To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
NOT RECOMMNEDED FOR NEW DESIGN
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL2730, HCPL2731 — Low Input Current High Gain Split Darlington Optocouplers
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N138, 5N139, NCPL2730, HCPL2731 Rev. 1.0.5
August 2008
Single-Channel: 6N138, 6N139
Dual-Channel: HCPL2730, HCPL2731
Low Input Current High Gain Split
Darlington Optocouplers
Features
■
Low current – 0.5mA
■
Superior CTR-2000%
■
Superior CMR-10kV/µs
■
CTR guaranteed 0–70°C
■
U.L. recognized (File # E90700)
■
VDE recognized (File # 120915) Ordering option V,
e.g., 6N138V
■
Dual Channel – HCPL2730, HCPL2731
Applications
■
Digital logic ground isolation
■
Telephone ring detector
■
EIA-RS-232C line receiver
■
High common mode noise line receiver
■
µP bus isolation
■
Current loop receiver
Description
The 6N138/9 and HCPL2730/HCPL2731 optocouplers
consist of an AlGaAs LED optically coupled to a high
gain split darlington photodetector.
The split darlington configuration separating the input
photodiode and the first stage gain from the output
transistor permits lower output saturation voltage and
higher speed operation than possible with conventional
darlington phototransistor optocoupler. In the dual
channel devices, HCPL2730/HCPL2731, an integrated
emitter-base resistor provides superior stability over
temperature.
The combination of a very low input current of 0.5mA
and a high current transfer ratio of 2000% makes this
family particularly useful for input interface to MOS,
CMOS, LSTTL and EIA RS232C, while output compati-
bility is ensured to CMOS as well as high fan-out TTL
requirements. An internal noise shield provides excep-
tional common mode rejection of 10 kV/µs.
Schematic Package Outlines
8
1
8
1
8
1
1
2
3
4 5
6
7
8
+
_
VF
VCC
VB
VO
GND
6N138 / 6N139
N/C
N/C
1
2
3
4 5
6
7
8
+
_
VF1
VCC
V01
V02
GND
HCPL2730 / HCPL2731
VF2
_
+
NOT RECOMMNEDED FOR NEW DESIGN
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N138, 5N139, NCPL2730, HCPL2731 Rev. 1.0.5 2
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL2730, HCPL2731 — Low Input Current High Gain Split Darlington Optocouplers
Absolute Maximum Ratings
(T
A
= 25°C unless otherwise specified)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol Parameter Value Units
T
STG
Storage Temperature -55 to +125 °C
T
OPR
Operating Temperature -40 to +85 °C
T
SOL
Lead Solder Temperature (Wave solder only. See recommended reflow profile
graph for SMD mounting)
260 for 10 sec °C
EMITTER
I
F
(avg) DC/Average Forward Input Current Each Channel 20 mA
I
F
(pk) Peak Forward Input Current (50% duty cycle, 1 ms P.W.) Each Channel 40 mA
I
F
(trans) Peak Transient Input Current - (
≤
1µs P.W., 300 pps) 1.0 A
