K3P7V(U)1000B-YC CMOS MASK ROM 64M-Bit (8Mx8 /4Mx16) CMOS MASK ROM FEATURES GENERAL DESCRIPTION * Switchable organization 8,388,608 x 8(byte mode) 4,194,304 x 16(word mode) * Fast access time Random Access Time/Page Access Time 3.3V Operation : 100/30ns(Max.)@CL=50pF, 120/40ns(Max.)@C L=100pF 3.0V Operation : 120/40ns(Max.)@CL=100pF 8 Words / 16 Bytes page access * Supply voltage : single +3.0V/ single +3.3V * Current consumption Operating : 60mA(Max.) Standby : 50A(Max.) * Fully static operation * All inputs and outputs TTL compatible * Three state outputs * Package K3P7V(U)1000B-YC : 48-TSOP1-1218 The K3P7V(U)1000B-YC is a fully static mask programmable ROM fabricated using silicon gate CMOS process technology, and is organized either as 8,388,608 x 8 bit(byte mode) or as 4,194,304 x 16 bit(word mode) depending on BHE voltage level.(See mode selection table) This device includes page read mode function, page read mode allows 8 words (or 16 bytes) of data to read fast in the same page, CE and A3 ~ A21 should not be changed. This device operates with 3.0V or 3.3V power supply, and all inputs and outputs are TTL compatible. Because of its asynchronous operation, it requires no external clock assuring extremely easy operation. It is suitable for use in program memory of microprocessor, and data memory, character generator. The K3P7V(U)1000B-YC is packaged in a 48-TSOP1. FUNCTIONAL BLOCK DIAGRAM Pin Name A21 X . . . . . . . . A0 - A2 Page Address Inputs BUFFERS MATRIX A3 - A21 Address Inputs AND (4,194,304x16/ Q0 - Q14 Data Outputs DECODER 8,388,608x8) Q15 /A-1 Output 15(Word mode)/ LSB Address(Byte mode) Y MEMORY CELL BHE SENSE AMP. BUFFERS AND A3 DECODER A0~A2 A-1 DATA OUT BUFFERS . . . CE OE BHE Pin Function CONTROL LOGIC Q0/Q 8 Q7/Q15 Word/Byte selection CE Chip Enable OE Output Enable VCC Power Vss Ground N.C No Connection K3P7V(U)1000B-YC CMOS MASK ROM PIN CONFIGURATION BHE A16 A15 A14 A13 A12 A11 A10 A9 A8 A19 A21 A20 A18 A17 A7 A6 A5 A4 A3 A2 A1 A0 CE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 TSOP1 VSS VSS Q15/A-1 Q7 Q14 Q6 Q13 Q5 Q12 Q4 VCC VCC N.C Q11 Q3 Q10 Q2 Q9 Q1 Q8 Q0 OE VSS VSS K3P7V(U)1000B-YC ABSOLUTE MAXIMUM RATINGS Item Voltage on Any Pin Relative to VSS Symbol Rating Unit VIN -0.3 to +4.5 V Temperature Under Bias TBIAS -10 to +85 C Storage Temperature TSTG -55 to +150 C NOTE : Permanent device damage may occur if "ABSOLUTE MAXIMUM RATINGS" are exceeded. Functional operation should be restricted to the conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. RECOMMENDED OPERATING CONDITIONS(Voltage reference to VSS, TA=0 to 70C) Symbol Min Typ Max Unit Supply Voltage Item VCC 2.7/3.0 3.0/3.3 3.3/3.6 V Supply Voltage VSS 0 0 0 V DC CHARACTERISTICS Parameter Symbol Test Conditions Operating Current ICC Cycle=5MHZ, all outputs open, CE=OE=VIL, VIN=0.45V to 2.4V (AC Test Condition) Standby Current(TTL) ISB1 CE=VIH, all outputs open Standby Current(CMOS) ISB2 CE=VCC, all outputs open Input Leakage Current ILI VIN=0 to VCC VOUT=0 to VCC VCC=3.3V0.3V Min Max Unit - 60 mA VCC=3.0V0.3V - 50 mA 500 A 50 A 10 A Output Leakage Current ILO - 10 A Input High Voltage, All Inputs VIH 2.0 VCC+0.3 V Input Low Voltage, All Inputs VIL -0.3 0.6 V Output High Voltage Level VOH IOH=-400A 2.4 - V Output Low Voltage Level VOL IOL=2.1mA - 0.4 V NOTE : Minimum DC Voltage(VIL) is -0.3V an input pins. During transitions, this level may undershoot to -2.0V for periods <20ns. Maximum DC voltage on input pins(VIH ) is VCC+0.3V which, during transitions, may overshoot to VCC+2.0V for periods <20ns. K3P7V(U)1000B-YC CMOS MASK ROM MODE SELECTION CE OE BHE Q15/A-1 Mode Data Power H X X X Standby High-Z Standby L H L L X X Operating High-Z Active H Output Operating Q0~Q15 : Dout Active L Input Operating Q0~Q7 : Dout Q8~Q14 : Hi-Z Active CAPACITANCE(TA=25C, f=1.0MHz) Item Output Capacitance Input Capacitance Symbol Test Conditions Min Max Unit COUT VOUT=0V - 12 pF CIN VIN=0V - 12 pF NOTE : Capacitance is periodically sampled and not 100% tested. AC CHARACTERISTICS (TA=0C to +70C,VCC=3.3V/3.0V0.3V, unless otherwise noted.) TEST CONDITIONS Item Value Input Pulse Levels 0.45V to 2.4V Input Rise and Fall Times 10ns Input and Output timing Levels 1.5V Output Loads 1 TTL Gate and CL=50pF or 100pF READ CYCLE Item Symbol K3P7V1000B-YC10 (CL=50pF) Min Max Min Max Min Unit Max tRC Chip Enable Access Time tACE 100 120 120 ns Address Access Time tAA 100 120 120 ns Page Address Access Time tPA 30 40 40 ns Output Enable Access Time tOE 30 40 40 ns Output or Chip Disable to Output High-Z tDF 20 20 20 ns Output Hold from Address Change tOH 0 120 K3P7U1000B-YC12 (CL=100pF) Read Cycle Time NOTE : Page Address is determined as below. Word mode (BHE=VIH ) : A0 , A1, A2 Byte mode (BHE=VIL) : A-1, A0, A1, A2 100 K3P7V1000B-YC12 (CL=100pF) 0 120 0 ns ns K3P7V(U)1000B-YC CMOS MASK ROM TIMING DIAGRAM READ ADD A0~A21 A-1(*1) ADD1 ADD2 tRC tDF(*3) tACE CE tOE tAA OE tOH DOUT D0~D7 D8~D15(*2) VALID DATA VALID DATA PAGE READ CE tDF(*3) OE ADD A3~A21 ADD A0,A1,A2 A -1(*1) 1 st tAA tPA VALID DATA VALID DATA VALID DATA VALID DATA DOUT D0~D7 D8~D15(*2) 3 rd 2 nd NOTES : *1.Byte Mode only. A-1 is Least Significant Bit Address.(BHE = VIL) *2. Word Mode only.(BHE = VIH) *3. tDF is defined as the time at which the outputs achieve the open circuit condition and is not referenced to VOH or VOL level.