Type: ZB32−16
Article No.: 278452
Ordering information
Overload release, min. – max. IrA 10 – 16
Auxiliary contacts M = Make 1 M
Auxiliary contacts B = Break 1 B
For use with
DILM17, DILM25,
DILM32,
DIULM17, DIULM25,
DIULM32,
SDAINLM30,
SDAINLM45,
SDAINLM55
Short−circuit protection Type “1” coordination gG/gL A 63
Short−circuit protection Type “2” coordination gG/gL A 35
Contact sequence
Note concerning the product
Overload release: tripping class 10 A
Short−circuit protection: Observe the maximum permissible fuse of the contactor with direct device mounting.
Suitable for protection of EEx e−motors. EC prototype test certification on request.
1
Notes concerning the product group
Fitted directly to the contactor Separate mounting
1 Contactor 051608
2 Bases 278473
General
Standards IEC/EN 60947, VDE 0660, UL, CSA
Climatic proofing Damp heat, constant, to IEC 60068−2−78;
Damp heat, cyclic, to IEC 60068−2−30
Ambient temperature
Open °C −25/50
Enclosed °C −25/40
Temperature compensation Continuous
Weight
Mechanical shock resistance half−sinusoidal shock 10
ms to IEC 60068−2−27 g 10
Protection type IP00
Protection against direct contact when actuated from
front (IEC 536) Finger− and back−of−hand proof
Main conducting paths
Rated impulse withstand voltage Uimp V AC 6000
Overvoltage category/pollution degree III/3
Rated insulation voltage
AC UiV AC 690
Rated operational voltage UeV AC 690
Safe isolation to VDE 0106 Part 101 and Part 101/A1
Between auxiliary contacts and main contacts V AC 440
Between main circuits V AC 440
Overload release setting range A 0,1 – 32
Temperature compensation residual error > 20ºC %/K f 0.25
Current heat loss (3 conductors)
Lower value of the setting range W 2,5
Maximum setting W 6
2
Terminal capacities
Solid mm22 × (1 – 6)
Flexible with ferrule mm22 × (1 – 4)
2 × (1 – 6)
Solid or stranded AWG 14 – 8
Terminal screw M4
Tightening torque Nm 1.8
Tools
Pozidriv screwdriver Size 2
Standard screwdriver mm 1 × 6
Auxiliary and control circuits
Rated impulse withstand voltage Uimp V 6000
Overvoltage category/pollution degree III/3
Terminal capacities
Solid mm22 × (0.75 – 4)
Flexible with ferrule mm2 2 × (0.75 – 2.5)
Solid or stranded AWG 2 × (18 – 12)
Terminal screw M3.5
Tightening torque Nm 0.8 – 1.2
Tools
Pozidriv screwdriver Size 2
Standard screwdriver mm 1 × 6
Rated insulation voltage UiV AC 500
Rated operational voltage UeV AC 500
Safe isolation to VDE 0106 Part 101 and Part 101/A1
between the auxiliary contacts V AC 240
Conventional thermal current Ith A 6
Rated operational current
AC–15
Make contact
120 V IeA 1,5
240 V IeA 1,5
415 V IeA 0,5
500 V IeA 0,5
Break contact
120 V IeA 1,5
240 V IeA 1,5
415 V IeA 0,9
500 V IeA 0,8
DC−13 L/R f 15 ms
24 V IeA 0,9
60 V IeA 0,75
110 V IeA 0,4
220 V IeA 0,2
Short−circuit rating without welding
3
max. fuse A gG/gL 6
Notes
Ambient temperature: operating range to
IEC/EN 60947, PTB: −5°C to +50°C
Rated operational current: Making and
breaking conditions to DC−13, L/R constant
as stated
See overlay: “Fuses” for short−circuit rating
time/current characteristic (please enquire)
6 mm² flexible with ferrules to DIN 46228
Dimensions
With base ZB32−XEZ
Dimensions
Dimensions
4
Moeller GmbH, Hein−Moeller−Str. 7−11, D−53115 Bonn
E−Mail: catalog@moeller.net, Internet: www.moeller.net, http://catalog.moeller.net
Copyright 2005 by Moeller GmbH. Subject to modifications. HPL−C2005GB−INT V3.0
5
