A IP68 metallic cap Nickel RJFTVX7SA1N RJFTVC7N Olive drab cadmium RJFTVX7SA1G RJFTVC7G REMARK: As receptacles are compounded (IP68 transversally sealing), coding position has to be specified in the part number : A (standard), B, C or D Part number Nickel plating Olive drab cadmium plating RJ45 cordset length (meters) RJFTVX2SA2N03100BTX RJFTVx2SA2G03100BTX 0.3 RJFTVX2SA2N05100BTX RJFTVx2SA2G05100BTX 0.5 RJFTVX2SA2N10100BTX RJFTVx2SA2G10100BTX 1.0 RJFTVX2SA2N15100BTX RJFTVx2SA2G15100BTX 1.5 Part number code Series RJ Field TV RJF TVX 7S A 2 N 05 100BTX Shell Type 2S: Square flange receptacle 7S: Jam nut receptacle 6M: Plug Coding (for receptacles only) "A" (Standard) or "B", "C", "D" Amphenol Receptacles can be provided with RJ45 cordsets. There are 4 standard lengths as described hereunder (with coding "A"): Back Terminations (for receptacles only) 1: Female RJ45 2: RJ45 cordset Shell Material and Finish: N: Nickel G: Olive drab cadmium Cordset length (for receptacles with "2" back termination only) 03 100BTX:30 cm [11.81 inches] 05 100 BTX:50 cm [19.68 inches] 10 100 BTX:1 meter [39.37 inches] 15 100BTX: 1,5 meters [59.04 inches] Assembly instructions for the plug Assembling of the plug. ASSEMBLY + CODING CLIC ! 4 codings possibilities (defined by the customer during the assembling). Coding A Coding B Coding C Coding D Plug CLIC ! Main key Receptacle IMPORTANT NOTE: to remove the insert use the nInsert removal tool for plug INSERTS CODING Connection side view P/N: RJF ODE 133 USBFTVX * Rugged and sealed USB connector With USBFTVX, you can insert a standard USB 2.0 cordset into a metallic plug which will protect it from shocks, dust and fluids. This range is fitted to be used in Atex zone 2 environments. This metallic plug is connected into a receptacle, using a Tri Start thread coupling mechanism (MIL-DTL-38999 series III type) with antidecoupling device for high vibrations. USBFTVX features the same main characteristics than USBFTV series (see page 76). Characteristics n Ex marking II3G ExnAIIT6 X n Outside cable diameter 4mm to 6mm n Operating temperature range -40C / +70C n Sealing IP68 n Voltage 60 Veff max n Data transmission USB 2.0 up to 480 Mb/s n Power 20 W max Plug Part number Plating Plug IP68 metallic cap Nickel USBFTVX6N USBFTVC6N Olive drab cadmium USBFTVX6G USBFTVC6G Amphenol Square flange receptacle Cable end Type "A" (Standard USB "A" Plug) Cable end Type "OPEN" (No connector) Jam nut receptacle Cable end Type "A" (Standard USB "A" Plug) 134 Cable end Type "OPEN" (No connector) Receptacle Connection side view Main key REMARK: as the receptacles are compounded (IP68 trans- versally sealing), the coding position has to be specified in the part number: A (standard), or B USB insulation on the left USB insulation on the right Connection side view of the receptacle Coding A Coding B Part number code Series USB Field TV USBF TVX 2S A 2 N 03 A Shell Type 2S: square flange receptacle 7S: jam nut receptacle Coding: "A" (Standard) or "B" Back Terminations 2: rugged USB cable Shells Plating N: Nickel G: Olive drab cadmium plating USB cable length 03: 30 cm [11.81 inches] 05: 50 cm [19.68 inches] 10: 1 meter [39.37 inches] USB cable end A: Standard USB-A plug OPEN: Open cable (no connector) CAPS for receptacles : Part number Plating Cap for square flange receptacle Cap for jam nut receptacle Nickel USBFTVC2N USBFTVC7N Olive drab cadmium USBFTVC2G USBFTVC7G Amphenol Assembly instructions of the plug 1. Only if you need a full sealing (IP68): Install the white sticker around the plug, covering the 4 little holes of the overmolding 2. Insert the black O Ring around the front face of the USB A plug. This O Ring will ensure connection sealing 3. Insert the USB cordset into the metallic backshell 1 2 3 4 5 6 4. Insert the retention spacer laterally to the cable (this spacer is soft, in order to adapt to different shapes of overmolding) and slide the overmolding of the USB-A plug into this retention spacer 5. Insert the friction ring laterally to the cable 6. Choose the right coding (2 positions) and insert the USB-A plug into the protective plug. Note at this step, the main key is used for polarization. Plug Connection side view Main key USB insulation on the left USB insulation on the right Coding A Coding B 7. Screw the backshell on the plug body. A wrench can be necessary to fully tighten it, and the connection to the receptacle can help. IMPORTANT NOTE The connection sealing is not done by the black retention spacer (which is sloted), but by the front face ORing (fig.2) 7a 7b IMPORTANT NOTE To remove the insert use the insert removal tool for plug. P/N: USBF ODE 135 RJ11FTVX * Rugged and sealed RJ11/12 connector RJ11FTVX allows you to use a standard phone RJ11/RJ12 connection in Atex zone 2 environments. With the patented RJStop(R) system you can use a standard RJ11 / RJ12 cordset in a metallic plug which will protect it from shocks, dust and fluids. Characteristics n Ex marking II3G ExnAIIT6 X n Operating temperature range -40C / +60C n Voltage n Power 60 Veff max n Outside cable diameter n Sealing 4mm to 5.5mm n n n n n n Tri Star thread with anti-decoupling device (MIL-DTL-38999 series III) 20 W max Coupling mechanism IP68 Mating cycles 500 min Salt spray 48h with nickel plating / 500 h with oliv drab cadmium plating Coding 4 mechanical user-defined coding / Polarization settings (insert rotation) Fire retardant / Low smoke UL94 V0 and NF16 101 & 16 102 R11 cordset retention in the plug 100 N in the Axis Plug Amphenol Part number 136 Plating Plug Cap Nickel RJ11FTVX6MN RJ11FTVC6N Olive drab cadmium RJ11FTVX6MG RJ11FTVC6G Square flange receptacle Part number Plating Receptacle - Female RJ11 back termination - Coding A Receptacle cap Nickel RJ11FTVX2SA1N RJ11FTVC2N Olive drab cadmium RJ11FTVX2SA1G RJ11FTVC2G Amphenol Jam nut receptacle j INSTRUCTIONS D'ASSEMBLAGE Amp ASSEMBLY INSTRUCTIONS s www. FIGURE 1 Receptacle - Female RJ11 back termination - Coding A Receptacle cap Nickel RJ11FTVX7SA1N RJ11FTVC7N Olive drab cadmium RJ11FTVX7SA1G RJ11FTVC7G REMARK: As receptacles are compounded (IP68 transversally sealing), coding position has to be specified in the part number : A (standard), B, C or D (connection side views) Receptacle www.RJField.com mphenol socapex Plug 137 . Plating CROU HEXAGONAL Part number RJ11FTVX - 40831 - Rev A Diametre de cable acceptable : 4 a 5.5mm Outside cable diameter : 4 to 5.5mm ROHS compliant rjspcex Atex Zone 2 Rugged & IP68 Sealed ethernet switch This Ethernet Switch is a combination of rugged packaging with locking device for Zone 2 hazardous location, with fault-tolerant network redundancy. Industrial Applications Outstanding features nOil & Gas n Process Control nFactory Automation n n n n n P/N: RJSPC-EX-5ES1-PLG-CAPS Note: this part number includes: *One ATEX Zone 2 IP68 Plug and Play Ethernet switch equipped with caps on Ethernet connectors * One power plug equipped with anti decoupling nut * Five Ethernet plugs equipped with anti decoupling spring P/N: RJSPC-EX-5RS1-PLG-CAPS Amphenol Note: this part number includes: *One ATEX Zone 2 IP68 RING Ethernet switch equipped with caps on Ethernet connectors * One power plug equipped with anti decoupling nut * Five Ethernet plugs equipped with anti decoupling spring IP65/68 Sealing ATEX Zone 2II3G ExnAII T4X (EN60079-15 & EN60079-0) Plug and Play simplicity Ring redundancy Operating temperature: -40F to 170F (-40C to +75C) Key Features n Ring Switch Networking Features (managed features available!) n Real-Time Ring for ultra-fast fault-tolerant loops * Recovery time of 30 ms + 5 ms per hop! n Modbus monitoring over Ethernet * Ideal for deterministic systems and PLCs n Real-time traffic prioritization (QoS and CoS) * Assure delivery of real-time data * Improve network utilization * User settable priority assignments n Advanced switch features * User configurable port settings * Port mirroring for traffic diagnostics * Pre-configurable for Plug-And-Play simplicity n n n n n n n Waterproof IP68 Rating (NEMA 6) Reduced Installation Costs with the patented RJStop(R) system Use any standard RJ45 cordset Rugged Enclosure in Polyester reinforced with 30% glass fiber Redundant power inputs with surge/spike protection Ultra reliable 1,000,000 hours Mean Time Between Failure (MTBF) Zone 2 hazardous location (models RJSPC-EX) 138 Description (example for Ring model) LEDs indicating activity, link status, datarate (10/100 Mbps) LED indicating ring status 5 rugged IP68 RJ Field Ethernet ports Real-time ring feature IP68 polyester enclosure reinforced with glass fiber OK power & ring status LEDs indicating power Anti-decoupling nut for power plug Anti-decoupling spring for ethernet plugs Other rugged solutions Amphenol Field installable table of contents FWFTV ...................................................................................................................................................................................................................................... 