PHOTOCOUPLER PS2832-1,-4,PS2833-1,-4 HIGH COLLECTOR TO EMITTER VOLTAGE 4, 16-PIN SSOP PHOTOCOUPLER -NEPOC Series- DESCRIPTION The PS2832-1, -4 and PS2833-1, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon darlington-connected phototransistor. The package is a Shrink SOP (Small Outline Package) type for high density mounting applications. FEATURES * High collector to emitter voltage (VCEO = 300 V: PS2832-1, -4) (VCEO = 350 V: PS2833-1, -4) * Small and thin package (4, 16-pin SSOP, Pin pitch 1.27 mm) * High isolation voltage (BV = 2 500 Vr.m.s.) * High current transfer ratio (CTR = 2 000% TYP.) PIN CONNECTION (Top View) PS2832-1, PS2833-1 4 3 * Ordering number of tape product: PS2832-1-F3, F4, PS2832-4-F3, F4 1. Anode 2. Cathode 3. Emitter 4. Collector PS2833-1-F3, F4, PS2833-4-F3, F4 <R> * Safety standards: PS2832-1, -4 * UL approved: No. E72422 * BSI approved: No. 8315, 8316 * CSA approved: No. CA 101391 1 2 PS2832-4, PS2833-4 16 15 14 13 12 11 10 9 * DIN EN60747-5-2 (VDE0884 Part2) approved No. 40008905 (Option) PS2833-1, -4 * UL approved: No. E72422 * CSA approved: No. CA 101391 * DIN EN60747-5-2 (VDE0884 Part2) approved No. 40008905 (Option) 1 2 3 4 5 6 7 8 1. 3. 5. 7. 2. 4. 6. 8. 9. 11. 13. 15. 10. 12. 14. 16. Anode Cathode Emitter Collector APPLICATIONS * Hybrid IC * Telephone/Telegraph Receiver * FAX Document No. PN10257EJ03V0DS (3rd edition) Date Published November 2008 NS The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. PS2832-1,-4,PS2833-1,-4 PACKAGE DIMENSIONS (UNIT: mm) PS2832-1 PS2833-1 PS2832-4 PS2833-4 2.70.3 7.00.3 4.4 4.4 0.10.1 2.0+0.3 -0.2 0.50.3 1.27 0.40.1 0.12 M <R> 0.15+0.10 -0.05 7.00.3 0.15+0.10 -0.05 2.00.1 0.10.1 10.30.3 0.40+0.10 -0.05 0.12 M 0.50.3 1.27 MARKING EXAMPLE PS2832-4 PS2833-4 PS2832-1 PS2833-1 32 831 Assembly Lot *1 Last number of type No. : 32/33 No. 1 pin Mark 8 31 N L 8 31 Week Assembled Year Assembled (Last 1 Digit) *1 2 Country Assembled Type Number Assembly Lot PS2832-4 NL831 Week Assembled Year Assembled (Last 1 Digit) In-house Code (L: Pb-Free) : Pb-Free Rank Code Data Sheet PN10257EJ03V0DS PS2832-1,-4,PS2833-1,-4 <R> ORDERING INFORMATION Part Number Order Number Solder Plating Specification Pb-Free Packing Style Safety Standard Approval PS2832-1 PS2832-1-A 50 pcs (Tape 50 pcs cut) Standard products PS2832-1-F3 PS2832-1-F3-A Embossed Tape 3 500 pcs/reel (UL, BSI, CSA PS2832-1-F4 PS2832-1-F4-A PS2832-4 PS2832-4-A Magazine Case 45 pcs PS2832-4-F3 PS2832-4-F3-A Embossed Tape 2 500 pcs/reel PS2832-4-F4 PS2832-4-F4-A PS2832-1-V PS2832-1-V-A 50 pcs (Tape 50 pcs cut) DIN EN60747-5-2 PS2832-1-V-F3 PS2832-1-V-F3-A Embossed Tape 3 500 pcs/reel (VDE0884 Part2) PS2832-1-V-F4 PS2832-1-V-F4-A PS2832-4-V PS2832-4-V-A Magazine Case 45 pcs PS2832-4-V-F3 PS2832-4-V-F3-A Embossed Tape 2 500 pcs/reel PS2832-4-V-F4 PS2832-4-V-F4-A PS2833-1 PS2833-1-A 50 pcs (Tape 50 pcs cut) Standard products PS2833-1-F3 PS2833-1-F3-A Embossed Tape 3 500 pcs/reel (UL, CSA approved) PS2833-1-F4 PS2833-1-F4-A PS2833-4 PS2833-4-A Magazine Case 45 pcs PS2833-4-F3 PS2833-4-F3-A Embossed Tape 2 500 pcs/reel PS2833-4-F4 PS2833-4-F4-A PS2833-1-V PS2833-1-V-A 50 pcs (Tape 50 pcs cut) DIN EN60747-5-2 PS2833-1-V-F3 PS2833-1-V-F3-A Embossed Tape 3 500 pcs/reel (VDE0884 Part2) PS2833-1-V-F4 PS2833-1-V-F4-A PS2833-4-V PS2833-4-V-A Magazine Case 45 pcs PS2833-4-V-F3 PS2833-4-V-F3-A Embossed Tape 2 500 pcs/reel PS2833-4-V-F4 PS2833-4-V-F4-A Application *1 Part Number PS2832-1 approved) PS2832-4 PS2832-1 Approved (Option) PS2832-4 PS2833-1 PS2833-4 PS2833-1 Approved (Option) PS2833-4 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10257EJ03V0DS 3 PS2832-1,-4,PS2833-1,-4 ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Ratings Parameter Symbol Unit PS2832-1 Diode PS2832-4 PS2833-4 Forward Current (DC) IF 50 mA/ch Reverse Voltage VR 6 V Power Dissipation Derating Power Dissipation Peak Forward Current Transistor PS2833-1 *1 PD/C 0.6 0.8 mW/C PD 60 80 mW/ch IFP 1 Collector to Emitter Voltage VCEO Emitter to Collector Voltage VECO 0.3 V IC 60 mA/ch PC/C 1.2 mW/C PC 120 mW/ch BV 2 500 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +150 C Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 300 350 A/ch 300 *1 PW = 100 s, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together (PS2832-1, PS2833-1). Pins 1-8 shorted together, 9-16 shorted together (PS2832-4, PS2833-4). 