Cat.No.P05E-16
Ceramic Filters (CERAFILr)/
Ceramic Discriminators
for Communications
Equipment
!Note P05E.pdf
Nov.24,2011
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
EU RoHS Compliant
s All the products in this catalog comply with EU RoHS.
s EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment."
s For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
!Note P05E.pdf
Nov.24,2011
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
!Note P05E.pdf
Nov.24,2011
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
CERAFILr and "CERAFIL" in this catalog are
the trademarks of Murata Manufacturing Co., Ltd.
CONTENTS
Part Numbering 2
Products Guide 4
CERAFILr kHz SMD Type SFPKA Series 5
CERAFILr kHz SMD Type CFUKG Series 7
CERAFILr kHz SMD Type CFUKG_X Series 9
CERAFILr kHz SMD Type CFUKF Series 11
CERAFILr kHz SMD Type CFWKA Series 13
CERAFILr kHz SMD Type CFWKA_Y Series 15
kHz SMD Type CERAFILr Notice 17
CERAFILr MHz SMD Type SFECF10M7 Series 21
CERAFILr MHz SMD Type SFSCE10M7 Series 23
MHz SMD Type CERAFILr Notice 25
SMD Type CERAFILr Standard Land Pattern Dimensions 31
kHz SMD Type CERAFILr Packaging 32
MHz SMD Type CERAFILr Packaging 34
CERAFILr Plastic Case General Use CFULA Series 35
CERAFILr Plastic Case General Use CFWLA Series 37
CERAFILr Plastic Case Miniaturized Type CFULB Series 39
CERAFILr Plastic Case Miniaturized Type CFWLB Series 41
CERAFILr Plastic Case Group Delay Flat Type CFULA_Y Series 43
CERAFILr Plastic Case Group Delay Flat Type CFWLA_Y Series 45
CERAFILr Plastic Case Group Delay Flat Type Miniaturized Type CFULB_Y Series
47
CERAFILr Plastic Case Group Delay Flat Type CFWLB_Y Series 49
Plastic Case Type CERAFILr Minimum Quantity/Notice 51
kHz Type Ceramic Discriminators 52
MHz Type Ceramic Discriminators 65
Ceramic Discriminators Notice 70
Ceramic Discriminators Standard Land Pattern Dimensions/Packaging 74
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
!Note P05E.pdf
Nov.24,2011
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
2
o Part Numbering
yewrt uq
KA
P 455K D4A -R0
SF
S0CFE 10M7 DF00 -R0
SF
(Part Number)
qProduct ID
wOscillating/Element
Ceramic Filters (CERAFILr) for IF
CF
SF
U
W
P
E
S
Ceramic Filters
Three-digit alphanumerics express pass bandwidth,
center frequency tolerance and design type.
Product ID
tProduct Specification
D4A
Code Product Specification
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is hertz (Hz). If
the unit is "kHz", it is expressed by three figures plus "K." If the
unit is "MHz", a decimal point is expressed by the capital letter
"M."
p is "A" or subsequent code, which indicates the size. It varies
depending on vibration mode and number of elements.
Chip type is only applied for SF series.
Expressed by three-digit alphanumerics.
yIndividual Specification
001
Code Individual Specification Code
Bulk
Embossed Taping ø=180mm
Embossed Taping ø=330mm
uPackaging
-B0
-R0
-R1
Code Packaging
Oscillating/Element
Chip Type
Lead Type
eStructure/Size
Cp/Kp
Lp
Code Structure/Size
4 Elements Area Expansion mode
6 Elements Area Expansion mode
4 Elements Area Expansion mode
2 Elements Thickness Expansion mode
2 Elements Thickness Shear mode
Embossed taping is applied to chip type.
SFE/S/J series are expressed by four-digit alphanumerics.
SFE/S/J series are expressed by two-digit alphanumerics.
With standard type, y is omitted.
!Note P05E.pdf
Nov.24,2011
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
3
e
CB
w
S
r
10M7
t
GF
u
-R0
y
001
q
CD
(Part Number)
qProduct ID
wOscillation
Ceramic Discriminators for IF (MHz)
CD Discriminators
Product ID
tProduct Specification
GF
Code Product Specification
With non-standard products, an alphanumerics indicating "Individual
Specification" is added between "yIC" and "uPackaging."
eStructure/Size
Embossed Taping ø=180mm
yIC
001
Code IC
Applicable IC Control Code
uPackaging
-R0
Code Packaging
Thickness Shear mode
S
Code Oscillation
Chip Type
Cp
Code Structure/Size
p is expressed "A" or subsequent code, which indicates the size.
Two-digit alphanumerics express
type, center frequency, rank, others
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M."
y
A
e
LB
w
B
r
450K
t
C
u
X
i
16
o
-B0
q
CD
(Part Number)
qProduct ID
Ceramic Discriminators for IF (kHz)
CD Ceramic Discriminators
Quadrature Detection
Product ID
tDetection
C
Code Detection
Embossed taping is applied to chip type. With non-standard products,
one letter indicating "Individual Specification" is added between
"iApplicable IC" and "oPackage Specification code."
p is "A" or subsequent code, which indicates the size. It varies
depending on vibration mode and number of elements.
Standard
Application with coil
yApplication
A
L
Code Application
Low-capacitance
High-capacitance
uElement Type
X
Y
Code Element Type
Applicable IC Control code
iIC
16
Code IC
Bulk
Embossed Taping ø=180mm
Embossed Taping ø=330mm
oPackaging
-B0
-R0
-R1
Code Packaging
Area Expansion mode
wOscillating
B
Code Oscillating
Chip Type
Lead Type
eStructure/Size
Cp/Kp
Lp
Code Structure/Size
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Capital letter "K" following three figures expresses the unit of
"kHz."
!Note P05E.pdf
Nov.24,2011
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
4
Type
Series
Applications
6dB Bandwidth (kHz) min.
General Use Attenuation
(dB) min.
oSMD Type (kHz)
High Selectivity
Series
(Plastic Case Type)
Narrow Bandwidth
GDT Flat Type
Miniature Series
(Plastic Case Type)
GDT Flat Type
Miniature Series
(Plastic Case Type)
GDT Flat Type
High Selectivity
SMD Series
(Plastic Case Type)
High Selectivity
SMD Series
(Plastic Case Type)
SFPKA455KM
(4 Elements)
CFUKG455KM
(4 Elements)
CFUKG455KMX
(4 Elements)
CFUKF455KM
(4 Elements)
CFWKA450KBFY
(6 Elements)
CFWKA450KM
(6 Elements)
oLead Type (kHz)
27 (G to H; 25)
27 (G; 25)
27 (G to H; 25)
25 (D to E; 23)
45
50
A
±17.5
–
–
–
o
–
–
B
±15
–
–
–
o
o
–
C
±12.5
–
–
–
o
–
–
D
±10
o
o
–
o
–
o
E
±7.5
o
o
o
o
–
o
F
±6
o
o
o
–
–
o
G
±4.5
o
o
o
–
–
o
H
±3
o
–
o
–
–
–
J
±2
–
–
–
–
–
–
K
±1.5
–
–
–
–
–
–
L
±1
–
–
–
–
–
–
Type
Series
Applications
6dB Bandwidth (kHz) min.
General Use Attenuation
(dB) min.
Within 455±80 or ±100kHz
Within 455±80 or ±100kHz
High Selectivity
Low Profile Series
High Selectivity
Miniature Series
GDT Flat Type
Series
GDT Flat Type
Miniature Series
CFULA455KM (4 Elements)
CFWLA455KM (6 Elements)
CFULB455KM (4 Elements)
CFWLB455KM (6 Elements)
CFULA455KMY (4 Elements)
CFWLA455KMY (6 Elements)
CFULB455KMY (4 Elements)
CFWLB455KMY (6 Elements)
27
35 (H, J; 60)
27
35 (H, J; 55)
25 (D to G; 23)
40
25 (D to G; 23)
40 (F; 35)
A
±17.5
–
–
–
–
–
o
–
o
B
±15
o
o
o
o
o
o
o
o
C
±12.5
o
o
o
o
o
o
o
o
D
±10
o
o
o
o
o
o
o
o
E
±7.5
o
o
o
o
o
o
o
o
F
±6
o
o
o
o
o
o
o
o
G
±4.5
o
o
o
o
o
o
o
o
H
±3
o
o
o
o
–
–
–
–
J
±2
–
o
o
o
–
–
–
–
K
±1.5
–
–
–
–
–
–
–
–
L
±1
–
–
–
–
–
–
–
–
(G; 25)
(H; 35)
(G; 25)
(H, J; 35)
Products Guide
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr kHz SMD Type SFPKA Series
The SFPKA series is comprised of small, high-performance,
economical, thin (5.0mm) fi lters consisting of 4 ceramic
elements. Their innovative construction is perfect for
shrinking mobile communication products such as cordless
phones, pagers and transceivers.
c Features
1. The fi lters are mountable by automatic placers.
2. The fi lters can be refl ow soldered and withstand
washing.
3. They are slim, at only 5.0mm maximum thickness.
4. The bandwidth ranges from D to H.
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
7.5±0.3
5.0 max.
3.0±0.3
8.4 max.
2.0±0.3
1.5±0.3
7.0±0.3
0.9±0.1
MARKING
EIAJ
CODE
2.0±0.3
(1) (2) (3)
1.5±0.3 1.6±0.3
Connection
(1): Input
(2): Ground
(3): Output
(in mm)
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Ripple
(dB)
Input/Output
Impedance
(ohm)
SFPKA455KD4A-R1 455
±1.5kHz
fn±10.0
min.
fn±20.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point]
2.0 max.
[within fn±7kHz] 1500
SFPKA455KE4A-R1 455
±1.5kHz
fn±7.5
min.
fn±15.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1.5 max.
[within fn±5kHz] 1500
SFPKA455KF4A-R1 455
±1.5kHz
fn±6.0
min.
fn±12.5 max.
[within 40dB]
27 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1.5 max.
[within fn±4kHz] 1500
SFPKA455KG1A-R1 455
±1.0kHz
fn±4.5
min.
fn±10.0 max.
[within 40dB]
25 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1.5 max.
[within fn±3kHz] 1500
SFPKA455KH1A-R1 455
±1.0kHz
fn±3.0
min.
fn±9.0 max.
[within 40dB]
35 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1.5 max.
[within fn±2kHz] 2000
Center frequency (fo) defi ned by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of fi lters to the IF amplifi er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
Rg+R1=R2=Input/Output Impedance
E1: S.S.G. Output Voltage
E1
R1
Rg
S.S.G.
0dBm
(1)
(2)
(3)
R2 E2
RF Voltmeter
(1): Input
(2): Ground
(3): Output
c Test Circuit
P05E.pdf
Nov.24,2011
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
1
100
40
30
20
10
0
Attenuation (dB)
G.D.T. (μsec.)
430 455 480
Frequency (kHz)
90
80
70
60
50
0
240
280
320
360
400
40
80
120
160
200
c Frequency Characteristics
SFPKA455KE4A-R1
100
40
30
20
10
0
Attenuation (dB)
200
Frequency (kHz)
90
80
70
60
50
300 400 500 600 700 800 900 1000
SFPKA455KE4A-R1
P05E.pdf
Nov.24,2011
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
1
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr kHz SMD Type CFUKG Series
The CFUKG series is comprised of small, high-performance,
thin (4.0mm) fi lters consisting of 4 ceramic elements.
Their innovative construction is perfect for shrinking
mobile communication products such as pocket pagers
and cellular phones.
c Features
1. The fi lters are mountable by automatic placers.
2. The fi lters can be refl ow soldered and withstand
washing.
3. They are slim, at only 4.0mm maximum thickness,
and have a small mounting area (7.5x6.0mm)
enabling fl exible PCB design.
4. The bandwidth ranges from D to G.
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
1.5±0.3 3.0±0.3
1.0±0.1
4.0±0.3
6.5±0.3
7.5 max.
C0.5 1.2±0.1
4.0 max.
1.0±0.1
(in mm)
Connection
(1): Input
(2): Output
(3): Ground
1.0±0.3 1.0±0.3
1.5±0.3
6.0±0.3
(1) (2)
(3)
MARKING
EIAJ
CODE
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Ripple
(dB)
Input/Output
Impedance
(ohm)
CFUKG455KD4A-R0 455
±1.5kHz
fn±10.0
min.
fn±20.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point]
2.0 max.
[within fn±7kHz] 1500
CFUKG455KE4A-R0 455
±1.5kHz
fn±7.5
min.
fn±15.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1.5 max.
[within fn±5kHz] 1500
CFUKG455KF4A-R0 455
±1.5kHz
fn±6.0
min.
fn±12.5 max.
[within 40dB]
27 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1.5 max.
[within fn±4kHz] 1500
CFUKG455KG1A-R0 455
±1.0kHz
fn±4.5
min.
fn±10.0 max.
[within 40dB]
25 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1.5 max.
[within fn±3kHz] 1500
Center frequency (fo) defi ned by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of fi lters to the IF amplifi er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
E1
Rg
S.S.G.
0dBm
R1
RF Voltmeter
Connection
(1): Input
(2): Output
(3): Ground
(2)
(3)
(1)
R2 E2
Rg+R1=R2=Input/Output Impedance
c Test Circuit
P05E.pdf
Nov.24,2011
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
2
100
40
30
20
10
0
Attenuation (dB)
0
100
200
300
400
G.D.T. (μsec.)
430 455 480
Frequency (kHz)
90
80
70
60
50
c Frequency Characteristics
CFUKG455KE4A-R0
100
40
30
20
10
0
Attenuation (dB)
200
Frequency (kHz)
90
80
70
60
50
300 400 500 600 700 800 900 1000
CFUKG455KE4A-R0
P05E.pdf
Nov.24,2011
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
2
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr kHz SMD Type CFUKG_X Series
The CFUKG_X series is comprised of small, high-
performance, thin (4.0mm) fi lters consisting of 4
ceramic elements.
The fi lters exhibit an extremely fl at GDT
characteristic combined with a narrow bandwidth.
The fi lters are recommended for narrow band digital
communication applications.
c Features
1. The fi lters are mountable by automatic placers.
2. The fi lters can be refl ow soldered and withstand
washing.
3. They are slim, at only 4.0mm maximum thickness,
and have a small mounting area (7.5x6.0mm)
enabling fl exible PCB design.
4. The bandwidth ranges from E to H.
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
1.5±0.3 3.0±0.3
1.0±0.1
4.0±0.3
6.5±0.3
7.5 max.
C0.5 1.2±0.1
4.0 max.
1.0±0.1
(in mm)
Connection
(1): Input
(2): Output
(3): Ground
1.0±0.3 1.0±0.3
1.5±0.3
6.0±0.3
(1) (2)
(3)
MARKING
EIAJ
CODE
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Ripple
(dB)
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
CFUKG455KE4X-R0
455
±1.5kHz
fn±7.5
min.
fn±17.5 max.
[within 40dB]
27 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1.0 max.
[within fn±5kHz]
25.0 max.
[within fn±5kHz] 1500
CFUKG455KF4X-R0
455
±1.5kHz
fn±6.0
min.
fn±15.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1.0 max.
[within fn±4kHz]
25.0 max.
[within fn±4kHz] 1500
CFUKG455KG1X-R0
455
±1.0kHz
fn±4.5
min.
fn±12.5 max.
[within 40dB]
25 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1.0 max.
[within fn±3kHz]
25.0 max.
[within fn±3kHz] 1500
CFUKG455KH1X-R0
455
±1.0kHz
fn±3.0
min.
fn±10.0 max.
[within 40dB]
25 min.
[within fn±100kHz]
7.0 max.
[at minimum loss point]
1.0 max.
[within fn±2kHz]
25.0 max.
[within fn±2kHz] 1500
Center frequency (fo) defi ned by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of fi lters to the IF amplifi er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
E1
Rg
S.S.G.
0dBm
R1
RF Voltmeter
Connection
(1): Input
(2): Output
(3): Ground
(2)
(3)
(1)
R2 E2
Rg+R1=R2=Input/Output Impedance
c Test Circuit
P05E.pdf
Nov.24,2011
9
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
3
100
40
30
20
10
0
Attenuation (dB)
0
50
100
150
200
G.D.T. (μsec.)
430 455 480
Frequency (kHz)
90
80
70
60
50
c Frequency Characteristics
CFUKG455KE4X-R0
100
40
30
20
10
0
Attenuation (dB)
200
Frequency (kHz)
90
80
70
60
50
300 400 500 600 700 800 900 1000
CFUKG455KE4X-R0
P05E.pdf
Nov.24,2011
10
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
3
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr kHz SMD Type CFUKF Series
The CFUKF series is comprised of small, high-performance,
thin (4.0mm) fi lters consisting of 4 ceramic elements.
The fi lters exhibit an extremely fl at GDT
characteristic.
The fi lters are recommended for digital
communication applications and are perfect in hand-held
cellular phones, etc.
c Features
1. The fi lters are mountable by automatic placers.
2. The fi lters can be refl ow soldered and withstand
washing.
3. They are slim, at only 4.0mm maximum thickness,
and have a small mounting area (7.5x6.0mm)
enabling fl exible PCB design.
4. The bandwidth ranges from A to E.
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
1.5±0.3 3.0±0.3
1.0±0.1
4.0±0.3
6.5±0.3
7.5 max.
C0.5 1.2±0.1
4.0 max.
1.0±0.1
(in mm)
Connection
(1): Input
(2): Output
(3): Ground
1.0±0.3 1.0±0.3
1.5±0.3
6.0±0.3
(1) (2)
(3)
MARKING
EIAJ
CODE
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Ripple
(dB)
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
CFUKF455KA2X-R0
455
±2.0kHz
fn±17.5
min.
fn±40.0 max.
[within 40dB]
25 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point]
1.0 max.
[within fn±12kHz]
15.0 max.
[within fn±12kHz] 1000
CFUKF455KB4X-R0
455
±1.5kHz
fn±15.0
min.
fn±35.0 max.
[within 40dB]
25 min.
[within fn±100kHz]
5.0 max.
[at minimum loss point]
1.0 max.
[within fn±10kHz]
15.0 max.
[within fn±10kHz] 1000
CFUKF455KC4X-R0
455
±1.5kHz
fn±12.5
min.
fn±30.0 max.
[within 40dB]
25 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1.0 max.
[within fn±8kHz]
15.0 max.
[within fn±8kHz] 1000
CFUKF455KD1X-R0
455
±1.0kHz
fn±10.0
min.
fn±25.0 max.
[within 40dB]
23 min.
[within fn±100kHz]
7.0 max.
[at minimum loss point]
1.0 max.
[within fn±7kHz]
20.0 max.
[within fn±7kHz] 1500
CFUKF455KE1X-R0
455
±1.0kHz
fn±7.5
min.
fn±20.0 max.
[within 40dB]
23 min.
[within fn±100kHz]
8.0 max.
[at minimum loss point]
1.0 max.
[within fn±5kHz]
20.0 max.
[within fn±5kHz] 1500
Center frequency (fo) defi ned by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of fi lters to the IF amplifi er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
E1
Rg
S.S.G.
0dBm
R1
RF Voltmeter
Connection
(1): Input
(2): Output
(3): Ground
(2)
(3)
(1)
R2 E2
Rg+R1=R2=Input/Output Impedance
c Test Circuit
P05E.pdf
Nov.24,2011
11
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
4
100
40
30
20
10
0
Attenuation (dB)
0
50
100
150
200
G.D.T. μ(sec.)
430 455 480
Frequency (kHz)
90
80
70
60
50
c Frequency Characteristics
CFUKF455KE1X-R0
100
40
30
20
10
0
Attenuation (dB)
200
Frequency (kHz)
90
80
70
60
50
300 400 500 600 700 800 900 1000
CFUKF455KE1X-R0
P05E.pdf
Nov.24,2011
12
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
4
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr kHz SMD Type CFWKA Series
The CFWKA series is comprised of small, high-performance,
thin (3.0mm) fi lters consisting of 6 ceramic elements.
The fi lters are recommend for pager or hand-held
cellular phones.
c Features
1. The fi lters are mountable by automatic placers.
2. The fi lters can be refl ow soldered.
3. They are slim, at only 3.0mm maximum thickness.
4. The fi lters are wide bandwidth, fl at GDT within
pass band.
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
MARKING
6.5
7.5 max.
3.0max.
11.5
5.5 3.0
1.2±0.1
1.5±0.3
1.2±0.1 1.2±0.1
1.5±0.3
1.2±0.1 C0.3
3.0
3.0 5.5
Dot marking
Sealing
Sealing
: Input
: Output
: Ground
(1)
(1)
(2)
(3)(4)
(2)
(4) (3)
EIAJ
CODE
Tolerance ±0.3mm
in mm
()
Part Number
Nominal Center
Frequency (fn)
(kHz)
3dB
Bandwidth
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Stop Band Att.(2)
(dB)
Insertion Loss
(dB)
Ripple
(dB)
Input/Output
Impedance
(ohm)
CFWKA450KDFA-R0
450.0 - fn±10.0
min.
fn±20.0 max.
[within 50dB]
50 min.
[within fn±100kHz] -4.0 max.
[at minimum loss point]
3.0 max.
[within fn±7kHz] 1500
CFWKA450KEFA-R0
450.0 - fn±7.5
min.
fn±15.0 max.
[within 50dB]
50 min.
[within fn±100kHz] -6.0 max.
[at minimum loss point]
3.0 max.
[within fn±5kHz] 1500
CFWKA450KEFA001-R0
450.0 fn±6.5
min. -fn±15.0 max.
[within 50dB]
55 min.
[fn±18 to ±33kHz]
50 min.
[within fn±100kHz]
4.0 max.
[at fn]
3.0 max.
[within fn±6.5kHz] 1500
CFWKA450KFFA-R0
450.0 - fn±6.0
min.
fn±12.5 min.
[within 50dB]
50 min.
[within fn±100kHz] -6.0 max.
[at minimum loss point]
3.0 max.
[within fn±4kHz] 1500
CFWKA450KGFA-R0
450.0 - fn±4.5
min.
fn±11.0 max.
[within 50dB]
50 min.
[within fn±100kHz] -6.0 max.
[at minimum loss point]
2.0 max.
[within fn±3kHz] 1500
For safety purposes, connect the output of fi lters to the IF amplifi er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
E1
Rg
S.S.G.
0dBm
R1
RF Voltmeter
Connection
(1): Input
(2): Output
(3)(4): Ground
(2)
(4)
(1)
R2 E2
(3)
Rg+R1=R2=Input/Output Impedance
c Test Circuit
P05E.pdf
Nov.24,2011
13
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
5
Frequency (kHz)
Attenuation (dB)
G.D.T. (μ sec.)
400
300
200
100
0
440.0 450.0 460.0
0
4
8
12
16
20
24
28
32
36
40
c Frequency Characteristics
CFWKA450KEFA001-R0
10
0
20
30
40
50
60
70
80
90
100
430 455 480
Frequency (kHz)
Attenuation (dB)
CFWKA450KEFA001-R0
Frequency (kHz)
Attenuation (dB)
200 300 400 500 600 700 800 900 1000
0
10
20
30
40
50
60
70
80
90
100
CFWKA450KEFA001-R0
P05E.pdf
Nov.24,2011
14
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
5
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr kHz SMD Type CFWKA_Y Series
The CFWKA_Y series is comprised of small, high-
performance, thin (3.0mm) fi lters consisting of 6
ceramic elements. The fi lters are recommend for
digital communication applications and are perfect
in hand-held cellular phones.
c Features
1. The fi lters are mountable by automatic placers, and
can be refl ow soldered.
2. They are slim, at only 3.0mm maximum thickness.
3. The fi lters are wide bandwidth, fl at GDT within
pass band.
4. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
Y50
B 1
6.5
7.5 max.
3.0 max.
11.5
5.5 3.0
1.2±0.1
1.5±0.3
1.2±0.1 1.2±0.1
1.5±0.3
1.2±0.1 C0.3
3.0
3.0 5.5
Dot marking
Sealing
Sealing
Tolerance ±0.3mm
in mm
: Input
: Output
: Ground
(1) (2)
(4) (3)
EIAJ
CODE
()
(1)
(2)
(3)(4)
Part Number
Nominal Center
Frequency (fn)
(kHz)
3dB
Bandwidth
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Spurious
Response
(dB)
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
CFWKA450KBFY001-R0
450.0 fn±11.5
min.
fn±13.0
min.
fn±30.0 max.
[within 50dB]
45 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point]
20 min.
[within 0.1 to 1.0MHz]
30.0 max.
[within fn±10kHz] 1000
For safety purposes, connect the output of fi lters to the IF amplifi er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
E1
Rg
S.S.G.
0dBm
R1
RF Voltmeter
Connection
(1): Input
(2): Output
(3)(4): Ground
(2)
(4)
(1)
R2 E2
(3)
Rg+R1=R2=Input/Output Impedance
c Test Circuit
P05E.pdf
Nov.24,2011
15
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
6
Attenuation (dB)
G.D.T. (μ sec.)
200
150
100
50
0
420 430 440 450 460 470 480
Frequency (kHz)
0
2
4
6
8
10
12
14
16
18
20
c Frequency Characteristics
Frequency (kHz)
Attenuation (dB)
200 300 400 500 600 700 800 900 1000
0
10
20
30
40
50
60
70
80
90
100
P05E.pdf
Nov.24,2011
16
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
6
kHz SMD Type CERAFILr Notice
Continued on the following page.
Filter is soldered twice within the following temperature
conditions.
1. Standard Reflow Soldering Conditions
2. Wash
(1) Reflow
Electrode is directly soldered with the tip of soldering iron
at +350±5°C for 3.0±0.5 seconds.
(2) Soldering Iron
Do not use strong acidity flux, more than 0.2wt% chlorine
content, in reflow soldering.
(3) Other
s)MMERSION7ASH
2 minutes max. in above solvent at +60°C max.
s3HOWEROR2INSE7ASH
2 minutes max. in above solvent at +60°C max.
CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA),
7ATER$EMINERALIZED7ATER#LEANING7ATER3OLUTION
(Cleanthrough-750H, Pine Alpha 100S), Silicon
4ECHNOCARE&27
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
(1) Cleaning Solvent
(2) Cleaning Conditions
s7HENCOMPONENTSAREIMMERSEDINSOLVENTBESURETO
maintain the temperature of components below the
temperature of solvent.
s0LEASEDONOTUSEULTRASONICCLEANING
s4OTALWASHINGTIMESHOULDBEMINUTESMAXIMUM
s0LEASEENSURETHECOMPONENTISTHOROUGHLYEVALUATEDIN
your application circuit.
s0LEASEDONOTUSECHLORINEPETROLEUMORALKALICLEANING
solvent.
s)FYOUPLANTOUSEANYOTHERTYPESOFSOLVENTSPLEASE
consult with Murata or Murata representative prior to
using.
(3) Notice
o Soldering and Mounting
0EAK
(260°C max.)
Heating
(230°C)
Gradual
Cooling
Pre-heating
(150-180°C)
100
230
260
Temperature (°C)
60-120 sec. SEC
max.
30 sec.
min.
120 sec.
min.
c SFPKA/CFUKG/CFUKF Series Notice
P05E.pdf
Nov.24,2011
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
kHz SMD Type CERAFILr Notice
o Storage and Operating Conditions
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. If the component is cleaned, please confirm that the
reliability has not been degraded.
2. The components, packed in a moisture-proof bag (dry
pack), are sensitive to moisture. The following treatment
is required before applying reflow soldering, to avoid
package cracks or reliability degradation caused by
thermal stress. When unpacked, store the component in
an atmosphere of below 25°C and below 65%R.H., and
solder within 48 hours.
3. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
1. Product Storage Condition
Please store the products in a room where the
temperature/humidity is stable, and avoid such places
where there are large temperature changes. Please store
the products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
Continued from the preceding page.
P05E.pdf
Nov.24,2011
18
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
kHz SMD Type CERAFILr Notice
Continued on the following page.
Filter is soldered twice within the following temperature
conditions.
1. Standard Reflow Soldering Conditions
(1) Reflow
Electrode is directly soldered with the tip of soldering iron
at +350±5°C for 3.0±0.5 seconds.
(2) Soldering Iron
Do not use strong acidity flux, more than 0.2wt% chlorine
content, in reflow soldering.
(3) Other
o Soldering and Mounting
Peak
(260°C max.)
Heating
(230°C)
Gradual
Cooling
Pre-heating
(150-180°C)
100
230
260
Temperature (°C)
60-120 sec. 40 sec.
max.
30 sec.
min.
120 sec.
min.
Do not clean or wash the component as it is not
hermetically sealed.
2. Wash
Do not apply conformal coating onto the component as
it's not hermetically sealed.
