S/MOD/SKD10306/A/29/11/1999 page 1 / 2 F/GB SKD10306 RELAIS STATIQUE DC POUR CIRCUIT IMPRIME DC SOLID STATE RELAY FOR PRINTED CIRCUIT BOARD 3-30 VDC input 3 A / 60 VDC output * Gamme pour circuit imprime. * Sortie DC . * Range for printed circuit board * DC Output. Aplication typique/Typical application Caracteristiques d'entree (a 20C) / Input characteristics (20C) Parametre / Parameter Plage de tension de commande (Uc) / Input voltage range (Uc) Symbol Unit Uc 3-30 VDC Tension maximum de commande / Maximum control voltage Uc max 30 VDC Tension minimum de commande / Minimum control voltage Uc min 3 VDC Ic 1 mADC Courant maximum de commande / Maximum control current Ic max 30 mADC Tension de relachement/Release voltage Uc off 1 VDC Rc 1000 Courant de fonctionnement/Operating current Resistance interne / Input internal resistor Caracteristiques generales / General characteristics Unit Parametre / Parameter C - 40 a/to +105 Temperature de stockage / Storage temperature -40 a/to +80 C 2500 VRMS Capacite entree-sortie/ Input-output capacity 8 pF Poids/Weight 20 g Temperature de fonctionnement /Operating temperature Tension d'isolement entree-sortie / Input-output isolation voltage Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. (R) celduc r e l a i s S/MOD/SKD10306/A/29/11/1999 page 2 / 2 F/GB Caracteristiques de sortie (a 20) / Output characteristics(20C) Unit Parametre / Parameter Tension nominale / Nominal voltage Plage tension de fonctionnement / Operating range Tension crete / Peak voltage Courant nominal (voir les caracteristiques thermiques) / Nominal current (see thermal curves) - VDC 2 a/to 60 60 VDC VPEAK 3 A Courant de surcharge accidentel admissible maximum / Maximum accidental overload current Chute tension directe (In) / On state voltage drop (IN) 10 APEAK 1,6 VDC 1 mA Courant de fuite etat bloque / Off state leakage current Courant de charge minimum / Minimum load current 5 mA Temps de fermeture / Turn on time 200 s Temps d'ouverture / Turn off time 800 s Frequence d'utilisation / Operating frequency dv/dt etat bloque / Off state dv/dt 0 a/to 500 Hz 200 V/s Fig.2 Caracteristiques thermiques / thermal curves : Precautions : * Les relais a semiconducteurs ne procurent pas d'isolation galvanique entre le reseau et la charge. Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains. * Dans le cas de plusieurs modules cote a cote, prevoir un derating en courant. * In case of many SSRs side by side, take a derating current in to account. * Sur charges inductives prevoir une diode de roue libre (ou ecreteur de surtension ). * On inductive loads put a free-wheeling diode (or clamp ). (R) celduc www.celduc.com r e l a i s 5, Rue Ampere BP30004 42290 SORBIERS - FRANCE E-mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19