V
R
Reverse Input Voltage Each Channel 5 V
P
D
Input Power Dissipation Each Channel 35 mW
DETECTOR
I
O
(avg) Average Output Current Each Channel 60 mA
V
ER
Emitter-Base Reverse Voltage 6N138 and 6N139 0.5 V
V
CC
, V
O
Supply Voltage, Output Voltage 6N138, HCPL2730 -0.5 to 7 V
6N139, HCPL2731 -0.5 to 18
P
O
Output Power Dissipation Each Channel 100 mW
NOT RECOMMNEDED FOR NEW DESIGN
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N138, 5N139, NCPL2730, HCPL2731 Rev. 1.0.5 3
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL2730, HCPL2731 — Low Input Current High Gain Split Darlington Optocouplers
Electrical Characteristics
(T
A
= 0 to 70°C unless otherwise specified)
Individual Component Characteristics
Transfer Characteristics
*All Typicals at T
A
= 25°C
Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit
EMITTER
V
F
Input Forward Voltage T
A
= 25°C All 1.30 1.7 V
Each channel (I
F
= 1.6mA) 1.75
BV
R
Input Reverse
Breakdown Voltage
T
A
= 25°C, I
R
= 10µA All 5.0 20 V
∆
V
F
/
∆
T
A
Temperature
Coefficient of
Forward Voltage
I
F
= 1.6mA All -1.8 mV/°C
DETECTOR
I
OH
Logic HIGH Output
Current
I
F
= 0mA, V
O
= V
CC
= 18V 6N139 0.01 100 µA
Each Channel HCPL2731
I
F
= 0mA, V
O
= V
CC
= 7V 6N138 0.01 250
Each Channel HCPL2730
I
CCL
Logic LOW supply I
F
= 1.6mA, V
O
= Open, V
CC
= 18V 6N138,
6N139
0.4 1.5 mA
I
F1
= I
F2
= 1.6mA, V
CC
= 18V HCPL2731 1.3 3
V
O1
– V
O2
= Open, V
CC
= 7V HCPL2730
I
CCH
Logic HIGH Supply I
F
= 0mA, V
O
= Open, V
CC
= 18V 6N138,
6N139
0.05 10 µA
I
F1
= I
F2
= 0mA, V
CC
= 18V HCPL2731 0.10 20
V
O1
– V
O2
= Open, V
CC
= 7V HCPL2730
Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit
COUPLED
CTR Current Transfer
Ratio
(1)(2)
I
F
= 0.5mA, V
O
= 0.4 V, V
CC
= 4.5V 6N139 400 1100 %
Each Channel HCPL2731 3500
I
F
= 1.6mA, V
O
= 0.4 V, V
CC
= 4.5V 6N139 500 1300
Each Channel HCPL2731 2500
I
F
= 1.6mA, V
O
= 0.4 V, V
CC
= 4.5V 6N138 300 1300
Each Channel HCPL2730 2500
V
OL
Logic LOW Output
Voltage
(2)
I
F
= 0.5mA, I
O
= 2mA, V
CC
= 4.5V 6N139 0.08 0.4 V
I
F
= 1.6mA, I
O
= 8mA, V
CC
= 4.5V 6N139 0.01 0.4
Each Channel HCPL2731
I
F
= 0.5mA, I
O
= 15mA, V
CC
= 4.5V 6N139 0.13 0.4
Each Channel HCPL2731
I
F
= 12mA, I
O
= 24mA, V
CC
= 4.5V 6N139 0.20 0.4
Each Channel HCPL2731
I
F
= 1.6mA, I
O
= 4.8mA, V
CC
= 4.5V 6N138 0.10 0.4
Each Channel HCPL2730
NOT RECOMMNEDED FOR NEW DESIGN
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N138, 5N139, NCPL2730, HCPL2731 Rev. 1.0.5 4
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL2730, HCPL2731 — Low Input Current High Gain Split Darlington Optocouplers
Electrical Characteristics
(Continued) (T
A
= 0 to 70°C unless otherwise specified)
Switching Characteristics
(V
CC
= 5V)
** All Typicals at T
A
= 25°C
Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit
T
PHL
Propagation Delay
Time to Logic
LOW
(2)
(Fig. 24)
R
L
= 4.7
Ω
, I
F
= 0.5mA 6N139 30 µs
T
A
= 25°C 4 25
R
L
= 4.7
Ω
, I
F
= 0.5mA HCPL2731 120
Each Channel T
A
= 25°C 3 100
R
L
= 270
Ω, IF = 12mA 6N139 2
TA = 25°C 0.2 1
RL = 270Ω, IF = 12mA, Each Channel HCPL2730 3
TA = 25°C HCPL2731 0.3 2
RL = 2.2Ω, IF = 1.6mA 6N138 15
TA = 25°C 1.5 10
RL = 2.2Ω, IF = 1.6mA, Each Channel HCPL2731
HCPL2730
25
TA = 25°C 1 20
TPLH Propagation Delay
Time to Logic
HIGH(2) (Fig. 24)
RL = 4.7Ω, IF = 0.5mA 6N139 90 µs
Each Channel HCPL2731
RL = 4.7Ω, IF = 0.5mA, TA = 25°C 6N139 12 60
Each Channel HCPL2731 22
RL = 270Ω, IF = 12mA 6N139 10
TA = 25°C 1.3 7
RL = 270Ω, IF = 12mA, Each Channel HCPL2730
HCPL2731
15
TA = 25°C 5 10
RL = 2.2Ω, IF = 1.6mA 6N138 50
Each Channel HCPL2730/1
RL = 2.2Ω, IF = 1.6mA, TA = 25°C 6N138 7 35
Each Channel HCPL2730/1 16
|CMH| Common Mode
Transient
Immunity at Logic
HIGH(3) (Fig. 25)
IF = 0mA, |VCM| = 10VP-P, TA = 25°C,
RL = 2.2Ω
6N138
6N139
1,000 10,000 V/µs
Each Channel HCPL2730
HCPL2731
|CML| Common Mode
Transient
Immunity at Logic
LOW(3) (Fig. 25)
(IF = 1.6mA, |VCM| = 10VP-P
, RL = 2.2Ω)
TA = 25°C
6N138
6N139
1,000 10,000 V/µs
Each Channel HCPL2730
HCPL2731
NOT RECOMMNEDED FOR NEW DESIGN
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N138, 5N139, NCPL2730, HCPL2731 Rev. 1.0.5 5
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL2730, HCPL2731 — Low Input Current High Gain Split Darlington Optocouplers
Electrical Characteristics (Continued) (TA = 0 to 70°C unless otherwise specified)
Isolation Characteristics
*All Typicals at TA = 25°C
Notes:
1. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current,
IF, times 100%.
2. Pin 7 open. (6N138 and 6N139 only)
3. Common mode transient immunity in logic HIGH level is the maximum tolerable (positive) dVcm/dt on the
leading edge of the common mode pulse signal VCM, to assure that the output will remain in a logic HIGH state
(i.e., VO > 2.0V). Common mode transient immunity in logic LOW level is the maximum tolerable (negative)
dVcm/dt on the trailing edge of the
common mode pulse signal, VCM, to assure that the output will remain in a logic LOW state (i.e., VO < 0.8V).
4. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are
shorted together.
5. For dual channel devices, CI-O is measured by shorting pins 1 and 2 or pins 3 and 4 together and pins 5 through 8
shorted together.
6. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together.
I
Symbol Characteristics Test Conditions Min. Typ.* Max. Unit
II-O Input-Output Insulation Leakage
Current(4) Relative humidity = 45%,TA = 25°C,
t = 5s, VI-O = 3000VDC
1.0 µA
VISO Withstand Insulation Test
Voltage(4) RH ≤ 50%, TA = 25°C, II-O ≤ 2µA,
t = 1 min.
