PVG5.pdf 12/19/17 Trimmer Potentiometers 3.9 (.155) 3.5 (.139) 1 1.2 (.047) 2.5 (.100) Features 3 1. Surface Mount 5 mm Square / Multiturn / Cermet / Sealed 2. Available in both top and side adjustment 3. Units can be pre-adjusted at clockwise, counter-clockwise or standard 50 % position 4. 5 mm design meets EIA/EIAJ/IPC/VECI SMD standard trimmer footprint 5. RoHS compliant* 6. For trimmer applications/processing guidelines, click here 2 1.5 DIA. (.060) 2.6 (.103) ADJUSTMENT SLOT 0.6 WIDE (.022) 0.5 DEEP X (.020) #2 (Wiper) #1 #3 1.3 (.050) 4.8 (.190) 1.0 3 PLCS. (.040) 5.3 (.208) 0.7 (.028) PVG5A Circuit 5.1 (.200) PVG5 A 603C SMD Sealed Type Multiturn PVG5 Series Clockwise 0.8 (.032) 0.2 (.007) PVG5H 1.2 (.047) 2.6 (.102) 2.4 (.095) 5.0 (.195) 4.6 (.180) Circuit #2 (Wiper) #1 #3 Clockwise ADJUSTMENT SLOT 0.6 WIDE (.022) 0.5 DEEP X (.020) DIMENSIONS: MM (INCHES) 1 2 PVG5 H 603C 1.5 DIA. (.060) 4.8 (.190) 3 2.3 (.090) 3.71 (.146) 0.8 (.032) 0.2 (.007) TOLERANCES: 0.25 (.010) EXCEPT WHERE NOTED Top Adjustment Part Number Power Rating (W) Number of Turns (Effective Rotation Angle) Total Resistance Value TCR (ppm/C) PVG5A100C03R00 0.25 (70 C) 12 10 ohm 10% 150 PVG5A200C03R00 0.25 (70 C) 12 20 ohm 10% 150 PVG5A500C03R00 0.25 (70 C) 12 50 ohm 10% 150 PVG5A101C03R00 0.25 (70 C) 12 100 ohm 10% 150 PVG5A201C03R00 0.25 (70 C) 12 200 ohm 10% 150 PVG5A501C03R00 0.25 (70 C) 12 500 ohm 10% 150 PVG5A102C03R00 0.25 (70 C) 12 1k ohm 10% 150 PVG5A202C03R00 0.25 (70 C) 12 2k ohm 10% 150 PVG5A502C03R00 0.25 (70 C) 12 5k ohm 10% 150 PVG5A103C03R00 0.25 (70 C) 12 10k ohm 10% 150 PVG5A203C03R00 0.25 (70 C) 12 20k ohm 10% 150 PVG5A503C03R00 0.25 (70 C) 12 50k ohm 10% 150 PVG5A104C03R00 0.25 (70 C) 12 100k ohm 10% 150 PVG5A204C03R00 0.25 (70 C) 12 200k ohm 10% 150 PVG5A504C03R00 0.25 (70 C) 12 500k ohm 10% 150 PVG5A105C03R00 0.25 (70 C) 12 1M ohm 10% 150 PVG5A205C03R00 0.25 (70 C) 12 2M ohm 10% 150 Operating Temperature Range: -55 to +125 C Soldering Method: Forced Hot Air, Convection, IR, Vapor Phase (In-Line) WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PVG5.pdf 12/19/17 Side Adjustment Part Number Power Rating (W) Number of Turns (Effective Rotation Angle) Total Resistance Value TCR (ppm/C) PVG5H100C03B00 0.25 (70 C) 12 10 ohm 10% 150 PVG5H200C03B00 0.25 (70 C) 12 20 ohm 10% 150 PVG5H500C03B00 0.25 (70 C) 12 50 ohm 10% 150 PVG5H101C03B00 0.25 (70 C) 12 100 ohm 10% 150 PVG5H201C03B00 0.25 (70 C) 12 200 ohm 10% 150 PVG5H501C03B00 0.25 (70 C) 12 500 ohm 10% 150 PVG5H102C03B00 0.25 (70 C) 12 1k ohm 10% 150 PVG5H202C03B00 0.25 (70 C) 12 2k ohm 10% 150 PVG5H502C03B00 0.25 (70 C) 12 5k ohm 10% 150 PVG5H103C03B00 0.25 (70 C) 12 10k ohm 10% 150 PVG5H203C03B00 0.25 (70 C) 12 20k ohm 10% 150 PVG5H503C03B00 0.25 (70 C) 12 50k ohm 10% 150 PVG5H104C03B00 0.25 (70 C) 12 100k ohm 10% 150 PVG5H204C03B00 0.25 (70 C) 12 200k ohm 10% 150 PVG5H504C03B00 0.25 (70 C) 12 500k ohm 10% 150 PVG5H105C03B00 0.25 (70 C) 12 1M ohm 10% 150 PVG5H205C03B00 0.25 (70 C) 12 2M ohm 10% 150 Operating Temperature Range: -55 to +125 C Soldering Method: Forced Hot Air, Convection, IR, Vapor Phase (In-Line) Standard Land Pattern PVG5A PVG5H 2.0 (.079) 2.0 (.079) 1.6 (.063) 1.6 (.063) 2.8 (.110) 2.25 (.089) 2.25 (.089) 2.8 (.110) 1.6 (.063) 1.3 (.051) 1.2 (.047) 1.6 (.063) 1.3 (.051) 1.3 (.051) 1.0 (.039) DIMENSIONS: 1.3 (.051) MM (INCHES) TOLERANCES: 0.1 (.004) EXCEPT WHERE NOTED Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PVG5.pdf 12/19/17 Characteristics Part Numbering Temperature Cycle TR : 2% V.S.S.: 1% Humidity TR IR Vibration (20G) TR : 1% V.S.S.: 1% Shock (100G) TR : 1% V.S.S.: 1% Temperature Load Life TR : 3% or 3 ohm max., whichever is greater V.S.S.: 1% Low Temperature Exposure TR : 1% V.S.S.: 1% High Temperature Exposure TR : 2% V.S.S.: 1% Rotational Life TR Product ID PV = Trimming Potentiometer : 2% : 10M ohm min. PV G5 A 103 C03 B00 Series G5 = SMD Sealed 5 mm Square, 12 Turns Adjustment Direction/Lead Type A = Top H = Side : 3% or 3 ohm max., whichever is greater (100 cycles) TR : Total Resistance Change V.S.S.: Voltage Setting Stability IR : Insulation Resistance Typical Part Marking 3-Digit Date Code and Manufacturing Code - First digit indicates year of manufacture; - Last two digits indicate week of manufacture; - 4th digit is suffix for manufacturing location: C = Costa Rica Example: 604C = Manufactured in 2016, week 4, Costa Rica Total Resistance Expressed by three figures. The first and second figures are significant digits; the third figure expresses the number of zeros that follow. Resistance (Ohms) 10 20 50 100 200 500 1,000 2,000 5,000 10,000 20,000 50,000 100,000 200,000 500,000 1,000,000 2,000,000 Resistance Code 100 200 500 101 201 501 102 202 502 103 203 503 104 204 504 105 205 Popular distribution values listed in boldface. Special resistances available. Individual Specification C03 = Standard Type Packaging B00 = Tube (50 pcs. per tube) R00 = 7 " Reel (250 pcs. per reel) - Style A 7 " Reel (500 pcs. per reel) - Style H Resistance Code - Resistance code marking as shown in the Part Numbering Resistance Table. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and P[ZHSPH[LZJVSSLJ[P]LS)V\YUZ Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL