AOZ8831A Ultra Low Capacitance One-line Bidirectional TVS Diode General Description Features The AOZ8831A is an ultra low capacitance one-line bidirectional transient voltage suppressor diode designed to protect high speed data lines and voltage sensitive electronics from high transient conditions and ESD. ESD protection for high-speed data lines: This device incorporates one bidirectional TVS diode in an ultra-small DFN 1.0x0.6 footprint package. It may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (15kV air, 15kV contact discharge). Ultra low capacitance: 0.30pF - Exceeds: IEC 61000-4-2 (ESD), 25kV (contact) - Human Body Model (HBM) 25kV Small package saves board space Low clamping voltage Low operating voltage: 5.0V Pb-free device The AOZ8831A comes in an RoHS compliant package and is rated over a -40C to +85C ambient temperature range. The ultra-small 1.0 x 0.6 x 0.5mm DFN package makes it ideal for applications where PCB space is a premium. The small size and high ESD protection makes it ideal for protecting voltage sensitive electronics from high transient conditions and ESD. Applications Portable handheld devices Keypads, data lines, buttons Notebook computers Digital Cameras Portable GPS MP3 players Typical Application Pin Configuration Signal Line 1 2 Bidirection Protection of Single Line Rev. 6.0 June 2015 www.aosmd.com Page 1 of 7 AOZ8831A Ordering Information Part Number Ambient Temperature Range Package Environmental AOZ8831ADI-05 -40C to +85C DFN 1.0 x 0.6 Green Product RoHS Compliant AOS Green Products use reduced levels of Halogens, and are also RoHS compliant. Please visit www.aosmd.com/media/AOSGreenPolicy.pdf for additional information. Absolute Maximum Ratings Exceeding the Absolute Maximum Ratings may damage the device. Parameter Rating VP - VN 5V Peak Pulse Current (IPP), tP = 8/20s 2.5A Peak Pulse Power, tP = 8/20s 40W Storage Temperature (TS) -65C to +150C ESD Rating per IEC61000-4-2, ESD Rating per Human Body Contact(1) 25kV Model(2) 25kV Notes: 1. IEC 61000-4-2 discharge with CDischarge = 150pF, RDischarge = 330. 2. Human Body Discharge per MIL-STD-883, Method 3015 CDischarge = 100pF, RDischarge = 1.5k. Maximum Operating Conditions The device is not guaranteed to operate beyond the Maximum Operating Conditions. Parameter Rating Junction Temperature (TJ) Rev. 6.0 June 2015 -40C to +125C www.aosmd.com Page 2 of 7 AOZ8831A Electrical Characteristics TA = 25C unless otherwise specified. Symbol IPP Parameter Diagram Maximum Reverse Peak Pulse Current (100ns Transmission Line Pulse (TLP)) VCL Clamping Voltage @ IPP VSURGE_MAX Peak Voltage at ISURGE = 2A (IEC61000-40-5 8/20s pulse current) VRWM Working Peak Reverse Voltage IR Maximum Reverse Leakage Current VBR Breakdown Voltage PPK Peak Power Dissipation CJ Capacitance @ VR = 0 and f = 1MHz Device AOZ8831ADI-05 Rev. 6.0 June 2015 I IPP VCL VBR VRWM IR IT VRWM VBR VCL V IPP VBR (V) VCL Max. CJ (pF) IR (nA) VSURGE (V) Device VRWM (V) IPP = 1A IPP = 2A IPP = 5A Typ. Max. Max. Max. Marking Min. Max. Max. T 5.0 6.0 10.0 50.0 15.5 www.aosmd.com 14.0 16.0 19.5 0.30 0.45 Page 3 of 7 AOZ8831A Typical Performance Characteristics Clamping Voltage vs. Peak Pulse Current 5 0 25 Insertion Loss (dB) Clamping Voltage, VCL (V) Insertion Loss (S21) vs. Frequency (tperiod = 100ns, tr = 1ns) 30 20 15 -5 -10 -15 -20 -25 10 0 2 4 6 8 10 1 12 10 100 1000 10000 Frequency (MHz) Peak Pulse Current, IPP (A) Typical Variation of CIN vs. VR (f = 1MHz, T = 25C) 0.8 Input Capacitance (pF) 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 1 2 3 4 5 Input Voltage (V) Rev. 6.0 June 2015 www.aosmd.com Page 4 of 7 AOZ8831A Package Dimensions, DFN 1.0 x 0.6 5 Index Area (E/4xD) 2x aaa C 3 e A aaa C 2x D ddd C AB B E Pin#1 ID 0.125x45 2x b L2 ddd C AB BOTTOM VIEW TOP VIEW 6 A Seating Plane 2x 7 ccc C A1 C SIDE VIEW RECOMMENDED LAND PATTERN 1.00 0.30 0.55 0.40 0.125 x 45 Dimensions in millimeters Symbols A A1 b D E e L aaa ccc ddd Min. 0.47 0.00 0.45 Nom. 0.51 0.02 0.50 0.60 BSC 1.00 BSC 0.65 BSC 0.20 0.25 0.05 0.03 0.10 Max. 0.55 0.05 0.55 0.30 Dimensions in inches Symbols A A1 b D E e L aaa ccc ddd Min. 0.019 0.000 0.018 0.008 Nom. 0.020 0.001 0.020 0.024 0.039 0.026 0.010 0.002 0.001 0.004 Max. 0.022 0.002 0.022 0.012 0.30 UNIT: mm Notes: 1. Dimensions and tolerancing conform to ASME Y14.5-2009. 2. All dimensions are in milliteters. 3. "e" represents the terminal grid pitch. 4. N isthe total number of terminals. 5. A visual index feature must be located within the hatched area. Typical index feature (chamfer) must be located on the edge of the Pin#1 feature. 6. This dimension includes stand-off height "A1" and packaged body thickness, but does not include attached feature e.g. external heatsink or chip capacitors, an internal heatslug is not considered as attached feature. 7. Dimension "A1" is primarily terminal plating, and does not include small metal protrusions. Rev. 6.0 June 2015 www.aosmd.com Page 5 of 7 AOZ8831A Tape and Reel Dimensions, DFN 1.0 x 0.6 Carrier Tape P1 P2 T D1 E1 E2 E B0 K0 P0 D0 A0 UNIT: mm Option A Package B0 A0 K0 DFN 1.0x0.6/ 0.69 1.19 0.66 DFN 1.0x0.6A 0.05 0.05 0.05 (8 mm) D0 0.40 0.05 D1 E E1 1.50 8.00 1.75 0.10 +0.3/-0.1 0.10 E2 3.50 0.05 P0 2.00 0.05 P1 4.00 0.10 T P2 0.23 2.00 0.05 0.02 B 0.61 DFN 1.0x0.6/ 0.65 1.05 DFN 1.0x0.6A 0.04 0.04 0.04 (8 mm) 0.40 0.05 1.50 8.00 1.75 0.10 +0.3/-0.1 0.10 3.50 0.05 2.00 0.10 4.00 0.10 2.00 0.20 0.05 0.05 Reel W1 S G N M K V R H W UNIT: mm Tape Size Reel Size 8mm o178 M o178 0.5 N o55 1 W 8.4 +1.5/-0 W1 Max. 14.4 H o13.0 0.5 K Max. 10.1 S 2.0 0.5 G N/A R N/A V N/A Leader / Trailer & Orientation TVS Unit Per Reel: 10000pcs Trailer Tape 300mm Min. Rev. 6.0 June 2015 Components Tape Orientation in Pocket www.aosmd.com Leader Tape 500mm Min. Page 6 of 7 AOZ8831A Part Marking T X Product Number Code Date Code LEGAL DISCLAIMER Alpha and Omega Semiconductor makes no representations or warranties with respect to the accuracy or completeness of the information provided herein and takes no liabilities for the consequences of use of such information or any product described herein. Alpha and Omega Semiconductor reserves the right to make changes to such information at any time without further notice. This document does not constitute the grant of any intellectual property rights or representation of non-infringement of any third party's intellectual property rights. LIFE SUPPORT POLICY ALPHA AND OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. Rev. 6.0 June 2015 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.aosmd.com Page 7 of 7