140 Self Closing Cap for IEEE1394 receptacles .......................................................................................................................................... 143 RJ11F ................................................................................................................................................................................................................ 144 NEW Special RJ11 Military & Commercial Aeronautics ............................................................................................................................. 146 MTRJF TV - Fiber optic solution............................................................................................................................................................... 148 LC Field - Fiber optic solution .................................................................................................................................................................. 150 139 ROHS compliant N FWF TV IEEE 1394A Connection System for Harsh Environments With FW Field, you can insert a standard IEEE1394A cordset into a metallic plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling and grounding! This metallic plug is connected into a receptacle, using a Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with antidecoupling device for high vibrations. Main characteristics Applications nEmbedded Computers nVideo n Railways nBattelfield Communication Systems nNaval & Shipboard Systems n Robotics & Automation n Process Control n Rugged Communications Data transmission IEEE 1394a-2000 400 Mbits/second over 4.5 meters nNo assembly tools required nSealed against fluids and dusts (IP68) n No time-consuming in-field cabling operation necessary nT ri-start thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device n FW plug retention in the receptacle: 100 N in the axis n Mating cycles: 500 minimum n Improved EMI protection Environmental protection Amphenol n Sealing (mated): IP68 (Temporary immersion - 1 meter up to 30 minutes) n Salt Spray: 48 h with Nickel plating > 500 h with Olive Drab Cadmium n Fire Retardant / Low Smoke: UL94 V0 and NF F 16 101 & 16 102 n Vibrations: 10 - 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s n S hocks: IK06: weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair) n Humidity: 21 days, 43C, 98% humidity n Temperature Range: - 40C / +85C Part number code Series IEEE1394 Field TV FWF TV 2 Shell Type 6: Plug 2:Square Flange Receptacle 2PE:Square flange receptacle with metal backshell (type 1) & with metal backshell + plastic gland (type 2) 7: Jam Nut Receptacle 7PE: Jam nut receptacle with metal backshell (type 1) & with metal backshell + plastic gland (type 2) Back Terminations (Receptacles only) 1: IEEE 1394 receptacle 2:Solder Board (6 tinned holes) Shell Plating N:Nickel - ROHS Compliant G:Olive Drab Cadmium Examples: 140 - Olive Drab Cadmium Plug: FWF TV 6G - Olive Drab Cadmium Square Flange Receptacle, IEEE 1394 front & back: FWF TV 21G - Olive Drab Cadmium Jam Nut Receptacle, IEEE 1394 front and back: FWF TV 71G - Nickel Jam Nut Receptacle, solder board termination: FWF TV 72N 1 G Plug nShell type 6 FWF TV 6 X Receptacles n Square flange receptacle 4 mounting holes: Shell type 2 FWF TV 2 XX Panel Drilling FWF TV 7 XX Panel Drilling 77[3.020] 86.9 [3.422] 86.9[3.422] n Receptacles with backshell: Shell type 2PE and 7PE Backshell used with IEEE 1394 Backshell used with IEEE 1394 Receptacle with back-termination - (Type 1) Receptacle with back-termination - (Type 1) Non sealed version Non sealed Same panel drilling version as FWFTV 2xx FWF TV 2PE & 7PE Type 1 Amphenol 33.8 [1.332] n Jam nut receptacle Hexagonal Nut mounting: Shell type 7 Backshell used with PCB Backshell used with PCB Receptacle with back-termination (Type 2) 2) Receptacle back- termination - (Type Sealed version IP67 Sealed version - IP67 FWF TV 2PE & 7PE Type 2 Panel Drilling (for type 2 only) Back terminations View of the PCB Type 2 Type 1: IEEE 1394 Receptacle Type 1: IEEE 1394 Receptacle Type 2: Solder 6 Tinned holes for soldering Type 2: Solder 6 Tinned holes for soldering version - with 6 tinned holes for solder termination 141 Assembly instructions Can be used with most IEEE 1394 cordset brands: No tools required! Plug Assembly 1. If a fully sealed (IP68) assembly is required: Install the white tape around the plug to cover the 4 holes of the overmolding. If there are no holes omit this step. 1 2. Insert the black O Ring around the front face of the IEEE 1394 plug. This O Ring will ensure the seal. 2 3. Insert the IEEE 1394 cordset into the metallic backshell. 