3. Coating
o Storage and Operating Conditions
1. Product Storage Condition
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to + 40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because the
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
c CFWKA Series Notice
P05E.pdf
Nov.24,2011
19
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
kHz SMD Type CERAFILr Notice
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid applying a
direct current to the output of ceramic filters.
Continued from the preceding page.
P05E.pdf
Nov.24,2011
20
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr MHz SMD Type SFECF10M7 Series
SFECF10M7 series for FM receivers are small,
high-performance and super thin (1.4mm max.) fi lters.
The piezoelectric element is sandwiched by the
ceramics substrate.
They have 1.4mm max. thickness and a small mounting
area (3.45x3.1mm).
SFECF series and CDSCB series (MHz Discriminator)
enable customers to make VICS/RKE/TPMS set very thin
and small.
c Features
1. The fi lters are mountable by automatic placers.
2. They are slim, at only 1.4mm max. thickness, and
have a small mounting area (3.45x3.1mm) enabling
fl exible PCB design.
3. Various bandwidths are available. Select a
suitable type in accordance with the desired
selectivity.
4. Operating Temperature Range:
-20 to +80 (°C)(Standard Type)
-40 to +85 (°C)(High-reliability Type)
Storage Temperature Range:
-40 to +85 (°C)(Standard Type)
-55 to +85 (°C)(High-reliability Type)
0.75±0.3
(in mm)
1.3±0.1
3.1±0.2
3.45±0.2
(0.6) (0.6) (0.6)
(1.28)
(1.28)
0 to 0.4
(6)
(1.28)(1.28)
0.65±0.3
0.85±0.3
0.85±0.3
0 to 0.35 0 to 0.35
0 to 0.4
(5) (4)
(1) (2) (3)
0.65±0.3
0.3 min.0.3 min.
: EIAJ Monthly Code
: Reference( )
(1): Input
(2)(5): Ground
(3)(4): No connect
(6): Output
0.7±0.3
Input electrode
marker
Standard Type
Part Number
Center
Frequency
(fo) (MHz)
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Ripple
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFECF10M7HA00-R0
10.700
±30kHz - 180 ±40kHz 470 max. 4.0±2.0dB 1.0 max. 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
SFECF10M7HF00-R0
- 10.700 fn±25 min. 510 max. 8.0max.
[at fn] 1.0 max. 30 min.
[within 9MHz to fn]
25 min.
[within fn to 12MHz] 330
SFECF10M7GA00-R0
10.700
±30kHz - 230 ±50kHz 510 max. 3.5±2.0dB 1.0 max. 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
SFECF10M7GF00-R0
- 10.700 fn±45 min. 560 max. 8.0max.
[at fn] 1.0 max. 30 min.
[within 9MHz to fn]
25 min.
[within fn to 12MHz] 330
SFECF10M7FA00-R0
10.700
±30kHz - 280 ±50kHz 590 max. 3.0±2.0dB 1.0 max. 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
SFECF10M7FF00-R0
- 10.700 fn±65 min. 620 max. 7.0max.
[at fn] 1.0 max. 30 min.
[within 9MHz to fn]
25 min.
[within fn to 12MHz] 330
SFECF10M7EA00-R0
10.700
±30kHz - 330 ±50kHz 700 max. 3.0±2.0dB 1.0 max. 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
SFECF10M7DA0001-R0
10.700
±30kHz - 420 min. 950 max. 3.0±2.0dB 3.0 max. 35 min.
[within 9MHz to fo]
25 min.
[within fo to 12MHz] 330
SFECF10M7DF00-R0
- 10.700 fn±150 min. 990 max. 6.0max.
[at fn] 3.0 max. 20 min.
[within 9MHz to fn]
20 min.
[within fn to 12MHz] 330
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W.
Center frequency (fo) defi ned by center of 3dB bandwidth.
For safety purposes, connect the output of fi lters to the IF amplifi er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
P05E.pdf
Nov.24,2011
21
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
7
High-reliability Type
Part Number
Center
Frequency
(fo) (MHz)
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Ripple
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFECF10M7HA00S0-R0
10.700
±30kHz - 180 ±40kHz 470 max. 4.0±2.0dB 1.0 max. 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
SFECF10M7HF00S0-R0
- 10.700 fn±25 min. 510 max. 8.0max.
[at fn] 1.0 max. 30 min.
[within 9MHz to fn]
25 min.
[within fn to 12MHz] 330
SFECF10M7GA00S0-R0
10.700
±30kHz - 230 ±50kHz 510 max. 3.5±2.0dB 1.0 max. 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
SFECF10M7GF00S0-R0
- 10.700 fn±45 min. 560 max. 8.0max.
[at fn] 1.0 max. 30 min.
[within 9MHz to fn]
25 min.
[within fn to 12MHz] 330
SFECF10M7FA00S0-R0
10.700
±30kHz - 280 ±50kHz 590 max. 3.0±2.0dB 1.0 max. 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
SFECF10M7FF00S0-R0
- 10.700 fn±65 min. 630 max. 7.0max.
[at fn] 1.0 max. 30 min.
[within 9MHz to fn]
25 min.
[within fn to 12MHz] 330
SFECF10M7EA00S0-R0
10.700
±30kHz - 330 ±50kHz 700 max. 3.0±2.0dB 1.0 max. 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
SFECF10M7DF00S0-R0
- 10.700 fn±145 min. 990 max. 6.0max.
[at fn] 3.0 max. 20 min.
[within 9MHz to fn]
20 min.
[within fn to 12MHz] 330
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W.
Center frequency (fo) defi ned by center of 3dB bandwidth.
For safety purposes, connect the output of fi lters to the IF amplifi er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
(1)
(2)
(3)
(6)
(5)
(4)
R2C2E2
RF
Voltmeter
R1
E1
S.S.G.
Rg
Rg = 50Ω R1 = 280Ω ±5% R2 = 330Ω ±5%
C2 = 10 ± 2 pF (Including stray capacitance and Input capacitance
of RF Volt Meter)
E1: S.S.G. Output Voltage
: Input
: Ground
: No connect
: Output
(1)
(2)(5)
(3)(4)
(6)
c Test Circuit
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Frequency (MHz)
Attenuation (dB)
10.300 10.500 10.700 10.900 11.100
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
c Frequency Characteristics
SFECF10M7FA00-R0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFECF10M7FA00-R0
P05E.pdf
Nov.24,2011
22
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
7
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr MHz SMD Type SFSCE10M7 Series
SFSCE series are chip surface mount fi lters available for
3dB bandwidth at 700kHz to 1.3MHz. (more than twice
width compared with current types)
They have 1.0mm max. thickness and small mounting area
(4.5x3.8mm).
c Features
1. The fi lters are mountable by automatic placers.
2. They are slim, at only 1.0mm max. thickness, and
have a small mounting area (4.5x3.8mm) enabling
fl exible PCB design.
3. Available lead (Pb) free solder refl ow.
4. Operating temperature range:
-20 to +80 (°C)
Storage temperature range:
-40 to +85 (°C)
c Applications
1. SS digital communication system
2. Digital wireless audio
3. PHS Evolution system
4. RFID Reader Writer
5. RKE
(3.5)
(in mm)
*
0.4
3.8(1.8)
4.5
(1) (2)
(4) (3)
(4.0)
1.0 max.0.85 0.150.3
(1)
(2)
(3)
(4)
Tolerance unless
otherwise specified: ±0.1
( )
: Input
: Output
: No Connect
: Ground
: EIAJ Monthly Code
: Reference
*
(2.25) 1.1
0.6
0.15
(4-R0.3)
(0.3)
(1)
(4)
(2)
(3)
Part Number
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
Stop
Bandwidth
(MHz)
Insertion Loss
(dB)
Ripple
(dB)
Spurious
Response
(dB)
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
SFSCE10M7WF03-R0
10.700 fn±500.0
min.
2.2 max. (Total)
[within 20dB]
6.0 max.
[at minimum loss point]
2.0 max.
[within 3dB Bandwidth]
30/25 min.
[within 5.7MHz to fn / fn to 15.7MHz]
0.6 max.
[within fn±400kHz] 470
SFSCE10M7WF04-R0
10.700 fn±400.0
min.
1.8 max. (Total)
[within 20dB]
6.0 max.
[at minimum loss point]
1.5 max.
[within 3dB Bandwidth]
35/25 min.
[within 5.7MHz to fn / fn to 15.7MHz]
0.6 max.
[within fn±325kHz] 470
SFSCE10M7WF05-R0
10.700 fn±325.0
min.
1.7 max. (Total)
[within 20dB]
6.0 max.
[at minimum loss point]
1.5 max.
[within 3dB Bandwidth]
40/30 min.
[within 5.7MHz to fn / fn to 15.7MHz]
0.6 max.
[within fn±250kHz] 470
For safety purposes, connect the output of fi lters to the IF amplifi er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
R1+Rg=R2=Input/Output Impedance, Rg=50Ω
C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)
E1: S.S.G. Output Voltage
(1): Input
(2): Output
(3): No Connect
(4): Ground
RF
Voltmeter
C2R2
R1
Rg
S.S.G.
(4)
(1)
(3)
(2)
c Test Circuit
P05E.pdf
Nov.24,2011
23
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
8
2.0
1.6
1.2
0.8
0.4
0.0
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
11.10010.3009.500 11.90011.50010.7009.900
0
2
4
6
8
10
c Frequency Characteristics
SFSCE10M7WF03-R0
Frequency (MHz)
6.700 8.700 10.700 12.700 14.700
Attenuation (dB)
0
20
40
60
80
SFSCE10M7WF03-R0
P05E.pdf
Nov.24,2011
24
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
8
MHz SMD Type CERAFILr Notice
Continued on the following page.
Filter is soldered twice within the following temperature
conditions.
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered at +350±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(2) Soldering Iron
The component is recommended with placement
machines that employ optical placement capabilities. The
component might be damaged by excessive mechanical
force. Please make sure that you have evaluated by
using placement machines before going into mass
production. Do not use placement machines that utilize
mechanical positioning. Please contact Murata for details
beforehand.
(3) Condition for Placement Machines
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. To prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated on positioning accuracy,
etc. Careful checking and maintenance are necessary
to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component. Depending on the soldering
conditions, the effective area of terminations may be
reduced. Solder containing Ag should be used to
prevent the electrode erosion.
(f) Do not use strong acidity flux, more than 0.2wt%
chlorine content, in reflow soldering.
(4) Other
o Soldering and Mounting
Temperature (°C)
100
230
260
30 sec.
min.
40 sec.
max.
Peak
(260°C max.)
Pre-heating
(150-180°C)
Heating
(230°C)
Gradual
Cooling
120 sec.
min.
60-120 sec.
[Component Direction]
[Component Layout Close to Board]
Place the
component
lateral to the
direction in
which stress
acts.
Susceptibility to
stress is in the order
of : A>C>B
B
AC
Slit
Perforation
c SFECF10M7 Series Notice
P05E.pdf
Nov.24,2011
25
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
MHz SMD Type CERAFILr Notice
o Storage and Operating Conditions
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
2. The components, packed in a moisture proof bag (dry
pack), are sensitive to moisture. The following treatment
is required before applying reflow soldering, to avoid
reliability degradation caused by thermal stress. When
unpacked, store the component in an atmosphere of
reflow 30°C and below 60%R.H., and solder within 1
week.
3. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
1. Product Storage Condition
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
Continued from the preceding page.
Do not clean or wash the component as it is not
hermetically sealed.
2. Wash
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
3. Coating
P05E.pdf
Nov.24,2011
26
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
MHz SMD Type CERAFILr Notice
Continued on the following page.
Filter is soldered twice within the following temperature
conditions.
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered at +280±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(2) Soldering Iron
The component is recommended with placement
machines that employ optical placement capabilities. The
component might be damaged by excessive mechanical
force. Please make sure that you have evaluated by
using placement machines before going into mass
production. Do not use placement machines that utilize
mechanical positioning. Please contact Murata for details
beforehand.
(3) Condition for Placement Machines
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. To prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated on positioning accuracy,
etc. Careful checking and maintenance are necessary
to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component.
(f) Do not use strong acidity flux, more than 0.2wt%
chlorine content, in reflow soldering.
(4) Other
o Soldering and Mounting
Peak
(240°C max.)
Heating
(230°C)
Gradual
Cooling
Pre-heating
(150-180°C)
100
230
240
Temperature (°C)
60-120 sec. 30 sec.
max.
30 sec.
min.
120 sec.
min.
[Component Direction]
Place the compon-
ent laterally to the
direction in which
stress acts.
[Component Layout Close to Board]
Susceptibility to
stress is in the order
of : A>C>B
B
AC
Slit
Perforation
c SFSCE10M7WF03-R0 Notice
P05E.pdf
Nov.24,2011
27
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
MHz SMD Type CERAFILr Notice
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
2. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
Continued from the preceding page.
Do not clean or wash the component as it is not
hermetically sealed.
2. Wash
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
3. Coating
o Storage and Operating Conditions
1. Product Storage Condition
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to + 40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
P05E.pdf
Nov.24,2011
28
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
MHz SMD Type CERAFILr Notice
Continued on the following page.
Filter is soldered twice within the following temperature
conditions.
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered at +280±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(2) Soldering Iron
The component is recommended with placement
machines that employ optical placement capabilities. The
component might be damaged by excessive mechanical
force. Please make sure that you have evaluated by
using placement machines before going into mass
production. Do not use placement machines that utilize
mechanical positioning. Please contact Murata for details
beforehand.
(3) Condition for Placement Machines
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. To prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated on positioning accuracy,
etc. Careful checking and maintenance are necessary
to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component.
(f) Do not use strong acidity flux, more than 0.2wt%
chlorine content, in reflow soldering.
(4) Other
o Soldering and Mounting
[Component Direction]
Place the compon-
ent laterally to the
direction in which
stress acts.
[Component Layout Close to Board]
Susceptibility to
stress is in the order
of : A>C>B
B
AC
Slit
Perforation
Peak
(260°C max.)
Heating
(230°C)
Gradual
Cooling
Pre-heating
(150-180°C)
100
230
260
Temperature (°C)
60-120 sec. 40 sec.
max.
30 sec.
min.
120 sec.
min.
c SFSCE10M7WF04/05-R0 Notice
P05E.pdf
Nov.24,2011
29
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
MHz SMD Type CERAFILr Notice
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
2. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
Continued from the preceding page.
Do not clean or wash the component as it is not
hermetically sealed.
2. Wash
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
3. Coating
o Storage and Operating Conditions
1. Product Storage Condition
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to + 40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
P05E.pdf
Nov.24,2011
30
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
SMD Type CERAFILr Standard Land Pattern Dimensions
(in mm)
2.02.475
6.95
1.61.55 7.45 0.80.9
0.925 2.0 2.0
1.1
c SFPKA Series
(in mm)
1.2
0.7 0.7
1.4 1.2
2.03.52.0
c CFUKG/CFUKF Series
(in mm)
1.2
3.0
3.0 5.5
4-R3.0
11.5
7.5
6.5
1.6
2.1
1.8
0.5
c CFWKA Series
Input
Ground
No connect
Output
(1):
(2)(5):
(3)(4):
(6):
(in mm)
It shows solder resist land pattern.
1.051.401.05
0.10.10.10.1
0.8 0.6 0.8 0.6 0.8
0.1
0.1
0.3
0.3
0.3
(6) (5) (4)
(1) (2) (3)
c SFECF10M7 Series
(in mm)
It shows solder resist land pattern.
(1): Input
(2): Output
(3): No Connect
(4): Ground
0.5
0.5
1.4
0.1 0.1
0.1
1.05
(3) (4)
(2) (1)
0.81.15 1.3
c SFSCE10M Series
P05E.pdf
Nov.24,2011
31
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
kHz SMD Type CERAFILr Packaging
Part Number ø180mm
450
450
350
ø330mm
1,000SFPKA
CFUKG
CFUKF
CFWKA
c Minimum Quantity
Dimensions of Carrier Tape
User direction of feed
12.0±0.1
16.0±0.2
8.8±0.1
7.5±0.1 1.75±0.1
4.0±0.1
2.0±0.1
5.3±0.1
ø1.5
7.4±0.1
+0.1
-0
Cover film
(in mm)
Dimensions of Reel
Label
ø13.0±0.2
2.2±0.5
21.5±1.0
330±2
80±1
240 to 280
400 to 560
160 to 190
17.5±0.5
EmptyComponents
Cover film
Empty
Trailer Leader
s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP
c SFPKA Series
+1.0
-0
+0
-3.0
Dimensions of Carrier Tape Dimensions of Reel
(in mm)
Leader
Cover film
Empty EmptyComponents
Trailer
160 to 190
160 to 200
400 to 560
(ø60 )
(ø180 )
17.0±1.0
19.4±0.3
ø13.0±0.5
2.0±0.2
s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP
5SERDIRECTIONOFFEED
Cover film
+0.1
-0.0
4.0±0.1
7.5±0.1 1.75±0.1
6.76±0.1
16.0±0.2
8.1±0.1
4.2±0.1
7.7±0.1
8.0±0.1
6.7±0.1
6.3±0.1
2.0±0.1
ø1.5
c CFUKG/CFUKF Series
Continued on the following page.
P05E.pdf
Nov.24,2011
32
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
kHz SMD Type CERAFILr Packaging
Continued from the preceding page.
Dimensions of Carrier Tape Dimensions of Reel
(in mm)
User direction of feed
+0.1
-0.0
4.0±0.1
11.5±0.1 1.75±0.1
24.0±0.3
12.4±0.1
3.2±0.1
0.4±0.1
12.0±0.1
12.0±0.1
2.0±0.1
ø1.5
Cover film
8.1±0.1
7.7±0.1
(ø62.0±1.0)
(ø178±2.0)
25.5±1.0
29.9±1.0
Leader
Cover film
Empty EmptyComponents
Trailer
160 to 190
240 to 280
400 to 560
ø13.0±0.5
2.0±0.2
s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP
c CFWKA Series
P05E.pdf
Nov.24,2011
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
MHz SMD Type CERAFILr Packaging
Part Number ø180mm
2,000
1,500
SFECF
SFSCE
c Minimum Quantity
( ): Reference
(in mm)
Dimensions of Carrier Tape Dimensions of Reel
ø13.0±0.5
2.0±0.5
240 to 280
400 to 560
160 to 190
Empty
Components
Cover film
Empty
Trailer Leader
17.0±1.0
+1.0
-0
13.0
+0
-1.5
180
+1.0
-0
60
Chip filter
ø1.55±0.05
User direction of feed
Cover film
Peeling strength
(0.1 to 0.7N)
0.3±0.05
1.84±0.1
(0.05)
(3°)
10° max.
5.5±0.05
4.1±0.1
1.75±0.1
3° max.
4.1±0.1
4.0±0.1
2.0±0.05
4.0±0.1
3.35
12.0±0.2
+0.1
-0.05
s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP
c SFECF10M7 Series
(in mm)
Dimensions of Carrier Tape Dimensions of Reel
s0ART.UMBERMARKEDSIDEISALWAYSFACINGUP
±
±
±
±
±
±
(3°)
±
±
± MAX
±
±
5SERDIRECTIONOFFEED
± MAX
Cover film
0EELINGSTRENGTH
TO.
±
±
±
TO
TO
TO
%MPTY
#OMPONENTS
Cover film
%MPTY
Trailer ,EADER
±
c SFSCE10M7 Series
P05E.pdf
Nov.24,2011
34
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case General Use CFULA Series
CFULA series are high selectivity ceramic fi lters,
which consist of 4 ceramic elements connected in a
ladder form.
They are most suitable for digital communications
and cellular phones because of their improved GDT
characteristics.
c Features
1. High selectivity
2. A variety of bandwidths available
3. Excellent GDT characteristics are available within
pass bandwidth.
4. Easily mounted on a printed circuit board
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
3.0±0.3 7.0±0.3
4.2±0.3 7.3±0.3
0.8±0.1
0.6±0.1
1.2±0.5
8.0±0.3
MARKING
EIAJ
CODE
3.3±0.5
2.7±0.3
(1)(2)
(3)
0.3±0.1
1.5 max.
0.15±0.05
Connection
(1): Input
(2): Ground
(3): Output
(in mm)
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Input/Output
Impedance
(ohm)
CFULA455KB2A-B0 455
±2.0kHz
fn±15.0
min.
fn±30.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point] 1500
CFULA455KC2A-B0 455
±2.0kHz
fn±12.5
min.
fn±24.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point] 1500
CFULA455KD4A-B0 455
±1.5kHz
fn±10.0
min.
fn±20.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point] 1500
CFULA455KE4A-B0 455
±1.5kHz
fn±7.5
min.
fn±15.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point] 1500
CFULA455KF4A-B0 455
±1.5kHz
fn±6.0
min.
fn±12.5 max.
[within 40dB]
27 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point] 2000
CFULA455KG1A-B0 455
±1.0kHz
fn±4.5
min.
fn±10.0 max.
[within 40dB]
25 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point] 2000
CFULA455KH1A-B0 455
±1.0kHz
fn±3.0
min.
fn±9.0 max.
[within 40dB]
35 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point] 2000
Center frequency (fo) defi ned by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of fi lters to the IF amplifi er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
E1
R1
Rg
S.S.G.
0dBm
R2 E2 RF Voltmeter
Connection
(1): Input
(2): Ground
(3): Output
(1) (2)
(3)
Rg+R1=R2=Input/Output Impedance
c Test Circuit
P05E.pdf
Nov.24,2011
35
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
9
100
40
30
20
10
0
Attenuation (dB)
0
50
100
150
200
G.D.T. (μsec.)
430 455 480
Frequency (kHz)
90
80
70
60
50
c Frequency Characteristics
CFULA455KE4A-B0
100
40
30
20
10
0
Attenuation (dB)
200
Frequency (kHz)
90
80
70
60
50
300 400 500 600 700 800 900 1000
CFULA455KE4A-B0
P05E.pdf
Nov.24,2011
36
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
9
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case General Use CFWLA Series
Ceramic fi lter CFWLA series are low profi le high
selectivity ceramic fi lters, which use 6 elements in
ladder form.
They are best suitable to high-class transceivers,
cordless telephones and amateur radios.
c Features
1. Low profi le, high selectivity
2. Available bandwidths are B to J as standard
3. Easily mountable on any PC board
4. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
4.3±0.3
0.15
1.5 max.
2.3±0.5 2.0±0.3
2.9±0.3
11.0±0.5
MARKING
EIAJ
CODE
1.2±0.5
(1)(2)
(4) (3)
(5)
1.35±0.5
7.0±0.5
3.5±0.5
0.6±0.1
0.8±0.1
7.5±0.5
2.6±0.3
Connection
(1): Input
(2)(3)(4): Ground
(5): Output
(in mm)
2.9—0.3
2.9±0.3
Part Number
Nominal Center
Frequency (fn)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Ripple
(dB)
Input/Output
Impedance
(ohm)
CFWLA455KBFA-B0 455.0 fn±15.0
min.
fn±30.0 max.
[within 50dB]
35 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point]
3.0 max.
[within fn±10kHz] 1500
CFWLA455KCFA-B0 455.0 fn±12.5
min.
fn±24.0 max.
[within 50dB]
35 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point]
3.0 max.
[within fn±8kHz] 1500
CFWLA455KDFA-B0 455.0 fn±10.0
min.
fn±20.0 max.
[within 50dB]
35 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point]
3.0 max.
[within fn±7kHz] 1500
CFWLA455KEFA-B0 455.0 fn±7.5
min.
fn±15.0 max.
[within 50dB]
35 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
3.0 max.
[within fn±5kHz] 1500
CFWLA455KFFA-B0 455.0 fn±6.0
min.
fn±12.5 max.
[within 50dB]
35 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
3.0 max.
[within fn±4kHz] 2000
CFWLA455KGFA-B0 455.0 fn±4.5
min.
fn±10.0 max.
[within 50dB]
35 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
2.0 max.
[within fn±3kHz] 2000
CFWLA455KHFA-B0 455.0 fn±3.0
min.
fn±9.0 max.
[within 50dB]
60 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
2.0 max.
[within fn±2kHz] 2000
CFWLA455KJFA-B0 455.0 fn±2.0
min.
fn±7.5 max.
[within 50dB]
60 min.
[within fn±100kHz]
7.0 max.
[at minimum loss point]
2.0 max.
[within fn±1.5kHz] 2000
For safety purposes, connect the output of fi lters to the IF amplifi er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
E1
R1
R2 E2 RF Voltmeter
Connection
(1): Input
(5): Output
(2)(3)(4): Ground
Rg
S.S.G.
0dBm
(1) (2) (3) (4)
(5)
Rg+R1=R2=Input/Output Impedance
c Test Circuit
P05E.pdf
Nov.24,2011
37
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
10
100
40
30
20
10
0
Attenuation (dB)
0
100
200
300
400
G.D.T. (μsec.)
430 455 480
Frequency (kHz)
90
80
70
60
50
c Frequency Characteristics
CFWLA455KEFA-B0
100
40
30
20
10
0
Attenuation (dB)
200
Frequency (kHz)
90
80
70
60
50
300 400 500 600 700 800 900 1000
CFWLA455KEFA-B0
P05E.pdf
Nov.24,2011
38
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
10
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case Miniaturized Type CFULB Series
CFULB series ceramic fi lters are miniature, high-
performance ceramic fi lters composed of piezoelectric
elements connected in a ladder form.
These fi lters, only 6.3mm high, are 65% the
volume of conventional types.
They are well suited for miniaturizing various kinds
of communications equipment, pocket pagers, car
radios, cordless telephones and mobile telephones.
c Features
1. Miniature and high selectivity
2. A variety of bandwidths are available
3. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
4.3±0.3
1.0 max.
1.8±0.3
2.4±0.3
6.5±0.3
0.8±0.3
1.0
±
0.3
6.3±0.3 6.5±0.3
0.5±0.1
0.7±0.1
3.5±0.3
0.7±0.3
(1) (2)
(3) (4)
0.15±0.05
Connection
(1): Input
(2): Output
(3) : Ground
(4)
(in mm)
}
MARKING
EIAJ
CODE
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Input/Output
Impedance
(ohm)
CFULB455KB2A-B0 455
±2.0kHz
fn±15.0
min.
fn±30.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point] 1500
CFULB455KC2A-B0 455
±2.0kHz
fn±12.5
min.
fn±24.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point] 1500
CFULB455KD4A-B0 455
±1.5kHz
fn±10.0
min.
fn±20.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point] 1500
CFULB455KE4A-B0 455
±1.5kHz
fn±7.5
min.
fn±15.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point] 1500
CFULB455KF4A-B0 455
±1.5kHz
fn±6.0
min.
fn±12.5 max.
[within 40dB]
27 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point] 2000
CFULB455KG1A-B0 455
±1.0kHz
fn±4.5
min.
fn±10.0 max.
[within 40dB]
25 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point] 2000
CFULB455KH1A-B0 455
±1.0kHz
fn±3.0
min.
fn±9.0 max.
[within 40dB]
35 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point] 2000
CFULB455KJ1A-B0 455
±1.0kHz
fn±2.0
min.
fn±7.5 max.
[within 40dB]
35 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point] 2000
Center frequency (fo) defi ned by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
CFULB455K_series fi lters are 4-element ceramic fi lters and miniature versions of CFULA455K_series.
For safety purposes, connect the output of fi lters to the IF amplifi er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
E1
R1
Rg
S.S.G.
0dBm
R2 E2 RF Voltmeter
Connection
(1)
(2)
(3)(4)
: Input
: Output
: Ground
(1) (2)
(3) (4)
Rg+R1=R2=Input/Output Impedance
c Test Circuit
P05E.pdf
Nov.24,2011
39
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
11
100
40
30
20
10
0
Attenuation (dB)
0
50
100
150
200
G.D.T. (μsec.)
430 455 480
Frequency (kHz)
90
80
70
60
50
c Frequency Characteristics
CFULB455KE4A-B0
100
40
30
20
10
0
Attenuation (dB)
200
Frequency (kHz)
90
80
70
60
50
300 400 500 600 700 800 900 1000
CFULB455KE4A-B0
P05E.pdf
Nov.24,2011
40
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
11
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case Miniaturized Type CFWLB Series
CFWLB series ceramic fi lters are miniature, high-
performance ceramic fi lters composed of piezoelectric
elements connected in a ladder form.
These fi lters, only 6.3mm high, are 67% the volume
of conventional types.
They are well suited for miniaturizing various kinds
of communications equipment, pocket pagers, pagers,
car radios, cordless telephones and mobile telephones.
c Features
1. Miniature and high selectivity
2. A variety of bandwidths are available.
3. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
4.3±0.3
1.0 max.
2.7±0.3
2.5±0.3
9.5±0.3
0.7±0.3
1.0±0.3 6.3±0.3 6.5±0.3
0.5±0.1
0.7±0.1
3.5±0.3
0.9±0.3
0.15±0.05
(1)
(3) (4)
(2)
(5)
2.8±0.3
Connection
(1): Input
(2): Output
(3)
(4) : Ground
(5)
(in mm)
}
MARKING
EIAJ
CODE
Part Number
Nominal Center
Frequency (fn)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Input/Output
Impedance
(ohm)
CFWLB455KBFA-B0 455.0 fn±15.0
min.
fn±30.0 max.
[within 50dB]
35 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point] 1500
CFWLB455KCFA-B0 455.0 fn±12.5
min.
fn±24.0 max.
[within 50dB]
35 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point] 1500
CFWLB455KDFA-B0 455.0 fn±10.0
min.
fn±20.0 max.
[within 50dB]
35 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point] 1500
CFWLB455KEFA-B0 455.0 fn±7.5
min.
fn±15.0 max.
[within 50dB]
35 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point] 1500
CFWLB455KEFA004-B0 455.0 fn±7.5
min.
fn±15.0 max.
[within 60dB]
60 min.
[within fn±15kHz to 30kHz]
5.0 max.
[at fn] 1500
CFWLB455KFFA-B0 455.0 fn±6.0
min.
fn±12.5 max.
[within 50dB]
35 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point] 2000
CFWLB455KGFA-B0 455.0 fn±4.5
min.
fn±10.0 max.
[within 50dB]
35 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point] 2000
CFWLB455KHFA-B0 455.0 fn±3.0
min.
fn±9.0 max.
[within 50dB]
55 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point] 2000
CFWLB455KJFA-B0 455.0 fn±2.0
min.
fn±7.0 max.
[within 50dB]
55 min.
[within fn±100kHz]
7.0 max.
[at minimum loss point] 2000
CFWLB455K_series fi lters are 4-element ceramic fi lters and miniature versions of CFWLA455K_series.
For safety purposes, connect the output of fi lters to the IF amplifi er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
P05E.pdf
Nov.24,2011
41
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
12
(1) (2)
(3) (4) (5)
R1
R2 E2E1
Rg
S.S.G.
0dBm
RF Voltmeter
Connection
(1)
(2)
(3)(4)(5)
: Input
: Output
: Ground
Rg+R1=R2=Input/Output Impedance
c Test Circuit
100
40
30
20
10
0
Attenuation (dB)
0
50
100
200
G.D.T. (μsec.)
430 455 480
Frequency (kHz)
90
80
70
60
50
150
c Frequency Characteristics
CFWLB455KEFA-B0
100
40
30
20
10
0
Attenuation (dB)
200
Frequency (kHz)
90
80
70
60
50
300 400 500 600 700 800 900 1000
CFWLB455KEFA-B0
P05E.pdf
Nov.24,2011
42
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
12
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case Group Delay Flat Type CFULA_Y Series
CFULA_Y series are high selectivity ceramic fi lters,
which consist of 4 ceramic elements connected in a
ladder form.
They are most suitable for digital communications
and cellular phones because of their improved GDT
characteristics.
c Features
1. High selectivity
2. A variety of bandwidths are available.
3. Excellent GDT characteristics are available within
pass bandwidth.
4. Easily mounted on a printed circuit board
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
3.0±0.3 7.0±0.3
4.2±0.3 7.3±0.3
0.8±0.1
0.6±0.1
1.2±0.5
8.0±0.3
MARKING
EIAJ
CODE
3.3±0.5
2.7±0.3
(1)(2)
(3)
0.3±0.1
1.5 max.
0.15±0.05
Connection
(1): Input
(2): Ground
(3): Output
(in mm)
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
CFULA455KB4Y-B0 455
±1.5kHz
fn±15.0
min.
fn±35.0 max.
[within 40dB]
25 min.
[within fn±100kHz]
5.0 max.
[at minimum loss point]
15.0 max.
[within fn±10kHz] 1500
CFULA455KC4Y-B0 455
±1.5kHz
fn±12.5
min.
fn±30.0 max.
[within 40dB]
25 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
15.0 max.
[within fn±8kHz] 1500
CFULA455KD1Y-B0 455
±1.0kHz
fn±10.0
min.
fn±25.0 max.
[within 40dB]
23 min.
[within fn±100kHz]
7.0 max.
[at minimum loss point]
20.0 max.
[within fn±7kHz] 1500
CFULA455KE1Y-B0 455
±1.0kHz
fn±7.5
min.
fn±20.0 max.
[within 40dB]
23 min.
[within fn±100kHz]
8.0 max.
[at minimum loss point]
20.0 max.
[within fn±5kHz] 1500
CFULA455KF1Y-B0 455
±1.0kHz
fn±6.0
min.
fn±17.5 max.
[within 40dB]
23 min.
[within fn±100kHz]
9.0 max.
[at minimum loss point]
20.0 max.
[within fn±4kHz] 2000
CFULA455KG1Y-B0 455
±1.0kHz
fn±4.5
min.
fn±15.0 max.
[within 40dB]
23 min.
[within fn±100kHz]
10.0 max.
[at minimum loss point]
20.0 max.
[within fn±3kHz] 2000
Center frequency (fo) defi ned by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of fi lters to the IF amplifi er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
E1
R1
Rg
S.S.G.
0dBm
R2 E2 RF Voltmeter
Connection
(1): Input
(2): Ground
(3): Output
(1) (2)
(3)
Rg+R1=R2=Input/Output Impedance
c Test Circuit
P05E.pdf
Nov.24,2011
43
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
13
Attenuation (dB)
Frequency (kHz)
Group Delay Time (μsec)
430 455 480
10
20
30
40
50
60
70
80
90
100
200
150
100
50
0
0
c Frequency Characteristics
CFULA455KE1Y-B0
200 300 400 500 600 700 800 900 1000
10
20
30
40
50
60
70
80
90
Attenuation (dB)
Frequency (kHz)
0
100
CFULA455KE1Y-B0
P05E.pdf
Nov.24,2011
44
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
13
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case Group Delay Flat Type CFWLA_Y Series
CFWLA_Y series are high selectivity ceramic fi lters,
which consist of 6 ceramic elements connected in a
ladder form.
They are most suitable for digital communications
and mobile telephones because of their improved
GDT characteristics.
c Features
1. High selectivity
2. A variety of bandwidths are available
3. Excellent GDT characteristics are available within
pass bandwidth.
4. Easily mounted on a printed circuit board
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
4.3±0.3
0.15
1.5 max.
2.3±0.5 2.0±0.3
2.9±0.3
11.0±0.5
MARKING
EIAJ
CODE
1.2±0.5
(1)(2)
(4) (3)
(5)
1.35±0.5
7.0±0.5
3.5±0.5
0.6±0.1
0.8±0.1
7.5±0.5
2.6±0.3
Connection
(1): Input
(2)(3)(4): Ground
(5): Output
(in mm)
2.9—0.3
2.9±0.3
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
CFWLA455KB4Y-B0 455
±1.5kHz
fn±15.0
min.
fn±30.0 max.
[within 50dB]
40 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
30.0 max.
[within fn±10kHz] 1500
CFWLA455KC4Y-B0 455
±1.5kHz
fn±12.5
min.
fn±27.5 max.
[within 50dB]
40 min.
[within fn±100kHz]
7.0 max.
[at minimum loss point]
30.0 max.
[within fn±8kHz] 1500
CFWLA455KD1Y-B0 455
±1.0kHz
fn±10.0
min.
fn±25.0 max.
[within 50dB]
40 min.
[within fn±100kHz]
8.0 max.
[at minimum loss point]
30.0 max.
[within fn±7kHz] 1500
CFWLA455KE1Y-B0 455
±1.0kHz
fn±7.5
min.
fn±20.0 max.
[within 50dB]
40 min.
[within fn±100kHz]
9.0 max.
[at minimum loss point]
30.0 max.
[within fn±5kHz] 1500
CFWLA455KF1Y-B0 455
±1.0kHz
fn±6.0
min.
fn±17.5 max.
[within 50dB]
40 min.
[within fn±100kHz]
10.0 max.
[at minimum loss point]
40.0 max.
[within fn±4kHz] 2000
CFWLA455KG1Y-B0 455
±1.0kHz
fn±4.5
min.
fn±15.0 max.
[within 50dB]
40 min.
[within fn±100kHz]
11.0 max.
[at minimum loss point]
40.0 max.
[within fn±3kHz] 2000
Center frequency (fo) defi ned by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of fi lters to the IF amplifi er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
E1
R1
R2 E2 RF Voltmeter
Connection
(1): Input
(5): Output
(2)(3)(4): Ground
Rg
S.S.G.
0dBm
(1) (2) (3) (4)
(5)
Rg+R1=R2=Input/Output Impedance
c Test Circuit
P05E.pdf
Nov.24,2011
45
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
14
Attenuation (dB)
430 455 480
Frequency (kHz)
10
20
30
40
50
60
70
80
90
100
400
300
200
100
0
Group Delay Time (μsec)
0
c Frequency Characteristics
CFWLA455KE1Y-B0
200 300 400 500 600 700 800 900 1000
10
20
30
40
50
60
70
80
90
Attenuation (dB)
Frequency (kHz)
0
100
CFWLA455KE1Y-B0
P05E.pdf
Nov.24,2011
46
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
14
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case Group Delay Flat Type Miniaturized Type CFULB_Y Series
Ceramic fi lter CFULB_Y series are miniature and high-
performance fi lters. These fi lters, only 6.3mm
high, are 65% the volume of conventional types.
Well suited for miniaturizing communications
equipment, especially for a cellular phone.
c Features
1. Miniature, fl at GDT characteristics
2. Suitable for a cellular phone
3. A variety of bandwidths are available.
4. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
4.3±0.3
1.0 max.
1.8±0.3
2.4±0.3
6.5±0.3
0.8±0.3
1.0
±
0.3
6.3±0.3 6.5±0.3
0.5±0.1
0.7±0.1
3.5±0.3
0.7±0.3
(1) (2)
(3) (4)
0.15±0.05
Connection
(1): Input
(2): Output
(3) : Ground
(4)
(in mm)
}
MARKING
EIAJ
CODE
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
CFULB455KB4Y-B0 455
±1.5kHz
fn±15.0
min.
fn±35.0 max.
[within 40dB]
25 min.
[within fn±100kHz]
5.0 max.
[at minimum loss point]
15.0 max.
[within fn±10kHz] 1500
CFULB455KC4Y-B0 455
±1.5kHz
fn±12.5
min.
fn±30.0 max.
[within 40dB]
25 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
15.0 max.
[within fn±8kHz] 1500
CFULB455KD1Y-B0 455
±1.0kHz
fn±10.0
min.
fn±25.0 max.
[within 40dB]
23 min.
[within fn±100kHz]
7.0 max.
[at minimum loss point]
20.0 max.
[within fn±7kHz] 1500
CFULB455KE1Y-B0 455
±1.0kHz
fn±7.5
min.
fn±20.0 max.
[within 40dB]
23 min.
[within fn±100kHz]
8.0 max.
[at minimum loss point]
20.0 max.
[within fn±5kHz] 1500
CFULB455KF1Y-B0 455
±1.0kHz
fn±6.0
min.
fn±17.5 max.
[within 40dB]
23 min.
[within fn±100kHz]
9.0 max.
[at minimum loss point]
20.0 max.
[within fn±4kHz] 2000
CFULB455KG1Y-B0 455
±1.0kHz
fn±4.5
min.
fn±15.0 max.
[within 40dB]
23 min.
[within fn±100kHz]
10.0 max.
[at minimum loss point]
20.0 max.
[within fn±3kHz] 2000
Center frequency (fo) defi ned by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
CFULB455K_Y series fi lters are 4-element ceramic fi lters and miniature versions of CFULA455K_Y series.
For safety purposes, connect the output of fi lters to the IF amplifi er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
E1
R1
Rg
S.S.G.
0dBm
R2 E2 RF Voltmeter
Connection
(1)
(2)
(3)(4)
: Input
: Output
: Ground
(1) (2)
(3) (4)
Rg+R1=R2=Input/Output Impedance
c Test Circuit
P05E.pdf
Nov.24,2011
47
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
15
Attenuation (dB)
Frequency (kHz)
Group Delay Time (μsec)
430 455 480
10
20
30
40
50
60
70
80
90
100
200
150
100
50
0
0
c Frequency Characteristics
CFULB455KE1Y-B0
200 300 400 500 600 700 800 900 1000
10
20
30
40
50
60
70
80
90
Attenuation (dB)
Frequency (kHz)
0
100
CFULB455KE1Y-B0
P05E.pdf
Nov.24,2011
48
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
15
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case Group Delay Flat Type CFWLB_Y Series
Ceramic fi lter CFWLB_Y series are miniature and
high-performance fi lters. These fi lters, only
6.3mm high, are 67% the volume of conventional types.
Well suited for miniaturizing communications
equipment, especially for a cellular phone.
c Features
1. Miniature, fl at GDT characteristics
2. Suitable for a cellular phone
3. A variety of bandwidths are available.
4. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
4.3±0.3
1.0 max.
2.7±0.3
2.5±0.3
9.5±0.3
0.7±0.3
1.0±0.3 6.3±0.3 6.5±0.3
0.5±0.1
0.7±0.1
3.5±0.3
0.9±0.3
0.15±0.05
(1)
(3) (4)
(2)
(5)
2.8±0.3
Connection
(1): Input
(2): Output
(3)
(4) : Ground
(5)
(in mm)
}
MARKING
EIAJ
CODE
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
CFWLB455KB4Y-B0 455
±1.5kHz
fn±15.0
min.
fn±30.0 max.
[within 50dB]
40 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
30.0 max.
[within fn±10kHz] 1500
CFWLB455KC4Y-B0 455
±1.5kHz
fn±12.5
min.
fn±27.5 max.
[within 50dB]
40 min.
[within fn±100kHz]
7.0 max.
[at minimum loss point]
30.0 max.
[within fn±8kHz] 1500
CFWLB455KD1Y-B0 455
±1.0kHz
fn±10.0
min.
fn±25.0 max.
[within 50dB]
40 min.
[within fn±100kHz]
8.0 max.
[at minimum loss point]
30.0 max.
[within fn±7kHz] 1500
CFWLB455KE1Y-B0 455
±1.0kHz
fn±7.5
min.
fn±20.0 max.
[within 50dB]
40 min.
[within fn±100kHz]
9.0 max.
[at minimum loss point]
30.0 max.
[within fn±5kHz] 1500
CFWLB455KF1Y-B0 455
±1.0kHz
fn±6.0
min.
fn±17.5 max.
