3 Single-Coated Foam Tapes 4100 * 4300 * 4500 * 4700 Series Technical Data May, 2008 Product Description 3MTM Single-Coated Foam Tapes will adhere to a variety of substrates, including latex-painted wood, lacquered wood, enameled steel, glass, aluminum, stainless steel, acrylic, ABS, and PVC (non-plasticized) as tape adhesion is typically satisfactory within 20 minutes and continues to build with additional time. Products Note: The user is responsible for determining whether the tape is fit for a particular purpose and suitable for user's method of application. 3MTM Urethane Foam Tape Series 4100 3MTM Urethane Foam Tape 4104 3MTM Urethane Foam Tape 4108 3MTM Urethane Foam Tape 4116 1/4 in. 1/8 in. 1/16 in. (6.4 mm) thick (3.2 mm) thick (1.6 mm) thick 1/4 in. 3/8 in. 1/8 in. (6.4 mm) thick (9.5 mm) thick (3.2 mm) thick 1/4 in. 1/8 in. 1/16 in. (6.4 mm) thick (3.2 mm) thick (1.6 mm) thick 1/4 in. 1/8 in. 1/16 in. (6.4 mm) thick (3.2 mm) thick (1.6 mm) thick 3MTM Urethane Foam Tape Series 4300 3MTM Urethane Foam Tape 4314 3MTM Urethane Foam Tape 4317 3MTM Urethane Foam Tape 4318 3MTM Vinyl Foam Tape Series 4500 3MTM Vinyl Foam Tape 4504 3MTM Vinyl Foam Tape 4508 3MTM Vinyl Foam Tape 4516 3MTM Vinyl Foam Tape Series 4700 3MTM Vinyl Foam Tape 4714 3MTM Vinyl Foam Tape 4718 3MTM Vinyl Foam Tape 4726 3MTM Single-Coated Foam Tapes 4100 * 4300 * 4500 * 4700 Series Product Features 3MTM Urethane Foam Tapes Series 4100 are a natural-white, firm, high-density, open-cell foam with pressure-sensitive adhesive on one side. The acrylic adhesive offers high initial quick stick to many types of surfaces along with excellent shear strength and high temperature performance. The adhesive is protected by a 0.003 inch (0.08 mm) thick white, silicone treated paper liner and has a firm rigid open cell urethane that offers excellent cushioning characteristics while allowing air or gas vapors to pass through the open cells. This product is placed on a 1.5 in. wide common core when the tape is 3/4 in. or less in width. Skip slitting is also used for roll stability on these narrow sizes. Note: 3M urethane foam tape series 4100 may turn yellow when exposed to light. Such yellowing affects only the appearance and not the physical performance of the tapes. 3MTM Urethane Foam Tapes Series 4300 are a conformable, grey, low-density, opencell foam with pressure-sensitive acrylic adhesive on one side. The adhesive is protected by a 0.003 inch (0.08 mm) thick tan, silicone treated paper liner and has a very soft, conformable low density foam which can help seal out air, dust and light when compressed 50%. Application ideas include: recessed lighting, door, window and cabinet seals. It also can be used to help cushion, damp sound and absorb vibration in electronics such as printers, keyboards, computers, aircraft lights and automotive dash boards. This tape is available on individual cores and in blocks of 1.5 inches when the tape is 3/4 inch or less in width. Note: Extra care should be taken when handling these delicate rolls of tape to avoid damaging tape. 3MTM Vinyl Foam Tapes Series 4500 are a flexible, black, high-density, closed-cell foam with pressure-sensitive acrylic adhesive on one side. A 0.003 inch (0.08 mm) thick white, silicone treated paper liner is applied to the non-adhesive side of the foam so that the PVC can be cut to length and applied while leaving the liner in place. 