BEI Edcliff Instruments Division
Unique products
The Model 5-23 Pressure T ransmitter is uniquely designed for
use with FMC-WECO® Wing Unions in extremely rugged,
high-pressure oil patch applications.
The Model 5-23 utilizes a Sputtered Thin Film sensing ele-
ment mated to the WECO Male Sub, that are designed on a
Finite Element Analysis tool, with the specific intent of
eliminating long-term signal drift in the field. This unique
design completely isolates the sensing element and the
signal conditioning electronics from the severe vibration,
shock, and impact stresses inherent in installation and
operation in drilling, mud logging, acidizing, cementing, and
other completion and stimulation applications.
This isolation provides an instrument that will drift less than
0.5% FSO/year! This eliminates the need for field or shop
recalibration, which shortens the down time of a tool or
system thus reducing the cost of ownership.
All Model 5-23 configurations have the most robust EMI/RFI
protection in the industry. The Model 5-23 will not shift, drift,
or fail in an EMI/RFI environment of greater than 100 volts/
meter up to 1.0 GHz.
The Model 5-23 is hermetically sealed by welding and
conforms to NEMA 4 & 4X enclosure requirements.
The Model 5-23 is available in MP35N/Hastelloy C-22
configurations for service in highly reactive and/or corrosive
media and are compliant with NACE Standard MR0175-97.
Applications
Contact factory or local sales representative for outline drawings
of the various configurations and the electrical pinouts.
WECO Wing Union
Pressure Transmitter
Features
Model 5-23
Wellhead Measur ement
Drilling
Acidizing
Mud Logging
Well Stimulation
Cementing
Acid & Chemical Fracturing
Standpipe Applications
All-Welded Construction, NEMA 4 and 4X
Exceptional Long-term Stability
No Field or Shop Recalibration Needed
Compliant with MRO175-97 for Corr osive Service
Model 5-23
PERFORMANCE
OUTPUT SIGNAL 4-20 mA
ZERO & SPAN OFFSETS ±1.0% FSO @ 21°C
ACCURACY L,H & R ±0.50% of FSO @ 21°C (BFSL)
LONG-TERM ±0.5% FSO/Year
STABILITY
COMPENSATED -30° to +85°C (-22° to +185°F)
TEMPERATURE -40° to +125°C (-40° to 256°F) Optional
TEMPERATURE EFFECT ±1.0% FSO Over the Compensated
ON ZERO & SPAN Temperature Range
OPERATING
INPUT POWER 8 - 30 VDC
INSULATION 50 MEGOHMS @ 100 VDC
RESISTANCE
DIELECTRIC 500 VAC, 50-60 Hz, 5 mA MAX,
STRENGTH 1 MIN.
REVERSE POLARITY Current Limiting
PROOF PRESSURE 150% of Rated Range
BURST PRESSURE 200% of Rated Range or the Maximum
Rating of the Weco Wing Union
WEIGHT 2.4 Kilos (5.0 lbs)
ENVIRONMENTAL
MAXIMUM OPERATING -54° to +120°C (-65° to +250°F)
TEMPERATURE
EMI/RFI 100 Volts/Meter up to 1.0 Ghz
WETTED PARTS 17-4 PH Cres & 316 Cres
MP35N & Hastelloy C-22 Optional
ENCLOSURE NEMA 4 & 4X
VIBRATION 15 g’s 10-2000 Hz
SHOCK 100 g’s for 11 Milliseconds, Half-sine
CERTIFICATION
WECO Wing Union
Pressure Transmitter
13100 Telfair Avenue Sylmar, CA 91342-3573
(818) 362-7151 Fax: (818) 362-2487
E-mail: sales@beipressure.com
A Subsidiary of BEI TECHNOLOGIES, INC.
Product Specifications
IAW ANSI/ASA S37.1-75
Ordering Information
5 - 2 3 X - X X X X - X X
INSTRUMENT
FAMILY
5 = Sputtered
Thin Film
Strain Gage
SENSOR TYPE
23 = Weco Wing Union
Pressure Transmitter
4-20 mA
SERVICE
0 = Standard
1 = Sour Gas
PRESSURE RANGES
0 = 5,000 PSI
1 = 10,000 PSI
2 = 15,000 PSI
3 = 20,000 PSI
4 = 6,000 PSI
PRESSURE FITTINGS
0 = FMC-WECO 2.0” 1502
1 = FMC-WECO 2.0” 2002
2 = FMC-WECO 3.0” 2002
ELECTRICAL CONNECTIONS
0 = PT06E-10-6P
1 = 1/2NPT Cable Conduit
2 = Glenair GC379-2-14S-2P
3 = Brad Harrison 61090-SS, Cres
4 = Jupiter REC-M-10P-N-04-016
CUSTOM CONFIGURATIONS
00 = No Custom Requirements
03 = 0-5 VDC Output
04 = -54° to +125°C (-65° to +250°F) Optional Temperature
All Model 5-23 configurations are shipped with protective caps
& attachment chains for appropriate connectors.
Carrying handle is optional.
DOC 128771 (09/98)