Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
TE Connectivity also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notificati on to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN A CCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE
ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Page 1 of 2
Raychem, TE Connectivity, and TE connectivity (logo) are trademarks.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: 1-800-522-6752
Fax: 1-650-361-6297
DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL B E OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
© 2017 TE Connectivity Ltd . family of companies. All Rights Reserved .
Title SPECIFICATION CONTROL DRAWING SCD 55PC0811
WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED,
NORMAL WEIGHT, GENERAL PURPOSE, 600 VOLT Date 6-21-17 Revision G
This specification sheet forms a part of the latest issue of Raychem Specification 55PC.
CONDUCTOR - TIN-COATED COPPER INSULATION - RADIATION-CROSSLINKED,
MODIFIED ETFE
CONSTRUCTION DETAILS
PART NUMBER
1/
WIRE
SIZE
(AWG)
CONDUCTOR
STRANDING
(number x AWG)
DIAMETER OF
STRANDED CONDUCTOR
(inch)
FINISHED WIRE
MAXIMUM
RESISTANCE
AT 20°C
(ohms/1000 ft.)
DIAMETER
(inch) WEIGHT
(lbs/1000 ft.)
LOWER
SPEC LIMIT TARGET
VALUE UPPER
SPEC LIMIT LOWER
SPEC LIMIT TARGET
VALUE UPPER
SPEC LIMIT TARGET
VALUE UPPER
SPEC LIMIT
55PC0811-26-* 26 19 x 38 .0175 .0183 .0191 41.3 .0366 .0385 .0404 1.55 1.70
55PC0811-24-* 24 19 x 36 .0225 .0233 .0241 26.2 .0416 .0435 .0454 2.18 2.34
55PC0811-22-* 22 19 x 34 .0285 .0293 .0301 16.2 .0476 .0495 .0514 3.12 3.30
55PC0811-20-* 20 19 x 32 .0365 .0375 .0385 9.88 .0561 .0580 .0599 4.64 4.85
55PC0811-18-* 18 19 x 30 .0452 .0464 .0476 6.23 .0659 .0680 .0701 6.94 7.27
55PC0811-16-* 16 19 x 29 .0514 .0527 .0538 4.81 .0737 .0760 .0783 8.80 9.17
55PC0811-14-* 14 19 x 27 .0644 .0659 .0674 3.06 .0896 .0920 .0944 13.50 13.99
55PC0811-12-* 12 37 x 28 .0825 .0845 .0865 2.02 .1076 .1105 .1134 20.45 21.08
55PC0811-10-* 10 37 x 26 .1050 .1070 .1090 1.26 .1290 .1330 .1370 31.73 32.78
55PC0811-8-* 8 133 x 29 .158 .163 .169 .701 .188 .196 .203 56.8 59.9
55PC0811-6-* 6 133 x 27 .198 .205 .212 .445 .233 .242 .251 89.7 94.7
55PC0811-4-* 4 133 x 25 .250 .260 .268 .280 .300 .311 .322 146. 154.
55PC0811-2-* 2 665 x 30 .320 .330 .340 .183 .370 .383 .397 227. 240.
55PC0811-0-* 0 1045 x 30 .395 .415 .425 .116 .449 .466 .483 343. 366.
55PC0811-00-* 00 1330 x 30 .440 .462 .475 .091 .505 .525 .545 450. 481.
55PC0811-000-* 000 1665 x 30 .515 .528 .540 .071 .568 .590 .612 559. 599.
55PC0811-0000-* 0000 2109 x 30 .565 .595 .605 .056 .646 .670 .694 684. 735.
SPECIFICATION CONTROL DRAWING Page
2 of 2
Revision
G
SCD
55PC0811
WIRE RATINGS AND ADDITIONAL RE QUIREMENTS
TEMPERATURE RATING: 150°C
Maximum continuous conductor tempe rature
VOLTAGE RATING: 600 volts (rms) at sea level
COLOR: White preferred
CROSSLINKED VERIFICATION: 300 ± 3°C for 1 hour
IDENTIFICATION AND COLOR STRIPING DURABILITY:
125 cycles (250 strokes) (minimum), 500 g weight
INSULATION ELONGATION AND TENSILE STRENGTH:
Total Insulation,
Elongation, 50% (minimum)
Tensile Strength, 5000 lbf/in2 (minimum)
INSULATION FLAWS:
Spark Test, 3.0 kV (rms)
Impulse Dielectric Test, 8.0 kV (peak)
INSULATION THICKNESS: .010 in. (nominal) total insulation
SHRINKAGE: 230 ± 3°C for 1 hour, 0. 125 inch (maximum) in 12 inches
VOLTAGE WITHSTAND (Post Environmental): 2500 volts (rms)
1/ PART NUMBER:
The "*" in the part numbers on page 1 shall be repl aced by a color code designator.
Example: AWG 22, white: 55PC0811-22-9
AWG 22, white with a black stripe: 55PC0811-22-90
1/ See footer section on page 1
