Order this document by MBRD835L/D SEMICONDUCTOR TECHNICAL DATA DPAK Surface Mount Package This SWITCHMODE power rectifier which uses the Schottky Barrier principle with a proprietary barrier metal, is designed for use as output rectifiers, free wheeling, protection and steering diodes in switching power supplies, inverters and other inductive switching circuits. This state of the art device has the following features: * Low Forward Voltage * 125C Operating Junction Temperature * Epoxy Meets UL94, VO at 1/8 * Guaranteed Reverse Avalanche * Compact Size * Lead Formed for Surface Mount Mechanical Characteristics * Case: Epoxy, Molded * Weight: 0.4 gram (approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable * Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds * Shipped 75 units per plastic tube * Available in 16 mm Tape and Reel, 2500 units per 13 reel, by adding a "T4" suffix to the part number * Marking: B835L Motorola Preferred Device SCHOTTKY BARRIER RECTIFIER 8 AMPERES 35 VOLTS 4 1 1 4 3 3 CASE 369A-13 DPAK PLASTIC, STYLE 3 MAXIMUM RATINGS Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Rating VRRM VRWM VR 35 Volts Average Rectified Forward Current (At Rated VR) TC = +88C IF(AV) 8 Amps Peak Repetitive Forward Current (At Rated VR, Square Wave, 20 kHz) TC = + 80C IFRM 16 Amps Non-Repetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 75 Amps Repetitive Avalanche Current (Current Decaying Linearly to Zero in 1 s, Frequency Limited by TJmax) IAR 2 Amps Storage Temperature Tstg - 65 to +150 C TJ - 65 to +125 C dv/dt 10,000 V/s Thermal Resistance -- Junction to Case RJC 6 C/W Thermal Resistance -- Junction to Ambient(1) RJA 80 C/W Operating Junction Temperature Voltage Rate of Change (Rated VR) THERMAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage(2) (iF = 8 Amps, TC = + 25C) (iF = 8 Amps, TC = +125C) VF 0.51 0.41 Volts Maximum Instantaneous Reverse Current(2) (Rated dc Voltage, TC = + 25C) (Rated dc Voltage, TC = +100C) IR 1.4 35 mA (1) Rating applies when surface mounted on the minimum pad size recommended. (2) Pulse Test: Pulse Width = 300 s, Duty Cycle 2%. SWITCHMODE is a trademark of Motorola, Inc. Preferred devices are Motorola recommended choices for future use and best overall value. Rev 1 Device Rectifier Motorola, Inc. 1996 Data 1 MBRD835L 10 25C TJ = 125C 1 0.1 0.01 0 0.1 0.2 0.3 0.4 0.5 vF, INSTANTANEOUS VOLTAGE (VOLTS) 0.6 iF, INSTANTANEOUS FORWARD CURRENT (AMPS) iF, INSTANTANEOUS FORWARD CURRENT (mA TYPICAL CHARACTERISTICS 10 TJ = 125C 1 75C 0.1 25C 0.01 0 Figure 1. Maximum Forward Voltage 0.1 0.2 0.3 0.4 0.5 vF, INSTANTANEOUS VOLTAGE (VOLTS) 0.6 Figure 2. Typical Forward Voltage 1000 100 TJ = 125C 10 100C I R, REVERSE CURRENT (mA) I R, REVERSE CURRENT (mA) 100 1 25C 0.1 TJ = 125C 100C 10 1 75C 0.1 0.01 0.001 25C 0 5 25 10 15 20 VF, REVERSE VOLTAGE (VOLTS) 30 35 0.01 0 Figure 3. Maximum Reverse Current C, CAPACITANCE (pF) TJ = 25C 1000 100 1 5 25 10 15 20 VR, REVERSE VOLTAGE (VOLTS) 30 35 Figure 4. Typical Reverse Current TYPICAL MAXIMUM 10 VR, REVERSE VOLTAGE (VOLTS) Figure 5. Maximum and Typical Capacitance 2 Rectifier Device Data MBRD835L 16 14.4 TJ = 125C 12.8 RJA = 6C/W dc (RESISTIVE LOAD) 11.2 9.6 SQUARE WAVE IPK IAV 8 + (CAPACITIVE 5 LOAD) 6.4 4.8 10 3.2 1.6 0 20 80 85 90 95 100 105 110 115 TC, CASE TEMPERATURE (C) 120 125 IF(AV), AVERAGE FORWARD CURRENT (AMPS) IF(AV), AVERAGE FORWARD CURRENT (AMPS) TYPICAL CHARACTERISTICS 130 8 dc 6 (RESISTIVE LOAD) 5 dc 4 TJ = 125C (RESISTIVE LOAD) 3.5 3 SQUARE WAVE 2.5 RJA = 80C/W SURFACE MOUNTED ON MININUM RECOMMENDED PAD SIZE IPK IAV + (CAPACITIVE 5 LOAD) 2 1.5 10 1 20 0.5 0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 TA, AMBIENT TEMPERATURE (C) Figure 8. Current Derating, Free Air Rectifier Device Data IPK IAV SQUARE WAVE + 5 (CAPACITIVE LOAD) 3 2 10 1 20 0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 TA, AMBIENT TEMPERATURE (C) Figure 7. Current Derating P F(AV), AVERAGE FORWARD POWER DISSIPATION (WATTS) IF(AV), AVERAGE FORWARD CURRENT (AMPS) 5 SURFACE MOUNTED ON MININUM RECOMMENDED PAD SIZE 4 Figure 6. Current Derating, Infinite Heatsink 4.5 RJA = 40C/W TJ = 125C 7 8 TJ = 125C 7 IPK IAV 6 (RESISTIVE LOAD) + 5 (CAPACITIVE LOAD) SQUARE WAVE dc 5 10 4 20 3 2 1 0 0 1.5 7.5 9 10.5 12 13.5 3 4.5 6 IF(AV), AVERAGE FORWARD CURRENT (AMPS) 15 Figure 9. Forward Power Dissipation 3 MBRD835L PACKAGE DIMENSIONS 0.165 4.191 0.100 2.54 0.118 3.0 0.063 1.6 -T- SEATING PLANE inches mm E R DPAK FOOTPRINT 4 Z A S 1 2 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3 U K F J L H D G 0.243 6.172 C B V 0.190 4.826 STYLE 3: PIN 1. 2. 3. 4. 2 PL 0.13 (0.005) M T ANODE CATHODE ANODE CATHODE CASE 369A-13 ISSUE Y DPAK DIM A B C D E F G H J K L R S U V Z INCHES MIN MAX 0.235 0.250 0.250 0.265 0.086 0.094 0.027 0.035 0.033 0.040 0.037 0.047 0.180 BSC 0.034 0.040 0.018 0.023 0.102 0.114 0.090 BSC 0.175 0.215 0.020 0.050 0.020 --- 0.030 0.050 0.138 --- MILLIMETERS MIN MAX 5.97 6.35 6.35 6.73 2.19 2.38 0.69 0.88 0.84 1.01 0.94 1.19 4.58 BSC 0.87 1.01 0.46 0.58 2.60 2.89 2.29 BSC 4.45 5.46 0.51 1.27 0.51 --- 0.77 1.27 3.51 --- Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 303-675-2140 or 1-800-441-2447 JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 81-3-3521-8315 Mfax: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 4 CODELINE TO BE PLACED HERE Rectifier Device Data MBRD835L/D