[within 50dB]
35 min.
[within fn±100kHz]
10.0 max.
[at minimum loss point]
40.0 max.
[within fn±4kHz] 2000
CFWLB455KG1Y-B0 455
±1.0kHz
fn±4.5
min.
fn±15.0 max.
[within 50dB]
40 min.
[within fn±100kHz]
11.0 max.
[at minimum loss point]
40.0 max.
[within fn±3kHz] 2000
Center frequency (fo) defi ned by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
CFWLB455K_Y series fi lters are 4-element ceramic fi lters and miniature versions of CFWLA455K_Y series.
For safety purposes, connect the output of fi lters to the IF amplifi er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
(1) (2)
(3) (4) (5)
R1
R2 E2E1
Rg
S.S.G.
0dBm
RF Voltmeter
Connection
(1)
(2)
(3)(4)(5)
: Input
: Output
: Ground
Rg+R1=R2=Input/Output Impedance
c Test Circuit
P05E.pdf
Nov.24,2011
49
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
16
Attenuation (dB)
430 455 480
Frequency (kHz)
10
20
30
40
50
60
70
80
90
100
200
150
100
50
0
Group Delay Time (μsec)
0
c Frequency Characteristics
CFWLB455KE1Y-B0
200 300 400 500 600 700 800 900 1000
10
20
30
40
50
60
70
80
90
Attenuation (dB)
Frequency (kHz)
0
100
CFWLB455KE1Y-B0
P05E.pdf
Nov.24,2011
50
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
16
Plastic Case Type CERAFILr Minimum Quantity/Notice
Part Number Bulk
200
250
150
150
CFULA Series
CFULB Series
CFWLA Series
CFWLB Series
(pcs.)
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
c Minimum Quantity
o Storage and Operating Conditions
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Soldering and Mounting
The component cannot withstand washing.
o Handling
1. Do not use this product with bend. The component may
be damaged if excessive mechanical stress is applied to
it mounted on the printed circuit board.
2. All kinds of reflow soldering must not be applied on the
component.
3. Do not clean or wash the component as it is not
hermetically sealed.
4. Do not use strong acidity flux, more than 0.2wt% chlorine
content, in flow soldering.
5. Conformal coating of the component is not acceptable
due to non-sealed construction.
6. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
7. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
1. Product Storage Condition
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
c Notice
P05E.pdf
Nov.24,2011
51
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
Ceramic Discriminators for Communications Equipment
kHz Type Ceramic Discriminators
Ceramic discriminator consists of a wide band
piezoelectric resonator.
It is ideal for mobile communications equipment due to
its small size and light weight.
Standard line includes products for a wide range of
applications, from cordless telecom to cellular
telephone. Practically adjustment free at the detection
circuit, small size is suitable for downsizing.
c Features
1. Small in size and light weight
2. Adjustment free at detection circuit
3. High sensitivity and stability
4. Wide range of standard products are available for
various ICs.
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
MARKING
EIAJ
CODE
6.6±0.3
1.5±0.3
6.0±0.2
1.15±0.2
1.0±0.1
3.7±0.2
3.1 max.
6.2±0.2
(in mm)
CDBKB Series
(in mm)
MARKING
EIAJ
CODE
0.6±0.2
1.8±0.2
6.3 max.
4.2±0.2
6.0±0.2
0.5±0.1 0.15±0.05
0.9±0.2
3.0±0.3
6.0 max.
4.2±0.5
CDBLB_CAX Series
(in mm)
MARKING
EIAJ
CODE
1.5±0.3
1.0±0.3
0.5±0.2
6.3 max.
4.2±0.2
6.0±0.2
0.5±0.1 0.15±0.05
0.9±0.2
3.0±0.3
6.0 max.
4.2±0.5
CDBLB_CAY Series
Specifi ed by Impedance Characteristics (Type 1)
Part Number
Nominal Center
Frequency (fn)
(kHz)
Inclination of
Impedance Curve (1)
Inclination of
Impedance Curve (2)
Capacitance
(C) IC IC Maker Type
CDBLB455KCAX02-B0 455 447.0±1.5kHz
(at |Z|=2.05kohm)
463.0±1.5kHz
(at |Z|=10.0kohm) 140pF±20% TA8104F TOSHIBA Lead
CDBLB455KCAX31-B0 455 447.0±1.5kHz
(at |Z|=2.05kohm)
463.0±1.5kHz
(at |Z|=10.0kohm) 140pF±20% TA31141 TOSHIBA Lead
For safety purposes, avoid applying a direct current between the terminals.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
P05E.pdf
Nov.24,2011
52
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
17
500K
180
50K
90
10K
5K 0
1K
500
–90
100 –180
Impedance (Ω)
Phase (deg)
400 420 440 460 480
Frequency (kHz)
500
100K
50
c Impedance Curve
CDBLB455KCAX02-B0
500K
180
50K
90
10K
5K 0
1K
500
–90
100 –180
Impedance (Ω)
Phase (deg)
400 420 440 460 480
Frequency (kHz)
500
100K
50
CDBLB455KCAX31-B0
Specifi ed by Impedance Characteristics (Type 2)
Part Number Nominal Center
Frequency (fn)
Anti-resonant
Frequency (Fa)
Delta F
(Fa-Fr)
Resonant
Resistance (R)
Capacitance
(C) IC IC Maker Type
CDBKB455KCAX33-R0 - 462.0±1.5kHz 40±4.0kHz 200ohm max. 150pF±20% CXA1474 SONY SMD
CDBLB455KCAY03-B0 - 455.0±1.5kHz 46±5.0kHz 70ohm max. 550pF±20% CXA1184M SONY Lead
CDBLB455KCAX15-B0 - 463.5±1.0kHz 43±2.0kHz 300ohm max. 140pF±20% CXA1183M SONY Lead
CDBLB455KCAX25-B0 - 465.0±1.5kHz 45±4.0kHz 300ohm max. 135pF±20% CXA1484 SONY Lead
CDBLB455KCAX33-B0 - 465.0±1.5kHz 45±4.0kHz 300ohm max. 135pF±20% CXA1474 SONY Lead
For safety purposes, avoid applying a direct current between the terminals.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
Continued on the following page.
500K
100K
10K
Impedance (Ω)
Phase (deg)
400 420 440 460 480 500
Frequency (kHz)
500
50
180
50K 90
5K 0
–90
1K
–180
100
c Impedance Curve
CDBKB455KCAX33-R0
100K
180
5K
90
1K
500
0
100
50
–90
–180
Impedance (Ω)
380 400 420 440 460
Frequency (kHz)
480
10K
10
50K
Phase (deg)
CDBLB455KCAY03-B0
P05E.pdf
Nov.24,2011
53
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
17
Continued from the preceding page.
500K
180
50K
90
10K
5K 0
1K
500
–90
100 –180
Impedance (Ω)
Phase (deg)
390 410 430 450 470
Frequency (kHz)
490
100K
50
c Impedance Curve
CDBLB455KCAX15-B0
500K 180
50K 90
10K
5K 0
1K
500 –90
100
–180
Impedance (Ω)
Phase (deg)
400 420 440 460 480
Frequency (kHz)
500
100K
50
CDBLB455KCAX25-B0
500K
100K
10K
Impedance (Ω)
Phase (deg)
400 420 440 460 480 500
Frequency (kHz)
500
50
180
50K 90
5K 0
–90
1K
–180
100
CDBLB455KCAX33-B0
P05E.pdf
Nov.24,2011
54
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
17
Specifi ed by Recovered Audio Characteristics
Part Number
Nominal Center
Frequency (fn)
(kHz)
Recovered
Audio 3dB BW
(kHz)
Recovered
Audio Output
(mV)
Distortion
(at fn)
(%)
Distortion
(%) IC IC Maker Type
CDBKB450KCAY79-R0 450 fn±3.0 min. 145 ±40 - - TB32302FG TOSHIBA SMD
CDBKB455KCAY07-R0 455 fn±4.0 min. 350 ±60 3.0 max. - MC3357 MOTOROLA SMD
CDBKB455KCAY09-R0 455 fn±4.0 min. 120 ±40 1.5 max. - NE604N PHILIPS SMD
CDBKB455KCAY13-R0 455 fn±4.0 min. 330 ±50 4.0 max. - CXA1003BM SONY SMD
CDBKB455KCAY16-R0 455 fn±4.0 min. 175 ±40 2.0 max. - MC3372 MOTOROLA SMD
CDBKB455KCAY24-R0 455 fn±4.0 min. 100 ±40 2.0 max. - TA31136 TOSHIBA SMD
CDBKB455KCAY27-R0 455 fn±4.0 min. 90 ±30 2.0 max. - TK10487 TOKO SMD
CDBKB455KCAY28-R0 455 fn±4.0 min. 40 ±20 3.0 max. - TA31142F TOSHIBA SMD
CDBKB455KCAY29-R0 455 fn±4.0 min. 100 ±30 2.5 max. - NE605 PHILIPS SMD
CDBKB455KCAY35-R0 455 fn±4.0 min. 100 ±40 2.5 max. - TK10930 TOKO SMD
CDBKB455KCAY40-R0 455 fn±4.0 min. 40 ±20 3.5 max. - TA31145 TOSHIBA SMD
CDBKB455KCAY49-R0 455 fn±4.0 min. 45 ±10 3.0 max. - MC3361 MOTOROLA SMD
CDBKB455KCAY50-R0 455 fn±4.0 min. 64 ±6.4 4.0 max. - CXA3117N SONY SMD
CDBKB455KCAY66-R0 455 fn±4.2 min. 40 ±10 4.0 max. - NJM2590 JRC SMD
CDBKB455KCLX36-R0 455 fn±13.0 min. 90 ±30 2.5 max. 5.0 max.
[within fn ±6kHz] NE(SA)606/NE(SA)616 PHILIPS SMD
CDBKB455KCLX39-R0 455 fn±11.0 min. 130 ±20 2.5 max. 7.0 max.
[within fn ±8kHz] NE607/NE617 PHILIPS SMD
CDBKB455KCLY13-R0 455 fn±13.0 min. 120 ±30 1.5 max. 5.0 max.
[within fn ±8kHz] CXA1003BM SONY SMD
CDBLB455KCAY07-B0 455 fn±4.0 min. 340 ±60 3.0 max. - MC3357 MOTOROLA Lead
CDBLB455KCAY13A-B0 455 fn±4.0 min. 350 ±50 3.0 max. - CXA1003BM SONY Lead
CDBLB455KCAY24-B0 455 fn±4.0 min. 100 ±40 2.0 max. - TA31136 TOSHIBA Lead
CDBLB455KCAY28-B0 455 fn±4.0 min. 40 ±20 3.0 max. - TA31142FN TOSHIBA Lead
CDBLB455KCAY34-B0 455 fn±4.0 min. 65 ±20 2.5 max. - MC13136 MOTOROLA Lead
CDBLB455KCAY40-B0 455 fn±4.0 min. 40 ±20 3.0 max. - TA31145 TOSHIBA Lead
CDBLB455KCAY42-B0 455 fn±4.0 min. 40 ±15 3.0 max. - TK14590/TK14591 TOKO Lead
CDBLB455KCAY49-B0 455 fn±4.0 min. 45 ±10 3.0 max. - MC3361 MOTOROLA Lead
CDBLB455KCAY50-B0 455 fn±4.0 min. 64 ±6.4 4.0 max. - CXA3117N SONY Lead
CDBLB455KCLY09-B0 455 fn±15.0 min. 70 ±20 1.5 max. 3.5 max.
[within fn ±8kHz] NE604N PHILIPS Lead
Continued on the following page.
P05E.pdf
Nov.24,2011
55
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
17
Continued from the preceding page.
Part Number
Nominal Center
Frequency (fn)
(kHz)
Recovered
Audio 3dB BW
(kHz)
Recovered
Audio Output
(mV)
Distortion
(at fn)
(%)
Distortion
(%) IC IC Maker Type
CDBLB455KCLY13-B0 455 fn±15.0 min. 110 ±30 1.5 max. 5.0 max.
[within fn ±8kHz] CXA1003BM SONY Lead
CDBLB455KCAX16-B0 455 fn±4.0 min. 185 ±40 2.0 max. - MC3372 MOTOROLA Lead
CDBLB455KCAX18-B0 455 fn±3.0 min. 180 ±40 2.0 max. - MC3371 MOTOROLA Lead
CDBLB455KCAX36-B0 455 fn±3.5 min. 100 ±25 3.5 max. - NE606/NE616 PHILIPS Lead
For safety purposes, avoid applying a direct current between the terminals.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
AF output
Vcc
0.1μ
0.01μ
C
RX
0.022μ
FM S. S. G.
(Rg = 50Ω)
16 915 14 13 12 11 10
1 82 3 4 5 6 7
8.2k
10k
MC3357
50
0.1μ
+
10μ
47k
CDBLB455KCAY07-B0
CDBKB455KCAY07-R0
Part Number (X) C R
150pF
150pF
1.5kΩ
1.3kΩ
Unit C
R
: F
: Ω
c Test Circuit
MC3357
16
AF output
Vcc
0.1μ
47μ
C
R
X
100p
0.1μ
100p
IF input
915 14 13 12 11 10
1 82 3 4 5 6 7
0.01μ
0.1μ
+
1000p L
0.01μ
NE604
CDBKB455KCAY09-R0
Part Number (X) C R
CDBLB455KCLY09-B0 120pF 560Ω
L
220μH
120pF 1.8kΩ–: F
: Ω
Unit C
R
NE604N
24
AF output
Vcc
0.01μ
C
RX
0.01μ
100μ
CXA1003BM
2700p
51k
0.01μ
0.01μ
0.01μ0.01μ0.01μ
L
100μ
0.01μ
1314151617181920212223
1 12111098765432
0.01μ
CDBLB455KCAY13A-B0
CDBKB455KCAY13-R0
Part Number (X) C R
82pF
82pF
1.2kΩ
1.0kΩ
CDBLB455KCLY13-B0
CDBKB455KCLY13-R0
L
82pF 560Ω220μH
–
–
IF input
: F
: Ω
Unit C
R
CXA1003BM
AF output
: F
: Ω
Unit C
R
Vcc
16 15 14 13 12 11 10 9
1 2 3 4 5 6 7 8
0.01μ 51
51k
0.1μ 510k 8.2k
0.01μ
R
51k
1.8k
0.1μ C
0.01μ
0.1μ
(Rg = 50Ω)
FM S. S. G
220p
68p
MC3372
X
CDBLB455KCAX16-B0
CDBKB455KCAY16-R0
Part Number (X) C R
27pF
100pF
4.3kΩ
1.0kΩ
MC3372
AF output
Unit C
R
: F
: Ω
RF input
16 915 14 13 12 11 10
1 82 3 4 5 6 7
0.01μ
51 51k
0.1μ
510k 8.2k
0.01μ
0.1μ
0.1μ
0.01μ
IF input
68p
220p RX
Test condition
Vcc = +4.0V
R = 6.2kΩ
X: CDBLB455KCAX18-B0
MC3371
Vcc
MC3371
AF output
Vcc
(+2.0V)
10μ +
XR
1μ
0.01μ
C
0.1μ
0.01μ
0.1μ
10μ
+
+
TA31136F
16 915 14 13 12 11 10
1 82 3 4 5 6 7
IF input
CDBLB455KCAY24-B0
CDBKB455KCAY24-R0
Part Number (X) C R
91pF
91pF
1.5kΩ
1.2kΩ
: F
: Ω
Unit C
R
TA31136
Continued on the following page.
