KFV KGV Einbaukupplung nach IEC 61076-2-106, IP 40, mit Schraubverschluss und Lotanschlussen KFV: fur Frontmontage KGV: fur Ruckseitenmontage 1. Temperaturbereich -40 C/+85 C 2. Werkstoffe KFV KGV Kontakttrager Kontaktbuchse 3- bis 8-polig Kontaktbuchse 12-polig Gehause Ringmutter PA GF CuZn, versilbert und flashvergoldet CuZn, unternickelt und vergoldet Zn-Druckguss, vernickelt CuZn, vernickelt 3. Mechanische Daten Steckkraft/Kontakt 3- bis 8-polig1 Steckkraft/Kontakt 12-polig2 Ziehkraft/Kontakt 3- bis 8-polig1 Ziehkraft/Kontakt 12-polig2 Kontaktierung mit Schutzart3 Weiteres siehe Tabelle < 5,0 N < 5,0 N > 1,2 N > 0,9 N Steckern 033098, 033099, SV, WSV Steckern nach IEC 61076-2-106 und IEC 60130-9 Kupplungen nach IEC 61076-2-106 und IEC 60130-9 IP 40 4. Elektrische Daten 5 m Durchgangswiderstand Weiteres siehe Tabelle 1 2 3 4 gemessen mit einem polierten Stahlstift, Nennma 1,5 mm gemessen mit einem polierten Stahlstift, Nennma 1,0 mm nach DIN EN 60529, nur in verschraubtem Zustand mit einem dazugehorigen Gegenstuck nach VDE 0110/IEC 60664 *a Mutter lose beigestellt nut enclosed separately ecrou ajoute separement *b Lotkelch bell-shaped solder terminal plot a souder en forme de coupe *c Montagerichtung mounting direction direction de montage *d Einbauoffnung port ouverture d'emplacement Polbilder, von der Lotseite gesehen Pin configurations, solder side view Schemas de raccordement, vus du cote a souder KFV 30 KGV 30 KFV 40 KGV 40 www.lumberg.com KFV 50 KGV 50 KFV 50/6 KGV 50/6 KFV 60 KGV 60 KFV 70 KGV 70 KFV 71 KGV 71 KFV 80 KGV 80 KFV 81 KGV 81 KFV 120 KGV 120 11/2012 Rundsteckverbinder mit Schraubverschluss nach IEC 61076-2-106, IP 40 Circular connectors with threaded joint acc. to IEC 61076-2-106, IP 40 Connecteurs circulaires avec verrouillage a vis suivant CEI 61076-2-106, IP 40 KFV 03 KGV KFV 03 KGV Chassis socket acc. to IEC 61076-2-106, IP 40, with threaded joint and solder terminals KFV: for front mounting KGV: for rear mounting Embase femelle suivant CEI 61076-2-106, IP 40, avec verrouillage a vis et connexion par soudure KFV: pour montage de front KGV: pour montage par derriere 1. Temperature range 1. Temperature d'utilisation -40 C/+85 C 2. Materials -40 C/+85 C 2. Materiaux Insulating body Contact bush 3 to 8 poles Contact bush 12 poles Housing Ring nut PA GF CuZn, silvered and flash gilded CuZn, pre-nickeled and gilded Zn diecast, nickeled CuZn, nickeled 3. Mechanical data Corps isolant Prise de contact 3 a 8 poles Prise de contact 12 poles Boitier Ecrou a anneau PA GF CuZn, argente et dore flash CuZn, sous-nickele et dore Zn moule sous pression, nickele CuZn, nickele 3. Caracteristiques mecaniques Insertion force/contact 3-8 poles1 Insertion force/contact 12 poles2 Withdrawal force/contact 3-8 poles1 Withdrawal force/contact 12 poles2 Mating with Protection3 For further information see table Force d'insertion/contact 3-8 poles1 < 5,0 N < 5,0 N Force d'insertion/contact poles2 Force de separation/contact 3-8 poles1 > 1,2 N Force de separation/contact 12 poles2 > 0,9 N Raccordement avec connecteurs males 033098, 033099, SV, WSV connecteurs males suivant CEI 61076-2-106 et CEI 60130-9 3 IP 40 Protection Pour plus de details, voir tableau < 5.0 N < 5.0 N > 1.2 N > 0.9 N plugs 033098, 033099, SV, WSV plugs according to IEC 61076-2-106 and IEC 60130-9 IP 40 4. Electrical data Contact resistance For further information see table 1 2 3 4 5 m 4. Caracteristiques electriques Resistance de contact Pour plus de details, voir tableau measured with a polished steel pin, nominal thickness 1.5 mm measured with a polished steel pin, nominal thickness 1.0 mm according to DIN EN 60529, only in locked position with a proper counterpart according to VDE 0110/IEC 60664 1 2 3 Polz ah Pole l s Pole s Bestellbezeichnung Designation Designation mesuree avec une tige d'acier poli, epaisseur nominale 1,5 mm mesuree avec une tige d'acier poli, epaisseur nominale 1,0 mm suivant DIN EN 60529, uniquement a l'etat verrouille avec un propre pendant suivant VDE 0110/CEI 60664 Ver pac ku Pac kag ngsein hei eu Uni te d nit (PU t (VE) 'em ) ball age (UE Ans ) ch Wir lussque es rs Sec ection chnitt tion de racc . de fil Bem essu ngs Rat s ed tro Cou curren m t ran t as sign e Bem essu ngs Rat spa ed Ten voltag 2 nnung 2 sion e assi gne 2 e Pru fspa nnu Test ng vo Ten ltage sion d'es sai Isol ati Insu onswid er lat Res ion re stand ista s nce istanc e d'is olem Kon ent tak t Con k tact apazit Cap at a capa con cite de citanc tact e 4 5 m mm A V AC kV AC eff. G pF KFV 30 KGV 30 3 50 0,75 5 250 2 > 10 ~2 KFV 40 KGV 40 4 50 0,75 5 250 2 > 10 ~2 KFV 50 KGV 50 5 50 0,75 5 60 1 > 10 ~3 KFV 50/6 KGV 50/6 5 50 0,75 5 250 2 > 10 ~2 KFV 60 KGV 60 6 50 0,75 5 250 2 > 10 ~2 KFV 70 KGV 70 7 50 0,75 5 250 2 > 10 ~2 KFV 71 KGV 71 7 50 0,75 5 60 1 > 10 ~3 KFV 80 KGV 80 8 50 0,75 5 60 1 > 10 ~3 KFV 81 KGV 81 8 50 0,75 5 60 1 > 10 ~3 KFV 120 KGV 120 12 50 0,25 3 60 1 > 10 ~3 Verpackung: im Karton Packaging: in a cardboard box Emballage: dans un carton www.lumberg.com 11/2012