Model 5-23 WECO Wing Union Pressure Transmitter BEI Edcliff Instruments Division The Model 5-23 Pressure Transmitter is uniquely designed for use with FMC-WECO (R) Wing Unions in extremely rugged, high-pressure oil patch applications. The Model 5-23 utilizes a Sputtered Thin Film sensing element mated to the WECO Male Sub, that are designed on a Finite Element Analysis tool, with the specific intent of eliminating long-term signal drift in the field. This unique design completely isolates the sensing element and the signal conditioning electronics from the severe vibration, shock, and impact stresses inherent in installation and operation in drilling, mud logging, acidizing, cementing, and other completion and stimulation applications. This isolation provides an instrument that will drift less than 0.5% FSO/year! This eliminates the need for field or shop recalibration, which shortens the down time of a tool or system thus reducing the cost of ownership. All Model 5-23 configurations have the most robust EMI/RFI protection in the industry. The Model 5-23 will not shift, drift, or fail in an EMI/RFI environment of greater than 100 volts/ meter up to 1.0 GHz. U n i q u e products Applications Wellhead Measurement The Model 5-23 is hermetically sealed by welding and conforms to NEMA 4 & 4X enclosure requirements. Drilling The Model 5-23 is available in MP35N/Hastelloy C-22 configurations for service in highly reactive and/or corrosive media and are compliant with NACE Standard MR0175-97. Mud Logging Acidizing Well Stimulation Cementing Acid & Chemical Fracturing Standpipe Applications Features All-Welded Construction, NEMA 4 and 4X Exceptional Long-term Stability No Field or Shop Recalibration Needed Compliant with MRO175-97 for Corrosive Service Contact factory or local sales representative for outline drawings of the various configurations and the electrical pinouts. Model 5-23 WECO Wing Union Pressure Transmitter Product Specifications IAW ANSI/ASA S37.1-75 Ordering Information PERFORMANCE OUTPUT SIGNAL 4-20 mA ZERO & SPAN OFFSETS 1.0% FSO @ 21C ACCURACY L,H & R 0.50% of FSO @ 21C (BFSL) LONG-TERM STABILITY 0.5% FSO/Year COMPENSATED TEMPERATURE -30 to +85C (-22 to +185F) -40 to +125C (-40 to 256F) Optional TEMPERATURE EFFECT ON ZERO & SPAN 1.0% FSO Over the Compensated Temperature Range 5-23 X-XX XX - XX INSTRUMENT FAMILY 5 = Sputtered Thin Film Strain Gage SENSOR TYPE 23 = Weco Wing Union Pressure Transmitter 4-20 mA OPERATING INPUT POWER 8 - 30 VDC INSULATION RESISTANCE 50 MEGOHMS @ 100 VDC DIELECTRIC STRENGTH 500 VAC, 50-60 Hz, 5 mA MAX, 1 MIN. REVERSE POLARITY Current Limiting PROOF PRESSURE 150% of Rated Range BURST PRESSURE 200% of Rated Range or the Maximum Rating of the Weco Wing Union WEIGHT 2.4 Kilos (5.0 lbs) ENVIRONMENTAL MAXIMUM OPERATING TEMPERATURE -54 to +120C (-65 to +250F) EMI/RFI 100 Volts/Meter up to 1.0 Ghz WETTED PARTS 17-4 PH Cres & 316 Cres MP35N & Hastelloy C-22 Optional ENCLOSURE NEMA 4 & 4X VIBRATION 15 g's 10-2000 Hz SHOCK 100 g's for 11 Milliseconds, Half-sine SERVICE 0 = Standard 1 = Sour Gas PRESSURE RANGES 0 = 5,000 PSI 1 = 10,000 PSI 2 = 15,000 PSI 3 = 20,000 PSI 4 = 6,000 PSI PRESSURE FITTINGS 0 = FMC-WECO 2.0" 1502 1 = FMC-WECO 2.0" 2002 2 = FMC-WECO 3.0" 2002 ELECTRICAL CONNECTIONS 0 = PT06E-10-6P 1 = 1/2NPT Cable Conduit 2 = Glenair GC379-2-14S-2P 3 = Brad Harrison 61090-SS, Cres 4 = Jupiter REC-M-10P-N-04-016 CUSTOM CONFIGURATIONS 00 = No Custom Requirements 03 = 0-5 VDC Output 04 = -54 to +125C (-65 to +250F) Optional Temperature All Model 5-23 configurations are shipped with protective caps & attachment chains for appropriate connectors. Carrying handle is optional. CERTIFICATION 13100 Telfair Avenue Sylmar, CA 91342-3573 (818) 362-7151 Fax: (818) 362-2487 E-mail: sales@beipressure.com DOC 128771 (09/98) A Subsidiary of BEI TECHNOLOGIES,INC.