3MTM Vinyl Foam Tapes Series 4700 are a flexible, black, medium-density, closedcell foam with a pressure-sensitive acrylic adhesive on one side. The adhesive is protected by a 0.004 inch (0.1 mm) thick white, silicone treated paper liner which allows for die cutting without having to laminate another liner to the foam. 3M vinyl foam tape series 4500 and 4700 are durable, flexible closed cell vinyls which can help seal out dust, light and moisture when placed under 30% compression. These vinyl tapes offer excellent aging characteristics and will remain flexible when exposed to elevated temperatures and UV light. Application ideas include: dust and moisture seal for appliances, computers, copiers and other electronic and transportation equipment. -2- 3MTM Single-Coated Foam Tapes 4100 * 4300 * 4500 * 4700 Series Typical Physical Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Test Methods 4104 3MTM Urethane Foam Tape 4108 4116 350 350 350 inch (mm) 0.250 (6.4) 0.125 (3.2) 0.062 (1.6) % 15 15 20 Natural-white Natural-white Natural-white 0.003 (0.08) 0.003 (0.08) 0.003 (0.08) White White White Units Adhesive Type:* Approximate Thickness: Thickness Tolerance: Color: Release Liner: inch (mm) Liner Color: Standard Length: yard (meter) 18 (16.5) 36 (32.9) 36 (32.9) Maximum Length: yard (meter) 25 (22.9) 50 (45.7) 100 (91.4) Standard Roll Diameter: inch (mm) 15 (380) 15 (380) 11 (280) Available Widths: (Min.-Max.) inch (mm) 1/4-36 (6-914) 1/4-46 (6-1168) 1/4-46 (6-1168) Normal Slitting Tolerance: inch (mm) 1/32 ( .8) 1/32 ( .8) 1/32 ( .8) ASTM D-3574 lb/cu ft (kg/cu m) 12 (192) 16 (256) 18 (288) ASTM D-2240 Shore 00 75 75 75 ASTM D-3574 psi (kPa) 4 (27.6) 6 (41.4) 12 (82.8) Compress Set: ASTM D-1667 % loss 8 8 12 Tensile Strength: ASTM D-3574 psi (kPa) 115 (795) 130 (895) 115 (795) ASTM D-3574 % 100 80 80 Thermal Conductivity: ASTM C-518 BTU/hr/F/sq ft/ inch (W/m-K) 0.5 (0.066) 0.5 (0.066) 0.5 (0.066) Dielectric Strength: ASTM D-149 volts/mil 50 70 90 Density: Foam with adhesive Hardness: Foam with adhesive Compression Deflection: Compress 25% Die "A" Elongation: Die "A" ASTM D-257 ohms/sq 1 x 10 6 x 10 1 x 1014 ASTM D-257 ohms/sq 1 x 1015 1 x 1015 3 x 1015 ASTM D-1056 % by Volume open cell - NA open cell - NA open cell - NA UL 94HBF File #E76581 meets requirements yes no no Foam with adhesive Flammability Recognition: F.M.V.S.S. 302 meets requirements yes yes yes F.A.R. 25.853 B-2 meets requirements yes yes no F.A.R. 25.853 B-3 meets requirements yes yes yes ASTM G21-70 Growth after 28 days none none none Surface Resistivity: 15 14 Non-adhesive side Surface Resistivity: Adhesive side Water Absorption: 30% Compression Flammability Recognition: Foam with adhesive Flammability Recognition: Foam with adhesive Flammability Recognition: Foam with adhesive Mold Resistance: Foam with adhesive *3MTM Adhesive 350 is a medium-firm acrylic adhesive that provides a continuation of high wet grab and initial adhesion. -3- 3MTM Single-Coated Foam Tapes 4100 * 4300 * 4500 * 4700 Series Typical Physical Properties (continued) Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Test Methods 4314 3MTM Urethane Foam Tape 4317 4318 430 430 430 inch (mm) 0.250 (6.4) 0.375 (9.5) 0.125 (3.2) % 15 10 30 Charcoal grey Charcoal grey Charcoal grey 0.003 (0.08) 0.003 (0.08) 0.003 (0.08) Tan Tan Tan Units Adhesive Type:* Approximate Thickness: Thickness Tolerance: Color: Release Liner: inch (mm) Liner Color: Standard Length: yard (meter) 18 (16.5) 9 (8.2) 36 (32.9) Maximum Length: yard (meter) 18 (16.5) 9 (8.2) 36 (32.9) Standard Roll Diameter: inch (mm) 15 (380) 20 (508) 15 (380) Available Widths: (Min.