2500 VRMS
RI-O Resistance (Input to Output)(4) VI-O = 500VDC 1012 Ω
CI-O Capacitance (Input to Output)(4)(5) f = 1MHz 0.6 pF
II-I Input-Input Insulation Leakage
Current(6) RH ≤ 45%, VI-I = 500VDC, t = 5s,
HCPL2730/2731 only
0.005 µA
RI-I Input-Input Resistance(6) VI-I = 500VDC, HCPL2730/2731 only 1011 Ω
CI-I Input-Input Capacitance(6) f = 1MHz, HCPL2730/2731 only 0.03 pF
NOT RECOMMNEDED FOR NEW DESIGN
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N138, 5N139, NCPL2730, HCPL2731 Rev. 1.0.5 6
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL2730, HCPL2731 — Low Input Current High Gain Split Darlington Optocouplers
Electrical Characteristics (Continued) TA = 25°C unless otherwise specified)
Current Limiting Resistor Calculations
R1 (Non-Invert) = VDD1 – VDF – VOL1
IF
R1 (Invert) = VDD1 – VOH1 – VDF
IF
R2 = VDD2 = VOLX (@ IL – I2)
IL
Where:
VDD1 = Input Supply Voltage
VDD2 = Output Supply Voltage
VDF = Diode Forward Voltage
VOL1 = Logic “0” Voltage of Driver
VOH1 = Logic “1” Voltage of Driver
IF = Diode Forward Current
VOLX = Saturation Voltage of
Output Transistor
IL = Load Current Through
Resistor R2
I2 = Input Current of Output Gate
Fig. 2 Non-Inverting Logic Interface Fig. 3 Inverting Logic Interface
Fig. 1 Resistor Values for Logic Interface
3
4
2
1
6
5
7
8
2
R
1
RIN OUT
VDD1 DD2
V
IN
4
3
2
5
6
7R2
OUT
1 8
DD2
V
R1
INPUT R1 (V)
OUTPUT
CMOS
@ 5V CMOS
@ 10V 74XX 74LXX 74SXX 74LSXX 74HXX
R2 (V) R2 (V) R2 (V) R2 (V) R2 (V) R2 (V) R2 (V)
CMOS
@ 5V
NON-INV. 2000 1000 2200 750 1000 1000 1000 560
INV. 510
CMOS
@ 10V
NON-INV. 5100
INV. 4700
74XX NON-INV. 2200
INV. 180
74LXX NON-INV. 1800
INV. 100
74SXX NON-INV. 2000
INV. 360
74LSXX NON-INV. 2000
INV. 180
74HXX NON-INV. 2000
INV. 180
NOT RECOMMNEDED FOR NEW DESIGN
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N138, 5N139, NCPL2730, HCPL2731 Rev. 1.0.5 7
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL2730, HCPL2731 — Low Input Current High Gain Split Darlington Optocouplers
Typical Performance Curves
Fig. 4 LED Forward Current vs. Forward Voltage
FORWARD VOLTAGE - VF (V)
1.0 1.1 1.2 1.3 1.4 1.5 1.6
FORWARD CURRENT - IF (mA)
0.001
0.01
0.1
1
10
100
TA = 85˚C
TA = 70˚C
TA = -40˚C
TA = 0˚C
TA = 25˚C
Fig. 5 LED Forward Voltage vs. Temperature
TEMPERATURE - TA (˚C)
-40 -20 0 20 40 60 80 100
FORWARD VOLTAGE - VF (V)
1.1
1.2
1.3
1.4
1.5
IF = 1.6 mA
Fig. 6 Non-saturated Rise and Fall Times vs.
Load Resistance (6N138 / 6N139 Only)
Fig. 7 Non-saturated Rise and Fall Times vs.