P05E.pdf
Nov.24,2011
56
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
17
Continued from the preceding page.
20 19 18 17 16 15 14 13 12
1
R
C
2k
Vcc
TK10487
0.01μ
10μ
+
0.1μ
0.1μ
0.01μ
0.01μ
8.2k
2 3 4 5 6 7 8 9
11
10
X
CDBKB455KCAY27-R0
Part Number (X) C R
33pF 1.0kΩ
: F
: Ω
Unit C
R
c Test Circuit
TK10487
20
AF
output
Vcc
111213141516171819
1 1098765432
430 +2.2μ Vcc
560p 68k 68k
3300p
68k
0.01μ
R
10μ
IF input
0.01μ
0.1μ
10μ
+
+
+
10μ 0.1μ
2SC1048
0.01μ
TA31142F
X
C
Vcc
CDBLB455KCAY28-B0
CDBKB455KCAY28-R0
Part Number (X) C R
22pF
22pF
3.3kΩ
2.7kΩ
: F
: Ω
Unit C
R
TA31142
20
AF output
Vcc
+
0.1μ
0.01μ
C
0.1μ
R
X
0.1μ
150p
5n
0.1μ
100k
100k
22k
0.1μ22μ
NE605
111213141516171819
1 1098765432
IF input
100k
CDBKB455KCAY29-R0
Part Number (X) C R
56pF 2.2kΩ
Unit C
R
: F
: Ω
NE605
24
1
23
2
22
3
21
4
20
5
19
6
18
7
17
8
16
9
15
10
14
11
13
12
R
X
C
Vcc
MC13136
0.01μ
0.01μ
0.15μ
1k
0.1μ
IF input
AF input
0.1μ 0.1μ
0.1μ
+
CDBLB455KCAY34-B0
Part Number (X) CR
100pF 1.2kΩUnit C
R
: F
: Ω
MC13136
24
1
23
2
22
3
21
4
20
5
19
6
18
7
17
8
16
9
15
10
14
11
13
12
R2
R1
CX
Vcc
AF
output
IF input
TK10930
0.01μ
0.1μ
0.1μ
10μ
+
0.1μ
0.1μ
8.2k
CDBKB455KCAY35-R0
Part Number (X) R1 R2
2.0kΩ1.0kΩ
C
33pF
: F
: Ω
Unit C
R
TK10930
20
1
19
2
18
3
17
4
16
5
15
6
14
7
13
8
12
9
11
10
R
X
L
IF input
AF output
C
20k
2k
8.2k
Vcc
NE606 or NE616
0.1μ
0.1μ
0.1μ
0.01μ
0.1μ 0.1μ
2.2μ
+
2.2μ
+
CDBLB455KCAX36-B0
CDBKB455KCLX36-R0
Part Number (X) C R
22pF
27pF
4.7kΩ
2.2kΩ
L
–
1mH : F
: Ω
Unit C
R
NE(SA)606/616
20
AF output
Vcc
0.1μ
0.01μ
0.01μ
C
R
X
L
0.1μ
0.01μ
51
IF input
1119 18 17 16 15 14 13 12
1 102 3 4 5 6 7 8 9
22k
1.5k
NE607/617 (PHILIPS)
8.2k
+10μ
0.1μ 0.1μ
CDBKB455KCLX39-R0
Part Number (X) C R
22pF 2.7kΩ
L
1mH
: F
: Ω
: H
Unit C
R
L
NE(SA)607/617
AF output
0.1μ
R
X
0.1μ
1000p
100k
10μ
IF input
3300p
Vcc
0.1μ
20
++
10μ
5600p
100k
+
2.2μ 430
+
0.01μ 68k
68k
68k
560p
TA31145 (TOSHIBA)
1119 18 17 16 15 14 13 12
1 102 3 4 5 6 7 8 9
CDBLB455KCAY40-B0
CDBKB455KCAY40-R0
Part Number (X) R
3.3kΩ
2.7kΩ
: F
: Ω
Unit C
R
TA31145
Continued on the following page.
P05E.pdf
Nov.24,2011
57
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
17
Continued from the preceding page.
AF
output
Vcc
(1.3V)
0.1μ
0.01μ
C
R
0.0033μ
100k
X
IF input
24 1314151617181920212223
1 12111098765432
100k
8.2k
0.01μ
560p
100k
0.1μ
0.1μ
0.01μ
1μ
TK14590V (TOKO)
0.01μ
0.15μ
100k
100k
CDBLB455KCAY42-B0 3.3kΩ
Part Number (X) C R
22pF
: F
: Ω
Unit C
R
c Test Circuit
TK14590/14591
47 μ 0.01μ 0. 1μ
Vcc
16 15 14 13 12 11 10 9
1 2 3 4 5 6 7
1μ
22
MC3361
100p 1000p
0.1μ
0.1μ
150k
100k
AF output
1k
RX
IF input
0.022μ
0.1μ 0.1μ
8
Part Number (X)
CDBLB455KCAY49-B0
CDBKB455KCAY49-R0
R
1.8kΩ
1.5kΩ
Unit C
R
: F
: Ω
MC3361
24 22 20 19 16 15 14 13172123
1 3 5 6 9 10 11 128742
1200p
1μ
33μ 0.01μ
1200p
1200p
R
X
AF out
Vcc
CXA3117(SONY)
18
Part Number (X)
CDBLB455KCAY50-B0
CDBKB455KCAY50-R0
R
8.2kΩ
6.2kΩ
Unit C
R
: F
: Ω
CXA3117
Part Number (X)
CDBKB455KCAY66-R0
R
3.0kΩ
Unit C
R
: F
: Ω
RX
10μ
S.G.
Vcc
0.1μ
51
0.1μ
AF output
10μ
10k
100k 100k
0.01μ
+
+
12 3 4567
11
12
1314 8
910
NJM2590(JRC)
NJM2590
500
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
50.5
10.1
c Recovered Audio Curve
CDBKB455KCAY07-R0
500
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
50.5
10.1
CDBLB455KCAY07-B0
Continued on the following page.
P05E.pdf
Nov.24,2011
58
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
17
Continued from the preceding page.
500
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
50.5
10.1
c Recovered Audio Curve
CDBKB455KCAY09-R0
500
AF Output Voltage (mV)
T.H.D. (%)
395 435 475 515
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
50.5
10.1
CDBLB455KCLY09-B0
500
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
50.5
10.1
CDBKB455KCAY13-R0
AF Output Voltage (mV)
425 445 465 485
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBKB455KCLY13-R0
500
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
50.5
10.1
CDBLB455KCAY13A-B0
500
AF Output Voltage (mV)
T.H.D. (%)
395 435 475 515
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
50.5
10.1
CDBLB455KCLY13-B0
Continued on the following page.
P05E.pdf
Nov.24,2011
59
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
17
Continued from the preceding page.
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
c Recovered Audio Curve
CDBKB455KCAY16-R0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBLB455KCAX16-B0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBLB455KCAX18-B0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBKB455KCAY24-R0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBLB455KCAY24-B0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBKB455KCAY27-R0
Continued on the following page.
P05E.pdf
Nov.24,2011
60
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
17
Continued from the preceding page.
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
c Recovered Audio Curve
CDBKB455KCAY28-R0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBLB455KCAY28-B0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBKB455KCAY29-R0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBLB455KCAY34-B0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBKB455KCAY35-R0
AF Output Voltage (mV)
T.H.D. (%)
Frequency (kHz)
1
10
100
500
425 445 465 486
0.1
0.5
5
50
5
50
1
10
CDBKB455KCLX36-R0
Continued on the following page.
P05E.pdf
Nov.24,2011
61
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
17
Continued from the preceding page.
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
c Recovered Audio Curve
CDBLB455KCAX36-B0
Frequency (kHz)
425 445 465 485
500
100
50
10
5
1
50.0
10.0
5.0
1.0
0.5
0.1
AF Output Voltage (mV)
T.H.D. (%)
CDBKB455KCLX39-R0
500
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
50.5
10.1
CDBKB455KCAY40-R0
500
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
50.5
10.1
CDBLB455KCAY40-B0
500
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
50.5
10.1
CDBLB455KCAY42-B0
Frequency (kHz)
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
500
100
50
10
5
1
50.0
10.0
5.0
1.0
0.5
0.1
CDBKB455KCAY49-R0
Continued on the following page.
P05E.pdf
Nov.24,2011
62
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
17
Continued from the preceding page.
Frequency (kHz)
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
500
100
50
10
5
1
50.0
10.0
5.0
1.0
0.5
0.1
c Recovered Audio Curve
CDBLB455KCAY49-B0
Frequency (kHz)
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
500
100
50
10
5
1
50.0
10.0
5.0
1.0
0.5
0.1
CDBKB455KCAY50-R0
Frequency (kHz)
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
500
100
50
10
5
1
50.0
10.0
5.0
1.0
0.5
0.1
CDBLB455KCAY50-B0
Frequency (kHz)
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
500
100
50
10
5
1
50.0
10.0
5.0
1.0
0.5
0.1
CDBKB455KCAY66-R0
Specifi ed by S Curve Characteristics
Part Number
Nominal Center
Frequency (fn)
(kHz)
S Curve (1)
Output Volt. at fn
(mV)
S Curve (2)
at fn±4.8kHz
(mV)
IC IC Maker Type
CDBKB455KCAY54-R0 455 165 ±20 170 ±20 TA31149 TOSHIBA SMD
P05E.pdf
Nov.24,2011
63
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
17
24 22 16 15
1 3 59742
1000p
10μ
0.1μ
10μ
1000p
100k
0.1μ
R
X
AF output
1200p
1500p
Vcc (+1.4V)
TA31149(TOSHIBA)
12118 106
IF
input
17
2.2μ
430
23 21 20
Vcc
100k
Vcc
100k
Vcc
19 18 14 13
+
+
+
Part Number (X)
CDBKB455KCAY54-R0
R
2.7kΩ
Unit C
R
: F
: Ω
c Test Circuit
TA31149
440 450 460 470
0.0
0.1
0.2
0.3
0.4
Frequency (kHz)
Volt (V)
c S Curve
CDBKB455KCAY54-R0
P05E.pdf
Nov.24,2011
64
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
17
Ceramic Discriminators for Communications Equipment
MHz Type Ceramic Discriminators
CDSCB10M7 series forms a resonator on a piezoelectric
ceramic substrate. In combination with ICs, this type
obtains stable demodulation characteristics in a wide
bandwidth.
They have 1.0mm max. thickness and small mounting area
(4.5x2.0mm).
c Features
1. Compact and high reliability and recommended for
automotive applications.
2. Can be combined with various ICs. The IC is
determined by the last number in the part number.
3. Stable demodulation characteristics can be
obtained without adjustment.
4. Stable temperature characteristics
5. Available lead (Pb) free solder refl ow.
4.1 max.
1.0 max.
4.5±0.1
0.2±0.2
2.0±0.1
0.3±0.2
0.4(ref.) 0.4(ref.)
1.4 max.
0.4±0.05
1.5±0.1
0.8±0.10.8±0.1
1.5±0.1 (in mm)
CDSCB Series
Part Number
Center
Frequency (fo)
(MHz)
Recovered
Audio 3dB BW
(kHz)
Recovered
Audio Output
(mV)
Distortion
(%)
S Curve
(mV) IC
CDSCB10M7GA105A-R0 10.700 ±30kHz 220 min. 110 min. 1.5 max. - TEA5757HL
CDSCB10M7GA113-R0 10.700 ±30kHz 300 min. 110 min. 1.0 max. - TA2154FN
CDSCB10M7GA119-R0 10.700 ±30kHz 500 min. 75 min. 1.0 max. - TRF6901
CDSCB10M7GA121-R0 10.700 ±30kHz 390 min. 80 min. 1.0 max. - LV23100V
CDSCB10M7GA135-R0 10.700 ±30kHz 155 min. 75 min. - - TH71101
CDSCB10M7GA136-R0 10.700 ±30kHz 140 min. 120 min. - - TH7122
CDSCB10M7GF072-R0 10.700 (fn) fn±150 min. 130 min. 2.0 max. - TA31161
CDSCB10M7GF107S-R0 10.700 (fn) fn±80 min. 52 min. 3.0 max. - TA31272FN
CDSCB10M7GF109-R0 10.700 (fn) fn±100 min. 170 min. 3.0 max. - TK14588V
CDSCB10M7GF123-R0 10.700 (fn) - - - 900 min. TA31275FN
CDSCB10M7GF123S-R0 10.700 (fn) - - - 900 min. TA31275FN
CDSCB10M7GF126-R0 10.700 (fn) - - - 400 min. NJM2295AV
(fn) means nominal center frequency.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
For safety purposes, avoid applying a direct current between the terminals.
P05E.pdf
Nov.24,2011
65
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
18
48 41424344454647
13
12
20191817161514
4.7μ
X
150
S.S.G.
Vcc (3.0V)
0.1μ
0.47μ
TEA5757HL
(PHILIPS)
+
40
21
39
22
38
23
37
24
X: CDSCB10M7GA105A-R0
0.1μ
0.1μ 10μ
100μ
10
100k
+
+
AFC (n)
AFC (p)
AF OUT
DC OUT
330p
0.22μ
11
10
9
8
7
6
5
4
3
2
1
25
26
27
28
29
30
31
32
33
34
35
36
0.1μ
Unit C
R
: F
: Ω
c Test Circuit
CDSCB10M7GA105A-R0
30 23242526272829
1 8765432
2.2μ
D.C. OUT
S.S.G.