-Max.) inch (mm) 1/4-46 (6-1168) 3/8-46 (9-1168) 1/4-46 (6-1168) Normal Slitting Tolerance: inch (mm) 1/32 ( .8) 1/32 ( .8) 1/32 ( .8) ASTM D-3574 lb/cu ft (kg/cu m) 2 (32) 2 (32) 2 (32) ASTM D-2240 Shore 00 8 6 10 ASTM D-3574 psi (kPa) 0.3 (2.1) 0.3 (2.1) 0.3 (2.1) Compress Set: ASTM D-1667 % loss 5 5 5 Tensile Strength: ASTM D-3574 psi (kPa) 25 (170) 25 (170) 25 (170) ASTM D-3574 % 125 125 125 Thermal Conductivity: ASTM C-518 BTU/hr/F/sq ft/ inch (W/m-K) 0.3 (0.043) 0.3 (0.043) 0.3 (0.043) Dielectric Strength: ASTM D-149 volts/mil 40 40 20 Density: Foam with adhesive Hardness: Foam with adhesive Compression Deflection: Compress 25% Die "A" Elongation: Die "A" ASTM D-257 ohms/sq 2 x 12 3 x 10 6 x 1012 ASTM D-257 ohms/sq 6 x 1012 5 x 1012 1 x 1013 ASTM D-1056 % by Volume open cell - NA open cell - NA open cell - NA UL 94HBF File #E76581 meets requirements yes no no Foam with adhesive Flammability Recognition: F.M.V.S.S. 302 meets requirements yes yes no F.A.R. 25.853 B-2 meets requirements yes yes no F.A.R. 25.853 B-3 meets requirements yes yes yes ASTM G21-70 Growth after 28 days none none none Surface Resistivity: 12 12 Non-adhesive side Surface Resistivity: Adhesive side Water Absorption: 30% Compression Flammability Recognition: Foam with adhesive Flammability Recognition: Foam with adhesive Flammability Recognition: Foam with adhesive Mold Resistance: Foam with adhesive *3MTM Adhesive 430 is a medium soft adhesive system that offers good quick stick to many types of surfaces along with excellent aging and UV resistance. -4- 3MTM Single-Coated Foam Tapes 4100 * 4300 * 4500 * 4700 Series Typical Physical Properties (continued) Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Test Methods 4504 3MTM Vinyl Foam Tape 4508 4516 430 430 430 inch (mm) 0.250 (6.4) 0.125 (3.2) 0.062 (1.6) % 15 15 20 Black Black Black 0.003 (0.08) 0.003 (0.08) 0.003 (0.08) White White White Units Adhesive Type:* Approximate Thickness: Thickness Tolerance: Color: Release Liner: inch (mm) Liner Color: Standard Length: yard (meter) 18 (16.5) 36 (32.9) 36 (32.9) Maximum Length: yard (meter) 25 (22.9) 50 (45.7) 100 (91.4) Standard Roll Diameter: inch (mm) 15 (380) 15 (380) 11 (280) Available Widths: (Min.-Max.) inch (mm) 1/4-44 (6-1118) 1/4-44 (6-1118) 1/8-44 (3-1118) Normal Slitting Tolerance: inch (mm) 1/32 ( .8) 1/32 ( .8) 1/32 ( .8) ASTM D-3574 lb/cu ft (kg/cu m) 20 (320) 20 (320) 25 (400) ASTM D-2240 Shore 00 50 50 55 ASTM D-3574 psi (kPa) 4 (27.6) 4 (27.6) 4 (27.6) Compress Set: ASTM D-1667 % loss 15 15 15 Tensile Strength: ASTM D-3574 psi (kPa) 90 (620) 100 (690) 130 (895) ASTM D-3574 % 200 200 200 Thermal Conductivity: ASTM C-518 BTU/hr/F/sq ft/ inch (W/m-K) 0.3 (0.043) 0.3 (0.043) 0.3 (0.043) Dielectric Strength: ASTM D-149 volts/mil 50 100 140 Density: Foam with adhesive Hardness: Foam with adhesive Compression Deflection: Compress 25% Die "A" Elongation: Die "A" ASTM D-257 ohms/sq 1 x 10 4 x 10 1 x 1010 ASTM D-257 ohms/sq 2 x 1011 1 x 1011 2 x 1011 ASTM D-1056 % by Volume 5 5 5 UL 94HBF File #E76581 meets requirements yes yes yes Foam with adhesive Flammability Recognition: F.M.V.S.S. 302 meets requirements yes yes yes F.A.R. 25.853 B-2 meets requirements yes yes yes F.A.R. 25.853 B-3 meets requirements yes yes yes ASTM G21-70 Growth after 28 days none none none Surface Resistivity: 11 10 