PARE 82 LABFACILITY LTD SS LLATION FITTINGS Boec33323 Vea Vet y= FLANGE PLATES Labfacility flange plates enable the mounting of temperature probes with compression fittings. Available in stainless stee| and brass, flange plates are particularly recommended for mounting probes in process ovens, kilns, heating and ventilating ducts, etc Diameter 50mm Female thread 1/8 BSPP Mounting holes 3 x 4mm dia. on 40mm PCD ORDER CODES STAINLESS STEEL CA-250 BRASS CA-251 1 Labfacility offers a range of bayonet fittings and associated adaptors for securing temperature sensors, When fitted, a bayonet fitting spring loads the sensor to keep it in permanent contact with the measured surface. Bayonet fittings are Particularly suitable for mounting sensors in plastics extruders, injection moulding machines, ete. Two types of bayonet fixing are available (compression or grub screw). Select the fitting to suit sensor diameter. Adaptors are available in two thread sizes and various lengths. LAS FIRS tedaeautamte 8 ea , Bi 7 EOC BUR SE 3a Re eae Meets SZ ORDER CODES - BAYONET FITTINGS TYPE FITTING PROBEDIA, ORDER (mm) CODE Single slot cap Compression 30 CA-300 Single slot cap = Compression 45 CA-301 Single slot cap Grub screw 3.0 CA-302 |_Single slot cap Grub screw 45 CA-303 | _ Twinslot cap Grub screw 6.0 CA-304 ORDER CODES - ADAPTORS THREAD OVERALL PINS ORDER SIZE LENGTH (mm) CODE 1/8" BSP 22 Single CA-400 1/8" BSP 35 Single CA-401 1/8" BSP 48 Single CA-A02 | 1/8" BSP 64 Single CA-403 I 1/8 BSP 22 Double CA-404 [ M10x 1mm 35 Single A405 | Specrfications may be subject to change LABFACILITY LIMITED Boe Tel: 0181 943 5331 Fax: 0181 943 4351 HEAD OFFICE: LABFACILITY LTD, 99 Waldegrave Road, Taddington, Middlesex TW11 BER, UK. Tel 0187 943 331 Telox, 8952151 Intemp G Fax: 0781 943 4354 NORTHERN OFFICE, LABFACILITY LTD, Unit 7 Abbey Way, North Anston Tracing Estate, Dinningten, Shetfield $31 7Ld, UK. Tel 01909 569446 Fax 01909 550632