A
2010
Y-Sol® Photovoltaic
Cable Assemblies
Connectors and
Junction Boxes
Hermetic Sealed - One Step Process
Why Hermetic Sealed?
Customer advantages with our cable assemblies
The Hermetic Sealed technology combines the advantages of cost and quality
- Less installation time required because of overmolded cable assemblies
which are pre-assembled and „ready-to-plug“.
- Permanent and safe operation of the PV plant. Y-Sol connectors fulfil the IP68 protection
class. The overmolding process protects the inner parts and contacts.
- Safe power transmission of up to 30A.
- Standard products are available as well as customised solutions.
- Long life time of the complete assembly even under harsh environmental conditions.
- Cross linked cables are used as standard.
What is the meaning of Hermetic Sealed?
Hermetic Sealed is a one step overmolding process.
In a one step process the connector is molded into its final shape and makes a solid
connection with the cable. No screws or extra parts are needed. The overmolding forms a
permanent hermetic sealing around the cable and contact (fig 1).
Yamaichi has developed this technology for the connectors Y-Sol3, Y-Sol3 T-Junction, Y-Sol4
and for the Thin Film Junction Box. These products come ready-to-plug to the customer.
100% tested for easy and safe assembly.
For worldwide usage, the products are tested and certified by TÜV and UL.
fig 1. shows a 3D Hermetic Sealed
Y-Sol3 T-Junction
One Step Process
Why Hermetic Sealed?
Customer advantages with our Thin Film Junction Box
The TF J-Box from Yamaichi is delivered with cables and overmolded connectors.
In addition to the advantages of our cable assemblies, the Hermetic Sealed
TF J-Box has the following features:
- Delivered as a pre-assembled Hermetic Sealed system, complete with cables
and connectors.
- Configuration according to customer requirements.
- Fully overmolded integrated bypass diode. This guarantees safe operation under
different lighting conditions or shadowing.
- The Hermetic Sealed diode is homogenously surrounded by plastic material. Heat generated
by the diode is absorbed. This means reduced stress on the diode and longer life time (fig 2).
fig 2. The bypass diode is overmolded by plastic material.
During shadowing the diode will heat up.This heat is absorbed
and eliminated. The plastic material has a 30 times higher heat
conductivity than air.
Diode fully
overmolded
Y-Sol3 Cable Assemblies
Y-Sol3
Ø 3mm contacts without locking
Certified: acc. to EN50521 (TÜV)
acc. to UL 1703
Y-SOL3AOV - F1 - 4U - 1000 - GM*
Series No.
for Overmolded
(Hermetic Sealed)
M1 = Male
(with Partial Strip off)
F1 = Female
(with Partial Strip off)
M2 = Male (with Blank Cut)
F2 = Female (with Blank Cut)
Cable Cross Section
2T = 2.5mm², with TÜV
4U = 4.0mm², with TÜV and UL
4T = 4.0mm², with TÜV
6T = 6.0mm², with TÜV
Overall Length in mm (e.g. 1000 = 1 meter)
GM* = Internal Style No. (determined by Yamaichi)
Part Number (example) and various combinations
Specifications
Description Y-SOL3
Diameter ∅13.5mm
Degree of protection IP68 (plugged) and IP20 (unplugged)
Protection class II
Cable cross section 2.5mm², 4.0mm² and 6.0mm²
Ambient temperature -40°C to +85C
Contact resistance < 5mΩ (typ. value 1mΩ up to 3mΩ)
Voltage rating 1,000 V DC acc. to TÜV EN50521 600 V DC acc. to UL 1703
Current rating 30A (based on 4mm² cross section)
Extraction force > 89 Newton
Cable pull-out force > 350 Newton
Y-Sol3 connector is a ready-made solar cable assembly,
“ready-to-plug“ in your PV installation.
100% controlled quality by Yamaichi.
Ready-to-Plug
For final part numbers please contact Yamaichi before odering
Specifications
Y-Sol3 T-Junction Assemblies
Y-Sol3 T-Junction is a ready-made solar cable assembly,
“ready-to-plug“ in your PV installation. It is made according
to customer requirements. The number of T-Junctions and
adapter cables can be freely specified.
100% controlled quality by Yamaichi.
Y-Sol3 T-Junction
Ø 3mm overmolded cable harness
for connection of PV panels in parallel
configuration.
Certified: acc. to EN50521 (TÜV)
acc. to UL 1703
Y-SOL3T - F 4 3 - 6T - 3200 - GM*
Series No.
for Overmolded
(Hermetic Sealed)
M = Male F = Female
Number of T-Junctions (e.g. 4)
Number of Adapter Cables (e.g. 3)
Cable Cross Section
6T = 6.0mm², with TÜV
6U = 6.0mm², with TÜV and UL
Overall Length in mm (e.g. 3200 = 3.2 meter)
GM* = Internal Style No. (determined by Yamaichi)
Part Number (example) and various combinations
Description Y-SOL3 T-Junction
Diameter ∅17mm
Degree of protection IP68 (plugged) and IP20 (unplugged)
Protection class II
Cable cross section 6.0mm²
Ambient temperature -40°C to +85C
Contact resistance < 5mΩ (typ. value 1mΩ up to 3mΩ)
Voltage rating 1,000 V DC acc. to TÜV EN50521 600 V DC acc. to UL 1703
Current rating 30A (based on 6mm²)
Extraction force > 89 Newton
Cable pull-out force > 350 Newton
For final part numbers please contact Yamaichi before odering
Ready-to-Plug
Y-Sol4 Cable Assemblies
Part Number
Y-SOL4-RELEASE-TOOL-SR
Y-SOL4 release tool
Description Y-SOL4
Height 12mm
Degree of protection IP68 (plugged) and IP20 (unplugged)
Protection class II
Cable cross section 1.5mm², 2.5mm² and 4.0mm²
Ambient temperature -40°C to +85°C
Contact resistance < 5mΩ (typ. value 1mΩ up to 3mΩ)
Voltage rating 1,000 V DC acc. to TÜV EN50521 600 V DC acc. to UL 1703
Current rating 30A (based on 4mm² cross section)
Extraction force > 89 Newton
Cable pull-out force > 350 Newton
Y-Sol4 is a ready-made solar cable assembly, “ready-to-plug“
in your PV installation. The Y-Sol4 connector has a security locking
function. Once closed a release tool is necesary to re-open the
connection. 100% controlled quality by Yamaichi.
Certified: acc. to EN50521 (TÜV)
acc. to UL 1703
Specifications
Y-SOL4AOV - M1 - 4T - 1000 - GM*
Series No.
for Overmolded
(Hermetic Sealed)
M1 = Male
(with Partial Strip off)
F1 = Female
(with Partial Strip off)
M2 = Male (with Blank Cut)
F2 = Female (with Blank Cut)
Cable Cross Section
1U = 1.5mm², with TÜV and UL
2U = 2.5mm², with TÜV and UL
4T = 4.0mm², with TÜV
Overall Length in mm (e.g. 1000 = 1 meter)
GM* = Internal Style No. (determined by Yamaichi)
Part Number (example) and various combinations
Y-Sol4
Ø 4mm contacts with locking
For final part numbers please contact Yamaichi before odering
Y-Sol4 Crimp Assembly Connector (C.A.T.)
The Y-Sol4 C.A.T. (Crimp Assembly Type) is a connector for field installation
by crimp connection. The connector comes in male and female types and has only
two parts to connect with the cable. The cable is assembled by using a standard
crimp tool. This crimping can be done manually or automatically.
Y-Sol4 C.A.T.