Non-adhesive side Surface Resistivity: Adhesive side Water Absorption: 30% Compression Flammability Recognition: Foam with adhesive Flammability Recognition: Foam with adhesive Flammability Recognition: Foam with adhesive Mold Resistance: Foam with adhesive *3MTM Adhesive 430 is a medium soft adhesive system that offers good quick stick to many types of surfaces along with excellent aging and UV resistance. -5- 3MTM Single-Coated Foam Tapes 4100 * 4300 * 4500 * 4700 Series Typical Physical Properties (continued) Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Test Methods 4714 3MTM Vinyl Foam Tape 4718 4726 430 430 430 inch (mm) 0.250 (6.4) 0.125 (3.2) 0.062 (1.6) % 15 20 30 Black Black Black 0.004 (0.10) 0.004 (0.10) 0.004 (0.10) White White White Units Adhesive Type:* Approximate Thickness: Thickness Tolerance: Color: Release Liner: inch (mm) Liner Color: Standard Length: yard (meter) 18 (16.5) 36 (32.9) 36 (32.9) Maximum Length: yard (meter) 25 (22.9) 50 (45.7) 100 (91.4) Standard Roll Diameter: inch (mm) 15 (380) 15 (380) 11 (280) Available Widths: (Min.-Max.) inch (mm) 1/4-46 (6-1168) 1/4-46 (6-1168) 1/8-46 (3-1168) Normal Slitting Tolerance: inch (mm) 1/32 ( .8) 1/32 ( .8) 1/32 ( .8) ASTM D-3574 lb/cu ft (kg/cu m) 14 (225) 18 (288) 20 (230) ASTM D-2240 Shore 00 40 50 50 ASTM D-3574 psi (kPa) 2 (13.8) 2 (13.8) 3 (20.7) Compress Set: ASTM D-1667 % loss 5 5 15 Tensile Strength: ASTM D-3574 psi (kPa) 75 (515) 95 (650) 130 (895) ASTM D-3574 % 200 200 200 Thermal Conductivity: ASTM C-518 BTU/hr/F/sq ft/ inch (W/m-K) 0.3 (0.043) 0.3 (0.043) 0.3 (0.043) Dielectric Strength: ASTM D-149 volts/mil 50 60 80 Density: Foam with adhesive Hardness: Foam with adhesive Compression Deflection: Compress 25% Die "A" Elongation: Die "A" ASTM D-257 ohms/sq 3 x 10 5 x 10 2 x 1011 ASTM D-257 ohms/sq 2 x 1011 2 x 1011 4 x 1011 ASTM D-1056 % by Volume 10 10 10 UL 94HBF File #E76581 meets requirements yes yes yes Foam with adhesive Flammability Recognition: F.M.V.S.S. 302 meets requirements yes yes yes F.A.R. 25.853 B-2 meets requirements yes yes yes F.A.R. 25.853 B-3 meets requirements yes yes yes ASTM G21-70 Growth after 28 days none none none Surface Resistivity: 10 10 Non-adhesive side Surface Resistivity: Adhesive side Water Absorption: 30% Compression Flammability Recognition: Foam with adhesive Flammability Recognition: Foam with adhesive Flammability Recognition: Foam with adhesive Mold Resistance: Foam with adhesive *3MTM Adhesive 430 is a medium soft adhesive system that offers good quick stick to many types of surfaces along with excellent aging and UV resistance. -6- 3MTM Single-Coated Foam Tapes 4100 * 4300 * 4500 * 4700 Series Environmental Exposure Resistance to high temperature service conditions 3MTM Urethane Foam - 200F (93C) continuous Tape Series 4100 350F (177C) - 30 minutes maximum time 3MTM Urethane Foam - 150F (66C) continuous Tape Series 4300 250F (121C) - 30 minutes maximum time 3MTM Vinyl Foam - 150F (66C) continuous Tape Series 4500 250F (121C) - 30 minutes maximum time 3MTM Vinyl Foam - 150F(66C) continuous Tape Series 4700 250F (121C) - 30 minutes maximum time Resistance to low temperature service conditions 3M urethane foam - Cold flex at 0F (-18C) no cracks* tape series 4100 3M urethane foam - Cold flex at -20F (-29C) no cracks* tape series 4300 3M viny foam - Cold flex at 0F (-18C) no cracks* tape series 4500 3M vinyl foam - Cold flex at 0F (-18C) no cracks* tape series 4700 *Tape