4. Insert the retention spacer laterally onto the cable (this spacer is soft so as to adapt to various overmolding styles) and slide the IEEE 1394 plug into this retention spacer. 3 4 5 6 5. Insert the friction ring laterally onto the cable cordset. 6. Insert the IEEE 1394 plug into the metallic circular shell. Note at this step that the main key is used for polarization. 7. Screw the backshell on the plug body. A spanner may be required to fully close the backshell to the circular shell. Important Note: The sealing of the connector is not done by the black retention spacers which are slotted, but rather by the front face O-Ring (Fig 2). 7a 7b Receptacle assembly Amphenol To Solder your cable onto the PCB: 1. Attach the 2 metallized plastic inserts around the PCB (Fig 1a & 1b). 2. Insert the IEEE 1394 module from the rear of the connector. 1a 2 1b Removing Modules 1. Insert the removal tool FWF ODE from the front 2. Push the module back with thumb. 1 2 Accessories n Metallic Caps FWF TVC Connector Type 6: Plug 2:Square Flange Receptacle 7: Jam Nut Receptacle Shell plating N:Nickel - ROHS Compliant G:Olive Drab Cadmium n Panel Gasket for square flange receptacle (Thickness: 0,8 mm [.031]): JE15 n Receptacle Insert removal tool: FWF ODE 142 2 G ROHS compliant N&B IEEE1394 Receptacle with Self Closing Cap This Self Closing Cap automatically protects the IEEE1394 square flange receptacles (MIL-C-26482 type), protecting your system from dust and water projections. A spring automatically closes the upper part of the cap when the IEEE1394 plug, or IEEE1394 cordset, are removed from the receptacle. FWF 21 X SCC Amphenol 21.9 [.862] 26.97 [1.062] 26.1 [1.028] 64.1 [2.523] 36 [1.417] 26.7 [1.052] Version IEEE1394 Plating Part number * Metallized inserts (EMI) FWF 21B SCC Black coated No (blank insert) FWF 21N SCC Nickel plated Yes FWF 21G SCC Olive drab cadmium plated Yes * The part number includes the receptacle + the self closing cap nNote: Panel gasket with any of these receptacles: JE18 RJF 21 X SCC, USBF 21 X SCC, USBBF 21 X SCC RJ45 version (see page 25) USB2.0 & 3.0 - A version (see pages 94 & 107) USB-B version (see page 118) 143 ROHS compliant N&B RJ11F Rugged RJ11/RJ12 Connection System for Harsh Environment RJ11Field allows you to use a standard phone RJ11 / RJ12 connection in harsh environments. With the patented RJStop(R) system you can use a standard RJ11 / RJ12 cordset in a metallic plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling! Main characteristics nB ayonet coupling ("Audible & Visual" coupling signal ) nR obust metallic shells based on MIL-DTL-26482 H n4 mechanical user-defined coding / Polarization settings (insert rotation) nR J11 cordset retention in the plug: 100 N in the axis n Mating cycles: 500 min Applications n Industrial applications n Battlefield communication Environmental Protection n Sealing: IP68 n Salt Spray: 48 h with Nickel plating > 96 h with black coating > 500 h with Oliv Drab Cadmium n Fire Retardant / Low Smoke: UL94 V0 and NF F 16 101 & 16 102 n Vibrations: 10 - 500 Hz, 10 g, 3 axes: no discontinuity > 10 nano s. n S hocks: IK06: weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair) n Humidity: 21 days, 43C, 98% humidity n Temperature Range: - 40C / +85C Part Number Code Amphenol Series RJ11Field RJ11F 2 2 B Shell Type 6: Plug, Plastic Gland 2:Square Flange Receptacle 7: Jam Nut Receptacle Back Terminations (For Receptacles only) 1:Female RJ11 2:Solder (6 tinned holes) Shell Finishes B:Black Coating - ROHS Compliant N:Nickel - ROHS Compliant G:Olive Drab Cadmium Examples: - Black Plug: RJ11F 6 B - Black square flange receptacle, Female RJ11 Back termination: RJ11F 2 1 B - Nickel Jam Nut Receptacle, solder termination: RJ11F 72 N n Metallic cap RJ11FC 2 B Connector Type 6: Plug 2:Square Flange Receptacle 7: Jam Nut Receptacle Receptacle cap Finishes B:Black Coating - ROHS Compliant N:Nickel - ROHS Compliant G:Olive Drab Cadmium