Ø 4mm contacts - crimp type assembly
Customer Advantages
4 For manual or automatic assembly
4 Two piece design
4 Installation with a standard crimp tool
Y-Sol4 C.A.T. Male Connector
For Specifications please refer to table on next page
Y-Sol4 C.A.T. Female Connector
in preparation in preparation
Part 1
Part 2
Part 1
Assembled
Part 2
PVP0402 - 102 - 02 02 - 00*
Part Number (example) and various combinations
Series No. for
Crimp Assembly Type
PVP0402 = Plug
PVS0402 = Socket
Crimp Type Unit Packaging
Cable Cross Section
01 = 1.5mm² to 2.5mm²
02 = 4.0mm² to 6.0mm²
Cable Outer Dimension
02 = 5.8mm up to 7.0mm
(other diameters are being planned)
00* = Internal Style No. (determined by Yamaichi)
For final part numbers please contact Yamaichi before odering
Crimp Type
Assembled
Y-Sol4 Free Assembly Connector (F.A.T.)
Tool Free
The Y-Sol4 F.A.T. (Free Assembly Type) is a connector for fast and safe field
installation. The connector comes in male and female types and has only two
parts to connect with the cable. The assembly is closed by simply screwing
the two parts together. There are absolutely no tools for this operation required.
Y-Sol4 F.A.T.
Ø 4mm contacts - spring type assembly
Customer Advantages
4 No tool required
4 Two piece design
4 Installation in just three steps
PVP0402 - 202 - 02 02 - 00*
Part Number (example) and various combinations
Y-Sol4 F.A.T. Male Connector Y-Sol4 F.A.T. Female Connector
in preparation in preparation
Part 1
Assembled
Part 2
Series No. for
Free Assembly Type
PVP0402 = Plug
PVS0402 = Socket
Spring Type Unit Packaging
Cable Cross Section
01 = 1.5mm² to 2.5mm²
02 = 4.0mm² to 6.0mm²
Cable Outer Dimension
02 = 5.8mm up to 7.0mm
(other diameters are being planned)
00* = Internal Style No. (determined by Yamaichi)
Part 1
Assembled
Part 2
For final part numbers please contact Yamaichi before odering
Description Y-SOL4 F.A.T. / Y-SOL4 C.A.T.
Diameter ∅ 18.8mm
Degree of protection IP67
Protection class II
Cable cross section 1.5mm² to 2.5mm² and 4.0mm² to 6.0mm²
Cable outer diameter 5.8mm to 7.0mm (other dimensions are planned)
Ambient temperature -40°C to +85°C
Contact resistance < 5mΩ (typ. value 1mΩ up to 3mΩ)
Voltage rating 1,000 V DC acc. to TÜV EN50521 600 V DC acc. to UL 1703
Current rating 30A (based on 4mm² cross section)
Extraction force > 89 Newton
Step 3
Tighten screw cap
Step 2
Insert contact to housing
in the direction of the arrow
Step 1
Insert cable to contact.
Close spring to hold cable
Assembly Process Spring Contact
Part Number (example) and various combinations
Specifications
NEW
spring
TF J-Box for Thin Film Modules
The Y-Sol® Thin Film J-Box can be easily assembled either manually
or in an automatic assembly process. Contacting to the PV module
is realised by spring loaded contacts in the J-Box lid. One bypass
diode can be integrated optionally as per customer requirements.
100% controlled quality by Yamaichi.
Certified: acc. to EN50521 (TÜV)
acc. to UL 1703
Y-SOL4B TFL 1 2 1U M06 F08 GM*
Series No.
for Overmolded
(Hermetic Sealed)
TFS = Short Type
TFL = Long Type
0 = No Bypass Diode
1 = With Bypass Diode
Two Spring Contacts
Cable Cross Section
1U = 1.5mm², with TÜV and UL
2U = 2.5mm², with TÜV and UL
M06 = Male Cable (e.g. 06 = 0.6 meter)
F08 = Female Cable (e.g. 08 = 0.8 meter)
GM* = Internal Style No. (determined by Yamaichi)
Part Number (example) and various combinations
TF J-Box
Description TF J-Box
Dimensions (L x W x H) in mm Short Type: 60 x 70 x 12 Long Type: 68 x 70 x 12
Degree of protection IP65
Protection class II
Number of diodes Optional with one bypass diode
Number of ribbons 2
Ribbon width max. 10mm
Conductor cross section 1.5mm² and 2.5mm²
Voltage rating 1,000 V DC acc. to TÜV EN50521 600 V DC acc. to UL 1703
Current rating up to 7A depending on J-Box configuration
Specifications
Special Features
Spring loaded contacts
Double sided adhesive
Customer Advantages
No tools required
Easy and safe contact assembly
Simple mounting
to module
For final part numbers please contact Yamaichi before odering
Junction Boxes
Part Number (example) and various combinations
Series No.
