Surface Mount Switch GaAs GSWA-4-30DR 50W SP4T, TTL Driver, Absorptive Maximum Ratings Operating Temperature Storage Temperature DC to 3 GHz Features * * * * * -30C to 85C -55C to 100C Input Power see table Vcontrol (V+) +0.4V wideband, DC to 3 GHz high isolation, 37 dB typ. low video leakage, 30 mVp-p typ. integral TTL driver aqueous washable CASE STYLE: AN1102 PRICE: $19.95 ea. QTY (1-9) Permanent damage may occur if any of these limits are exceeded. Applications Pin Connections RF IN RF OUT 1 RF OUT 2 RF OUT 3 RF OUT 4 CONTROL 1 CONTROL 2 CONTROL 3 CONTROL 4 +5V (V+) -5V (V-) GROUND * cellular, PCN * satellite communication * receiver antenna switching 1 25 21 9 5 15 16 13 14 12 18 all other pins Electrical Specifications FREQ. (GHz) fL DC fU 3 INSERTION LOSS (dB) DC-500 MHz Typ. Max. 1.25 1.8 500-2000 MHz Typ. Max. 2.0 3.0 1dB COMPR. (dBm) 2000-3000 MHz Typ. Max. 2.75 3.9 DC-500 MHz Typ. 23* IN-OUT ISOLATION (dB) 500-2000 2000-3000 MHz MHz Typ. Typ. 25 25 DC-500 MHz Typ. Min. 50 40 500-2000 MHz Typ. Min. 37 32 2000-3000 MHz Typ. Min. 31 26 *1dB compression gradually decreases to 10 dBm @ 1 MHz Outline Drawing Additional Specifications *Control Voltage Low Threshold High Threshold Control Current, mA Positive Supply V. (V+) Negative Supply V. (V-) Positive Supply Current, mA Negative Supply Current, mA VSWR(:1) PC B L and Patter n Rise/Fall time (10%-90%), ns Switching time, 50% of Control to 90% RF (Turn-on), ns 10% RF (Turn-off), ns **Video Leakage, mVp-p 0/+5V Control MTBF, hrs @85C case Max. Input Power, dBm Steady state control As modulator Suggested L ayout, T olerance to be within .002 CONTROL LOGIC 0/V+ 0.8 max. 3.5 min. High V: 0.2 max.; Low V: 0.02 max. +50.5 -50.25 4 max 20 max. 1.28 typ., ON DC-2 GHz 1.24 typ.,OFF DC-2 GHz 25 typ. Control Ports RF outputs 1 2 3 4 1 2 3 4 Low High High High On Off Off Off High Low High High Off On Off Off High High Low High Off Off On Off High High High Low Off Off Off On 45 typ. 30 typ. DC-100 MHz +20 +8 30X106 100-500 MHz +24 +14 500-3000 MHz +30 +20 * Do not apply control voltage high prior to applying V+ Outline Dimensions ( inch mm ) ** Video leakage or break through is defined as leakage of TTL switching signal to RF output ports. All RF pins must be DC blocked or held at 0V DC. A __ __ B .487 12.37 C .06 1.55 D .025 0.64 E __ __ F .020 0.51 G .050 1.27 H .040 1.02 J .022 0.56 K .087 2.21 L .441 11.20 M .300 7.62 N .236 5.99 P .138 3.51 Q .03 0.76 R .094 2.39 S wt .094 grams 2.39 0.71 Electrical Schematic Demo Board MCL P/N: TB-91 Suggested PCB Layout (PL-221) Mini-Circuits (R) ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site (R) Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp. REV. B M116291 GSWA-4-30DR WP/CP 090810 Page 1 of 2 GSWA-4-30DR Typical Performance Data FREQ. (MHz) ON INSERTION LOSS (dB) TTL Low @ 0V) IN-OUT IN -- x -- x ON -- x 0.025 0.018 0.017 0.015 0.010 0.012 0.014 0.011 0.018 0.019 0.023 0.025 0.018 0.025 0.025 0.026 0.030 0.037 0.048 81.27 73.11 72.78 75.11 68.08 60.51 56.91 53.59 50.26 48.06 45.78 43.73 41.79 40.34 39.17 38.05 37.08 36.32 35.55 4.21 4.37 6.25 4.71 5.57 1.69 1.13 1.34 0.95 0.56 0.44 0.35 0.33 0.40 0.37 0.41 0.32 0.30 0.34 1.04 1.06 1.05 1.05 1.14 1.21 1.25 1.30 1.39 1.43 1.44 1.50 1.57 1.49 1.64 1.69 1.65 1.65 1.84 1.05 1.04 1.05 1.06 1.11 1.16 1.21 1.28 1.32 1.35 1.36 1.39 1.42 1.40 1.48 1.50 1.68 1.75 2.00 GSWA-4-30DR INSERTION LOSS OFF -- x 1.09 1.08 1.08 1.07 1.07 1.08 1.06 1.08 1.09 1.10 1.12 1.12 1.12 1.15 1.12 1.14 1.13 1.11 1.13 80 2.5 2.0 1.5 1.0 0.5 70 60 50 40 0.0 30 0 600 1200 1800 2400 3000 0 600 1200 1800 FREQUENCY (MHz) FREQUENCY (MHz) 2.0 OUT GSWA-4-30DR ISOLATION at RF level of 0 dBm 90 ISOLATION (dB) INSERTION LOSS (dB) 3.0 at RF level of 0 dBm 0.58 0.66 0.77 0.82 0.97 1.10 1.23 1.31 1.44 1.49 1.61 1.70 1.76 1.92 2.05 2.18 2.36 2.57 2.88 VSWR -- x 10 28 64 100 260 420 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 OFF ISOLATION (dB) TTL High @ 5V) IN-OUT at RF level of 0 dBm IN 2400 3000 GSWA-4-30DR VSWR OUT-ON OUT-OFF VSWR 1.8 1.6 1.4 1.2 1.0 0 600 1200 1800 2400 3000 FREQUENCY (MHz) Mini-Circuits (R) ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site (R) Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp. Page 2 of 2