nPanel gasket for square flange 2 thickness: 0,6 mm P/N: JE 14 144 nInsert removal tool for receptacle and plug P/N = RJ11F ODE Plug nShell type 6 with Plastic Gland RJ11F 6 X Receptacles nSquare flange receptacle, 4 mounting holes: shell type 2 Panel Drilling [O0.886] FRONT PANEL MOUNTING [O0.984] REAR PANEL MOUNTING RJ11F 2 XX Cable Wiring 6 5 4 3 2 1 RJ11 receptacle 6 5 4 3 2 1 Amphenol nJam nut receptacle, Hexagonal Nut mounting: Shell type 7 RJ11F 7 XX Back terminations Type 1: Female RJ11 / RJ12 Type 1: Female RJ11 / RJ12 Assembly instructions Type 2: Solder 6 Tinned through holes to solder your cable Type 2: Solder 6 tinned through holes to solder your cable Easy and Safe: No field cabling tools required 1. P ass the RJ11 / RJ12 plug through the plastic gland 2. Lateraly slide the insert on the cable 3. Fix the RJ11 / RJ12 plug in the insert , pushing on the lever 4. Insert in the metallic housing 5. Tighten the plastic gland INSERTS CODING Connection side views 145 Special RJ11 adaptor For Military & Commercial Aeronautics RJ11 adaptor only Coding Part number 35639 Y 35641 W 35643 Z 35645 N RJ11 adaptor + Self Closing Cap Amphenol Coding Part number 146 35623 N 35640 Y 35642 W 35644 Z NEW For all options: Panel Drilling 12-8 Male contact / EN3155 Coding W Coding Y Coding Z Amphenol Coding N 147 ROHS compliant N MTRJF TV Fiber optic solution - Transform your MTRJ patchcord into an Environmental Connector With MTRJFTV you can use a standard MTRJ patchcord in a metallic plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling! The MTRJ Field offers an easy system to upgrade from a standard to an environmental MTRJ. * Sealed against fluids and dust (IP68) * Shock, Vibration proof, * No cabling operation in field and no tools required for installation Applications Mechanical characteristics n Railways n Base Station n Military communication n Navy nN umber of Channels: 2 n Typical Insertion Loss: 0,5dB in MM n Durability: 500 mating/unmating cycles (changes for<0,2 dB) Part Number Code Serie MTRJ Field TV MTRJF TV 6M C G N Shell Type 6: Plug with metal backshell, plastic PG clamp 6M: Plug with metal backshell and metal PG clamp 2:Square flange receptacle 2PE:Square flange, metal backshell and plastic PG clamp 2PEM:Square flange, metal backshell and metal PG clamp 7: Jam nut receptacle 7PE: Jam nut, metal backshell and plastic PG clamp 7PEM: Jam nut, metal backshell and metal PG clamp Amphenol Cable Type Only for receptacle 0: Receptacle without backshell Only for plug C: Mini round cable 2,8 mm D:Flat duplex cable 1,6 mm S: Duplex zipcord 1,6 mm T:Flat duplex cable + Duplex zipcord for 1,6 mm - 2mm - 2,8mm Shell Finish N:Nickel plated G:Olive drab cadmium plated B:Bronze D: Black zinc cobalt Z: Olive drab zinc cobalt Polarization N:Normal A/B/C/D/E Cap Series B Protective cap type EC:For square flange receptacle ER:For jam nut receptacle F:For plug Wire type N:Nylon cord Blank: Metallic chain TV:Series Shell finish B:Bronze F:Electroless nickel plated, aluminium version W:Olive drab cadmium plated, aluminium version D:Black zinc cobalt Z:Olive drab zinc cobalt 148 EC N TV W 13 nR equested information to order MTRJ Field Patchcord Plug MTRJ: Type of fiber: Patchcord length: Drawing: Male /Female 50/125, 62,5/125, 9/125 ex 10.5m description of the product Contact us for other configuration Dismounting Tool Ordering Information MTRJFTV DM TOOL Line drawings (Dimensions in mm) 96 Max n Plug (MIL DTL 38 999 series III Size 13) 29 Max MTRJ FTV 6 X n Receptacle (MIL DTL 38 999 series III Size 13) with backshell Jam Nut receptacle with backshell Square flange receptacle with backshell MTRJ FTV 7PE/7PEM MTRJ FTV 2PE/2PEM nSquare Flange Receptacle (MIL DTL 38 999 series III Size 13) MTRJ FTV 2 XXX Panel Drilling n Jam Nut Receptacle (MIL DTL 38 999 series III Size 13) Panel Thickness 9.37 MAX 1.57 MIN, 3.18 MAX Panel Thickness 1.57 MIN, 3.18 MAX 0.875 (inches) 38.38 25.58 9.37 MAX 38.38 25.58 24.26 24.26 24.26 V 0.875 (inches) 2.31 MAX Size 13/25 Size 13/25 = 22.30 = 22.30 MTRJ FTV 7 XXX Square flange receptacle front panel mounting V 30.17 2.31 MAX 34.93 30.17 34.93 Jam nut receptacle rear panel mounting 25.58 Amphenol Square flange receptacle rear panel mounting 25.58 24.26 36.00 36.00 Panel Drilling Protective caps Protective cap for plug (nylon cord) Protective cap for receptacles (nylon cord) 149 ROHS compliant N LC Field Fiber optic solution - Transform your LC patchcord into an Environmental Connector The LC Field offers an easy system to upgrade from a standard to an environmental LC. * Sealed against fluids and dust (IP68) * Shock, vibration proof * No cabling operation in field and no tools required for installation (except 1,6mm and 2mm zipcord cable) With the patented RJStop(R) system you can use a standard LC patchcord in a metallic plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling! Applications Mechanical characteristics n Railways n Base Station n Military communication n Navy nN umber of Channels: 2 n Typical Insertion Loss: 0,5dB in MM and SM n Durability 500 mating/unmating cycles (changes for<0,2 dB) Part number code Serie Optical connector type LCF TV 6M D G N Shell Type Plug (compatible for all LC PC and APC Duplex) 6M: Plug with metal backshell and metal PG clamp Amphenol Receptacle without backshell Compatible for all LC PC Duplex (adapter blue color) 2:Square flange receptacle 7: Jam nut receptacle Compatible for all LC APC Duplex (adapter green color) 2A:Square flange receptacle 7A: Jam nut receptacle Cable Type Only for plug D:Flat duplex cable 1,6 mm E: Duplex zipcord 1,6 mm F:Flat duplex cable 2 mm G: Duplex zipcord 2 mm H:Flat duplex cable 2,8 mm I: Duplex zipcord 2,8 mm T:Flat duplex cable + Duplex zipcord for 1,6 mm - 2 mm - 2,8 mm Only for receptacle (no backshell available for receptacle) 0: Receptacle without backshell Shell Finish N:Nickel plated G:Olive drab cadmium plated B:Bronze D:Black zinc cobalt Z:Olive drab zinc cobalt Polarization N:Normal Cap Series or A / B / C / D / E B Protective cap type EC:For square flange receptacle ER:For jam nut receptacle F:For plug Wire type N:Nylon cord Blank: Metallic chain TV:Series Shell finish B:Bronze F:Electroless nickel plated, aluminium version W:Olive drab cadmium plated, aluminium version D:Black zinc cobalt Z:Olive drab zinc cobalt Corresponding connector shell size: 19 150 EC N TV W 19 nR equested information to order LC Field Patchcord Type of connector: Male /Female Type of fiber: 50/125, 62,5/125, 9/125 Patchcord length: ex 10.5m Drawing: description of the product Contact us for other configuration. nTools informations Mounting Tools: LCFTV MO TOOL: LC FIELD Mounting tools Dismounting Tools: LCFTV DM TOOL: LC FIELD Dismounting tools (To dismount the LC you need to use both dismounting and mounting tools) Line drawings (Dimensions in mm) n Plug (MIL DTL 38 999 series III Size 19) o 38,10 92 nSquare Flange Receptacle (MIL DTL 38 999 series III Size 19) Square flange receptacle rear panel mounting +0,15 22,99 -0 11,91 max 29,36 2 PLACES 29,36 26,97 2 PLACES 0,13 29,36 +0 -0,25 4x o 3,25 26,97 +0 -0,25 8 ,94 +0,20 -0,13 32 o 3,25 4x o3,25 26,97 8,9 M 4 PLACES + -0 0,20 ,1 3 40,50min Panel Drilling 3 M28x1-6g 40,50min 4,9 3,89 max n Jam Nut Receptacle (MIL DTL 38 999 series III Size 19) 49,50max P ANEL THICKNESS 1,57 MIN 3,18 MAX 33,86 35,15 9,37 MAX +0,025 -0 o 35,16 Jam nut receptacle rear panel mounting +0 +0 -0,025 33,86 -0,25 Amphenol +0 -0,13 Square flange receptacle front panel mounting o2 20,83 +0,25 36,53 -0,25 2 PLACES 47,00min 2,31 MAX +0,043 39,67 -0,041 22,30 +0,25 Panel Drilling 46,02 -0,25 Protective caps 20,24 MAX 29,62 MAX Protective cap for plug (nylon cord) 39,19 mm 25,40 mm 1,25 (inches) Protective cap for receptacles (nylon cord) 151 Glossary 10BASE-T 10 Mbps Ethernet on twisted-pair (Category 3) cable. 100BASE-T The twisted pair version of 100 Mbps Ethernet. Requires Category 5 cabling. 1000BASE-T A recent LAN standard for implementing 1000 Mbps Ethernet on Category 5 cable. Also called Gigabit Ethernet. Auto-MDIX A protocol which allows two Ethernet devices to negotiate their use of the Ethernet Transmit (Tx) and Receive (Rx) cable pairs. This allows two Ethernet devices with MDI or MDI-X connectors to connect without using a cross-over cable. Baud A unit of measurement that denotes the number of bits that can be transmitted per second. For example, if a modem is rated at 9600 baud it is capable of transmitting data at a rate of 9600 bits per second. Bandwidth The maximum capacity of a network channel. Usually expressed in bits per second (bps). Ethernet channels have bandwidths of 10, 100, and 1000 Mbps (Gigabit). bps Bits Per Second is the unit used for measuring line speed, the number of information units transmitted per second. Broadcast