Vcc (1.2V)
AF OUT
0.01μ
0.01μ
0.01μ
0.01μ
680p
TA2154FN (TOSHIBA)
+
22
9
21
10
20
11
19
12
18
13
17
14
16
15
X: CDSCB10M7GA113-R0
0.01μ
X
Unit C
R
: F
: Ω
CDSCB10M7GA113-R0
0.01μ
0.01μ
0.01μ
0.01μ
0.01μ
0.47μ
2.2μ 0.1μ
0.1μ
0.22μ
4.7μ
120p
220k
68p
15p
82p
47p
1000p
100p
100p
10k
10k
1k
+
10
IF Input AF Output
Vcc (3.0V)
(TEXAS INSTRUMENTS)
TRF6901
PIC16F84
X
Unit C
R
L
: F
: Ω
: H
+
X: CDSCB10M7GA119-R0
1
2
3
4
5
6
7
8
9
10
11
12
36
35
34
33
32
31
30
29
28
27
26
25
13 14 15 16 17 18 19 20 21 22 23 24
48 47 46 45 44 43 42 41 40 39 38 37
18 17 16 15 14 13 12 11 10
123456789
CDSCB10M7GA119-R0
0.47μ
0.01μ
AF Output D.C. Output
LV23100V (SANYO)
PIC16F84 (Control IC)
10k
10k
10k
Vcc (3.2V)
1μ
0.047μ
0.047μ
2.2μ 0.1μ
1k
0.047μ10k75
0.015μ
0.01μ
100μ
10p
100p
10p
22μ
10μ
3.3k
+
1μ
+
+
+
+
+
+
S.G.
X
Unit C
R
: F
: Ω
X: CDSCB10M7GA121-R0
36 35 34 33 32 31 30 2829 27 26 25 24 23 22 21 20 19
1234567 98 101112131415161718
18
1
17
2
16
3
15
4
14
5
13
6
12
7
10
9
11
8
CDSCB10M7GA121-R0
Unit C
R
: F
: Ω
X: CDSCB10M7GA135-R0
12345678
9
10
11
12
13
14
15
16
1718192021222324
25
26
27
28
29
30
31
32
220k
0.01μ
0.01μ
1000p
0.1μ
0.01μ1000p100p
330p
0.033μ
12p
0.01μ
0.01μ
0.01μ
1000p
C.D.
330p10μ
+
S.G.
Vcc (5.0V)
TH71101, TH71102,
TH71111 or TH71112
(MELEXIS)
FKS-OUTAF-OUT
330k
CDSCB10M7GA135-R0
1 2 3 4 5 6 7 8
123456789
18 17 16 15 14 13 12 11 10
9
10
11
12
13
14
15
16
1718192021222324
25
26
27
28
29
30
31
32
Unit C
R
: F
: Ω
X: CDSCB10M7GA136-R0
0.1μ
2.2μ
1k
100k
3.3k
+0.1μ
100p
10k
PIC16F84 (Control IC)
TH7122
[Internal AFC Enabled]
(MELEXIS)
Vcc (5.0V)
0.01μ
0.01μ
0.1μ0.01μ 330p
330p 100k
330p
S.G. C.D.
FKS-OUT
AF-OUT
330p
330p
0.01μ
CDSCB10M7GA136-R0
Continued on the following page.
P05E.pdf
Nov.24,2011
66
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
18
Continued from the preceding page.
16
Vcc (3V)
9101112131415
1 8765432
IF IN
AF OUT
0.01μ
33μ 0.01μ
R
10p
4.7μ
X
0.01μ
0.01μ
0.01μ
+
TA31161 (TOSHIBA)
X: CDSCB10M7GF072-R0
R: 820
Unit C
R
L
: F
: Ω
: H
c Test Circuit
CDSCB10M7GF072-R0
Vcc (5.0V)
+
123456789101112
24 23 22 21 20 19 18 17 16 15 14 13
0.01μ
TA31272FN (TOSHIBA)
AF Output
C.D.
0.01μ
0.01μ
1000p
100μ
0.01μ
0.01μ
0.01μ
1.2k
C.D.: Ceramic Discriminator
Unit R
C
L
: Ω
: F
: H
S.S.G.
CDSCB10M7GF107S-R0
0.01μ
0.01μ
Vcc (3V)
12k
51k
1000p
8p
+
S.S.G.
R
D.C. OUT AF OUT
X
0.01μ
0.01μ
0.01μ
0.01μ
4.7μ
51
0.01μ
1.2μ
TK14588V (TOKO)
Unit C
R
L
: F
: Ω
: H
X: CDSCB10M7GF109-R0
R: 820
910111213141516
87654321
CDSCB10M7GF109-R0
Vcc (5.0V)
1 2 3 4 5 6 7 8 9 10 11 12
24 23 22 21 20 19 18 17 16 15 14 13
0.1μ
0.01μ
TA31275FN (TOSHIBA)
1000p
3300p
0.01μ
AF OUT
DC-OUT
0.01μ
0.01μ
0.1μ
0.1μ
0.1μ 1.8k
0.01μ
X: CDSCB10M7GF123-R0
Unit C
R
: F
: Ω
S.S.G.
CDSCB10M7GF123-R0
Vcc (5.0V)
12345678910
20 19 18 17 16 15 14 13 12 11
NJM2295AV (JRC)
0.01μ
DC-OUT
100p
0.01μ
10μ
0.01μ
10μ
180
8p
C.D.
0.01μ
X: CDSCB10M7GF126-R0
Unit C
R
: F
: Ω
S.G.
+
+
10μ
+
10μ
+
CDSCB10M7GF126-R0
P05E.pdf
Nov.24,2011
67
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
18
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100dBμ
= ±75kHz
= 1kHz
= 3.0V
1
10
100
1000
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
0.1
1
10
100
AF Output
Distortion
c Recovered Audio Curve
CDSCB10M7GA105A-R0
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100dBμ
= ±75kHz
= 1kHz
= 1.2V
1
10
100
1000
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
0.1
1
10
100
AF Output
Distortion
CDSCB10M7GA113-R0
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100dBμ
= ±60kHz
= 1kHz
= 3.0V
1
10
100
1000
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
0.1
1
10
100
AF Output
Distortion
CDSCB10M7GA119-R0
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100dBμ
= ±75kHz
= 1kHz
= 3.2V
1
10
100
1000
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
0.1
1
10
100
AF Output
Distortion
CDSCB10M7GA121-R0
AF Output Voltage (mV)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100dBμ
= ±50kHz
= 1kHz
= 5.0V
1
10
100
1000
10.4 10.5 10.6 10.7 10.8 10.9 11.0
0.1
CDSCB10M7GA135-R0
AF Output Voltage (mV)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100dBμ
= ±50kHz
= 1kHz
= 5.0V
1
10
100
1000
10.4 10.5 10.6 10.7 10.8 10.9 11.0
0.1
CDSCB10M7GA136-R0
Continued on the following page.
P05E.pdf
Nov.24,2011
68
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
18
Continued from the preceding page.
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
100 10
1000 100
10 1
10.1
10.3 10.5 10.7 10.9 11.110.4 10.6 10.8 11.0
Input
fdev.
fmod.
Vcc
= 100dBμ
= ±80kHz
= 1kHz
= 3.0V
c Recovered Audio Curve
CDSCB10M7GF072-R0
Input
fdev.
fmod.
Vcc
= 100dBμ
= ±64kHz
= 1kHz
= 3.0V
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
1000
100
10
1
100
10
1
0.1
10.3 10.5 10.7 10.9 11.1
10.4 10.6 10.8 11.0
CDSCB10M7GF109-R0
Volt (V)
Frequency (MHz)
0.5
0.0
1.0
1.5
2.0
2.5
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
c S Curve
CDSCB10M7GF123-R0
Volt (V)
Frequency (MHz)
1.0
2.0
3.0
4.0
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
CDSCB10M7GF126-R0
P05E.pdf
Nov.24,2011
69
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
18
Ceramic Discriminators Notice
1. Standard Reflow Soldering Conditions
(1) Reflow
CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA),
Water (Demineralized Water), Cleaning Water Solution
(Cleanthrough-750H, Pine Alpha 100S), Silicon
(Technocare FRW)
2. Wash
(1) Cleaning Solvent
o Immersion Wash
2 minutes max. in above solvent at +60°C max.
o Shower or Rinse Wash
2 minutes max. in above solvent at +60°C max.
(2) Cleaning Conditions
o When components are immersed in solvent, be sure to
maintain the temperature of components below the
temperature of solvent.
o Please do not use ultrasonic cleaning.
o Total washing time should be within 4 minutes.
o Please ensure the component is thoroughly evaluated
in your application circuit.
o Please do not use chlorine, petroleum or alkaline
cleaning solvents.
o If you plan to use any other type of solvents, please
consult with Murata or Murata representative prior to
using.
(3) Notice
Electrode is directly soldered with the tip of soldering iron
at +350±5°C for 3.0±0.5 seconds.
(2) Soldering Iron
Peak
(260°C max.)
Heating
(230°C)
Gradual
Cooling
Pre-heating
(150-180°C)
100
230
260
Temperature (°C)
60-120 sec. 40 sec.
max.
30 sec.
min.
120 sec.
min.
Filter is soldered twice within the following temperature
conditions.
c CDBKB Series Notice (Soldering and Mounting)
Continued on the following page.
c CDBKB Series Notice (Handling)
P05E.pdf
Nov.24,2011
70
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
1. The component will be damaged when an excessive
stress is applied.
2. If the component is cleaned, please confi rm
that the reliability has not been degraded.
3. In case of covering fi lter with over coating,
conditions such as material of resin, cure
temperature, and so on should be evaluated
carefully.
4. Do not use strong acidity fl ux, more than 0.2wt%
chlorine content, in refl ow soldering.
5. The product, packed in a moisture-proof bag (dry
pack), is sensitive to moisture.
The following treatment is required before
applying refl ow soldering, to avoid package
cracks or reliability degradation caused by
thermal stress. When unpacked, store the component
in an atmosphere of below 25 degrees C. and below
65%R.H., and solder within 48 hours.
Ceramic Discriminators Notice
c CDBLB Series Notice (Handling)
Continued from the preceding page.
P05E.pdf
Nov.24,2011
71
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
1. Do not use this product with bend. The component
may be damaged if excess mechanical stress is
applied to it mounted on the printed circuit board.
2. The component will be damaged when an excessive
stress is applied.
3. No type of refl ow soldering should be applied to this
component.
4. Do not clean or wash the component as it is not
hermetically sealed.
5. Do not use strong acidity fl ux, more than 0.2wt%
chlorine content, in fl ow soldering.
6. In case of covering discriminator with over coating,
conditions such as material of resin, cure
temperature, and so on should be evaluated
carefully.
Ceramic Discriminators Notice
Continued on the following page.
Filter is soldered twice within the following temperature
conditions.
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered at +300±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(2) Soldering Iron
The component is recommended with placement
machines that employ optical placement capabilities. The
component might be damaged by excessive mechanical
force. Please make sure that you have evaluated by
using placement machines before going into mass
production. Do not use placement machines that utilize
mechanical positioning. Please contact Murata for details
beforehand.
(3) Condition for Placement Machines
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. To prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated on positioning accuracy,
etc. Careful checking and maintenance are necessary
to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component. Depending on the soldering
conditions, the effective area of terminations may be
reduced. Solder containing Ag should be used to
prevent the electrode erosion.
(4) Other
o Soldering and Mounting
Temperature (°C)
100
230
260
30 sec.
min.
40 sec.
max.
Peak
(260°C max.)
Pre-heating
(150-180°C)
Heating
(230°C)
Gradual
Cooling
120 sec.
min.
60-120 sec.
[Component Direction]
[Component Layout Close to Board]
Place the
component
laterally to the
direction in
which stress
acts.
Susceptibility to
stress is in the order
of : A>C>B
B
AC
Slit
Perforation
c CDSCB Series Notice
P05E.pdf
Nov.24,2011
72
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
Ceramic Discriminators Notice
o Storage and Operating Conditions
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
2. For safety purposes, avoid applying a direct current
between the terminals.
1. Product Storage Condition
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
Continued from the preceding page.
Do not clean or wash the component as it is not
hermetically sealed.
2. Wash
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
3. Coating
P05E.pdf
Nov.24,2011
73
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
Ceramic Discriminators Standard Land Pattern Dimensions/Packaging
(in mm)
1.2 1.2
2.04.9
2.6
c Standard Land Pattern Dimensions
CDBKB Series
2.6
1.0 2.0 1.0
3.0
(in mm)
CDSCB Series
Part Number Taping ø180mm Bulk
500
2000
500
CDBKB Series
CDBLB Series
CDSCB Series
(pcs.)
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
c Minimum Quantity
User direction of feed
Cover film
3° max.
+0.1
-0.0
+1.0
-0
+0
-3.0
Dimensions of Carrier Tape Dimensions of Reel
(in mm)
Leader
Cover film
Empty EmptyComponents
Trailer
160 to 190
160 to 200
400 to 560
(ø60 )
(ø180 )
17.0±0.3
4.0±0.1
7.5±0.1 1.75±0.1
16.0±0.15
3.3±0.1
7.2±0.1
8.0±0.1
6.3±0.1
2.0±0.1
19.4±1.0
ø13.0±0.5
ø1.5
2.0±0.2
s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP
c CDBKB Series
Continued on the following page.
P05E.pdf
Nov.24,2011
74
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
Ceramic Discriminators Standard Land Pattern Dimensions/Packaging
Continued from the preceding page.
4.0±0.1
Cover film
4.0±0.1
2.0±0.05
12.0±0.2
(9.0)
ø1.5+0.1
-0
ø1.5+0.1
-0
5.5±0.05
1.75±0.1
4.7±0.1
User direction of feed
s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP
0.3±0.05
MAX
1.1±0.1
(3°)
2.2±0.1
0EELINGSTRENGTH
0.1 to 0.7N 10°
Dimension of reel
( ): Reference
(in mm)
ø13.0±0.2
2.0±0.5
17.0±1.0
180+0.1
-1.5
60+0.1
-0
240 to 280
400 to 560
160 to 190
%MPTY#OMPONENTS
Cover film
%MPTY
4RAILER ,EADER
13.0+1.0
-0
$IMENSIONSOF#ARRIER4APE
c CDSCB Series
P05E.pdf
Nov.24,2011
75
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
!Note P05E.pdf
Nov.24,2011
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please review our product specifi cations or consult the approval sheet for product specifi cations before ordering.