4 Data Sheet PN10257EJ03V0DS 350 V PS2832-1,-4,PS2833-1,-4 ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Diode Transistor Symbol Conditions Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1 MHz Collector to Emitter Dark ICEO IF = 0 mA, VCE = 300 V CTR IF = 1 mA, VCE = 2 V VCE (sat) IF = 1 mA, IC = 2 mA MIN. TYP. MAX. Unit 1.2 1.4 V 5 A 15 pF 400 nA 4 500 % 1.0 V Current Coupled Current Transfer Ratio 400 2 000 (IC/IF) Collector Saturation Voltage RI-O VI-O = 1 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz 0.4 pF VCC = 5 V, IC = 10 mA, RL = 100 20 s Rise Time Fall Time <R> Isolation Resistance *1 *1 tr 10 11 tf 5 *1 Test circuit for switching time VCC Pulse Input PW = 1 ms Duty cycle = 1/10 Input IF In monitor ton td VOUT 50 toff ts RL = 100 90% Output 10% tr Data Sheet PN10257EJ03V0DS tf 5 PS2832-1,-4,PS2833-1,-4 TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 0.8 mW/C 60 PS2832-1 PS2833-1 40 0.6 mW/C 20 0 25 100 75 50 120 100 80 PS2832-1, -4 PS2833-1, -4 60 1.2 mW/C 40 20 25 0 100 75 50 100 Ambient Temperature TA (C) Ambient Temperature TA (C) FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 100 TA = +100C +60C +25C 50 Forward Current IF (mA) Transistor Power Dissipation PC (mW) PS2832-4 PS2833-4 80 Collector Current IC (mA) Diode Power Dissipation PD (mW) 100 10 5 0C -25C -50C 1 0.5 5 mA 3 mA 2 mA 50 1 mA 10 5 IF = 0.5 mA 0.1 Collector to Emitter Dark Current ICEO (nA) 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1 0.4 1.5 0.8 1.0 1.2 1.4 1.6 Forward Voltage VF (V) Collector Saturation Voltage VCE (sat) (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 100 100 000 VCEO = 300 V CTR = 1 068% 2 290% 4 360% 1 000 100 10 1 -50 -25 3 mA 5 mA Collector Current IC (mA) 10 000 0 25 50 75 100 2 mA 50 1 mA 10 5 IF = 0.5 mA 1 0 1 2 3 4 Collector to Emitter Voltage VCE (V) Ambient Temperature TA (C) Remark The graphs indicate nominal characteristics. 6 0.6 Data Sheet PN10257EJ03V0DS 5 PS2832-1,-4,PS2833-1,-4 CURRENT TRANSFER RATIO vs. FORWARD CURRENT 1.4 4 500 VCE = 2 V 1.2 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25C, IF = 1 mA, VCE = 2 V 0.2 0.0 -50 -25 0 25 75 50 Current Transfer Ratio CTR (%) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 4 000 3 500 3 000 Sample A B C 2 500 2 000 1 500 1 000 500 0 0.1 100 0.5 5 10 40 Forward Current IF (mA) Ambient Temperature TA (C) SWITCHING TIME vs. LOAD RESISTANCE LONG TERM CTR DEGRADATION 1 000 1.2 VCC = 10 V, IC = 10 mA, CTR = 2 300% IF = 1 mA TA = 25C 1.0 100 tr tf td 10 ts 1 CTR (Relative Value) Switching Time t ( s) 1 0.8 60C 0.6 0.4 0.2 0.1 10 50 100 500 1 000 0.0 10 Load Resistance RL () 102 103 104 105 106 Time (Hr) Remark The graphs indicate nominal characteristics. Data Sheet PN10257EJ03V0DS 7 PS2832-1,-4,PS2833-1,-4 TAPING SPECIFICATIONS (UNIT: mm) 1.5+0.1 -0 7.50.1 4.00.1 16.00.3 2.00.1 7.550.1 1.750.1 Outline and Dimensions (Tape) 2.8 MAX. 0.3 1.550.1 2.30.1 2.850.1 4.00.1 Tape Direction 831 831 32 32 831 32 32 831 831 831 831 831 32 32 32 32 32 32 831 PS2832-1-F4 PS2833-1-F4 831 PS2832-1-F3 PS2833-1-F3 Outline and Dimensions (Reel) R 1.0 21.00.8 1001.0 2.00.5 13.00.2 3302.0 2.00.5 17.51.0 21.51.0 Packing: 3 500 pcs/reel 8 Data Sheet PN10257EJ03V0DS 15.9 to 19.4 Outer edge of flange PS2832-1,-4,PS2833-1,-4 2.8 MAX. 10.70.1 7.50.1 1.5+0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 0.3 2.30.1 8.30.1 1.550.1 12.00.1 Tape Direction PS2832-4-F3 PS2833-4-F3 PS2832-4-F4 PS2833-4-F4 Outline and Dimensions (Reel) R 1.0 21.00.8 1001.0 2.00.5 13.00.2 3302.0 2.00.5 17.51.0 21.51.0 Packing: 2 500 pcs/reel Data Sheet PN10257EJ03V0DS 15.9 to 19.4 Outer edge of flange 9 PS2832-1,-4,PS2833-1,-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220C 60 seconds or less * Time to preheat temperature from 120 to 180C 12030 