A transmission initiated by one station and sent to all stations on the network. Byte The amount of memory needed to store one character such as a letter or a number. Equal to 8 bits of digital information. The standard measurement unit of a file size. Category 5 A performance classification for twisted pair cables, connectors and systems. Specified to 100 MHz. Suitable for voice and data applications up to 155 Mbps. Category 5 e Also called Enhanced Category 5. A performance classification for twisted pair cables, connectors and systems. Specified to 100 MHz. Suitable for voice and data applications up to 1000 Mbps. Category 6 A performance classification for twisted pair cables, connectors and systems.Specified up to 250 MHz. CSMA/CD Carrier Sense Multiple Access/Collision Detect. The Medium Access Control (MAC) protocol used in Ethernet. Data rate The speed of the data transmission, measured in bps (bits per second) or Mbps. Duplex (Full, Half) Full duplex is a communications method that allows for the simultaneous transmission and reception of data. In Half Duplex communication, transmissions and receptions can occur in either direction but not at the same time. Ethernet The most common network protocol in use. A protocol is a set of rules enabling data communications. Ethernet can operate over several different media including fiber optic, coaxial cable and twisted-pair cable. IEEE 802.3 IEEE Working Group for CSMA/CD, the protocol used in Ethernet transmissions. IGMP snooping The ability of a switch to observe Internet Group Multicast Protocol (IGMP) traffic in order to learn IP Multicast group membership. The purpose is to restrict multicast transmissions to only those ports which have requested them. LAN Local Area Network. A network of directly-connected machines (located in close proximity), providing high speed communication over physical media such as fiber optics, coaxial cable, or twisted pair wiring. MAC Address A unique address assigned to a station interface, identifying that station on the network. With Ethernet, this is the unique 48-bit station address. Same as the physical address. Megabit (Mb) Megabit. One million bits of information, usually used to express a data transfer rate ; 1 Megabit/ second = 1Mbps. Megabyte (MB) MegaByte. A unit of data storage size which represents one million characters of information. Multicast A transmission initiated by one station to many stations of the network. Port Mirroring Port mirroring allows a switch port to monitor packets from any or all of its ports so that traffic can be analysed. Quality of Service (QoS) Some switches support QoS (per 802.1p and 802.1Q standards) whereby messages can be assigned levels of priority. QoS is important where timecritical applications can be impaired by data delays. RJ45 8-position modular jacks used on twisted pair links for Ethernet cabling. RJ-Field A wide range of connectors which allow to reinforce and seal standard RJ45 cable. See www.rjfield.com SNMP Simple Network Management Protocol. This is THE standard used for switch management programs. Spanning Tree Protocol (STP) A link management protocol providing path redundancy and preventing network loops by defining a tree to span all switches in a network. It forces redundant data paths into a standby (blocked) state. If a path malfunction occurs, the topology is reconfigured and the link reestablished by activating the standby path. TCP/IP Transmission Control Protocol/Internet Protocol. A set of protocols, resulting from ARPA efforts, used by the Internet to support services such as remote login (TELNET), file transfer (FTP) and mail (SMTP). TELNET The Internet standard protocol for remote login (terminal connection) service. TELNET allows a user at one site to interact with a remote timesharing system at another site as if the user's terminal were connected directly to the remote computer. VLAN Virtual Local Area Network. A LAN that maps stations on a basis other than location such as by department, user type or application. Managing traffic, workstations, and bandwidth can be easier with a VLAN and improve network efficiency. CABLE datas Category 5 (Cat5) Category 5E (Cat5E) Category 6 (Cat6) Category 6a (Cat6a) Category 6A (Cat6A) Category 7 (Cat7) Data rate 100 MBit/s 1 GBit/s 1 GBit/s 10 GBit/s 10 GBit/s 10 GBit/s Frequency 100 Mhz 100 Mhz 250 Mhz 500 Mhz 500 Mhz 3db 600 Mhz 4 pairs (each pair invidually shielded) 4 pairs (each pair invidually shielded) 100 m 100 m ISO/IEC 11801 amendment 2 ISO/IEC 11801 2002 category7/ class F Twisted pairs 2 or 4 pairs 4 pairs 4 pairs 4 pairs (each pair invidually shielded) Max lenght 100 m 100 m 55 m 100 m Specification ANSI/TIA-568-A 1-2001 TIA/EIA-568-5-A ANSI/TIA-568-B. 2-1 ANSI/TIA-568-B. 2-10 NOTES .