slowly bent around a 1/4 in. diameter mandrel Solvent/Fuel Resistance* Solvent/Fuel 3M urethane foam tape series 4100 Adhesive Foam 3M urethane foam tape series 4300 Adhesive Foam 3M vinyl foam tape series 4500 Adhesive Foam 3M vinyl foam tape series 4700 Adhesive Foam Acetone Softens Softens No effect No effect Softens Swells Softens Swells Ammonia Cleaner No effect No effect No effect No effect No effect No effect No effect No effect Engine Oil No effect No effect No effect No effect No effect No effect No effect No effect Gasoline Softens Swells Softens No effect No effect No effect No effect No effect JP-4 (jet fuel) Softens Swells Softens No effect No effect No effect No effect No effect MEK Softens Softens Softens Swells Softens Swells Softens Swells Mineral Spirits No effect Swells Softens No effect No effect No effect No effect No effect Soapy Water No effect No effect No effect No effect No effect No effect No effect No effect *Visual observations of tape bonded to steel panels and immersed totally in solvent/fuel for 24 hours. Application Techniques * Bond strength is dependent upon the amount of adhesive-to-surface contact. Firm application pressure develops better adhesive contact and helps improve bond strength. * To obtain optimum adhesion, the bonding surface must be clean, dry, and well unified. Some typical surface cleaning solvents are isopropyl alcohol and heptane.* *Be sure to follow the solvent manufacturer's precautions and directions for use when handling solvents. * Ideal tape application temperature range is 70F to 100F (21C to 38C). Initial tape application to surfaces at temperatures below 50F (10C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory. Storage Store in the original cartons at 60-80F (15-27C) and 50% relative humidity. Shelf Life 18 months from date of manufacture. -7- 3MTM Single-Coated Foam Tapes 4100 * 4300 * 4500 * 4700 Series Product Use All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M's control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user's method of application. Warranty and Limited Remedy Unless stated otherwise in 3M's product literature, packaging inserts or product packaging for individual products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different warranties as stated on product literature, package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's application. If the 3M product is defective within the warranty period, your exclusive remedy and 3M's and seller's sole obligation will be, at 3M's option, to replace the product or refund the purchase price. Limitation of Liability Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. ISO 9001: 2000 This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2000 standards. 3 Industrial Adhesives and Tapes Division 3M Center, Building 21-1W-10, 900 Bush Avenue St. Paul, MN 55144-1000 800-362-3550 * 877-369-2923 (fax) www.3M.com/industrial Recycled Paper 40% pre-consumer 10% post-consumer -8- 3M is a trademark of the 3M Company. Printed in U.S.A. (c)3M 2008 70-0709-4401-5 (5/08) Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 3M: 4318-2"X36YD TAPE 4104-3/4"x18yd 4108-1/4"x36yd 4116-1/4"x36yd 4504-1"x18yd 4508-1"x36yd 4516-1"x36yd 4714-1/2"x18yd 4714-3/4"x18yd 4714-1"x18yd 4718-1/2"x36yd 4718-1"x36yd 4726 1/2"X36YD 4726 1" 4726 3/4" 4718 4104 4508-3/8x36 4516-1/4x36 4516-3/8x36 4314-1/4x18 4314-3/18x18 4504-2x18 4504-3/4x18 45081/4x36 4508-2x36 4318 4516 4314-2"