Load Resistance (HCPL2730 / HCPL2731 Only)
RL - LOAD RESISTANCE (kΩ)R
L - LOAD RESISTANCE (kΩ)
0.1 1 10
TIME, T (µs)
1
10
100
tf
TA = 25˚C
IF ADJUSTED FOR VOL = 2 V
tr
IF - FORWARD CURRENT - mA
Fig. 9 Current Transfer Ratio vs. Forward Current
(6N138 / 6N139 Only)
0.01 0.1 1 10
CURRENT TRANSFER RATIO - CTR (%)
0
400
800
1200
1600
TA = -40˚C
TA = 0˚C
TA = 25˚C
TA = 70˚C
TA = 85˚C
VCC = 5V
VO = 0.4V
0.1 1 10
TIME - µs
1
10
tf
tr
TA = 25˚C
TPHL - PROPAGATION DELAY TO LOGIC LOW - (µs)
Fig. 8 Propagation Delay To Logic Low
vs. Base-Emitter Resistance
(HCPL2730 / HCPL2731 Only)
RBE - BASE-EMITTER RESISTANCE - M
Ω
0.01 0.1 1 10
0
1
2
3
4
5
6
IF = 1.6 mA, VCC = 5 V
RL = 2.2 K, TA = 25°C
Normalized to RBE = None
NOT RECOMMNEDED FOR NEW DESIGN
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N138, 5N139, NCPL2730, HCPL2731 Rev. 1.0.5 8
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL2730, HCPL2731 — Low Input Current High Gain Split Darlington Optocouplers
Typical Performance Curves (Continued)
Fig. 15 Output Current vs
Input Diode Forward Current
(HCPL2730 / HCPL2731 Only)
IF - INPUT DIODE FORWARD CURRENT -mAIF - INPUT DIODE FORWARD CURRENT -mA
0.1 1 10 100
I
O
- OUTPUT CURRENT -mA
0.1
1
10
100
TA = -40˚C
TA = 25˚C
TA = 85˚C
VCC = 5.0V
VO = 0.4V
Fig. 14 Output Current vs. Input Diode Forward Current
(6N138 / 6N139 Only)
0.01 0.1 1 10
I
O
- OUTPUT CURRENT (mA)
0
0
1
10
100
TA = -40˚C
TA = 0˚C
TA = 25˚C
TA = 70˚C
VCC = 5V
VO = 0.4V
TA = 85˚C
Fig. 13 Output Current vs Output Voltage
(HCPL2730 / HCPL2731 Only)
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
I
O
-OUTPUT CURRENT -mA CTR - CURRENT TRANSFER RATIO (%)
20
40
60
80
100
120
TA = 25˚C
VCC = 5.0V
IF = 4.0mA
IF = 5.0mA
IF = 1.0mA
IF = 0.5mA
IF = 2.0mA
IF = 2.5mA
IF = 3.0mA
IF = 1.5mA
IF = 4.5mA
IF = 3.5mA
Fig. 12 Output Current vs Output Voltage
(6N138 / 6N139 Only)
VO - OUTPUT VOLTAGE (V) VO - OUTPUT VOLTAGE (V)
012
I
O
- OUTPUT CURRENT (mA)
0
10
20
30
40
50
60
1mA
2mA
5mA
3mA
1.5mA
2.5mA
3.5mA
4mA
4.5mA
VCC = 5V
TA = 25˚C
Fig. 11 Current Transfer Ratio vs. Forward Current
(HCPL2730 / HCPL2731 Only)
IF - FORWARD CURRENT -mA RBE - BASE RESISTANCE (kΩ)
0.1 1 10 100
0
1000
2000
3000
4000
5000
VCC = 5 V
VO = 0.4 V
TA = 70˚C
TA = 85˚C
TA = 25˚C
TA = 0˚C
TA = -40˚C
CTR - CURRENT TRANSFER RATIO (%)
Fig. 10 Current Transfer Ratio vs. Base-Emitter Resistance
(6N138 / 6N139 Only)
1101001000
0
200
400
600
800
1000
1200
1400
1600
IF = 1.6mA
VCC = 5 V
VO = 0.4 V
NOT RECOMMNEDED FOR NEW DESIGN
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N138, 5N139, NCPL2730, HCPL2731 Rev. 1.0.5 9
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL2730, HCPL2731 — Low Input Current High Gain Split Darlington Optocouplers
Typical Performance Curves (Continued)
Fig. 19 Propagation Delay vs. Input Diode Forward Current
(HCPL2730 / HCPL2731 Only)
IF - INPUT DIODE FORWARD CURRENT (mA)IF - INPUT DIODE FORWARD CURRENT (mA)
0246810
t
P
- PROPAGATION DELAY - µs
0
10