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. NOTES .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. Amphenol in the world Amphenol Socapex 948, promenade de l'Arve BP29 74311 Thyez Cedex - France Phone: +33 (0)4 50 89 28 00 contact@amphenol-socapex.fr www.amphenol-socapex.com www.twitter.com/AmphenolSocapex www.linkedin.com/company/amphenol-socapex Other Amphenol Sales contacts in Europe Amphenol Sales contacts in Asia Amphenol Air LB 10 rue champ Raymond 08110 Carignan - France Phone: +33 (0)1 49 05 30 00 Amphenol Limited Whitstable, UNITED KINGDOM Thanet Way, Whitstable Kent, CT53JF - United Kingdom Phone: +44 1227 773 200 Amphenol AIR LB GmbH Am Kleinbahnhof 4 66740 Saarlouis - Germany Phone: +49 6831 981 00 Amphenol ITALY Via Barbaiana n.5 20020 Lainate - Milano - Italy Phone: +39 293 254 214 Amphenol TUCHEL ELECTRONICS August-Haeusser-Str. 10 D-74080 Heilbronn - Germany Phone: +49 7131 929 00 Amphenol BENELUX Zadelmaker 121 NL - 2401 PD Alphen aan den Rijn The Netherlands Phone: +31 172 444 903 Amphenol IBERICA Edificio Burgosol, Oficina nr 55 - Comunidad de Madrid, 35-bis Las Rozas (Madrid) - Spain Phone: +34 91 640 73 06 Amphenol POLAND & CENTER EAST EUROPE - Austria, Poland, Czech Rep., Slovakia, Romania Wiener gasse 68 - 2380 Perchtoldsdorf Austria Phone: +43 699 10396 071 Amphenol SWITZERLAND & SOUTH CENTER Switzerland, Slovenia, Serbia, Montenegro, Yugoslavia, Greece, Bulgaria 948, promenade de l'Arve BP29 74311 Thyez Cedex - France Phone: +33 (0)4 50 89 28 40 Amphenol NORDIC Phone: +46 702 129 200 (Mil/Aero) +46 76-790 95 60 (Industrial) Amphenol Daeshin 558 SongNae-Dong SoSa-Gu, Bucheon-city, Kyunggi-Do Korea 420-130 Phone: +81-32 610 3830/3845 Amphenol East Asia Ltd. No.72, Bendemeer Road, #03-32/33, Luzerne Singapore 339941 Phone: +65 6294 2128 Amphenol Interconnect India Private Limited 105 Bhosari Industrial Area - Pune 411 026 - India Phone: +91 20 3068 8304 Amphenol PCD CO. LTD Building 21, 1st Liao Keng Industrial Zone, Shi Yan Street Bao An District, Shenzhen 518108 China Phone: +86 755 8173 8000/8286 Amphenol Japan 471-1, Deba, Ritto-City, Shiga 520 3041 - Japan Phone: +81 77 553 8501 Amphenol Sales contacts in North America Amphenol Sales contacts in Other Areas Amphenol PCD 72 Cherry Hill Drive - Beverly, MA. 01915 - USA Phone: +1 978 624 3400 Amphenol Argentina Av. Callao 930 2do piso Oficina B "Plaza" C1023 - AAP Buenos Aires - Argentina Phone: +54 11 4815 6886 Amphenol Mexico Prolongacion Reforma 61-6 B2 Col Paseo de las Lomas - C.P. 013130 Mexico Phone: +52 55 5258 9984 Amphenol Australia Pty Limited 2 Fiveways Blvd., Keysborough - Melbourne Victoria 3173- Australia Phone: +61 3 8796 8888 Amphenol Russia Yaroslavskaja Street 8, 129164 Moscow - Russia Phone: +7 495 937 6341 Amphenol Do Brazil Rua Diogo Moreira, 132, 20 andar, rooms 2001-2-3 CEP: 05423-010 Sao Paulo SP - Brazil Phone: +55 11 3815 1003 Amphenol Africa 30 Impala Rd, Sandton 2146, South Africa Tel: +27 82 410 5179 Bar-Tec Ltd., ISRAEL 3 Hagavish Street, K fir-Barkan Bldg. East Industrial Zone - Kfar-Sava, 44102 - Israel Phone: +972 9 764 4100 Amphenol TURKEY Sun Plaza 15 Kat: 15 Maslak Hah. Bilim Sok. No.5 Sisli/Istanbul, 34398 - Turkey Phone: +90 212 367 92 19 Amphenol Fiber System Int. 1300 Central Expwy N, Suite 100 Allen, TX 75013 - USA Phone: +1 214 547 2400 Amphenol Aerospace Operations 40-60 Delaware street - Sidney, NY 13838-1395 - USA Phone: +1 607 563 5011 Amphenol Backplane Systems 18 Celina avenue - Nashua, NH 03063 - USA Phone: +1 603 883 5100 Amphenol Canada Corporation 605 Milner avenue - Toronto, Ontario - Canada - M1B 5X6 Phone: +1 416 291 4401 www.amphenol-socapex.com The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing. Designed by Amphenol Socapex - November 2014 Your local Contact: DOC-000075-ANG For Technical Support, please contact us: +33 (0)4 50 89 28 49 www.amphenol-socapex.com/technical_support For more information, please visit our websites: www.rjfield.com - www.usbfield.com - www.fwfield.com - www.rjswitch.com