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature 260C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120C or below (package surface temperature) * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron * Peak temperature (lead part temperature) 350C or below * Time (each pins) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100C. 10 Data Sheet PN10257EJ03V0DS PS2832-1,-4,PS2833-1,-4 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10257EJ03V0DS 11 PS2832-1,-4,PS2833-1,-4 <R> SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Climatic test class (IEC 60068-1/DIN EN 60068-1) Spec. Unit 55/100/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) UIORM 705 Vpeak Upr 1 058 Vpeak Upr 1 322 Vpeak UTR 6 000 Vpeak Upr = 1.5 x UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 x UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) 2 Clearance distance >5.0 mm Creepage distance >5.0 mm Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) CTI Material group (DIN EN 60664-1 VDE0110 Part 1) 175 III a Storage temperature range Tstg -55 to +150 C Operating temperature range TA -55 to +100 C Isolation resistance, minimum value VIO = 500 V dc at TA = 25C Ris MIN. 10 12 VIO = 500 V dc at TA MAX. at least 100C Ris MIN. 10 11 Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Tsi 150 C Current (input current IF, Psi = 0) Isi 300 mA Power (output or total power dissipation) Psi 500 mW Ris MIN. 10 Isolation resistance VIO = 500 V dc at TA = Tsi 12 Data Sheet PN10257EJ03V0DS 9 PS2832-1,-4,PS2833-1,-4 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. NOTICE 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. California Eastern Laboratories and Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. California Eastern Laboratories has used reasonable care in preparing the information included in this document, but California Eastern Laboratories does not warrant that such information is error free. California Eastern Laboratories and Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 3. California Eastern Laboratories and Renesas Electronics do not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of California Eastern Laboratories or Renesas Electronics or others. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. California Eastern Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product. 5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. California Eastern Laboratories and Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by California Eastern Laboratories or Renesas Electronics. 6. You should use the Renesas Electronics products described in this document within the range specified by California Eastern Laboratories, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. California Eastern Laboratories shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. Please contact a California Eastern Laboratories sales office for details as to environmental matters such as the environmental compatibility of each Renesas 8. Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. California Eastern Laboratories and Renesas Electronics assume no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. It is the responsibility of the buyer or distributor of California Eastern Laboratories, who distributes, disposes of, or otherwise places the Renesas Electronics product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, California Eastern Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products. 11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of California Eastern Laboratories. 12. Please contact a California Eastern Laboratories sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. NOTE 1: "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. NOTE 2: "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. NOTE 3: Products and product information are subject to change without notice. CEL Headquarters * 4590 Patrick Henry Drive, Santa Clara, CA 95054 * Phone (408) 919-2500 * www.cel.com For a complete list of sales offices, representatives and distributors, Please visit our website: www.cel.com/contactus