20
30
40
50
60
70
(tPHL) RL = 2.2 kΩ or 4.7 kΩ
(tPLH) RL = 4.7 kΩ
(tPLH) RL = 2.2 kΩ
VCC = 5 V
TA = 25˚C
Fig. 21 Propagation Delay to Logic Low vs. Pulse Period
(HCPL2730 / HCPL2731 Only)
0.01 0.1 1 10
t
PHL
- PROPAGATION DELAY to LOGIC LOW (µs)
Fig. 20 Propagation Delay to Logic Low vs. Pulse Period
(6N138 / 6N139 Only)
T - INPUT PULSE PERIOD - ms T - INPUT PULSE PERIOD - ms
t
PHL
- PROPAGATION DELAY to LOGIC LOW - µs
0.1
1
10
100
HCPL2730
HCPL2731
IF =1.6mA
RL = 2.2kΩTA = 25˚C
HCPL2731
IF = 0.5mA
RL = 4.7kΩ
Fig. 18 Propagation Delay vs. Input Diode Forward Current
(6N138 / 6N139 Only)
t
P
- PROPAGATION DELAY - µs
012345678910
0
10
20
30
40
50
60
70
0.01 0.1 1 10
0.1
1
10
100
(tPHL) RL = 2.2 kΩ or 4.7 kΩ
(tPLH) RL = 4.7 kΩ
(tPLH) RL = 2.2 kΩ
VCC = 5 V
TA = 25˚C
6N139
IF = 0.5mA
RL = 4.7kΩ
6N138
IF = 1.6mA
RL = 2.2kΩ
TA = 25˚C
Fig. 16 Logic Low Supply Current vs.
Input Diode Forward Current
(6N138 / 6N139 Only)
IF - FORWARD CURRENT (mA)
0246810121416
I
CCL
- LOGIC LOW SUPPLY CURRENT (mA)
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
VCC = 5V
VCC = 18V
Fig. 17 Logic Low Supply Current vs.
Input Diode Forward Current
(HCPL2730 / HCPL2731 Only)
IF - INPUT DIODE FORWARD CURRENT (mA)
0.1 1 10 100
I
CCL
- LOGIC LOW SUPPLY CURRENT - mA
0.1
1
10
100
TA = 25˚C
HCPL2731
VCC = 18V
HCPL2730
HCPL2731
VCC = 7V
NOT RECOMMNEDED FOR NEW DESIGN
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N138, 5N139, NCPL2730, HCPL2731 Rev. 1.0.5 10
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL2730, HCPL2731 — Low Input Current High Gain Split Darlington Optocouplers
Typical Performance Curves (Continued)
Fig. 22 Propagation Delay vs. Temperature
(6N138 / 6N139 Only)
TA - TEMPERATURE (˚C)
01020304050607080
t
P
- PROPAGATION DELAY (µs)
0
10
20
30
40
50
HCPL2730 : IF = 1.6 mA, RL = 2.2kΩ
HCPL2731 : IF = 0.5 mA, RL = 4.7kΩ
tPLH (HCPL2731)
tPLH (HCPL2730)
tPHL (HCPL2730)
tPHL (HCPL2731)
Fig. 23 Propagation Delay vs. Temperature
(HCPL2730 / HCPL2731 Only)
TA - TEMPERATURE (˚C)
01020304050607080
t
P
- PROPAGATION DELAY (µs)
0
10
20
30
40
50
HCPL2730 : IF = 1.6mA, RL = 2.2kΩ
HCPL2731 : IF = 0.5mA, RL = 4.7kΩ
tPLH (HCPL2731)
tPLH (HCPL2730)
tPHL (HCPL2730)
tPHL (HCPL2731)
NOT RECOMMNEDED FOR NEW DESIGN
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N138, 5N139, NCPL2730, HCPL2731 Rev. 1.0.5 11
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL2730, HCPL2731 — Low Input Current High Gain Split Darlington Optocouplers
Test Circuits
Pulse Gen
CM
V
VFF
B
A
+-
+5 V
O
V
-
IF
3
4
F
V
2
1Shield
Noise
6O
5GND
7
8
V
B
V
CC
V
L
R
PLH
OL
V
VO5 V
1.5 V
F
I
1.5 V
T
PHL
T
Switch at A : I = 0 mA
F
Switch at B : I = 1.6 mA
F
tr
VO
O
V
OL
V
5 V
0 V 10% 10%
90%
CM
V 10 V
4 5
Noise
1
2
3
Shield 8
7
6
+5 V
O
V
VCC
V01
V02
GND
VF1
-
+
F2V
FI+
10% DUTY CYCLE
I/f < 100 µS
FI
MONITOR
LR0.1 µF
Pulse
Generator
tr = 5ns
Z = 50V
O
GND
+
-
F2V
VF1
-
+5 V
CCV
L
V02
V
R
01 VO
VCM
A
B
Pulse Gen
F
I
+-
+
3
I Monitor
F4
I/ < 100ns
10% D.C.