Y-SOL3B with Y-Sol3
Y-SOL4B with Y-Sol4
Si Wafer J-Box
Number of Bypass Diodes
(3 is standard)
Number of Contacts/Rails
C = Clamped Contacts
S = Solder Contacts
1 = PCB Standard Type
2 = Non Ribbon Crossing Type
Cable Cross Section
4T = 4.0mm², with TÜV 6T = 6.0mm², with TÜV
M10 = Male Cable overall Length (e.g. 10 = 1 meter)
F8 = Female Cable overall Length (e.g. 8 = 0.8 meter)
GM* = Internal Style No. (determined by Yamaichi)
For final part numbers please contact Yamaichi before odering
Y-SOL4B SI 3 4 C 1 4T M10 F8 GM*
Universal J-Box for Silicon Wafer Modules
Featuring SMD diode technology, the Y-Sol® Universal J-Box shows approx. 40% less
heat development compared to J-Boxes with conventional radial diodes. Automated
assembly in an assembly line is possible, either by spring or soldering connection.
It is one of the flatest Silicon Wafer J-Boxes on the market (<27mm height) and features
integrated cable holders. 100% controlled quality by Yamaichi.
Description Universal J-Box
Dimensions (LxWxH) 111 x 140 x 26.5
Degree of protection IP67
Protection class II
Number of diodes Optional with up to 6 bypass diodes
Number of ribbons 2 - 8
Ribbon width max. 7.5mm
Conductor cross section 4.0mm² and 6.0mm²
Voltage rating 1,000 V DC acc. to TÜV EN50521
Current rating up to 20A depending on J-Box configuration
SMD Diode
In case of a short-cut there is
40% less heat in the PV junction box
This means more saftey in operation
Special Feature
Customer Advantages
Universal J-Box
Specifications
Certified:
acc. to EN50521 (TÜV)
Y-SOL4B TFL 1 2 1U M06 F08 GM*
Reduced to the Optimum
Yamaichi Eco-Si J-Box for Silicon Wafer Modules
4 Mechanical Rating: IP67
4 Number of Diodes: up to 3 bypass diodes
4 Number of Ribbons: up to 4
4 Voltage Rating: 1,000V DC
4 Current Rating: 12A
4 For welding or soldering connection
4 Ready equipped with Y-Sol3 or Y-Sol4 connector
The cost effective solution for Silicon Wafer Modules
with up to 3 bypass diodes
The Eco-Si
Junction Box
Silicon is a Semiconductor. It is conductive under light.
It becomes non conductive when shadowed. In the case
of partial shadowing on a PV panel, the affected cell area
must be controlled by the Junction Box
The Intelligent
Junction Box
New Innovative Products
Coming Soon
Aug 2010
4 Intelligent System Power Control on module level
4 Wireless Communication
4 Power Organisation by a transistor controlled
J-Box with Maximum Power Point (MPP)
tracking on module level
4 Monitoring and Control
YAMAICHI ELECTRONICS USA Inc.
475 Holger Way
San Jose, CA 95134
Sales Office
Tel: 1-408-715-9100
Fax: 1-408-715-9199
e-mail: info@yeu.com
Internet: www.yeu.com
For further information please contact Yamaichi
PV panel performance
data send to
Active Combiner
Monitoring and Control
using a PC environment
for isolating problems
Intelligent J-Box
Wireless
Active Combiner
sends on data to PC
YAMAICHI ELECTRONICS
Deutschland GmbH
Karl-Schmid-Str. 9
81829 Munich
Germany
Tel.: +49 (0) 89 45 10 9 - 0
Fax: +49 (0) 89 45 10 9 - 110
e-mail: sales@yamaichi.de
Internet: www.yamaichi.eu