tr = 5ns
Generator
Pulse
Z = 50
f
O
VF
I
V
F2
1
VO
O
6
5GND
7
8
V
B
V
L
R
CC
V+5 V
0.1 µF
LC = 15 pF*
Test Circuit for 6N138, 6N139
0.1 µF
Test Circuit for HCPL2730 and HCPL2731
Test Circuit for 6N138 and 6N139 Test Circuit for HCPL2730 and HCPL2731
f
t
FF
V
m
RRm
90%
1
3
4
2
Shield
Noise
8
6
5
7
Shield
Noise
-
C = 15 pF*L
0.1 µF
Fig. 24 Switching Time Test Circuit
Fig. 25 Common Mode Immunity Test Circuit
NOT RECOMMNEDED FOR NEW DESIGN
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N138, 5N139, NCPL2730, HCPL2731 Rev. 1.0.5 12
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL2730, HCPL2731 — Low Input Current High Gain Split Darlington Optocouplers
Ordering Information
Marking Information
Option Example Part Number Description
No Suffix 6N138 Standard Through Hole Device, 50 pcs per tube
S 6N138S Surface Mount Lead Bend
SD 6N138SD Surface Mount; Tape and reel
W 6N138W 0.4" Lead Spacing
V 6N138V VDE0884
WV 6N138WV VDE0884; 0.4” lead spacing
SV 6N138SV VDE0884; surface mount
SDV 6N138SDV VDE0884; surface mount; tape and reel
1
2
6
43 5
Definitions
1 Fairchild logo
2 Device number
3VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4 Two digit year code, e.g., ‘07’
5 Two digit work week ranging from ‘01’ to ‘53’
6 Assembly package code
2730
T1YYXXV
NOT RECOMMNEDED FOR NEW DESIGN
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N138, 5N139, NCPL2730, HCPL2731 Rev. 1.0.5 13
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL2730, HCPL2731 — Low Input Current High Gain Split Darlington Optocouplers
Tape Specifications
Reflow Profile
4.0 ± 0.1
Ø1.55 ± 0.05
User Direction of Feed
4.0 ± 0.1
1.75 ± 0.10
7.5 ± 0.1
16.0 ± 0.3
12.0 ± 0.1
0.30 ± 0.05
13.2 ± 0.2
4.90 ± 0.20
0.1 MAX 10.30 ± 0.20
10.30 ± 0.20
Ø1.6 ± 0.1
• Peak reflow temperature: 225C (package surface temperature)
• Time of temperature higher than 183C for 60–150 seconds
• One time soldering reflow is recommended
215 C, 10–30 s
225 C peak
Time (Minute)
0
300
250
200
150
100
50
00.5 1 1.5 2 2.5 3 3.5 4 4.5
Temperature (°C)
Time above 183C, 60–150 sec
Ramp up = 3C/sec
NOT RECOMMNEDED FOR NEW DESIGN
NOT RECOMMNEDED FOR NEW DESIGN
NOT RECOMMNEDED FOR NEW DESIGN
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
NOT RECOMMNEDED FOR NEW DESIGN
